aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2410/Kconfig (follow)
AgeCommit message (Collapse)AuthorFilesLines
2008-07-07[ARM] Acer n30: Add support for n35 and related devices.Christer Weinigel1-2/+3
Add support for the Acer N35 and related devices. Signed-off-by: Christer Weinigel <christer@weinigel.se> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: Add physmap device for all Simtec NOR equiped boards.Ben Dooks1-0/+7
Move to using the physmap platform device code to attached NOR flash on Simtec boards so that the old bast-flash driver can be safely removed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] BAST/VR1000: Move to using ata_platform (libata)Ben Dooks1-1/+8
Use the pata_platform driver to provide the IDE port drivers on the Simntec BAST and Thorcom VR1000 machines as a precursor to removing drivers/ide/arm/bast-ide.c This will mean that the system will need SCSI and SCSI disc support as a minimum, and any references to hdX will be changed to sdX. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-04-17[ARM] 4963/1: S3C2410 - add basic machine support for the TCT HammerDavid Anders1-0/+7
Add the TinCanTools Hammer board to list of supported machines in the arch/arm/mach-s3c2410 directory, as well as a default config entry. the mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as the mtd flash layout if enabled in the kernel configuration. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU supportBen Dooks1-0/+1
Update the Kconfig to create configuration options based on which CPUs are supported for the low level serial code. This means that the debug macros can be optimised for the type(s) of CPU that are being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4214/2: S3C2410: Add Armzone QT2410Ben Dooks1-0/+5
Patch from: Harald Welte <laforge@openmoko.org> Add support for the Armzone QT2410 system, with basic peripheral support for TFT display, SPI and LEDs. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluf.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu componentsBen Dooks1-295/+61
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4156/1: S3C24XX: Add CONFIG_S3C2410_GPIOBen Dooks1-0/+8
In preperation for splitting the arch-s3c2410 directory up, add a CONFIG_S3C2410_GPIO instead of implicitly making the .o for CONFIG_CPU_S3C2410 and CONFIG_CPU_S3C2440 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4155/1: S3C24XX: remove obj-dma-* from MakefileBen Dooks1-1/+14
In preperation for splitting the arch-s3c2410 directory up, remove the use of obj-dma-y in the Makefile and move to using CONFIG_S3C2440_DMA, CONFIG_S3C2412_DMA, etc. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-19[ARM] 4062/1: S3C24XX: Anubis and Osiris shuld have CONFIG_PM_SIMTECBen Dooks1-2/+8
Both CONFIG_MACH_OSIRIS and CONFIG_MACH_ANUBIS should select CONFIG_PM_SIMTEC. This patch moves the selection of CONFIG_PM_SIMTEC to the machines that require it, as currently done with other machines in the S3C2410 architecture. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-18[ARM] 4052/1: S3C24XX: Fix PM in arch/arm/mach-s3c2410/KconfigBen Dooks1-9/+6
Fix up the CONFIG_PM mixups in arch/arm/mach-s3c2410/Kconfig causing CONFIG_S3C2410_PM and CONFIG_PM_H1940 to get enabled permanently. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-0/+8
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (76 commits) [ARM] 4002/1: S3C24XX: leave parent IRQs unmasked [ARM] 4001/1: S3C24XX: shorten reboot time [ARM] 3983/2: remove unused argument to __bug() [ARM] 4000/1: Osiris: add third serial port in [ARM] 3999/1: RX3715: suspend to RAM support [ARM] 3998/1: VR1000: LED platform devices [ARM] 3995/1: iop13xx: add iop13xx support [ARM] 3968/1: iop13xx: add iop13xx_defconfig [ARM] Update mach-types [ARM] Allow gcc to optimise arm_add_memory a little more [ARM] 3991/1: i.MX/MX1 high resolution time source [ARM] 3990/1: i.MX/MX1 more precise PLL decode [ARM] 3986/1: H1940: suspend to RAM support [ARM] 3985/1: ixp4xx clocksource cleanup [ARM] 3984/1: ixp4xx/nslu2: Fix disk LED numbering (take 2) [ARM] 3994/1: ixp23xx: fix handling of pci master aborts [ARM] 3981/1: sched_clock for PXA2xx [ARM] 3980/1: extend the ARM Versatile sched_clock implementation from 32 to 63 bit [ARM] 3979/1: extend the SA11x0 sched_clock implementation from 32 to 63 bit period [ARM] 3978/1: macro to provide a 63-bit value from a 32-bit hardware counter ...
2006-12-07[ARM] 3999/1: RX3715: suspend to RAM supportBen Dooks1-0/+8
The RX3715 is similar to the H1940 in the way that suspend to RAM works, so we can use most of the extant support for the H1940 with only a few modifictions Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30Fix misc Kconfig typosMatt LaPlante1-1/+1
Fix various Kconfig typos. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03Still more typo fixesMatt LaPlante1-1/+1
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-27[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 seriesDavid Anders1-1/+1
this patch registers the wakeup irq, sets a gpio pin to indicate the status of system for suspend/resume operations, and adds the machine to the supported machines for use with the simtec-pm Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3858/1: S3C2412: power management codeBen Dooks1-0/+7
Add S3C2412 power management code, and move the core register saving in from s3c2412.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)David Anders1-0/+7
Add the AML M5900 series to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, and the timer source is configured. if selected in the kernel config the framebuffer registers and mtd partition information are set. This version of the patch has corrected formatting and removed the legacy procfs directory entry. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3840/1: S3C2412: Add machine VSTMSBen Dooks1-0/+6
Add new machine VSTMS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pmBen Dooks1-0/+9
Remove the S3C2410 specific items out of the core PM code. Add sysdev driver for all the S3C24XX series that used the S3C2410 PM code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3799/1: S3C2442: DMA channel mappingsBen Dooks1-0/+7
DMA channel mappings for the S3C2442 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-14[ARM] 3784/1: S3C2413: fix config for MACH_S3C2413/MACH_SMDK2413Ben Dooks1-0/+8
Patch from Ben Dooks These two machines are identical, and supported by the SMDK2413 configuration. When MACH_SMDK2413 is selected, we must also select MACH_S3C2413 to allow machine_is_smdk2413() or machine_is_s3c2413() to work. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440Ben Dooks1-2/+2
Patch from Ben Dooks Make CPU uppercase on the SMDK2440 KConfig entries-- Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3642/1: S3C24XX: Add machine SMDK2413Ben Dooks1-0/+6
Patch from Ben Dooks Add basic support for the Samsung/Aiji SMDK2413 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3635/1: S3C24XX: Add S3C2412 core cpu supportBen Dooks1-0/+14
Patch from Ben Dooks Add support for the Samsung S3C2412 and S3C2413 range of SoCs. This patch contains the core identification, debug macros, and basic register updates to get these to build. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22[ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocksBen Dooks1-0/+8
Patch from Ben Dooks Split the s3c2410 specific clocks from the core clock code, as part of the work to support more of the Samsung line of SoCs. The patch does not use the sysdev mechanism as the clocks are needed for the timer init, which is very early in the kernel init sequence. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3559/1: S3C2442: core and serial portBen Dooks1-0/+26
Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-04[ARM] Trivial typo fixesEgry Gabor1-1/+1
Trivial typo fixes in Kconfig files (ARM). Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01[ARM] 3440/1: [S3C2410] make SMDK2410 and SMDK2440 similarities commonBen Dooks1-0/+7
Patch from Ben Dooks The SMDK2410 and SMDK2440 boards have a number of items in common, including the LEDs, Ethernet, PCMCIA. Make a common SMDK support file. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3327/1: S3C2410 - add osiris machine supportBen Dooks1-0/+7
Patch from Ben Dooks Support for Simtec IM2440D20 CPU modules (Osiris) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08[ARM] 3132/1: S3C2410 - reset on decompression errorBen Dooks1-0/+8
Patch from Ben Dooks Force a watchdog reset if the system fails to decompress properly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13[ARM] 3007/1: BAST - add CONFIG_ISA to buildBen Dooks1-0/+1
Patch from Ben Dooks The Simtec EB2410ITX (BAST) has a PC/104 slot, and therefore we should enable CONFIG_ISA to allow the drivers for ISA peripherals to be selected Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2884/1: BAST - fix PC104 IRQ routingBen Dooks1-0/+8
Patch from Ben Dooks This has been broken for a while now, so fix the problems with the code, test and bring up to date. This also makes the code conditional on an Kconfig option Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2889/1: S3C2410 - Add machine AnubisBen Dooks1-0/+7
Patch from Ben Dooks Add the Simtec Anubis to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, the timer source is configured and the correct power-management is enabled. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-29[PATCH] ARM: 2764/1: S3C24XX - Common PM functions for Simtec boardsBen Dooks1-0/+5
Patch from Ben Dooks All current S3C24XX implementations from Simtec share the same requirements for suspend/resume information. This patch moves the save code out of the mach-bast.c file, and into it's own so it can be shared by all the current Simtec S3C24XX implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+169
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.