aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-08-28[ARM] 4557/1: Fix PXA irq gpio initializationSamuel1-1/+1
As pointed out by Jrgen, we are overflowing the number of GPIOs in pxa_init_irq_gpio(). I'm seeing the same problem on my HTC Universal PXA270 based PDA. According to Eric, the function argument is the number of GPIOs, so we should keep the semantics and reduce the number of iteration by 1. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Jrgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4507/1: pxa2xx clock_event_deviceBill Gatliff1-130/+128
Reimplements arch/arm/mach-pxa/time.c using a clock_event_device based on OSMR0. Tested on PXA270, linux-2.6.22+arm:pxa patches. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4475/2: EM-x270 board supportMike Rapoport3-0/+359
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific onesEric Miao3-46/+75
1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke the corresponding _suspend functions, thus remove all those ugly #ifdef .. #endif out of sleep.S 2. move the declarations of those suspend functions to pm.h note: this is not a clean enough solution until all the pxa25x and pxa27x specific part is further removed out of sleep.S, sleep.S is supposed to contain generic code only Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4488/1: pxa: move pxa25x/pxa27x specific code out of pm.cEric Miao3-136/+234
1. introduce a structure pxa_cpu_pm_fns for pxa25x/pxa27x specific operations as follows: struct pxa_cpu_pm_fns { int save_size; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); void (*enter)(suspend_state_t state); } 2. processor specific registers saving and restoring are performed by calling the corresponding (*save) and (*restore) 3. pxa_cpu_pm_fns->save_size should be initialized to the required size for processor specific registers saving, the allocated memory address will be passed to (*save) and (*restore) memory allocation happens early in pxa_pm_init(), and save_size should be assigned prior to this (which is usually true, since pxa_pm_init() happens in device_initcall() 4. there're some redundancies for those SLEEP_SAVE_XXX and related macros, will be fixed later, one way possible is for the system devices to handle the specific registers saving and restoring Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4480/1: pxa: change the pxa device naming schemeEric Miao4-53/+53
1. for common devices across all the pxa variants, the names are changed to be: "pxa_device_xxx" 2. for pxa25x or pxa27x specific devices, the names are changed to be: "pxa25x_device_xxx", or "pxa27x_device_xxx" Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move platform devices to separate header fileRussell King14-12/+23
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move device registration into CPU-specific fileRussell King4-76/+83
This allows individual CPU support to determine which platform devices should be registered. Also fix a copy-n-paste bug in the I2C power platform device entry. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: remove boot time RTC initialisationRussell King1-9/+0
The RTC library code contains everything necessary to set the system time from the RTC; for similar reasons as the previous commit, it's far better to let the RTC library code sort this out rather than implement something which might not be appropriate for everyone. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: stop doing our own rtc management over suspendRussell King1-10/+0
Remove the RTC management over a suspend/resume cycle. Firstly, we may not be using the internal RTC for time keeping; some platforms have an external RTC for this inspite of the PXA having an internal RTC. Secondly, the RTC library code handles updating system time on resume. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma codeEric Miao3-13/+39
Since the number of dma channels varies between pxa25x and pxa27x, it introduces some specific code in dma.c. This patch moves the specific code to pxa25x.c and pxa27x.c and makes dma.c more generic. 1. add pxa_init_dma() for dma initialization, the number of channels are passed in by the argument 2. add a "prio" field to the "struct pxa_dma_channel" for the channel priority, and is initialized in pxa_init_dma() 3. use a general priority comparison with the channels "prio" field so to remove the processor specific pxa_for_each_dma_prio macro, this is not lightning fast as the original one, but it is acceptable as it happens when requesting dma, which is usually not so performance critical Signed-off-by: eric miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq()Eric Miao13-23/+33
/* should be ok this time, I aligned this patch to your arm:pxa2.mbox */ 1. move pxa25x specific IRQ initialization code to pxa25x_init_irq() and pxa27x code to pxa27x_init_irq(), remove pxa_init_irq() 2. replace all pxa_init_irq() with their PXA25x or PXA27x specific functions Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler()Eric Miao1-6/+4
1. use GPIO_IRQ_mask[] to select those bits of interest, actually only those "unmasked" GPIO IRQs with their corresponding bits in GPIO_IRQ_mask[] set to "1" should be checked 2. remove #ifdef PXA_LAST_GPIO > 96 .. #endif, GPIO_IRQ_mask[] is used to mask out the irrelevant bits, so that even though the GEDR3 on PXA25x is reserved, it will be masked, and the following code will never run. Another point is that GPIO85- GPIO95 bits within GEDR2 will also be masked out on PXA25x Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio()Eric Miao1-24/+17
move the GPIO IRQ initialization code to pxa_init_irq_gpio() Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low()Eric Miao1-15/+21
1. move low IRQ initialization code to pxa_init_irq_low() Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQSEric Miao1-10/+16
1. define PXA_GPIO_IRQ_BASE to be right after the internal IRQs, and define PXA_GPIO_IRQ_NUM to be 128 for all PXA2xx variants 2. make the code specific to the high IRQ numbers (32..64) to be PXA27x specific 3. add a function pxa_init_irq_high() to initialize the internal high IRQ chip, the invoke of this function could be moved to PXA27x specific initialization code Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] 4434/1: PXA: remove PXA_IRQ_SKIPEric Miao1-5/+5
1. PXA_IRQ_SKIP is defined to be 7 on PXA25x so that the first IRQ starts from zero. This makes IRQ numbering inconsistent between PXA25x and PXA27x. Remove this macro so that the same IRQ_XXXXX definition has the same value on both PXA25x and PXA27x. 2. make IRQ_SSP3..IRQ_PWRI2C valid only if PXA27x is defined, this avoids unintentional use of these macros on PXA25x Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare()Russell King2-26/+6
pxa_pm_prepare() tried to validate the suspend method type. As noted in previous commits: eb9289eb20df6b54214c45ac7c6bf5179a149026 9c372d06ce9ddf65e1393f9ea22a6d6bd5f96b42 e8c9c502690efd24b7055bf608e7a3c34216848b the checking of the suspend type in the 'prepare' method is the wrong place to do this; use the 'valid' method instead. This means that pxa_pm_prepare() can be entirely removed. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move pm_ops structure into CPU specific filesRussell King3-29/+34
Move the pm_ops structure into the PXA25x and PXA27x support files. Remove the old pxa_pm_prepare() function, and rename the both pxa_cpu_pm_prepare() functions as pxa_pm_prepare(). We'll fix that later. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: introduce cpu_is_pxaXXX macrosRussell King1-4/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: use mutexes instead of semaphoresRussell King1-8/+7
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: remove useless pxa_pm_finish() functionRussell King1-11/+0
pxa_pm_finish() does nothing but return zero. The core code does nothing with this return value, and will not try to call the finish method in the pm_ops structure if it is NULL. Therefore, we can remove this useless function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02[ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resumeRichard Purdie1-2/+2
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-20[ARM] spelling fixesSimon Arlott2-6/+6
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] 4362/1: trizeps4 updateJürgen Schindele1-13/+49
This update for trizeps4 SoM contains: - support for new TFT on more recent ConXS evalboard - correct partition of flash device - update of "trizeps4_defconfig" Signed-off-by: Jrgen Schindele (linux@schindele.name) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08Add IRQF_IRQPOLL flag on armBernhard Walle1-1/+1
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds7-18/+85
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits) [ARM] Add comments marking in-use ptrace numbers [ARM] Move syscall saving out of the way of utrace [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header [ARM] mm 10: allow memory type to be specified with ioremap [ARM] mm 9: add additional device memory types [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6 [ARM] iop: add missing parens in macro [ARM] mm 7: remove duplicated __ioremap() prototypes ARM: OMAP: fix OMAP1 mpuio suspend/resume oops ARM: OMAP: MPUIO wake updates ARM: OMAP: speed up gpio irq handling ARM: OMAP: plat-omap changes for 2430 SDP ARM: OMAP: gpio object shrinkage, cleanup ARM: OMAP: /sys/kernel/debug/omap_gpio ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon ARM: OMAP: Enable 24xx GPIO autoidling [ARM] 4318/2: DSM-G600 Board Support [ARM] 4227/1: minor head.S fixups [ARM] 4328/1: Move i.MX UART regs to driver ...
2007-04-30power management: implement pm_ops.valid for everybodyJohannes Berg1-0/+1
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: linux-pm@lists.linux-foundation.org Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-30rework pm_ops pm_disk_mode, kill misuseJohannes Berg1-4/+0
This patch series cleans up some misconceptions about pm_ops. Some users of the pm_ops structure attempt to use it to stop the user from entering suspend to disk, this, however, is not possible since the user can always use "shutdown" in /sys/power/disk and then the pm_ops are never invoked. Also, platforms that don't support suspend to disk simply should not allow configuring SOFTWARE_SUSPEND (read the help text on it, it only selects suspend to disk and nothing else, all the other stuff depends on PM). The pm_ops structure is actually intended to provide a way to enter platform-defined sleep states (currently supported states are "standby" and "mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured) allows a platform to support a platform specific way to enter low-power mode once everything has been saved to disk. This is currently only used by ACPI (S4). This patch: The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really seems to understand what it actually does. This patch clarifies the pm_disk_mode description. It also removes all the arm and sh users that think they can veto suspend to disk via pm_ops; not so since the user can always do echo shutdown > /sys/power/disk, they need to find a better way involving Kconfig or such. ACPI is the only user left with a non-zero pm_disk_mode. The patch also sets the default mode to shutdown again, but when a new pm_ops is registered its pm_disk_mode is selected as default, that way the default stays for ACPI where it is apparently required. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-21[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao6-15/+15
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] 4236/2: basic {enable,disable}_irq_wake() support for PXAPhilipp Zabel1-2/+70
pxa_set_gpio_wake handles GPIOs > 1, so IRQ_TO_GPIO has to be used instead of just substracting IRQ_GPIO0 from the irq number.
2007-04-21[ARM] Remove needless linux/ptrace.h includesRussell King1-1/+0
Lots of places in arch/arm were needlessly including linux/ptrace.h, resumably because we used to pass a struct pt_regs to interrupt handlers. Now that we don't, all these ptrace.h includes are redundant. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-08[ARM] 4249/1: Fix tosa compile failureRichard Purdie1-2/+1
Fix tosa compile failure from commit 32f3f49910c7e228839c1cd144dbed8da342703b Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-02[ARM] Yet more asm/apm-emulation.h stuffRussell King2-2/+4
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-26Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] CLPS7500 doesn't have IO ports [ARM] Fix more apm-emulation.h [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx. [ARM] 4233/1: nand/s3c2410.c: warning fix [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET [ARM] 4224/2: allow XIP kernel to boot again [ARM] 4232/1: AT91: Generic GPIO bug [ARM] 4231/1: AT91: Merge and typo fixes. [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1
2007-02-26[ARM] Fix more apm-emulation.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[PATCH] GPIO API: PXA wrapper cleanupPhilipp Zabel1-1/+27
Based on the discussion last december (http://lkml.org/lkml/2006/12/20/242), this patch: - moves the PXA_LAST_GPIO check into pxa_gpio_mode - fixes comment and includes in gpio.h - replaces the gpio_set/get_value macros with inline functions and adds a non-inline version to avoid code explosion when gpio is not a constant. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-19Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+24
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (117 commits) [ARM] 4058/2: iop32x: set ->broken_parity_status on n2100 onboard r8169 ports [ARM] 4140/1: AACI stability add ac97 timeout and retries [ARM] 4139/1: AACI record support [ARM] 4138/1: AACI: multiple channel support for IRQ handling [ARM] 4211/1: Provide a defconfig for ns9xxx [ARM] 4210/1: base for new machine type "NetSilicon NS9360" [ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PM [ARM] 4221/1: S3C2443: DMA support [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev [ARM] 4219/1: S3C2443: DMA source definitions [ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443 [ARM] 4217/1: S3C24XX: remove the dma channel show at startup [ARM] 4090/2: avoid clash between PXA and SA1111 defines [ARM] 4216/1: add .gitignore entries for ARM specific files [ARM] 4214/2: S3C2410: Add Armzone QT2410 [ARM] 4215/1: s3c2410 usb device: per-platform vbus_draw [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST [ARM] 4098/1: ARM: rtc_lock only used with rtc_cmos [ARM] 4137/1: Add kexec support [ARM] 4201/1: SMP barriers pair needed for the secondary boot process ... Fix up conflict due to typedef removal in sound/arm/aaci.h
2007-02-16[PATCH] clocksource: fixup is_continous changes on ARMThomas Gleixner1-1/+1
Fixup the is_contionous replacement by a flag field. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: john stultz <johnstul@us.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-09[APM] ARM: Convert to use shared APM emulation.Ralf Baechle3-3/+3
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-08[ARM] 4144/1: Fix for patch #4099/1 with CONFIG_I2C_PXA_SLAVE setGuennadi Liakhovetski1-0/+24
Switch the i2c-pxa driver to actually using the platform device information and let it handle the power i2c bus on pxa27x too. Original version of this patch didn't compile with CONFIG_I2C_PXA_SLAVE set. Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-30[ARM] 4066/1: correct a comment about PXA's sched_clock rangeNicolas Pitre1-1/+3
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-30[ARM] 4064/1: make pxa_get_cycles() staticNicolas Pitre1-4/+4
... and fix a comment as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-27/+23
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4017/1: [Jornada7xx] - Updating Jornada720.c [ARM] 3992/1: i.MX/MX1 CPU Frequency scaling support [ARM] Provide a method to alter the control register [ARM] 4016/1: prefetch macro is wrong wrt gcc's "delete-null-pointer-checks" [ARM] Remove empty fixup function [ARM] 4014/1: include drivers/hid/Kconfig [ARM] 4013/1: clocksource driver for netx [ARM] 4012/1: Clocksource for pxa [ARM] Clean up ioremap code [ARM] Unuse another Linux PTE bit [ARM] Clean up KERNEL_RAM_ADDR [ARM] Add sys_*at syscalls [ARM] 4004/1: S3C24XX: UDC remove implict addition of VA to regs [ARM] Formalise the ARMv6 processor name string [ARM] Handle HWCAP_VFP in VFP support code [ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver [ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support
2006-12-13[ARM] Remove empty fixup functionRussell King1-5/+0
Empty fixup functions are just a waste of code, and are not necessary. Remote them. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13[ARM] 4012/1: Clocksource for pxaSascha Hauer1-22/+23
Add a clocksource driver for pxa2xx systems Signed-off-by: Luotao Fu <lfu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day1-8/+8
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-07Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds8-23/+77
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
2006-12-07[ARM] Merge individual ARM sub-treesRussell King8-23/+77
Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3981/1: sched_clock for PXA2xxNicolas Pitre1-0/+60
Here's a 63-bit implementation of shed_clock() for PXA2xx. The actual period depends on the value of CLOCK_TICK_RATE and whether or not reduced scaling factors were provided for it. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.