aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/balloon3.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2011-03-29arm: Fold irq_set_chip/irq_set_handlerThomas Gleixner1-2/+2
Use irq_set_chip_and_handler() instead. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29arm: Cleanup the irq namespaceThomas Gleixner1-4/+4
Convert to the new function names. Automated with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-21ARM: pxa2xx: reorganize I2C filesSebastian Andrzej Siewior1-2/+1
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-02-17ARM: P2V: avoid initializers and assembly using PHYS_OFFSETRussell King1-1/+1
As PHYS_OFFSET will be becoming a variable, we can't have it used in initializers nor assembly code. Replace those in generic code with a run-time initialization. Replace those in platform code using the individual platform specific PLAT_PHYS_OFFSET. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-13ARM: PXA SoCs: irq_data conversion.Lennert Buytenhek1-9/+14
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2010-12-20ARM: pxa: Add Balloon3 NAND ready checkMarek Vasut1-2/+6
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-20ARM: pxa: Update Balloon3 for new FPGA firmwareMarek Vasut1-22/+29
The new FPGA firmware in Balloon3 uses different methods to control it's bus control lines. In the new version, there are separate registers to set/clear bus control lines. This patch updates affected places. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-16ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()Marek Vasut1-1/+1
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre1-2/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-09ARM: pxa/balloon3: Disperse MFP configMarek Vasut1-36/+68
Move pin config to appropriate places and use it only if needed. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-By: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: encode IRQ number into .nr_irqsHaojian Zhuang1-0/+1
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05[ARM] pxa/balloon3: Add MAX1586 PMIC supportMarek Vasut1-0/+55
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Add NAND driverMarek Vasut1-0/+151
The NAND support is implemented through the gen_nand driver. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: PCF857x GPIO expander and LEDsMarek Vasut1-3/+81
Add supported for PCF8574A GPIO expander and LEDs attached to it. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: PCMCIA SupportMarek Vasut1-1/+12
This driver adds support for the on-board CF socket. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Machine file cleanupMarek Vasut1-123/+231
Modularize components of the Balloon3 board. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-08-05[ARM] pxa/balloon3: Machine file cleanupMarek Vasut1-99/+126
Logically separate parts of the file that are handled by one particular driver. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-03-02[ARM] pxa: add the missing AC97 pin configurationsEric Miao1-1/+11
Missing AC97 pin configurations are added where pxa_set_ac97_info() are called for all pxa25x/pxa27x platforms. Where no exact configuration is provided, use the default as in sound/arm/pxa2xx-ac97-lib.c Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02[ARM] pxa: simplify the LCD pin configuration for pxa27x platformsEric Miao1-20/+1
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: allow platforms to control which uarts are registeredRussell King1-0/+4
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: balloon3 (http://balloonboard.org/) base machine supportJonathan McDowell1-0/+361
So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.