aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5p64x0 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-10-16ARM: SAMSUNG: Initialize PWM backlight enable_gpio fieldThierry Reding2-0/+2
The GPIO API defines 0 as being a valid GPIO number, so this field needs to be initialized explicitly. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-12ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h headerTomasz Figa1-3/+0
This patch removes remaining inclusions of plat/regs-timer.h as a preparation to remove the header. As a part of this, things like save and restore of PWM registers are removed from SoC-specific code, because it is handled in appropriate drivers now. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12ARM: SAMSUNG: Remove pwm-clock infrastructureTomasz Figa2-4/+0
Since all the used PWM prescalers and dividers configuration has been moved to appropriate drivers, the pwm-clock infrastructure is now unused and so this patch removes it. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-12ARM: SAMSUNG: Modify board files to use new PWM platform deviceTomasz Figa2-4/+6
This patch modifies any board files using the legacy PWM device to use the new device instead. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Remove unused PWM timer IRQ chip codeTomasz Figa1-2/+0
As the need for an IRQ chip handling PWM timer interrupt chaining is gone now, this patch removes all the code made unnecessary. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Move all platforms to new clocksource driverTomasz Figa2-2/+17
This patch moves all Samsung platforms using PWM clocksource from legacy samsung-time to new samsung-pwm-timer driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Set PWM platform dataTomasz Figa1-0/+10
This patch adds PWM platform data needed for legacy (non-DT) platforms to handle SoC-specific bits of the PWM/timer block. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-08-06ARM: SAMSUNG: Unify base address definitions of timer blockTomasz Figa1-0/+1
This patch makes all defintions of timer block base address use the same prefix to allow using the common name to define platform device resource. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-07-09reboot: arm: change reboot_mode to use enum reboot_modeRobin Holt2-3/+6
Preparing to move the parsing of reboot= to generic kernel code forces the change in reboot_mode handling to use the enum. [akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c] Signed-off-by: Robin Holt <holt@sgi.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-20ARM: s5p64x0: avoid build warning for uncompress.hArnd Bergmann1-2/+2
Commit 5336539 "ARM: S5P64X0: Use common uncompress.h part for plat-samsung" was missing a type cast, this brings it in line with the other samsung platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-19ARM: SAMSUNG: Let platforms use the new watchdog reset driverTomasz Figa1-1/+3
This patch moves all platforms using the legacy watchdog reset helper function to the new watchdog reset driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-19ARM: S5P64X0: Use common uncompress.h part for plat-samsungTomasz Figa1-156/+6
Since uart_base can be set dynamically in arch_detect_cpu(), there is no need to have a copy of all code locally, just to override UART base address. This patch removes any duplicate code in uncompress.h variant of s5p64x0 and implements proper arch_detect_cpu() function to initialize UART with SoC-specific parameters. While at it, replace hard-coded register address with macro. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-19Merge branch 'samsung/exynos-multiplatform' into next/driversArnd Bergmann1-1/+1
Merging this into the next/drivers branch avoids a number of pointless conflicts with code changed here. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19ARM: exynos: move debug-macro.S to include/debug/Arnd Bergmann1-1/+1
The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05ARM: SAMSUNG: Rename s5p-time to samsung-timeRomain Naour3-8/+8
Signed-off-by: Naour Romain <romain.naour@openwide.fr> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-02-21Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds12-585/+13
Pull ARM SoC cleanups from Arnd Bergmann: "A large number of cleanups, all over the platforms. This is dominated largely by the Samsung platforms (s3c, s5p, exynos) and a few of the others moving code out of arch/arm into more appropriate subsystems. The clocksource and irqchip drivers are now abstracted to the point where platforms that are already cleaned up do not need to even specify the driver they use, it can all get configured from the device tree as we do for normal device drivers. The clocksource changes basically touch every single platform in the process. We further clean up the use of platform specific header files here, with the goal of turning more of the platforms over to being "multiplatform" enabled, which implies that they cannot expose their headers to architecture independent code any more. It is expected that no functional changes are part of the cleanup. The overall reduction in total code lines is mostly the result of removing broken and obsolete code." * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) ARM: mvebu: correct gated clock documentation ARM: kirkwood: add missing include for nsa310 ARM: exynos: move exynos4210-combiner to drivers/irqchip mfd: db8500-prcmu: update resource passing drivers/db8500-cpufreq: delete dangling include ARM: at91: remove NEOCORE 926 board sunxi: Cleanup the reset code and add meaningful registers defines ARM: S3C24XX: header mach/regs-mem.h local ARM: S3C24XX: header mach/regs-power.h local ARM: S3C24XX: header mach/regs-s3c2412-mem.h local ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/ ARM: S3C24XX: transform s3c2443 subirqs into new structure ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs ARM: S3C24XX: move s3c2443 irq code to irq.c ARM: S3C24XX: transform s3c2416 irqs into new structure ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs ARM: S3C24XX: move s3c2416 irq init to common irq code ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property ARM: S3C24XX: Move irq syscore-ops to irq-pm clocksource: always define CLOCKSOURCE_OF_DECLARE ...
2013-02-05Merge tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/cleanupOlof Johansson1-28/+0
From Shawn Guo: The series cleans up ARCH_HAS_DECOMP_WDOG and arch_decomp_wdog which are unused on ARM architecure. Samsung has some code setting up wdog in arch_decomp_wdog(). But since CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, it will not run. Otherwise, system can not boot at all when wdog is set up but no one pats it. * tag 'cleanup-decompwdog-3.9' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: samsung: remove unused arch_decomp_wdog() code ARM: remove unused arch_decomp_wdog() ARM: decompress: remove unused ARCH_HAS_DECOMP_WDOG Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-04Merge branch 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanupOlof Johansson9-521/+11
From Kukjin Kim: AS I commented, this makes <mach/*.h> local so that they could be removed. * 'next/cleanup-header' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (26 commits) ARM: S3C64XX: Fix missing header error with CONFIG_CPU_IDLE enabled ARM: S3C64XX: make regs-syscon-power.h local ARM: S3C64XX: make regs-sys.h local ARM: S3C64XX: make regs-srom.h local ARM: S3C64XX: make regs-modem.h local ARM: S3C64XX: make regs-gpio-memport.h local ARM: S3C64XX: make crag6410.h local ARM: S3C24XX: remove dsc.c and make regs-dsc.h local ARM: S3C24XX: remove idle.h ARM: S3C2412: cleanup regs-s3c2412.h ARM: S3C2416: remove regs-s3c2416-mem.h and regs-s3c2416.h ARM: S3C24XX: make vr1000-cpld.h, vr1000-irq.h and vr1000-map.h local ARM: S3C24XX: make otom-map.h local ARM: S3C24XX: make osiris-cpld.h and osiris-map.h local ARM: S3C24XX: make h1940.h and h1940-latch.h local ARM: S3C24XX: make gta02.h local ARM: S3C24XX: make bast-cpld.h, bast-irq.h and bast-map.h local ARM: S3C24XX: make anubis-cpld, anubis-irq and anubis-map local ARM: SAMSUNG: cleanup mach/gpio-fns.h gpio-track.h and gpio-nrs.h ARM: SAMSUNG: cleanup mach/regs-audss.h file ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-30ARM: SAMSUNG: Gracefully exit on suspend failureAbhilash Kesavan1-2/+2
As per the Exynos5250 User Manual: When there are pending interrupt events, WFI/WFE instruction are ignored. To cancel the power-down sequence follow these steps: 1) Disable system power-down using CENTRAL_SEQ_CONFIGURATION register 2) Clear WAKEUP_STAT register 3) Enable interrupt service routine for CPU Code for early wakeup for exynos already exists. Remove the panic on suspend failure, clear the wakeup state register and return 1 from cpu_suspend to indicate a failed suspend (to a user daemon). Older Samsung SoCs have similar panics and I have removed them all. Haven't touched the S3C2410 sleep code. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-14Merge tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux into next/cleanupOlof Johansson4-34/+0
From Rob Herring: Initial irqchip init infrastructure and GIC and VIC clean-ups This creates irqchip initialization infrastructure from Thomas Petazzoni. The VIC and GIC irqchip code is moved to drivers/irqchips and adapted to use the new infrastructure. All DT enabled platforms using GIC and VIC are converted over to use the new irqchip_init. * tag 'gic-vic-to-irqchip' of git://sources.calxeda.com/kernel/linux: irqchip: Move ARM vic.h to include/linux/irqchip/arm-vic.h ARM: picoxcell: use common irqchip_init function ARM: spear: use common irqchip_init function irqchip: Move ARM VIC to drivers/irqchip ARM: samsung: remove unused tick.h ARM: remove unneeded vic.h includes ARM: remove mach .handle_irq for VIC users ARM: VIC: set handle_arch_irq in VIC initialization ARM: VIC: shrink down vic.h irqchip: Move ARM gic.h to include/linux/irqchip/arm-gic.h ARM: use common irqchip_init for GIC init irqchip: Move ARM GIC to drivers/irqchip ARM: remove mach .handle_irq for GIC users ARM: GIC: set handle_arch_irq in GIC initialization ARM: GIC: remove direct use of gic_raise_softirq ARM: GIC: remove assembly ifdefs from gic.h ARM: mach-ux500: use SGI0 to wake up the other core arm: add set_handle_irq() to register the parent IRQ controller handler function irqchip: add basic infrastructure irqchip: add to the directories part of the IRQ subsystem in MAINTAINERS Fixed up massive merge conflicts with the timer cleanup due to adjacent changes: Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-bcm/board_bcm.c arch/arm/mach-cns3xxx/cns3420vb.c arch/arm/mach-ep93xx/adssphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/simone.c arch/arm/mach-ep93xx/snappercl15.c arch/arm/mach-ep93xx/ts72xx.c arch/arm/mach-ep93xx/vision_ep9307.c arch/arm/mach-highbank/highbank.c arch/arm/mach-imx/mach-imx6q.c arch/arm/mach-msm/board-dt-8960.c arch/arm/mach-netx/nxdb500.c arch/arm/mach-netx/nxdkn.c arch/arm/mach-netx/nxeb500hmi.c arch/arm/mach-nomadik/board-nhk8815.c arch/arm/mach-picoxcell/common.c arch/arm/mach-realview/realview_eb.c arch/arm/mach-realview/realview_pb1176.c arch/arm/mach-realview/realview_pb11mp.c arch/arm/mach-realview/realview_pba8.c arch/arm/mach-realview/realview_pbx.c arch/arm/mach-socfpga/socfpga.c arch/arm/mach-spear13xx/spear1310.c arch/arm/mach-spear13xx/spear1340.c arch/arm/mach-spear13xx/spear13xx.c arch/arm/mach-spear3xx/spear300.c arch/arm/mach-spear3xx/spear310.c arch/arm/mach-spear3xx/spear320.c arch/arm/mach-spear3xx/spear3xx.c arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-u300/core.c arch/arm/mach-ux500/board-mop500.c arch/arm/mach-ux500/cpu-db8500.c arch/arm/mach-versatile/versatile_ab.c arch/arm/mach-versatile/versatile_dt.c arch/arm/mach-versatile/versatile_pb.c arch/arm/mach-vexpress/v2m.c include/asm-generic/vmlinux.lds.h
2013-01-12ARM: samsung: remove unused tick.hRob Herring1-29/+0
Remove tick.h on s5p64x0 and s5pv210 as they are unused. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org
2013-01-12ARM: remove unneeded vic.h includesRob Herring3-3/+0
Numerous includes of asm/hardware/vic.h aren't needed, so remove them. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-samsung-soc@vger.kernel.org Cc: patches@opensource.wolfsonmicro.com Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-12ARM: remove mach .handle_irq for VIC usersRob Herring2-2/+0
Now that the VIC initialization sets up the handle_arch_irq pointer, we can remove it for all machines and make it static. Move vic_handle_irq to avoid a forward declaration. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Hubert Feurstein <hubert.feurstein@contec.at> Cc: Alessandro Rubini <rubini@unipv.it> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-01-11ARM: samsung: remove unused arch_decomp_wdog() codeShawn Guo1-28/+0
Besides the fact that CONFIG_S3C_BOOT_WATCHDOG is defined nowhere, with ARCH_HAS_DECOMP_WDOG removed from arch/arm/boot/compressed/decompress.c, all the arch_decomp_wdog() related code is not used. Remove them. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10ARM: S5P64X0: move s5p64x0-clock.h into local directoryKukjin Kim3-7/+6
The <mach/s5p64x0-clock.h> can be moved into mach-s5p64x0/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10ARM: S5P64X0: move i2c.h into local directoryKukjin Kim5-6/+5
The <mach/i2c.h> can be moved into mach-s5p64x0/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-10ARM: S5P64X0: remove gpiolib.c file in mach-s5p64x0Kukjin Kim1-508/+0
Since S5P64X0 gpiolib is supported in drivers/gpio/gpio-samsung.c, this can be removed. Probably, removing this file is missed when S5P64X0 gpiolib was supported in drivers/gpio/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-24ARM: delete struct sys_timerStephen Warren2-2/+2
Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-19ARM: S5P64X0: Add I2S clkdev supportPadmavathi Venna3-47/+75
I2S controller has an internal mux for RCLK source clk. The list of source clk names were passed through platform data in non-dt case. Register the existing RCLK source clocks with clkdev using generic connection id. This is required as part of adding DT support for I2S controller driver. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-13Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds2-2/+0
Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-10Merge remote-tracking branch 'asoc/topic/samsung' into asoc-nextMark Brown2-2/+0
2012-12-07ASoC: Samsung: Do not register samsung audio dma device as pdevPadmavathi Venna2-2/+0
Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a platform_device. This didn't represent the hardware well, since there was no separate hardware associated with this platform_device; it was a virtual device with sole purpose to call snd_soc_register_platform(). This change removes the platform_device completely. Each Samsung DAI now registers the ASoC 'platform' itself. Machine drivers are adjusted for the new 'platform' name. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13ARM: samsung: remove obsoleted init_consistent_dma_size()Marek Szyprowski1-2/+0
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-17ARM: SAMSUNG: Add naming of s3c64xx-spi devicesHeiko Stuebner1-0/+3
Commit a5238e360b71 (spi: s3c64xx: move controller information into driver data) introduced separate device names for the different subtypes of the spi controller but forgot to set these in the relevant machines. To fix this introduce a s3c64xx_spi_setname function and populate all Samsung arches with the correct names. The function resides in a new header, as the s3c64xx-spi.h contains driver platform data and should therefore at some later point move out of the Samsung include dir. Tested on a s3c2416-based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Stable <stable@vger.kernel.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [s.nawrocki@samsung.com: tested on mach-exynos] Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-10-13ARM: config: sort select statements alphanumericallyRussell King1-14/+14
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-12Merge tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6Linus Torvalds2-2/+2
Pull fbdev updates from Florian Tobias Schandinat: "This includes: - large updates for OMAP - basic OMAP5 DSS support for DPI and DSI outputs - large cleanups and restructuring - some update to Exynos and da8xx-fb - removal of the pnx4008 driver (arch removed) - various other small patches" Fix up some trivial conflicts (mostly just include line changes, but also some due to the renaming of the deferred work functions by Tejun). * tag 'fbdev-updates-for-3.7' of git://github.com/schandinat/linux-2.6: (193 commits) gbefb: fix compile error video: mark nuc900fb_map_video_memory as __devinit video/mx3fb: set .owner to prevent module unloading while being used video: exynos_dp: use clk_prepare_enable and clk_disable_unprepare drivers/video/exynos/exynos_mipi_dsi.c: fix error return code drivers/video/savage/savagefb_driver.c: fix error return code video: s3c-fb: use clk_prepare_enable and clk_disable_unprepare da8xx-fb: save and restore LCDC context across suspend/resume cycle da8xx-fb: add pm_runtime support video/udlfb: fix line counting in fb_write OMAPDSS: add missing include for string.h OMAPDSS: DISPC: Configure color conversion coefficients for writeback OMAPDSS: DISPC: Add manager like functions for writeback OMAPDSS: DISPC: Configure writeback FIFOs OMAPDSS: DISPC: Configure writeback specific parameters in dispc_wb_setup() OMAPDSS: DISPC: Configure overlay-like parameters in dispc_wb_setup OMAPDSS: DISPC: Add function to set channel in for writeback OMAPDSS: DISPC: Don't set chroma resampling bit for writeback OMAPDSS: DISPC: Downscale chroma if plane is writeback OMAPDSS: DISPC: Configure input and output sizes for writeback ...
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann5-7/+7
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-08-08include/video: move fimd register headers from platform to include/videoLeela Krishna Amudala2-2/+2
This patch moves the contents from regs-fb-v4.h and regs-fb.h to include/video/samsung_fimd.h. Also updates the header inclusion in machine files and driver files accordingly. Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-23Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds3-31/+14
Pull arm-soc device tree description updates from Arnd Bergmann: "This branch contains two kinds of updates: Some platforms in the process of getting converted to device tree based booting, and the platform specific patches necessary for that are included here. Other platforms are already converted, so we just need to update the actual device tree source files and the binding documents to add support for new board and new drivers. In the future we will probably separate those into two branches, and in the long run, the plan is to move the device tree source files out of the kernel repository, but that has to wait until we have completed a much larger portion of the binding documents." Fix up trivial conflicts in arch/arm/mach-imx/clk-imx6q.c due to newly added clkdev registers next to a few removed unnecessary ones. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: LPC32xx: Add PWM to base dts file ARM: EXYNOS: mark the DMA channel binding for SPI as preliminary ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS5 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOS5 ARM: EXYNOS: Add spi clock support for EXYNOS5 ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms ARM: EXYNOS: Enable platform support for SPI controllers for EXYNOX4 ARM: EXYNOS: Fix the incorrect hierarchy of spi controller bus clock ARM: ux500: Remove PMU platform registration when booting with DT ARM: ux500: Remove temporary snowball_of_platform_devs enablement structure ARM: ux500: Ensure vendor specific properties have the vendor's identifier pinctrl: pinctrl-nomadik: Append sleepmode property with vendor specific prefixes ARM: ux500: Move rtc-pl031 registration to Device Tree when enabled ARM: ux500: Enable the AB8500 RTC for all DT:ed DB8500 based devices ARM: ux500: Correctly reference IRQs supplied by the AB8500 from Device Tree ARM: ux500: Apply ab8500-debug node do the db8500 DT structure ARM: ux500: Add a ab8500-usb Device Tree node for db8500 based devices ARM: ux500: Add db8500 Device Tree node for misc/ab8500-pwm ARM: ux500: Add db8500 Device Tree node for ab8500-sysctrl ARM: ux500: Enable LED heartbeat functionality on Snowbal via DT ...
2012-07-13ARM: SAMSUNG: Remove pdev pointer parameter from spi gpio setup functionsThomas Abraham1-3/+2
The platform data pointer that is passed to the spi gpio setup functions is not used. Hence, this parameter is removed from all the spi gpio setup functions. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13spi: s3c64xx: move controller information into driver dataThomas Abraham3-28/+12
Platform data is used to specify controller hardware specific information such as the tx/rx fifo level mask and bit offset of rx fifo level. Such information is not suitable to be supplied from device tree. Instead, it can be moved into the driver data and removed from platform data. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jaswinder Singh <jaswinder.singh@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-20ARM: SAMSUNG: remove unused SPI clock headersPaul Bolle1-20/+0
Commit 875a59374cd10200ac24f03877ccd8f73af590cc ("ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung") deleted all (four) files that included one of the "spi-clocks.h" headers. It seems it was just an oversight to not remove those headers too. They can safely be removed now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-20ARM: S5P64X0: Remove unused variable in dma.c fileSachin Kamat1-2/+0
Fixes the following warning: arch/arm/mach-s5p64x0/dma.c:39:12: warning: 'dma_dmamask' defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-06-01Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds2-20/+28
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
2012-05-12ARM: S5P64X0: Use common macro to define resources on dev-audio.cTushar Behera1-60/+12
Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-04-09ARM: Samsung: Rework platform data of s3c-fb driverThomas Abraham2-20/+28
For all the Samsung SoC based boards which have the platform data for s3c-fb driver, the 'default_win' element in the platform data is removed and the lcd panel video timing values are moved out of individual window configuration data. Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: JeongHyeon Kim <jhkim@insignal.co.kr> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-03-29Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-25/+0
Pull "ARM: cleanups of io includes" from Olof Johansson: "Rob Herring has done a sweeping change cleaning up all of the mach/io.h includes, moving some of the oft-repeated macros to a common location and removing a bunch of boiler plate. This is another step closer to a common zImage for multiple platforms." Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes around it, tegra localtimer.o is *still* gone, yadda-yadda). * tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: tegra: Include assembler.h in sleep.S to fix build break ARM: pxa: use common IOMEM definition ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol ARM: __io abuse cleanup ARM: create a common IOMEM definition ARM: iop13xx: fix missing declaration of iop13xx_init_early ARM: fix ioremap/iounmap for !CONFIG_MMU ARM: kill off __mem_pci ARM: remove bunch of now unused mach/io.h files ARM: make mach/io.h include optional ARM: clps711x: remove unneeded include of mach/io.h ARM: dove: add explicit include of dove.h to addr-map.c ARM: at91: add explicit include of hardware.h to uncompressor ARM: ep93xx: clean-up mach/io.h ARM: tegra: clean-up mach/io.h ARM: orion5x: clean-up mach/io.h ARM: davinci: remove unneeded mach/io.h include [media] davinci: remove includes of mach/io.h ARM: OMAP: Remove remaining includes for mach/io.h ARM: msm: clean-up mach/io.h ...
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_systemLinus Torvalds1-0/+1
Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Disintegrate asm/system.h for ARMDavid Howells1-0/+1
Disintegrate asm/system.h for ARM. Signed-off-by: David Howells <dhowells@redhat.com> cc: Russell King <linux@arm.linux.org.uk> cc: linux-arm-kernel@lists.infradead.org
2012-03-07Merge branch 'next/cleanup-use-static' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanupOlof Johansson3-18/+12
* 'next/cleanup-use-static' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: use static declaration when it is not used in other files ARM: S5PV210: use static declaration when it is not used in other files ARM: S5PC100: use static declaration when it is not used in other files ARM: S5P64X0: use static declaration when it is not used in other files ARM: S3C64XX: use static declaration when it is not used in other files ARM: S3C24XX: use static declaration when it is not used in other files ARM: EXYNOS: use static declaration when it is not used in other files
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.