aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/board-kzm9g-reference.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-10-27ARM: shmobile: Remove FSF address from copyright headersLaurent Pinchart1-4/+0
The information is already included in the COPYING file in the kernel sources root directory, we don't want to modify all source files when the FSF will move to a new address, and I'm tired of seeing the related checkpatch.pl warnings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-22ARM: shmobile: kzm9g: Use shmobile_init_delay()Magnus Damm1-1/+1
Adjust the KZM9G board support code to use shmobile_init_delay() together with CPU Frequency settings from the DTS. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-20ARM: shmobile: kzm9g-reference: Remove unneeded nr_irqs initializationGeert Uytterhoeven1-1/+0
As per arch_probe_nr_irqs(), the default value is NR_IRQS, which maps to NR_IRQS_LEGACY if CONFIG_SPARSE_IRQ=y. Since SPARSE_IRQ is selected by both ARCH_MULTIPLATFORM and ARCH_SHMOBILE_LEGACY, it's always enabled on shmobile. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-20ARM: shmobile: kzm9g: Add shmobile_init_late()Magnus Damm1-0/+1
Extend board specific KZM9D DT reference machine vector to include shmobile_init_late() so Suspend-to-RAM and CPUIdle are setup as expected. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-25ARM: shmobile: Move sh73a0.hGeert Uytterhoeven1-1/+3
Change location of sh73a0.h so it can be included as "sh73a0.h" instead of the old style <mach/sh73a0.h> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-17ARM: shmobile: Move common.hMagnus Damm1-1/+1
Change location for common.h so it can be used as #include "common.h" instead of the old style #include <mach/common.h>. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-30ARM: l2c: shmobile: remove cache size overrideRussell King1-1/+1
The cache size should already be present in the L2 cache auxiliary control register: it is part of the integration process to configure the hardware IP. Most platforms get this right, yet still many cargo-cult program, and assume that they always need specifying to the L2 cache code. Remove them so we can find out which really need this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30ARM: l2c: remove platforms/SoCs setting early BRESPRussell King1-2/+2
Since we now automatically enable early BRESP in core L2C-310 code when we detect a Cortex-A9, we don't need platforms/SoCs to set this bit explicitly. Instead, they should seek to preserve the value of bit 30 in the auxiliary control register. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-09Merge tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+0
Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman: "Lots of cleanup and refactoring and some SMP additions for Renesas platforms. Due to some inter-dependencies with other arm-soc branches, this Renesas stuff was separated out for sending after the other branches were merged. Highlights: - remove unused board support and cleanup of unused headers - refactoring of init and device registration - simplify IRQ initialization" * tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs ARM: shmobile: Introduce per-CPU SMP boot / sleep code ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779 ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0 ARM: shmobile: Add shared SCU CPU Hotplug code ARM: shmobile: Use shared SCU SMP boot code on emev2 ARM: shmobile: Use shared SCU SMP boot code on r8a7779 ARM: shmobile: Use shared SCU SMP boot code on sh73a0 ARM: shmobile: Introduce shared SCU SMP boot code ARM: shmobile: sh73a0: Remove global GPIO_NR definition ARM: shmobile: kzm9d: remove nfsroot settings from bootargs ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup ARM: shmobile: bockw: add missing __initdata ARM: shmobile: r8a7790: add missing __initdata ARM: shmobile: r8a7779: add missing __initdata ARM: shmobile: Remove unused shmobile_init_time() ARM: shmobile: Use clocksource_of_init() on r8a7790 ARM: shmobile: Use default ->init_time() on KZM9G DT ref ...
2013-08-14Merge tag 'renesas-pinmux-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dtOlof Johansson1-47/+0
From Simon Horman: Renesas ARM based SoC pinmux updates for v3.12 SH Mobile pinctrl DT support * tag 'renesas-pinmux-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT ARM: shmobile: armadillo-reference: Add st1232 pin mappings ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree ARM: shmobile: sh73a0: Add pin control device to device tree ARM: shmobile: sh7372: Add pin control device to device tree ARM: shmobile: r8a7790: Add GPIO controller devices to device tree ARM: shmobile: r8a7790: Add pin control device to device tree ARM: shmobile: r8a7779: Add GPIO controller devices to device tree ARM: shmobile: r8a7779: Add pin control device to device tree ARM: shmobile: r8a7778: Add GPIO controller devices to device tree ARM: shmobile: r8a7778: Add pin control device to device tree ARM: shmobile: r8a7740: Add pin control device to device tree ARM: shmobile: r8a73a4: Add pin control device to device tree Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/r8a73a4.dtsi arch/arm/boot/dts/r8a7790.dtsi
2013-08-06ARM: shmobile: Use default ->init_time() on KZM9G DT refMagnus Damm1-1/+0
Leave ->init_time() set to NULL to use the default ARM behaviour. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: kzm9g-reference: Move SDHI regulators to DTLaurent Pinchart1-6/+0
Create two GPIO-controlled fixed-voltage regulators in the kzm9g-reference DT and remove manual configuration of the corresponding GPIOs from board code. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device treeLaurent Pinchart1-40/+0
Replace the pinctrl mappings in board code by device tree mappings. For devices that are still instantiated from board code reference the mappings as the default pin controller state to apply them at boot time. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-22ARM: shmobile: sh73a0: Add pin control device to device treeLaurent Pinchart1-14/+13
Add a pfc node to the sh73a0 device tree and remove manual pinmux initialization from the corresponding board files. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-17ARM: shmobile: kzm9g: Remove init_irq declaration in machine descriptionMagnus Damm1-2/+0
Remove redundant irqchip_init() callback. The default case of NULL will result in invoking irqchip_init() anyway. Signed-off-by: Magnus Damm <damm@opensource.se> [ horms+renesas@verge.net.au: Trimmed patch to remove portion that updates the sh73a0 SoC and altered the subject to use the same format as the patch that updates the sh73a0. ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-05ARM: shmobile: kzm9g-reference: Remove the VCCQ MC0 function GPIOLaurent Pinchart1-1/+0
The VCCQ MC0 power gate is now controlled by a regulator registered by the PFC driver. Remove the corresponding function GPIO. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-21ARM: shmobile: kzm9g-reference: fix device-tree bindings and device namesGuennadi Liakhovetski1-14/+13
Fix several device-tree bindings, that haven't been updated for newest versions of respective drivers, and device names and pin numbers, left over from non-DT and old pinctrl versions. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: kzm9g: Trim reference DT_MACHINE_STARTSimon Horman1-9/+0
Remove .init_late and .restart from DT_MACHINE_START for kzm9g reference as these are not necessary to bring the board up which is the main aim of kzm9g reference. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: kzm9g: Remove warning about SMPSimon Horman1-7/+0
Remove warning about SMP not working with the clock initialisation used for kzm9g reference. This is resolved by not selecting CONFIG_PREEMPT. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: SDHI and MMCIF interfaces to kzm9g-referenceGuennadi Liakhovetski1-0/+36
Add SDHI0 and SDHI2 interfaces to kzm9g-reference. With no pinctrl DT support we cannot use GPIO card-detection and regulator switching. Also update the MMCIF DT node to use all 8 data lines and avoid redundant information in DT. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> [ horms+renesas@verge.net.au: Updated for pinmux changes by Laurent Pinchart ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: parse DT and configure pinmux early on kzm9g-referenceGuennadi Liakhovetski1-0/+1
GPIOs can be provided by the pinctrl subsystem, which can be initialised by DT. Therefore DT has to be parsed before requesting GPIOs. Also non-DT pinmux has to be configured early. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18ARM: shmobile: kzm9g: Reference DT implementationSimon Horman1-0/+87
Provide alternate board code for the kzm9g to demonstrate how DT may be used given the current state of driver device tree support. This is intended to act as a reference for mach-shmobile developers. Some notes: * Brings up the GIC interrupt handler using device tree * Brings up the following device using device tree: - MMCIF (MMC) * Does not bring up the INTC interrupt controller at all, thus external devices may not be used. In particular, the SMSC ethernet device may not be used and thus NFS root may not be used. * Uses existing C code and not device tree to initialise the following, which are needed for a working board: - SCIF (Serial) - CMT (Clock) - PFC (GPIO) To use this alternate board code instead of the normal board code, CONFIG_MACH_KZM9G_REFERENCE should be selected in the kernel config. And the sh73a0-kzm9g-reference.dtb flattened device tree blob should be used. Includes fix by Thierry Reding to no longer use gic_handle_irq() Includes fixes by Guennadi Liakhovetski for recent pinmux changes. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.