aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/omap_hwmod_44xx_data.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-03-09OMAP4: hwmod_data: Add address space and irq in L3 hwmod.sricharan1-0/+38
Add the address spaces, irqs of the l3 interconnect to the hwmod data. The hwmod change is aligned with Benoit Cousson. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: sricharan <r.sricharan@ti.com> Acked-by: Benoit Cousson <b-cousson@ti.com>
2011-03-04Revert "OMAP4: hwmod data: Prevent timer1 to be reset and idle during init"Benoit Cousson1-1/+0
The following commit: 38698be: OMAP2+: clockevent: set up GPTIMER clockevent hwmod right before timer init Fixed properly the issue with early init for the timer1 So reverts commit 3b03b58dab847883e6b9a431558c7d8e43fa94c6 that is now generated a warning at boot time. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-02Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linusTony Lindgren1-5/+21
Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
2011-03-01OMAP: hwmod data: Add dev_attr and use in the host driverKishore Kadiyala1-0/+8
Add a device attribute to hwmod data of omap2430, omap3, omap4. Currently the device attribute holds information regarding dual volt MMC card support by the controller which will be later passed to the host driver via platform data. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-01OMAP4: hwmod data: enable HSMMCAnand Gadiyar1-5/+5
Enabling hsmmc hwmod for OMAP4 Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Benoit Cousson<b-cousson@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-28OMAP2+: hwmod: rename some init functionsPaul Walmsley1-1/+1
Rename omap_hwmod_init() to omap_hwmod_register(). Rename omap_hwmod_late_init() to omap_hwmod_setup_all(). Also change all of the callers to reflect the new names. While here, update some copyrights. Suggested by Tony Lindgren <tony@atomide.com>. N.B. The comment in mach-omap2/serial.c may no longer be correct, given recent changes in init order. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2011-02-24OMAP4: hwmod: Naming of address spaceKishon Vijay Abraham I1-0/+8
Added a name to address space belonging to SDMA and MPU facilitating the driver to get the address space info by name. Added a revision member inorder to facilitate the driver to differentiate between mcbsp in different omap. Also added a platform_get_irq in probe to get irq number by index since from OMAP4, there will be a single irq line. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-22OMAP4: hwmod data: Prevent timer1 to be reset and idle during initBenoit Cousson1-0/+1
Since the timer1 is now started before the hwmod_init, we cannot reset it and idle it anymore. Add the appropriate flags to prevent the hwmod framework to do that. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-21OMAP4: hwmod data: Add rev and dev_attr fields in McSPIBenoit Cousson1-0/+26
- Add a rev attribute to identify various McSPI IP version. - Add a dev_attr structure to provide the number of chipselect supported by the instance. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17OMAP4: hwmod data: Add USBOTGBenoit Cousson1-1/+95
OMAP4 hwmod data structures are populated with base address, L3 and L4 interface clocks, IRQs and sysconfig register details. As per OMAP USBOTG specification, need to configure the USBOTG to smart idle/standby or no idle/standby during data transfer and force idle/standby when not in use to support retention and offmode. By setting HWMOD_SWSUP_SIDLE and HWMOD_SWSUP_MSTANDBY flags,framework will take care of configuring to no idle/standby when module is enabled and force idle/standby when idled. Signed-off-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Hema HK <hemahk@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Felipe Balbi <balbi@ti.com> [b-cousson@ti.com: Fix position, opt_clk, and author]
2011-02-17OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPUBenoit Cousson1-16/+993
Add more hwmod structures but keep them commented out for the moment until the driver adaptation to hwmod / omap_device is done. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com>
2011-02-17OMAP4: hwmod data: Add McBSPBenoit Cousson1-4/+289
Add mcbsp data including a revision member in hwmod_class in order to provide mcbsp revision information in different omap. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Charulatha V <charu@ti.com> [b-cousson@ti.com: Remove the mcbsp4 memory name, re-order properly the structures]
2011-02-17OMAP4: hwmod data: Add DMICBenoit Cousson1-1/+93
Add HWMOD entries for the OMAP DMIC. The HWMOD entires define the system resource requirements for the driver such as DMA addresses, channels, and IRQ's. Placing this information in the HWMOD database allows for more generic drivers to be written and having the specific implementation details defined in HWMOD. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: David Lambert <dlambert@ti.com> [b-cousson@ti.com: Change the wrong hwmod name, add missing flag and re-order structures]
2011-02-17OMAP4: hwmod data: Add mailboxBenoit Cousson1-1/+67
Mailbox hwmod data for omap4. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com> [b-cousson@ti.com: Re-order the structures and remove the irq line name]
2011-02-17OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENCBenoit Cousson1-8/+604
Add dss, dispc, dsi1, dsi2, hdmi, rfbi and venc hwmods. In OMAP4 there are severals IPs that can be reached by differents interconnect paths depending of the access initiator (MPU vs. SDMA). In the case of the DSS, both L3 direct path and L4 CFG path can be used to access all the DSS IPs. The two ocp_ip already exists to support the two address spaces. +------------+-- L3_MAIN --+ MPU IP | | +-- L4_CFG --+ L3 main address range is specified first, since it is used by default. dss is also considered as an IP as dispc, rfbi, and named as dss_core. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> [b-cousson@ti.com: Re-organize structures to match file convention and remove irq entry from dss_hwmod]
2011-02-17OMAP4: hwmod data: Add timerBenoit Cousson1-11/+622
Add the data for the 11 timers IPs. OMAP4 contains two differents IP variants for the timers: - 8 x regular timer (3, 4, 5, 6, 7, 8, 9 & 11) - 3 x 1ms timer (1, 2 & 10) The regular timers registers programming model was changed due to the adaptation to the new IP interface. Unfortunately the 1ms version still use the previous programming model. The driver will have to take care of theses differences. Please note that the capability and the partitioning is also different depending of the instance. - timer 1 is inside the wakeup domain - timers 5, 6, 7 & 8 are inside in the ABE (audio backend) - timers 2, 3, 4, 9, 10 & 11 are inside the PER power domain The timer was previously named gptimerX or dmtimerX, it is now simply named timerX. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> [b-cousson@ti.com: Fix alignement in class attribute, re-order flags and update the changelog]
2011-02-17OMAP4: hwmod data: Add McSPIBenoit Cousson1-4/+245
Update omap4 hwmod file with McSPI info. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Kevin Hilman <khilman@ti.com>
2011-02-17OMAP4: hwmod data: Add hwspinlockBenoit Cousson1-1/+64
Add hwspinlock hwmod data for OMAP4 chip Signed-off-by: Cousson, Benoit <b-cousson@ti.com> Signed-off-by: Hari Kanigeri <h-kanigeri2@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Paul Walmsley <paul@pwsan.com> [b-cousson@ti.com: Move the data to keep the original order and add missing SIDLE_SMART_WKUP flag]
2010-12-24OMAP4: hwmod data: Fix alignment and end of line in structurefieldsBenoit Cousson1-21/+22
In order to be fully aligned with the Python generator output, change a couple of fields. - Add tab in class structures to align attributes - Add a comma at the end of the following line to simplify the generation by having always the same eol: ".pre_shutdown = &omap2_wd_timer_disable," - Add a blank line before the first entry of the omap44xx_hwmods array. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Move the DMA structuresBenoit Cousson1-99/+97
The merge of the DMA series on top of the already modified omap_hwmod_data_44xx.c put the dma_system structures at the wrong position in the file. Re-order it properly. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Move the smartreflex structuresBenoit Cousson1-172/+169
The merge of the SR series on top of the already modified omap_hwmod_data_44xx.c moved the smartreflex structures at the wrong position in the file. - Re-order the structures properly. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Thara Gopinath <thara@ti.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-24OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsyscBenoit Cousson1-1/+2
Add the missing SIDLE_SMART_WKUP flag in idlemodes field of the smartreflex sysconfig structure. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Thara Gopinath <thara@ti.com> Tested-by: G, Manjunath Kondaiah <manjugk@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22OMAP4: hwmod: Add inital data for smartreflex modules.Benoit Cousson1-0/+168
This patch adds the hwmod details for OMAP4 smartreflex modules. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP4: hwmod data: Add SIDLE_SMART_WKUP modes to several IPsBenoit Cousson1-4/+8
uart, gpio, wd_timer and i2c does support the new smart-idle with wakeup added in OMAP4. Add the flag to allow the hwmod core to enable this mode when applicable. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-12-21OMAP4: hwmod & clock data: Fix GPIO opt_clks and ocp_if iclkBenoit Cousson1-6/+17
Fix opt clocks name in clock framework and hwmod. Add the missing iclk in the ocp_if structure. Add the HWMOD_CONTROL_OPT_CLKS_IN_RESET flag to ensure the the GPIO optional clock is enable during reset. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Tested-by: Charulatha V <charu@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-12-21OMAP4: hwmod data: Add IVA and DSPBenoit Cousson1-2/+241
Add IVA and DSP hwmods in order to allow the pm code to initialize properly the processors devices during omap2_init_processor_devices. It will avoid the following warnings. _init_omap_device: could not find omap_hwmod for iva _init_omap_device: could not find omap_hwmod for dsp Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP4: hwmod data: Fix missing address in DMM and EMIF_FWBenoit Cousson1-3/+23
The DMM is a piece of interconnect that need to be configured properly for the tiler functionnality. It thus exposes some configuration registers that were missing previously. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-12-21OMAP4: hwmod data: Add SYSS_HAS_RESET_STATUS flagBenoit Cousson1-5/+7
Update the data for GPIO, UART, WD_TIMER and I2C in order to support the new reset status flag introduce in the following commit: commit 2cb068149c365f1c2b10f2ece6786139527dcc16 OMAP: hwmod: Fix softreset status check for some new OMAP4 IPs Without this flag properly set, the reset is done, but the hwmod core code will not wait for the reset completion to continue its excecution. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Tested-by: Charulatha V <charu@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Govindraj.R <govindraj.raja@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP4: hwmod data: Fix hwmod entries orderBenoit Cousson1-450/+553
The original OMAP4 hwmod data files is fully generated from HW database. But since the file is introduced incrementaly along with driver that uses the data, it has to be splitted by the driver owner and then re-merged by the maintainer. Because of the similarity of the data, git is completely lost during such merge and thus the data does not look like the original one at the end. Re-order properly the structures to stay in sync with original data set. This makes it much easier to diff the autogenerated script output with what's in mainline, see differences, and generate patches for those diffs. The goal is to stay in sync with the autogenerated data from now on. Add a comment that does contain all the IPs that can have a hwmod, but do not have it in the file for the moment. It gives a good indication of the progress. Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: updated to apply against current core integration branch, commit message slightly amplified; fixed opt_clks_cnt whitespace] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Govindraj.R <govindraj.raja@ti.com> Cc: Charulatha V <charu@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP4: PRCM: reorganize existing OMAP4 PRCM header filesPaul Walmsley1-1/+3
Split the existing cm44xx.h file into cm1_44xx.h and cm2_44xx.h files so they match their underlying OMAP hardware modules. Add clockdomain offset information. Add header files for the MPU local PRCM, prcm_mpu44xx.h, and for the SCRM, scrm44xx.h. SCRM register offsets still need to be added; TI should do this. Move the "_MOD" macros out of the prcm-common.h header file, into the header file of the hardware module that they belong to. For example, OMAP4430_PRM_*_MOD macros have been moved into the prm44xx.h header. Adjust #includes of all files that used the old PRCM header file names to point to the new filenames. The autogeneration scripts have been updated accordingly. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-12-21OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanismPaul Walmsley1-2/+4
The OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly. Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device. To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog. Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)" Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-20OMAP4: hwmod data: add system DMABenoit Cousson1-0/+102
Add OMAP4 DMA hwmod data. In addition to original dma hwmod data, the following changes are added. 1. DMA device attributes structure is introduced for diffenrenciating OMAP cpu's based on DMA features. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-07OMAP4: hwmod data: Add GPIOBenoit Cousson1-0/+341
Add GPIO hwmod data for OMAP4 Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-09OMAP4: hwmod: add I2C hwmods for OMAP4430Benoit Cousson1-0/+237
Add hwmod structures for I2C controllers on OMAP4430. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-01manual merge for pm-hwmod-uart due to conflictsKevin Hilman1-0/+235
2010-09-29OMAP4: UART: Add uart1-4 hwmods data for omap4Benoit Cousson1-0/+235
Add uart1-4 hwmod data into omap4_hwmod data file. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-29OMAP4: hwmod data: Add watchdog timerBenoit Cousson1-0/+133
Add watchdog timer hwmod data for OMAP4 chip Note: wd_timer3 in enabled in the hwmod list but it is not yet supported by the watchdog driver. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Charulatha V <charu@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-23OMAP4: hwmod: Add initial data for OMAP4430 ES1 & ES2Benoit Cousson1-0/+482
The current version contains only the interconnects and the mpu hwmods. The remaining hwmods will be introduced by further patches on top of this one. - enable as well omap_hwmod.c build for OMAP4 Soc Please not that this file uses the new naming convention for naming HW IPs. This convention will be backported soon for previous OMAP2 & 3 data files. new name trm name ------------- ------------------- counter_32k synctimer_32k l3_main l3 timerX gptimerX / dmtimerX mmcX mmchsX / sdmmcX dma_system sdma smartreflex_X sr_X / sr? usb_host_fs usbfshost usb_otg_hs hsusbotg usb_tll_hs usbtllhs_config wd_timerX wdtimerX ipu cortexm3 / ducati dsp c6x / tesla iva ivahd / iva2.2 kbd kbdocp / keyboard mailbox system_mailbox mpu cortexa9 / chiron Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.