aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/littleton.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-31Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull arm SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms, but also a few more things: New SoC support this release: - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc) - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core Cleanups of various platforms: - OMAP1 ams-delta does some GPIO cleanups - Davinci removes of at24 platform data - Samsung cleans up old wakeup, PM debug and secondary core boot code - Renesas moves around config options and PM code to drivers/soc for sharing with 64-bit and more consistency - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups - SoCFPGA adds explicit selection of ARM errata and removes some unused code This also contains a few patches that I had queued up as fixes for 4.20 but didn't send in before the release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: omap2: avoid section mismatch warning ARM: tegra: avoid section mismatch warning ARM: ks8695: fix section mismatch warning ARM: pxa: avoid section mismatch warning ARM: mmp: fix pxa168_device_usb_phy use on aspenite ARM: mmp: fix timer_init calls ARM: OMAP1: fix USB configuration for device-only setups ARM: OMAP1: add MMC configuration for Palm Tungsten E ARM: imx: fix dependencies on imx7ulp ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER MAINTAINERS: add drivers/soc/amlogic/ to amlogic list ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: davinci: da850-evm: remove unnecessary include ...
2018-12-17mmc: pxa: Use GPIO descriptor for powerLinus Walleij1-1/+0
After converting the PXA driver to use GPIO descriptors for card detect and write protect it is relatively simple to convert it to also use a descriptor for getting the optional power control GPIO. The polarity inversion flag can also go away from the platform data since this is indicated in the GPIO machine descriptor table. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17ARM: pxa: Delete platform data for CD/WPLinus Walleij1-4/+0
This deletes the platform data passed for card detect and write protect from various PXA machines. Make sure to keep .gpio_card_ro_invert as this is still in use by some machines and needed to set the right flag to the MMC core (will be cleaned up later). Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17ARM: pxa: Add gpio descriptor lookup tables for MMC CD/WPLinus Walleij1-1/+12
This adds GPIO descriptor look-up tables for a whole bunch of PXA boards with MMC card detect (CD) and write protect (WP) GPIO lines, so we can move away from the hard-coded GPIO numberspace. In some cases the platforms were compulsively including the <linux/gpio.h> header even if they weren't actually using it, and in these cases I simply replaced that inclusion with the more appropriate <linux/gpio/machine.h> which is what board files should be including most of the time. Cc: Daniel Mack <daniel@zonque.org> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-12ARM: pxa: avoid section mismatch warningArnd Bergmann1-1/+1
WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info() The function littleton_init_lcd() references the function __init pxa_set_fb_info(). This is often because littleton_init_lcd lacks a __init annotation or the annotation of pxa_set_fb_info is wrong. WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info() The function zeus_register_ohci() references the function __init pxa_set_ohci_info(). This is often because zeus_register_ohci lacks a __init annotation or the annotation of pxa_set_ohci_info is wrong. WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info() The function cm_x300_init_u2d() references the function __init pxa3xx_set_u2d_info(). This is often because cm_x300_init_u2d lacks a __init annotation or the annotation of pxa3xx_set_u2d_info is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-03-02mtd: nand: remove useless fields from pxa3xx NAND platform dataMiquel Raynal1-4/+2
The "enable arbiter" bit is available only for pxa3xx based platforms but it was experimentally shown that even if this bit is reserved, some Marvell platforms (64-bit) actually need it to be set. The driver always set this bit regardless of this property, which is harmless. Then this property is not needed. The "num_cs" field is always 1 and for a good reason, the old driver (pxa3xx_nand.c) could only handle one. The new driver that replaces it (marvell_nand.c) can handle more, but better use device tree for such description. As there is only one available chip select, there is no need for an array of partitions neither an array of partition numbers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-23mtd: nand: use Marvell reworked NAND controller driver with all platformsMiquel Raynal1-2/+2
Compile marvell_nand.c instead of pxa3xx_nand.c with all PXA based SoCs. Convert all board files and defconfigs so that the new driver is used everywhere instead of the old one. Board files using CONFIG_MTD_NAND_PXA3xx now use CONFIG_MTD_NAND_MARVELL instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2017-11-28ARM: pxa: move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is to be deprecated. Move this platform_data to the proper platform_data dir. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-11-28ARM: pxa: move declarations to proper placeWolfram Sang1-0/+1
Platform data is not the right place for such declarations, use devices.h in the mach-directory where the rest is located. Note that the some board files needed an additional include for this to work. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2017-05-23gpio: max732x: move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-01ARM: pxa: make more mach/*.h files localArnd Bergmann1-2/+2
Lots of header files are never included outside of a mach-pxa directory and do not need to be made visible in include/mach, so let's just move them all down one level. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-18Input: pxa27x-keypad - use matrix_keymap for matrix keysChao Xie1-3/+7
pxa27x-keypad includes matrix keys. Make use of matrix_keymap for the matrix keys. Signed-off-by: Chao Xie <chao.xie@marvell.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24ARM: delete struct sys_timerStephen Warren1-1/+1
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann1-4/+4
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-01-09Merge branch 'samsung/driver' into next/driversArnd Bergmann1-0/+1
Conflicts: arch/arm/mach-mxs/include/mach/common.h Pull in previous samsung conflict merges and do a trivial merge of an mxs double-add conflict. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-05ARM: restart: pxa: use new restart hookRussell King1-0/+1
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-23Merge branches 'drivers/macb-gem' and 'drivers/pxa-gpio' into next/driversArnd Bergmann1-2/+3
2011-11-14ARM: pxa: rename gpio_to_irq and irq_to_gpioHaojian Zhuang1-1/+1
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name confliction since multiple architecture will be built together. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQHaojian Zhuang1-2/+2
Avoid potential naming confliction since multiple architecture will be built in a single kernel. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-2/+3
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-09-11mtd: pxa3xx_nand: enable multiple chip select supportLei Wen1-2/+3
Current pxa3xx_nand controller has two chip select which both be workable. This patch enable this feature. Update platform driver to support this feature. Another notice should be taken that: When you want to use this feature, you should not enable the keep configuration feature, for two chip select could be attached with different nand chip. The different page size and timing requirement make the keep configuration impossible. Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-08-21ARM: mach-pxa: convert boot_params to atag_offsetNicolas Pitre1-1/+1
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-07-12ARM: pxa: enable MULTI_IRQ_HANDLER for all boardsEric Miao1-0/+1
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-03-26Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stableRussell King1-1/+1
Conflicts: arch/arm/mach-pxa/tosa.c
2011-03-21ARM: pxa2xx: reorganize I2C filesSebastian Andrzej Siewior1-1/+1
This patch moves the platform data definition from arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so it can be accessed from x86 the same way as on ARM. This change should make no functional change to the PXA code. The move is verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig pxa910_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-16ARM: pxa: clean up set_pxa_fb_infoRussell King - ARM Linux1-1/+1
set_pxa_fb_info() has been a long-standing wart in the naming scheme of the pxa_set_xxx_info() functions. This renames the function, and combines set_pxa_fb_parent() with set_pxa_fb_info(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-01-07Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-1/+1
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits) spi/omap: Fix DMA API usage in OMAP MCSPI driver spi/imx: correct the test on platform_get_irq() return value spi/topcliff: Typo fix threhold to threshold spi/dw_spi Typo change diable to disable. spi/fsl_espi: change the read behaviour of the SPIRF spi/mpc52xx-psc-spi: move probe/remove to proper sections spi/dw_spi: add DMA support spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs spi/dw_spi: Fix too short timeout in spi polling loop spi/pl022: convert running variable spi/pl022: convert busy flag to a bool spi/pl022: pass the returned sglen to the DMA engine spi/pl022: map the buffers on the DMA engine spi/topcliff_pch: Fix data transfer issue spi/imx: remove autodetection spi/pxa2xx: pass of_node to spi device and set a parent device spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes. spi/pxa2xx: Add chipselect support for Sodaville spi/pxa2xx: Consider CE4100's FIFO depth spi/pxa2xx: Add CE4100 support ...
2010-12-16ARM: pxa: Introduce pxa{25x,27x,3xx}_map_io()Marek Vasut1-1/+1
This patch introduces pxa2xx_map_io() and pxa3xx_map_io() to distinguish between PXA25x/PXA27x and PXA3xx memory mapping. Also, fixup for platforms broken after introducing pxa{25x,27x}_map_io() and pxa3xx_map_io() is included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-01arm/pxa2xx: reorgazine SSP and SPI header filesSebastian Andrzej Siewior1-1/+1
The PXA-SPI driver relies on some files / defines which are arm specific and are within the ARM tree. The CE4100 SoC which is x86 has also the SPI core. This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to include/linux where the CE4100 can access them. This move got verified by building the following defconfigs: cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig raumfeld_defconfig magician_defconfig Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-10-20arm: remove machine_desc.io_pg_offst and .phys_ioNicolas Pitre1-2/+0
Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-09ARM: pxa: moved pxa27x_keypad.h to platform pxa directoryMark F. Brown1-1/+1
mach-mmp utilizes pxa27x_keypad code so we need to move header to platform pxa directory. Signed-off-by: Mark F. Brown <mark.brown314@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-08ARM: pxa: encode IRQ number into .nr_irqsHaojian Zhuang1-0/+1
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecondEric Miao1-1/+1
delay_detect in HZ is confusing, convert it to be millisecond based. And thus remove those unnecessary call to msecs_to_jiffies() at runtime for this field. Other constants are converted assuming HZ == 100, which are basically true for those platforms. The assignment in csb726.c was incorrect, and is fixed in this patch as a result. Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marc Zyngier <maz@misterjones.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Daniel Mack <daniel@caiaq.de>
2010-05-11[ARM] pxa: remove unnecessary #include of <mach/ssp.h>Eric Miao1-1/+0
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-29[ARM] pxa/littleton: add UART3 GPIO configMarek Vasut1-0/+6
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01[ARM] pxa: allow platforms to control which uarts are registeredRussell King1-0/+4
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01pxa3xx_nand: move pxa3xx_nand.h common into plat directoryHaojian Zhuang1-2/+2
Since the same nand controller is shared between ARCH_PXA and ARCH_MMP. Move the pxa3xx_nand.h from mach directory to plat directoy. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmcEric Miao1-38/+5
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05[ARM] pxa/littleton: add support for the Micro-SD slot (MMC1)Eric Miao1-0/+63
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs fieldMike Rapoport1-16/+1
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: move mach/i2c.h to plat/i2c.hEric Miao1-1/+1
Signed-off-by: Paul Shen <paul.shen@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27[ARM] pxa/littleton: add missing da9034 touchscreen supportEric Miao1-0/+9
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usageEric Miao1-2/+1
Considering the header mess ATM, it is not always possible to include the correct header files within board code. Let's keep this simple: <mach/pxa25x.h> - for pxa25x based platforms <mach/pxa27x.h> - for pxa27x based platforms <mach/pxa300.h> - for pxa300 based platforms <mach/pxa320.h> - for pxa320 based platforms <mach/pxa930.h> - for pxa930 based platforms NOTE: 1. one header one board file, they are not compatible (i.e. they have conflicting definitions which won't compile if included together). 2. Unless strictly necessary, the following header files are considered to be SoC files use _only_, and is not recommended to be included in board code: <mach/hardware.h> <mach/pxa-regs.h> <mach/pxa2xx-regs.h> <mach/pxa3xx-regs.h> <mach/mfp.h> <mach/mfp-pxa2xx.h> <mach/mfp-pxa25x.h> <mach/mfp-pxa27x.h> <mach/mfp-pxa3xx.h> <mach/mfp-pxa300.h> <mach/mfp-pxa320.h> <mach/mfp-pxa930.h> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)Eric Miao1-0/+73
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>Eric Miao1-1/+1
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-09-23[ARM] pxa/littleton: add support for SPI-based TDO24M LCD panel driverEric Miao1-156/+49
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King1-9/+9
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King1-1/+1
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-12[ARM] pxa: make littleton to use the new smc91x platform dataEric Miao1-0/+9
Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] pxa: add pxa3xx NAND support for littletonEric Miao1-0/+53
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Sergey Podstavin <spodstavin@ru.mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.