aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2412 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-05-20Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds1-3/+0
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (250 commits) ALSA: hda: Storage class should be before const qualifier ASoC: tpa6130a2: Remove CPVSS and HPVdd supplies ASoC: tpa6130a2: Define output pins with SND_SOC_DAPM_OUTPUT ASoC: sdp4430 - add sdp4430 pcm ops to DAI. ASoC: TWL6040: Enable earphone path in codec ASoC: SDP4430: Add support for Earphone speaker ASoC: SDP4430: Add sdp4430 machine driver ASoC: tlv320dac33: Avoid powering off while in BIAS_OFF ASoC: tlv320dac33: Use dev_dbg in dac33_hard_power function ALSA: sound/pci/asihpi: Use kzalloc ALSA: hdmi - dont fail on extra nodes ALSA: intelhdmi - add id for the CougarPoint chipset ALSA: intelhdmi - user friendly codec name ALSA: intelhdmi - add dependency on SND_DYNAMIC_MINORS ALSA: asihpi: incorrect range check ALSA: asihpi: testing the wrong variable ALSA: es1688: add pedantic range checks ARM: McBSP: Add support for omap4 in McBSP driver ARM: McBSP: Fix request for irq in OMAP4 OMAP: McBSP: Add 32-bit mode support ...
2010-05-19ARM: Merge for-2635/fb-updates1Ben Dooks1-1/+2
Merge branch 'for-2635/fb-updates1' into for-linus/samsung2
2010-05-19ARM: Merge for-2635/gpio2Ben Dooks3-26/+28
Merge branch 'for-2635/gpio2' into for-linus/samsung2
2010-05-18ARM: S3C24XX: Update missed gpio calls to use gpiolibBen Dooks1-5/+7
Update a couple of S3C24XX and S3C2412 files that are still using the GPIO number to register mapping calls to get the s3c_gpio_chip and use the base field from that. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18ARM: S3C24XX: Start cleanup of GPIO numberingBen Dooks1-4/+4
Start cleaning up the numbering of GPIO banks by removing the old bank start definitions currently being used by some of the header files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-12ARM: SAMSUNG: Remove old email address for ben-linux@fluff.orgBen Dooks2-4/+4
The address ben@fluff.org is old, ben-linux@fluff.org has been in use for a long time, and we should fixup all the occasions of the older address to avoid confusion. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-10ARM: S3C2416: Add arch supportYauhen Kharuzhy1-1/+2
Add arch/arm/mach-s3c2416 for support of the Samsung S3C2416 SoC. This patch adds support of the S3C2416 SoC, clocks, timers, and initial IRQ support (without support of secondary set of registers). Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com> [ben-linux@fluff.org: removed files to be reworked, fixed conflicts] [ben-linux@fluff.org: use s3c2443 reset instead of specific reset code] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-07ARM: S3C2412: DMA: Remove I2S FIFO addressJassi Brar1-3/+0
The S3C DMA API doesn't make use of hw_addr.to/from and also the FIFO addresses are provided from the I2S drivers. So these fields are redundant. This patch removes the hw_addr.to/from fields for I2S and the inclusion of header, paving way for the header to be moved closer to the I2S controller drivers. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-05-06ARM: S3C24XX: Drop s3c2410 specific s3c2410_gpio_cfgpin()Ben Dooks1-3/+4
The s3c_gpio_cfgpin() call should be functionally equivalent, so replace the s3c2410_gpio_cfgpin() calls in the s3c24xx code with s3c_gpio_cfgpin to allow moving away from a fixed GPIO number to register address mapping Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06ARM: H1940: Change mach-h1940 to use gpiolib APIBen Dooks1-4/+4
Change mach-h1940 to use the gpiolib calls instead of s3c2410_gpio directly. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06ARM: JIVE: Update mach-jive to use gpiolib APIBen Dooks1-10/+9
Change mach-jive to use gpiolib for the GPIO lines that are directly manipulated by it. Note, we ignore any errors from gpio_request(), unlikely to see any. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-02-21ARM: SAMSUNG: Remove dma-plat.h to allow plat-s3c64xx to be removedBen Dooks1-1/+1
dma-plat.h is the last file left in plat-s3c64xx, but to remove it we must also change the use of dma-plat.h by the core code and the s3c24xx implementation. Rename the s3c24xx dma-plat.h in the common plat-samsung directory as it may be used for other ports. Move the specific dma bits into the mach-s3c64xx directory and update the build as needed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C2412: Fixup commented out device in SMDK2413Ben Dooks1-1/+0
The SMDK2413 has a commented out device that does not have any setup data for it, so remove it for now. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: S3C: Rename s3c_device_usb to s3c_device_ohciBen Dooks3-3/+3
Prepare for the forthcoming device changes by renaming s3c_device_usb to s3c_device_ohci as this is what the device represents. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15ARM: SAMSUNG: Reduce size of struct clk.Ben Dooks1-19/+33
Reduce the size of struct clk by 12 bytes and make defining clocks with common implementation functions easier by moving the set_rate, get_rate, round_rate and set_parent calls into a new structure called 'struct clk_ops' and using that instead. This change does make a few clocks larger as they need their own clk_ops, but this is outweighed by the number of clocks with either no ops or having a common set of ops. Update all the users of this. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-09Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-4/+0
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-01ARM: S3C: Add NAND device platform data set callBen Dooks2-10/+11
2009-11-09Kconfig: Remove useless and sometimes wrong commentsMichael Roth1-4/+0
Additionally, some excessive newlines removed. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-17ARM: S3C: Add missing selection of S3C_DEV_NAND in machine Kconfigs.Ben Dooks1-0/+3
A number of machines that need s3c_device_nand present do not select this in their Kconfig entries. Add the necessary selection of the configuration S3C_DEV_NAND so that we avoid the following error: arch/arm/mach-s3c2410/built-in.o: In function `bast_map_io': arch/arm/mach-s3c2410/mach-bast.c:634: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `s3c2412_init_uarts': arch/arm/mach-s3c2412/s3c2412.c:109: undefined reference to `s3c_device_nand' arch/arm/mach-s3c2412/built-in.o: In function `jive_machine_init': arch/arm/mach-s3c2412/mach-jive.c:673: undefined reference to `s3c_device_nand' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C: CPUFREQ: Add debugfs support for cpufreqBen Dooks1-0/+2
Add debugfs support for the cpufreq driver to allow information about the system state to be exported to the user. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing supportBen Dooks2-0/+7
Add IO bank timing support for S3C2412/S3C2443. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2412: Update memory register mapping and definitionsBen Dooks1-0/+12
Update the mapping of the memory controler registers and add the missing definitions of the register block for the SSMC. The register contents definitions can be found in the pl093 header. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2412: CPUFREQ: Add core support.Ben Dooks3-0/+258
Add core support for frequency scaling on the S3C2412 SoC. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-10Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King4-26/+32
2009-05-21[ARM] S3C24XX: Merge devel-gpioBen Dooks2-25/+27
Merge branch 'devel-gpio' into for-rmk-devel
2009-05-18[ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-develBen Dooks1-1/+2
Merge branch 'next-s3c64xx-dma2' into for-rmk-devel Conflicts: arch/arm/plat-s3c64xx/Makefile
2009-05-18[ARM] S3C24XX: GPIO: Change to macros for GPIO numberingBen Dooks2-25/+25
Prepare to remove the large number of S3C2410_GPxn defines by moving to S3C2410_GPx(n) in arch/arm. The following perl was used to change the files: perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>Ben Dooks2-0/+2
Move all the gpio functions out of <mach/hardware.h> as this file is for defining the generic IO base addresses for the kernel IO calls. Make a new header <mach/gpio-fns.h> to take this and include it via the chain from <linux/gpio.h> which is what most of these files should be using (and will be changed as soon as possible). Note, this does make minor changes to some drivers but should not mess up any pending merges. CC: Richard Purdie <rpurdie@rpsys.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Add common USB OHCI device definitionBen Dooks1-0/+3
Add common definition for USB OHCI platform device, add a Kconfig to selectively compile it and add update all the users. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C2412: Add missing cache flush in suspend codeBen Dooks1-0/+3
The alterations to the suspend code missed adding a call to the cache flushing routines during the suspend path of the S3C2412. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h>Ben Dooks1-0/+1
The <mach/dma.h> is for the driver API for the DMA system and should not have anything relying on the CPU specific registers. Remove the registers to <plat/dma-regs.h> for the code that really needs to know about them. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: Move plat/dma.hBen Dooks1-1/+1
Move the platform dma.h to dma-plat.h to ensure it doen't get confused with plat/dma.h Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-17[ARM] JIVE: Fix sparse warnings about items which should be staticBen Dooks1-2/+2
Make 'jive_vgg2432a4_display' and 'jive_lcd_config' static as they are not exported, and are generating the following sparse warnings: mach-jive.c:280:26: warning: symbol 'jive_vgg2432a4_display' was not declared. Should it be static? mach-jive.c:313:28: warning: symbol 'jive_lcd_config' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] S3C: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include in arch/arm/mach-s3c2412/mach-jive.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07i2c-s3c2410: Simplify bus frequency calculationDaniel Silverstone1-2/+1
The platform data for the i2c-s3c2410 driver used to allow a min, max and desired frequency for the I2C bus. This patch reduces it to simply a desired frequency ceiling and corrects all the uses of the platform data appropriately. This means, for example, that on a system with a 66MHz fclk, a request for 100KHz will achieve 65KHz which is safe and acceptable, rather than 378KHz which it would have achieved without this change. Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> [ben-linux@fluff.org: tidy subject and description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-28Merge branch 'origin' into develRussell King1-2/+2
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-08[ARM] S3C: Rename sleep.S functions to be non-cpu specificBen Dooks1-1/+1
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to s3c_cpu_save to remove the CPU specific naming of these functions which are now in the generic PM code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08[ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.Ben Dooks1-1/+1
Since we have moved a large proportion of the PM code to the common support area, remove the cpu specific name from the initialisation function. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08[ARM] S3C: Move PM support functions to common locationBen Dooks1-2/+2
Start moving the PM code by moving all the common support functions to a common location in arch/arm/plat-s3c. With the move we rename the functions from s3cxxx_ to s3c_ to fit the new location. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-05S3C24XX: Move and update IIS headersBen Dooks1-2/+2
Move the IIS headers to their correct place. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-18[ARM] S3C: Remove unnecessary <linux/delay.h> includesBen Dooks1-1/+0
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks3-6/+11
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18Merge branch 'next-s3c64xx' into next-mergedBen Dooks1-6/+1
2008-12-18Merge branch 'next-s3c24xx' into next-mergedBen Dooks1-5/+20
2008-12-18[ARM] JIVE: fix spi gpio implementationBen Dooks1-2/+4
Fix the name of the driver, as well as the fact we are not passing the number of chipselects to the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] S3C: Update time initialisation to fix S3C64XX time problemsBen Dooks1-0/+1
The S3C64XX timer is running at the wrong rate due to the assumptions made in the timer initialisation about the way the pwm dividers work. This means that time on the S3C64XX runs twice as fast as it should. Fix the problem by moving to using the clk framework to setup the pwm timer clock muxes, as the pwm-clock code has all the necessary knowledge of how the timer clock inputs are routed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C: Make i2c device definition common to plat-s3cBen Dooks3-6/+11
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C64XX: Add initial clock frameworkBen Dooks1-6/+0
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Update clock data on resumeBen Dooks1-3/+18
Update the clock settings on resume for suspend/resume support so that if the boot loader changes anything or the system's PLL is reset then we return with the correct settings. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Split pll code out of regs-clock.hBen Dooks1-1/+2
Move the PLL calculation code into it's own header file for re-use with the other plat-s3c24xx based systems such as the S3C24A0. Note, we change the name of s3c2410_get_pll to the more generically named s3c24xx_get_pll as well as the related defintions. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.