aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ep93xx/gpio.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-01-25ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio modeHartley Sweeten1-0/+7
The EP93xx C and D GPIO ports are multiplexed with the Keypad Interface peripheral.  At power-up they default into non-GPIO mode with the Key Matrix controller enabled so these ports are unusable for GPIO.  Note that the Keypad Interface peripheral is only available in the EP9307, EP9312, and EP9315 processor variants. The keypad support will clear the DeviceConfig bits appropriately to enable the Keypad Interface when the driver is loaded.  And, when the driver is unloaded it will set the bits to return the ports to GPIO mode. To make these ports available for GPIO after power-up on all EP93xx processor variants, set the KEYS and GONK bits in the DeviceConfig register. Similarly, the E, G, and H ports are multiplexed with the IDE Interface peripheral.  At power-up these also default into non-GPIO mode.  Note that the IDE peripheral is only available in the EP9312 and EP9315 processor variants. Since an IDE driver is not even available in mainline, set the EONIDE, GONIDE, and HONIDE bits in the DeviceConfig register so that these ports will be available for GPIO use after power-up. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: ep93xx: irq_data conversion.Lennert Buytenhek1-18/+18
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Acked-by: Ryan Mallon <ryan@bluewatersys.com>
2010-04-07ARM: 6029/1: ep93xx: gpio.c: local functions should be staticHartley Sweeten1-3/+3
The functions ep93xx_gpio_update_int_params and ep93xx_gpio_int_mask are not exported and should be static. This was overlooked when moving the code from core.c. Also, change a comment to better indicate what the code is for. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-24ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.cHartley Sweeten1-4/+231
The GPIO support in core.c handles the interrupt support for GPIO ports A, B, and F. The gpiolib implementation in gpio.c needs to access the function ep93xx_gpio_int_mask when a gpio pin is made an output and ep93xx_gpio_update_int_params in order to update the registers. Moving this support from core.c to gpio.c allows making the two functions static. It also keeps all the GPIO handling together in one file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17[ARM] 5605/1: Fix ep93xx gpio.c headersRyan Mallon1-0/+1
Fix a number of build errors in ep93xx gpio.c due to to missing irq.h Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5575/1: ep93xx: Show gpio interrupt type in debugfs output.Hartley Sweeten1-5/+51
ep93xx: Show gpio interrupt type in debugfs output. EP93xx uses a private implementation for the debugfs output. Modify this output so it includes the interrupt type when the gpio is configured as an interrupt Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5574/1: ep93xx: gpio.c: fix header includes and __iomem pointersHartley Sweeten1-4/+4
Fix ep93xx gpio.c header includes and __iomem pointers. 1. <linux/gpio.h> should be included instead of <asm/gpio.h> 2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h> 3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be void __iomem pointers not unsigned int Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09Merge branches 'machtypes', 'core', 'ep93xx', 'ks8695', 'netdev' and 'sa1100' into develRussell King1-3/+3
2008-09-07[ARM] 5243/1: ep93xx: bugfix, GPIO ports C and F are swappedHartley Sweeten1-2/+2
In the GPIOLIB support for EP93xx ports C anf F are swapped. This patch correct it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-1/+1
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4988/1: Add GPIO lib support to the EP93xxRyan Mallon1-0/+158
Adds support for the generic GPIO lib to the EP93xx family. The gpio handling code has been moved from core.c to a new file called gpio.c. The GPIO based IRQ code has not been changed. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.