aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-04ARM: shmobile: bockw: Sort Kconfig node's selectionsSimon Horman1-2/+2
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHYSimon Horman1-0/+2
The armadillo800eva board uses has an SH ethernet controller which uses an SMSC phy. Select SMSC_PHY for koelsch if SH_ETH is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: ape6evm: Conditionally select SMSC_PHYSimon Horman1-0/+2
The ape6evm board uses has an SMSC911X ethernet controller which uses an SMSC phy. Select SMSC_PHY for ape6evm if SMSC911X is enabled to make use of the SMSC-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Add SATA0 supportValentine Barshak1-0/+17
This adds SATA0 support to Koelsch board. SATA1 is not available since its pinmux configuration is fixed to PCIe. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Add SATA supportValentine Barshak1-0/+17
This adds SATA support to Lager board. Only SATA1 port is available. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Magnus Damm <damm@opensource.se> [horms+renesas@verge.net.au: resolved trivial conflicts] [horms+renesas@verge.net.au: capitalised "ARM" in subject] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Make spi_flash_data constGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: kzm9d: Use common clock frameworkTakashi Yoshii1-3/+2
Use common clock framework version of clock drivers/clk/shmobile/clk-emev2.c instead of sh-clkfwk version arch/arm/mach-shmobile/clock-emev2.c when it is configured as a part of multi-platform. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: lager: Add VIN1 SoC camera supportValentine Barshak1-0/+76
This adds VIN1 SoC camera along with ADV7180 subdevice support to Lager. VIN0 camera is not registered because it has ADV7612 I2C subdevice which is not supported yet. Changes in V2: * made lager_add_vin_device function static. Changes in V3: * capitalized ARM in the subject. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: mach-shmobile: kzm9g: add zboot supportUlrich Hecht3-0/+456
Adds support to run the kernel on the uninitialized KZM9G board, using for instance the mask ROM boot loader or JTAG. This patch tries to emulate the style of the corresponding "mackerel" implementation. The DRAM controller setup code has been adapted from u-boot. Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: koelsch: Conditionally select MICREL_PHY for MultiplatformSimon Horman1-0/+1
The koelsch board uses has an SH ethernet controller which uses a Micrel phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the Micrel-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: bockw: add USB Func DMAEngine supportKuninori Morimoto1-0/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: bockw: use HPBIF DMAEngine for soundKuninori Morimoto1-7/+15
R-Car sound driver is supporting Mem <-> SRU <-> SSI transfer via DMAEngine. The sound will be less noise if it uses SRU path since it has FIFO. This patch supports it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: bockw: use SSI DMAEngine for soundKuninori Morimoto1-6/+6
R-Car sound driver is supporting Mem <-> SSI direct transfer via DMAEngine. Current HPB-DMA is using double plane transfer, but the sound may have noise since SSI doesn't have FIFO. This patch supports it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-04ARM: shmobile: Lager: conditionally select CONFIG_MICREL_PHYSergei Shtylyov1-0/+2
Now that support for KSZ8041RNLI is added to the Micrel PHY driver and we intend to support PHY IRQs on the Lager board, we have to enable the Micrel driver. Do this by selecting CONFIG_MICREL_PHY for Lager if CONFIG_SH_ETH is enabled. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-02-02ARM: fix HAVE_ARM_TWD selection for OMAP and shmobileRob Herring1-1/+1
The selection of HAVE_ARM_TWD for OMAP and shmobile depend on LOCAL_TIMER which no longer exists. They should depend on SMP instead. Cc: Tony Lindgren <tony@atomide.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-23Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds13-67/+591
Pull ARM SoC board updates from Olof Johansson: "This branch is reducing in size for every release since most board-related changes have started happening in devicetrees now. Still, we have some things going on here. * Renesas platforms are still adding a bit more legacy device support, something that should trail off shortly as they move to full DT * We group most defconfig updates into this branch out of old habits * Removal of legacy OMAP2 platforms over to DT continues, and a handful of old code is being removed here" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: dts: OMAP2: fix interrupt number for rng ARM: dts: Split omap3 pinmux core device ARM: dts: Add omap specific pinctrl defines to use padconf addresses ARM: bcm2835: bcm2835_defconfig updates ARM: msm_defconfig: Enable restart driver defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974 ARM: msm: Add support for APQ8074 Dragonboard ARM: exynos_defconfig: Enable S2MPS11 voltage regulator ARM: tegra: Enable DRM panel support ARM: shmobile: mackerel: Fix USBHS pinconf entry ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB ARM: shmobile: Let Lager multiplatform boot with Lager DTB ARM: shmobile: Remove non-multiplatform Koelsch reference support ARM: shmobile: Remove non-multiplatform Lager reference support ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization ARM: shmobile: lager-reference: Enable multiplaform kernel support ARM: shmobile: armadillo: Set backlight enable GPIO ARM: shmobile: Koelsch: add Ether support ... Conflicts: arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
2014-01-23Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds8-41/+27
Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-23Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds26-1048/+758
Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-23Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds13-95/+59
Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-06ARM: shmobile: r8a7790: Fix I2C controller namesValentine Barshak2-5/+5
This fixes the issue introduced by the following commit: b448c904f5058b6c "ARM: shmobile: r8a7790: add I2C support" The R8A7790 is an R-Car Gen2 SoC. The clock division factor (CDF) width is 3 bits on Gen2 as opposed to 2 bits on Gen1. Fix the device names for R8A7790 SoC to make the R-Car I2C driver configure the hardware properly. Changes in V2: * rebased on top of the latest branch; * capitalized ARM in the subject line; * noted the commit that caused the issue in the log. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-01-03Merge tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dtOlof Johansson10-8/+151
From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boardsOlof Johansson17-42/+340
From Simon Horman: Second Round of Renesas ARM based SoC Board updates for v3.14 * r8a7791 (R-Car M2) based Koelsch board - Let Koelsch multiplatform boot with Koelsch DTB - Remove non-multiplatform DT reference support - Instantiate clkdevs for SCIF and CMT - Remove duplicate CCF initialization - Add Ether and DU support * r8a7790 (R-Car H2) based Lager board - Let Lager multiplatform boot with Lager DTB - Remove non-multiplatform DT reference support - Instantiate clkdevs for SCIF and CMT - Enable multiplaform kernel support * r8a7740 (R-Mobile A1) based Armadillo board - Set backlight enable GPIO * sh7374 (SH-Mobile AP4) based Mackerel board - Correct USBHS pinconf entry * tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: mackerel: Fix USBHS pinconf entry ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB ARM: shmobile: Let Lager multiplatform boot with Lager DTB ARM: shmobile: Remove non-multiplatform Koelsch reference support ARM: shmobile: Remove non-multiplatform Lager reference support ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization ARM: shmobile: lager-reference: Enable multiplaform kernel support ARM: shmobile: armadillo: Set backlight enable GPIO ARM: shmobile: Koelsch: add Ether support ARM: shmobile: koelsch: Add DU device arm: shmobile: clks: remove duplicated clock from r7s72100 ARM: shmobile: koelsch: Conditionally select MICREL_PHY ARM: shmobile: rcar-gen2: Initialize CCF before clock sources ARM: shmobile: r8a7791: Add clock index macros for DT sources ARM: shmobile: r8a7790: Add clock index macros for DT sources ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code ARM: shmobile: r8a7778: add USB Func DMAEngine support ARM: rcar-gen2: Do not setup timer in non-secure mode ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boardsOlof Johansson36-412/+741
From Simon Horman: Renesas ARM based SoC board updates for v3.14 * Global - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile * r7s72100 SoC (RZ/A1H) based Genmai Board - Add Multiplatform support - Add Reference DT * r8a7791 (R-Car M2) based Koelsch board - Add pinctrl_register_mappings() for Koelsch - Hook up SW30-SW36 on Koelsch - Mark GPIO keys as wake-up sources - Use ->init_late() - Add Multiplatform support - Set .debounce_interval for GPIO keys - Add SW2 to GPIO keys - Add Led 6, 7 and 8 support - Add reference DT - Enable PFC/GPIO * r8a7790 (R-Car H2) based Lager board - Add gpio/fixed regulator for SDHI - Add SPI FLASH support on QSPI - Mark GPIO keys as wake-up sources - Use ->init_late() - Set .debounce_interval for GPIO keys * r8a7778 (R-Car M1) based Bock-W board - bockw: remove unused RSND_SSI_CLK_FROM_ADG - Set .debounce_interval for GPIO keys - Correct FPGA ioremap area - Use regulator for MMCIF * r8a7740 (R-Mobile A1) based Armadillo board - Correct FSI address size * sh7374 (SH-Mobile AP4) based Mackerel board - Use pinconf API to configure pin pull-down - clk_round_rate() can return a zero to indicate an error * tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits) ARM: shmobile: lager: add gpio/fixed regulator for SDHI ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG ARM: shmobile: armadillo: fixup FSI address size ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down ARM: shmobile: Lager:add SPI FLASH support on QSPI ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error ARM: shmobile: Add pinctrl_register_mappings() for Koelsch ARM: shmobile: Use ->init_late() on Lager ARM: shmobile: Hook up SW30-SW36 on Koelsch ARM: shmobile: koelsch: mark GPIO keys as wake-up sources ARM: shmobile: Use ->init_late() on Koelsch ARM: shmobile: lager: mark GPIO keys as wake-up sources ARM: shmobile: r7s72100 Genmai Multiplatform ARM: shmobile: r7s72100 Genmai DT reference C bits ARM: shmobile: r7s72100 Genmai DT reference DTS bits ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support ARM: shmobile: koelsch: set .debounce_interval ARM: shmobile: lager: set .debounce_interval ARM: shmobile: bockw: add pin pull-up setting for SDHI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26ARM: shmobile: mackerel: Fix coherent DMA maskLaurent Pinchart1-2/+2
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26ARM: shmobile: kzm9g: Fix coherent DMA maskLaurent Pinchart1-1/+1
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26ARM: shmobile: armadillo: Fix coherent DMA maskLaurent Pinchart1-2/+2
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24arm: shmobile: r7s72100: add i2c clocksWolfram Sang1-1/+7
Tested with RIIC2 on a genmai board. Others untested but hopefully trivial enough to be added. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-5/+4
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-6/+5
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-6/+14
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't define SCIF platform data in an arrayLaurent Pinchart1-63/+49
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't define SCIF platform data in an arrayLaurent Pinchart1-73/+52
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't define SCIF platform data in an arrayLaurent Pinchart1-17/+19
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't define SCIF platform data in an arrayLaurent Pinchart1-27/+22
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't define SCIF platform data in an arrayLaurent Pinchart1-32/+26
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.