aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos4 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-07-06ARM: EXYNOS4: Set appropriate I2C device variantSylwester Nawrocki1-0/+6
Set up a correct I2C bus controller variant name for Exynos4. Without this change the I2C bus driver fails to acquire its clocks. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: Address a section mismatch w/ suspend issue.MyungJoo Ham1-1/+1
The section mismatch in headsmp.S made hotplug stop working after the first instance of suspend-to-RAM and its wakeup. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: fix improper gpio configurationNaveen Krishna Chatradhi1-1/+1
These pins are incorrectly configured for PCM2 configure them to SPDIF(_OUT & _EXT_CLK) Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: Fix card detection for sdhci 0 and 2Thomas Abraham1-6/+2
On SMDKV310 board, a card detect gpio pin is available that is directly connected to the io pad of the sdhci controller. Fix incorrect value of cd_type field in platform data for sdhci instance 0 and 2. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-06-28Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds1-0/+1
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: bcm63xx_uart: fix irq storm after rx fifo overrun. amba pl011: platform data for reg lockup and glitch v2 amba pl011: workaround for uart registers lockup tty: n_gsm: improper skb_pull() use was leaking framed data tty: n_gsm: Fixed logic to decode break signal from modem status TTY: ntty, add one more sanity check TTY: ldisc, do not close until there are readers 8250: Fix capabilities when changing the port type 8250_pci: Fix missing const from merges ARM: SAMSUNG: serial: Fix on handling of one clock source for UART serial: ioremap warning fix for jsm driver. 8250_pci: add -ENODEV code for Intel EG20T PCH
2011-06-07ARM: SAMSUNG: serial: Fix on handling of one clock source for UARTBoojin Kim1-0/+1
This patch fixes the way of comparison for handling of two or more clock sources for UART. For example, if just only one clock source is defined even though there are two clock sources for UART, the serial driver does not set proper clock up. Of course, it is problem. So this patch changes the condition of comparison to avoid useless setup clock and adds a flag 'NO_NEED_CHECK_CLKSRC' which means selection of source clock is not required. In addition, since the Exynos4210 has only one clock source for UART this patch adds the flag into its common_init_uarts(). Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-03ARM: EXYNOS4: Remove compiler warning on exynos4_pwm4_resumeKyungmin Park1-0/+2
Remove compiler warning when no CONFIG_PM arch/arm/mach-exynos4/time.c:209: warning: 'exynos4_pwm4_resume' defined but not used Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-06-03ARM: S5P: Fix compilation error for exynos4_defconfigTushar Behera3-1/+7
Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-06-01ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XXKukjin Kim2-2/+2
Basically, other S3C SoCs and S5PC100 use 'S3C_VA_USB_HSPHY' commonly. It should be changed to 'S3C_VA_USB_HSPHY' for common usage and others. Now happens build error on S5PC100. Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-28Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-366/+1
* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6: gpio/pch_gpio: Support new device ML7223 gpio: make gpio_{request,free}_array gpio array parameter const GPIO: OMAP: move to drivers/gpio GPIO: OMAP: move register offset defines into <plat/gpio.h> gpio: Convert gpio_is_valid to return bool gpio: Move the s5pc100 GPIO to drivers/gpio gpio: Move the s5pv210 GPIO to drivers/gpio gpio: Move the exynos4 GPIO to drivers/gpio gpio: Move to Samsung common GPIO library to drivers/gpio gpio/nomadik: add function to read GPIO pull down status gpio/nomadik: show all pins in debug gpio: move Nomadik GPIO driver to drivers/gpio gpio: move U300 GPIO driver to drivers/gpio langwell_gpio: add runtime pm support gpio/pca953x: Add support for pca9574 and pca9575 devices gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535
2011-05-26gpio: Move the exynos4 GPIO to drivers/gpioKyungmin Park2-366/+1
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-25Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stableRussell King4-0/+178
Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-23Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-24/+6
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (137 commits) ARM: bcmring: convert to use sp804 clockevents ARM: bcmring: convert to sp804 clocksource ARM: 6912/1: bcmring: Add clkdev table in init_early clockevents: ARM sp804: obtain sp804 timer rate via clks clockevents: ARM sp804: allow clockevent name to be specified clocksource: ARM sp804: obtain sp804 timer rate via clks clocksource: ARM sp804: allow clocksource name to be specified clocksource: convert OMAP1 to 32-bit down counting clocksource clocksource: convert MXS timrotv2 to 32-bit down counting clocksource clocksource: convert SPEAr platforms 16-bit up counting clocksource clocksource: convert Integrator/AP 16-bit down counting clocksource clocksource: convert W90x900 24-bit down counting clocksource clocksource: convert ARM 32-bit down counting clocksources clocksource: convert ARM 32-bit up counting clocksources clocksource: add common mmio clocksource ARM: update sa1100 to reflect PXA updates ARM: omap1: convert to using readl/writel instead of volatile struct ARM: omap1: delete useless interrupt handler ARM: s5p: consolidate selection of timer register ARM: 6939/1: fix missing 'cpu_relax()' declaration ...
2011-05-23Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds8-1/+232
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (205 commits) USB: EHCI: Remove SPARC_LEON {read,write}_be definitions from ehci.h USB: UHCI: Support big endian GRUSBHC HC sparc: add {read,write}*_be routines USB: UHCI: Add support for big endian descriptors USB: UHCI: Use ACCESS_ONCE rather than using a full compiler barrier USB: UHCI: Add support for big endian mmio usb-storage: Correct adjust_quirks to include latest flags usb/isp1760: Fix possible unlink problems usb/isp1760: Move function isp1760_endpoint_disable() within file. USB: remove remaining usages of hcd->state from usbcore and fix regression usb: musb: ux500: add configuration and build options for ux500 dma usb: musb: ux500: add dma glue layer for ux500 usb: musb: ux500: add dma name for ux500 usb: musb: ux500: add ux500 specific code for gadget side usb: musb: fix compile error usb-storage: fix up the unusual_realtek device list USB: gadget: f_audio: Fix invalid dereference of initdata EHCI: don't rescan interrupt QHs needlessly OHCI: fix regression caused by nVidia shutdown workaround USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage ...
2011-05-23Merge branch 'devel-stable' into for-linusRussell King1-4/+2
Conflicts: arch/arm/Kconfig arch/arm/mach-ns9xxx/include/mach/uncompress.h
2011-05-23Merge branches 'consolidate-clksrc', 'consolidate-flash', 'consolidate-generic', 'consolidate-smp', 'consolidate-stmp' and 'consolidate-zones' into consolidateRussell King2-20/+4
2011-05-23ARM: consolidate SMP cross call implementationRussell King2-20/+4
Rather than having each platform class provide a mach/smp.h header for smp_cross_call(), arrange for them to register the function with the core ARM SMP code instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-11ARM: s5pv310: update IRQ combiner to use chained entry/exit functionsWill Deacon1-4/+2
This patch updates the IRQ combiner chained IRQ handler code to use the chained IRQ enter/exit functions in order to function correctly on primary controllers with different methods of flow control. This is required for the GIC to move to fasteoi interrupt handling. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-05-06ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI boardJoonyoung Shim2-0/+91
This patch is to support Atmel mXT touchscreen device to the NURI board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-05-06ARM: EXYNOS4: CPUIDLE SupportJaecheol Lee2-0/+87
This patch supports cpuidle framework for EXYNOS4210. Currently, Only one idle state is possible to use, but more idle states can be added following by this patch. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-24ARM / Samsung: Use struct syscore_ops for "core" power managementRafael J. Wysocki1-18/+27
Replace sysdev classes and struct sys_device objects used for "core" power management by Samsung platforms with struct syscore_ops objects that are simpler. This generally reduces the code size and the kernel memory footprint. It also is necessary for removing sysdevs entirely from the kernel in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-13ARM: EXYNOS4: Add usb ehci device to the NURI boardJoonyoung Shim2-0/+17
This patch is to support usb ehci device to the NURI board. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: EXYNOS4: Add usb host phy controlJoonyoung Shim6-1/+212
EXYNOS4 has 2 phys for usb host and usb device. This patch supports to control usb host phy of EXYNOS4. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-13ARM: S5P: Add usb ehci deviceJoonyoung Shim1-0/+3
This patch adds usb ehci device definition for samsung s5p cpus. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi4-5/+5
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner2-4/+3
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Reorder irq_set_ function callsThomas Gleixner1-1/+1
Reorder irq_set_chip() irq_set_chip_data() irq_set_handler() to irq_set_chip() irq_set_handler() irq_set_chip_data() so the next patch can combine irq_set_chip() and irq_set_handler() to irq_set_chip_and_handler(). Automated conversion with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner2-14/+15
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28ARM: EXYNOS4: Fix addruart macroThomas Abraham1-2/+2
Fix incorrect conditional execution of ldr instructions in addruart macro. Signed-off-by: Thomas Abraham <thomas.abraham@samsung.com> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-28ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210Jeongtae Park1-1/+1
This patch fixes smsc9215 irq ploarity configuration of SMDKC210. We can change type of EINT(5) as HIGH, but it's better to change IRQ output of smsc9215 as an active low because smsc's IRQ line has been pull-up. Signed-off-by: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-28ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310Jeongtae Park1-1/+1
This patch fixes smsc9215 irq ploarity configuration of SMDKV310. We can change type of EINT(5) as HIGH, but it's better to change IRQ output of smsc9215 as an active low because smsc's IRQ line has been pull-up. Signed-off-by: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-28ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORMKukjin Kim2-2/+7
This patch fixes following build warnings. warning: (MACH_ARMLEX4210) selects SATA_AHCI_PLATFORM which has unmet direct dependencies (ATA) And adds EXYNOX4_DEV_AHCI for building machines which are not suppoort for AHCI feature on board. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+2
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (35 commits) ARM: Update (and cut down) mach-types ARM: 6771/1: vexpress: add support for multiple core tiles ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings ARM: 6751/1: vexpress: select applicable errata workarounds in Kconfig ARM: 6753/1: omap4: Enable ARM local timers with OMAP4430 es1.0 exception ARM: 6759/1: smp: Select local timers vs broadcast timer support runtime ARM: pgtable: add pud-level code ARM: 6673/1: LPAE: use phys_addr_t instead of unsigned long for start of membanks ARM: Use long long format when printing meminfo physical addresses ARM: integrator: add Integrator/CP sched_clock support ARM: realview/vexpress: consolidate SMP bringup code ARM: realview/vexpress: consolidate localtimer support ARM: integrator/versatile: consolidate FPGA IRQ handling code ARM: rationalize versatile family Kconfig/Makefile ARM: realview: remove old AMBA device DMA definitions ARM: versatile: remove old AMBA device DMA definitions ARM: vexpress: use new init_early for clock tree and sched_clock init ARM: realview: use new init_early for clock tree and sched_clock init ARM: versatile: use new init_early for clock tree and sched_clock init ARM: integrator: use new init_early for clock tree init ...
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds64-0/+9382
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-15ARM: EXYNOS4: Implement Clock gating for System MMUKyongHo Cho4-11/+111
This patch includes the implementation of the clock gating for System MMU. Initially, all System MMUs are not asserted the system clock. Asserting the system clock to a System MMU is enabled only when s5p_sysmmu_enable() is called. Likewise, it is disabled only when s5p_sysmmu_disable() is called. Therefore, clock gating on System MMUs are still invisible to the outside of the System MMU driver. Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Enhancement of System MMU driverKyongHo Cho3-85/+30
This patch includes the following enhancements for System MMU: - Enhanced readability - Removal of unused data structures or their members - Simplified function definitions - Corrections of some logical errors - Full compliance with Linux coding style - Simpler way of registering callback functions of System MMU faults Signed-off-by: KyongHo Cho <pullip.cho@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add support for gpio interruptsMarek Szyprowski2-5/+25
This patch adds support for gpio interrupts on Samsung EXYNOS4 platform. Common s5p-gpioint.c code is used for handling gpio interrupts. Each gpio line that needs gpio interrupt support must be later registered with s5p_register_gpio_interrupt() function. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add missing GPYx banksMarek Szyprowski2-1/+71
This patch adds missing GPYx gpio banks on Samsung EXYNOS4 platform. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add keypad device to the SMDKV310Naveen Krishna Ch2-0/+26
This patch is to support keypad device to the SMDKV310 board. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Update clocks for keypadNaveen Krishna Ch1-0/+5
The keypad IF on EXYNOS4 uses 100MHz from PERIR functional block for clocks, this patch updates the same. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Update keypad base addressNaveen Krishna Ch1-0/+4
This patch updates the keypad IF base address in the memory map for EXYNOS4. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add keypad device helpersNaveen Krishna Ch3-0/+41
This patch adds the samsung_keypad_cfg_gpio() for EXYNOS4. Now, this helpers are only for keypad operating in PORT-0. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-15ARM: EXYNOS4: Add support for SATA on ARMLEX4210Abhilash Kesavan7-0/+279
Adds the device definitions, platform specific initialization and clocks for SATA on ARMLEX4210. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12Merge branch 'next-exynos4-pm' into for-nextKukjin Kim7-18/+723
Conflicts: arch/arm/mach-exynos4/include/mach/regs-pmu.h
2011-03-12ARM: EXYNOS4: Update HRT for supporting PMJaecheol Lee1-0/+16
This patch updates HRT driver for supporting PM. The resume function of PWM4 timer which is used clocksource is needed when kernel is resuming for restarting. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: EXYNOS4: Suspend to RAM SupportJaecheol Lee4-0/+546
This patch adds support suspend to ram for EXYNOS4210. As a note, this includes function of outer cache flush because it is used before entering PM. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: EXYNOS4: Add PMU and CMU Registers for PMJaecheol Lee2-11/+154
This patch adds definitions of PMU and CMU registers for EXYNOS4 PM. Signed-off-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-12ARM: S5P: Add platform definitions for FIMC3Sylwester Nawrocki3-0/+21
Add support for fourth FIMC platform device definition and define resources for FIMC modules on EXYNOS4 machines. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add support for common MIPI CSIS/DSIM D-PHY controlSylwester Nawrocki2-1/+8
Add common code for MIPI-CSIS and MIPI-DSIM drivers to support their corresponding D-PHY's enable and reset control. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-03-11ARM: S5P: Add platform helpers for camera GPIO configurationSylwester Nawrocki3-0/+50
Add functions for configuration of the parallel camera bus pins on S5PV210 and Exynos4 SoC. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.