aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-02-02ARM: fix HAVE_ARM_TWD selection for OMAP and shmobileRob Herring1-1/+1
The selection of HAVE_ARM_TWD for OMAP and shmobile depend on LOCAL_TIMER which no longer exists. They should depend on SMP instead. Cc: Tony Lindgren <tony@atomide.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-23Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds13-67/+591
Pull ARM SoC board updates from Olof Johansson: "This branch is reducing in size for every release since most board-related changes have started happening in devicetrees now. Still, we have some things going on here. * Renesas platforms are still adding a bit more legacy device support, something that should trail off shortly as they move to full DT * We group most defconfig updates into this branch out of old habits * Removal of legacy OMAP2 platforms over to DT continues, and a handful of old code is being removed here" * tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits) ARM: dts: OMAP2: fix interrupt number for rng ARM: dts: Split omap3 pinmux core device ARM: dts: Add omap specific pinctrl defines to use padconf addresses ARM: bcm2835: bcm2835_defconfig updates ARM: msm_defconfig: Enable restart driver defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974 ARM: msm: Add support for APQ8074 Dragonboard ARM: exynos_defconfig: Enable S2MPS11 voltage regulator ARM: tegra: Enable DRM panel support ARM: shmobile: mackerel: Fix USBHS pinconf entry ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB ARM: shmobile: Let Lager multiplatform boot with Lager DTB ARM: shmobile: Remove non-multiplatform Koelsch reference support ARM: shmobile: Remove non-multiplatform Lager reference support ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization ARM: shmobile: lager-reference: Enable multiplaform kernel support ARM: shmobile: armadillo: Set backlight enable GPIO ARM: shmobile: Koelsch: add Ether support ... Conflicts: arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
2014-01-23Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds8-41/+27
Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-23Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds26-1048/+758
Pull ARM SoC platform changes from Olof Johansson: "New core SoC-specific changes. New platforms: * Introduction of a vendor, Hisilicon, and one of their SoCs with some random numerical product name. * Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m, i.e. !MMU). * Marvell Berlin series of SoCs, which include the one in Chromecast. * MOXA platform support, ARM9-based platform used mostly in industrial products * Support for Freescale's i.MX50 SoC. Other work: * Renesas work for new platforms and drivers, and conversion over to more multiplatform-friendly device registration schemes. * SMP support for Allwinner sunxi platforms. * ... plus a bunch of other stuff across various platforms" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits) ARM: tegra: fix tegra_powergate_sequence_power_up() inline ARM: msm_defconfig: Update for multi-platform ARM: msm: Move MSM's DT based hardware to multi-platform support ARM: msm: Only build timer.c if required ARM: msm: Only build clock.c on proc_comm based platforms ARM: ux500: Enable system suspend with WFI support ARM: ux500: turn on PRINTK_TIME in u8500_defconfig ARM: shmobile: r8a7790: Fix I2C controller names ARM: msm: Simplify ARCH_MSM_DT config ARM: msm: Add support for MSM8974 SoC ARM: sunxi: select ARM_PSCI MAINTAINERS: Update Allwinner sunXi maintainer files ARM: sunxi: Select RESET_CONTROLLER ARM: imx: improve the comment of CCM lpm SW workaround ARM: imx: improve status check of clock gate ARM: imx: add necessary interface for pfd ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100 ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support ARM: imx: Add cpu frequency scaling support ARM i.MX35: Add devicetree support. ...
2014-01-23Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds13-95/+59
Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-06ARM: shmobile: r8a7790: Fix I2C controller namesValentine Barshak2-5/+5
This fixes the issue introduced by the following commit: b448c904f5058b6c "ARM: shmobile: r8a7790: add I2C support" The R8A7790 is an R-Car Gen2 SoC. The clock division factor (CDF) width is 3 bits on Gen2 as opposed to 2 bits on Gen1. Fix the device names for R8A7790 SoC to make the R-Car I2C driver configure the hardware properly. Changes in V2: * rebased on top of the latest branch; * capitalized ARM in the subject line; * noted the commit that caused the issue in the log. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-01-03Merge tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dtOlof Johansson10-8/+151
From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-02Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boardsOlof Johansson17-42/+340
From Simon Horman: Second Round of Renesas ARM based SoC Board updates for v3.14 * r8a7791 (R-Car M2) based Koelsch board - Let Koelsch multiplatform boot with Koelsch DTB - Remove non-multiplatform DT reference support - Instantiate clkdevs for SCIF and CMT - Remove duplicate CCF initialization - Add Ether and DU support * r8a7790 (R-Car H2) based Lager board - Let Lager multiplatform boot with Lager DTB - Remove non-multiplatform DT reference support - Instantiate clkdevs for SCIF and CMT - Enable multiplaform kernel support * r8a7740 (R-Mobile A1) based Armadillo board - Set backlight enable GPIO * sh7374 (SH-Mobile AP4) based Mackerel board - Correct USBHS pinconf entry * tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits) ARM: shmobile: mackerel: Fix USBHS pinconf entry ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB ARM: shmobile: Let Lager multiplatform boot with Lager DTB ARM: shmobile: Remove non-multiplatform Koelsch reference support ARM: shmobile: Remove non-multiplatform Lager reference support ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization ARM: shmobile: lager-reference: Enable multiplaform kernel support ARM: shmobile: armadillo: Set backlight enable GPIO ARM: shmobile: Koelsch: add Ether support ARM: shmobile: koelsch: Add DU device arm: shmobile: clks: remove duplicated clock from r7s72100 ARM: shmobile: koelsch: Conditionally select MICREL_PHY ARM: shmobile: rcar-gen2: Initialize CCF before clock sources ARM: shmobile: r8a7791: Add clock index macros for DT sources ARM: shmobile: r8a7790: Add clock index macros for DT sources ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code ARM: shmobile: r8a7778: add USB Func DMAEngine support ARM: rcar-gen2: Do not setup timer in non-secure mode ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-29Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boardsOlof Johansson36-412/+741
From Simon Horman: Renesas ARM based SoC board updates for v3.14 * Global - Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile * r7s72100 SoC (RZ/A1H) based Genmai Board - Add Multiplatform support - Add Reference DT * r8a7791 (R-Car M2) based Koelsch board - Add pinctrl_register_mappings() for Koelsch - Hook up SW30-SW36 on Koelsch - Mark GPIO keys as wake-up sources - Use ->init_late() - Add Multiplatform support - Set .debounce_interval for GPIO keys - Add SW2 to GPIO keys - Add Led 6, 7 and 8 support - Add reference DT - Enable PFC/GPIO * r8a7790 (R-Car H2) based Lager board - Add gpio/fixed regulator for SDHI - Add SPI FLASH support on QSPI - Mark GPIO keys as wake-up sources - Use ->init_late() - Set .debounce_interval for GPIO keys * r8a7778 (R-Car M1) based Bock-W board - bockw: remove unused RSND_SSI_CLK_FROM_ADG - Set .debounce_interval for GPIO keys - Correct FPGA ioremap area - Use regulator for MMCIF * r8a7740 (R-Mobile A1) based Armadillo board - Correct FSI address size * sh7374 (SH-Mobile AP4) based Mackerel board - Use pinconf API to configure pin pull-down - clk_round_rate() can return a zero to indicate an error * tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits) ARM: shmobile: lager: add gpio/fixed regulator for SDHI ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG ARM: shmobile: armadillo: fixup FSI address size ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down ARM: shmobile: Lager:add SPI FLASH support on QSPI ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error ARM: shmobile: Add pinctrl_register_mappings() for Koelsch ARM: shmobile: Use ->init_late() on Lager ARM: shmobile: Hook up SW30-SW36 on Koelsch ARM: shmobile: koelsch: mark GPIO keys as wake-up sources ARM: shmobile: Use ->init_late() on Koelsch ARM: shmobile: lager: mark GPIO keys as wake-up sources ARM: shmobile: r7s72100 Genmai Multiplatform ARM: shmobile: r7s72100 Genmai DT reference C bits ARM: shmobile: r7s72100 Genmai DT reference DTS bits ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support ARM: shmobile: koelsch: set .debounce_interval ARM: shmobile: lager: set .debounce_interval ARM: shmobile: bockw: add pin pull-up setting for SDHI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26ARM: shmobile: mackerel: Fix coherent DMA maskLaurent Pinchart1-2/+2
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26ARM: shmobile: kzm9g: Fix coherent DMA maskLaurent Pinchart1-1/+1
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26ARM: shmobile: armadillo: Fix coherent DMA maskLaurent Pinchart1-2/+2
Commit 4dcfa60071b3d23f0181f27d8519f12e37cefbb9 ("ARM: DMA-API: better handing of DMA masks for coherent allocations") added an additional check to the coherent DMA mask that results in an error when the mask is larger than what dma_addr_t can address. Set the LCDC coherent DMA mask to DMA_BIT_MASK(32) instead of ~0 to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24arm: shmobile: r7s72100: add i2c clocksWolfram Sang1-1/+7
Tested with RIIC2 on a genmai board. Others untested but hopefully trivial enough to be added. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-5/+4
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-6/+5
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Don't set plat_sci_port scbrr_algo_id fieldLaurent Pinchart1-1/+0
The field will be removed from the sh-sci driver. Don't set it and let the driver handle baud rate calculation internally. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-5/+10
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-6/+14
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resourcesLaurent Pinchart1-2/+7
Passing the register base address and IRQ through platform data is deprecated. Use resources instead. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Don't define SCIF platform data in an arrayLaurent Pinchart1-63/+49
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Don't define SCIF platform data in an arrayLaurent Pinchart1-73/+52
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: Don't define SCIF platform data in an arrayLaurent Pinchart1-17/+19
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r7s72100: Don't define SCIF platform data in an arrayLaurent Pinchart1-27/+22
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a73a4: Don't define SCIF platform data in an arrayLaurent Pinchart1-32/+26
The SCIF driver is transitioning to platform resources. Board code will thus need to define an array of resources for each SCIF device. This is incompatible with the macro-based SCIF platform data definition as an array. Rework the macro to define platform data as individual structures. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7779: Use macros to declare SCIF devicesLaurent Pinchart1-100/+24
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7740: Use macros to declare SCIF devicesLaurent Pinchart1-162/+29
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh73a0: Use macros to declare SCIF devicesLaurent Pinchart1-160/+27
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: sh7372: Use macros to declare SCIF devicesLaurent Pinchart1-131/+25
Replace copy-n-paste SCIF platform data and device declaration with a macro. This reduces the amount of code and improves readability. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7778: add sound SCU clock supportKuninori Morimoto1-0/+20
This is needed to use SRC (= Sampling Rate Converter) Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-20Merge tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dtKevin Hilman22-304/+284
From Simon Horman: Renesas ARM based SoC DT updates for v3.14 * Global - Use interrupt macros - Use #include in device tree sources - Tidyup DT node naming * emev2 (Emma Mobile EV2) SoC - Setup internal peripheral interrupts as level high - Use interrupt macros in DT files - Add clock tree description in DT * r8a7791 (R-Car M2) SoC - Correct GPIO resources * r8a7791 (R-Car M2) based Koelsch board - Configure PFC and GPO - Use r8a7791 suffix for IRQC compat string - Add DT reference * r8a7790 (R-Car H2) based Lager board - Include all 4 GiB of memory - Use r8a7790 suffix for IRQC and MMCIF compat strings - Enable MMCIF - Add default PFC settings * r8a7778 (R-Car M1) SoC - Suffix for INTC compat string - Add HSPI, MMCIF, SDHI and I2C suppport on DTSI - Correct pin control device addresses * r8a7778 (R-Car M1) based Bock-W board - Use falling edge IRQ for LAN9221 in DT reference - Enable I2C, HSPI0, MMCIF and SDHI - Correct MMC pin conflict - Remove manual PFC settings from DT reference - Add default PFC settings * r8a7779 (R-Car H1) SoC - Add HSPI and SDHI support - Suffix for INTC compat string * r8a7779 (R-Car H1) based Marzen board - Enable HSPI0 and SDHI in DTS - Remove SDHI0 WP pin setting - Use falling edge IRQ for LAN9221 in DT reference - Add SDHI support * r8a7740 (R-Mobile A1) SoC - Suffix for INTC compat string - Add FSI support via DTSI - Use interrupt macros * r8a7740 based Armadillo board - Add FSI support for DTS - Use low level IRQ for ST1231 in DT reference * r8a73a4 (SH-Mobile APE6) SoC - Use interrupt macros in DT files * r8a73a4 (R-Mobile APE6) based ape6evm board - Include all 2 GiB of memory * r8a73a0 (SH-Mobile AG5) SoC - Correct SDHI compat string * r8a73a0 (SH-Mobile AG5) based kzm9d board - Add GPIO keys and Add PCF8575 GPIO extender to DT - Enable DSW2 with gpio-keys - Use falling edge IRQ for LAN9221 in DT reference * tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits) ARM: shmobile: marzen: enable HSPI0 in DTS ARM: shmobile: r8a7779: add HSPI support to DTSI ARM: shmobile: Use r8a7779 suffix for INTC compat string ARM: shmobile: Use r8a7778 suffix for INTC compat string ARM: shmobile: Use r8a7740 suffix for INTC compat string ARM: shmobile: Use sh73a0 suffix for INTC compat string ARM: shmobile: armadillo: add FSI support for DTS ARM: shmobile: r8a7740: add FSI support via DTSI ARM: shmobile: emev2: Setup internal peripheral interrupts as level high ARM: shmobile: emev2: Use interrupt macros in DT files ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files ARM: shmobile: Fix r8a7791 GPIO resources in DTS ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref ARM: shmobile: Include all 4 GiB of memory on Lager ARM: shmobile: Include all 2 GiB of memory on APE6EVM ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref ARM: shmobile: kzm9g-reference: Add GPIO keys to DT ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT ARM: shmobile: Koelsch DT reference GPIO LED support ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-19Merge branch 'heads/soc2' into dt3-baseSimon Horman10-8/+151
2013-12-19ARM: shmobile: mackerel: Fix USBHS pinconf entryLaurent Pinchart1-1/+1
Fix a typo in the USBHS1 pinconf entry that prevented the pull-down from being enabled. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTBLaurent Pinchart1-0/+1
Let the multiplatform Koelsch support boot with the legacy DTS for Koelsch as well as the Koelsch reference DTS. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Let Lager multiplatform boot with Lager DTBLaurent Pinchart1-0/+1
Let the multiplatform Lager support boot with the legacy DTS for Lager as well as the Lager reference DTS. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Remove non-multiplatform Koelsch reference supportLaurent Pinchart3-13/+0
Now that r8a7791 has CCF support remove the legacy Koelsch reference Kconfig bits CONFIG_MACH_KOELSCH_REFERENCE for the non-multiplatform case. Starting from this commit Koelsch board support is always enabled via CONFIG_MACH_KOELSCH, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-koelsch.c and board-koelsch-reference.c The file board-koelsch-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> [horms+renesas@verge.net.au: Dropped arch/arm/boot/dts/Makefile portion] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Remove non-multiplatform Lager reference supportLaurent Pinchart3-13/+0
Now that r8a7790 has CCF support remove the legacy Lager reference Kconfig bits CONFIG_MACH_LAGER_REFERENCE for the non-multiplatform case. Starting from this commit Lager board support is always enabled via CONFIG_MACH_LAGER, and CONFIG_ARCH_MULTIPLATFORM is used to select between board-lager.c and board-lager-reference.c The file board-lager-reference.c can no longer be used together with the legacy sh-clk clock framework, instead CCF is used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMTLaurent Pinchart1-1/+29
Now that the common clock framework is supported, the clock lookup entries in clock-r8a7791.c are not registered anymore. Devices must instead reference their clocks in the device tree. However, SCIF and CMT devices are still instantiated through platform code, and thus need a clock lookup entry. Retrieve the SCIF and CMT clock entries by name and register clkdevs for the corresponding devices. This will be removed when the SCIF and CMT devices will be instantiated from the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMTLaurent Pinchart1-1/+30
Now that the common clock framework is supported, the clock lookup entries in clock-r8a7790.c are not registered anymore. Devices must instead reference their clocks in the device tree. However, SCIF and CMT devices are still instantiated through platform code, and thus need a clock lookup entry. Retrieve the SCIF and CMT clock entries by name and register clkdevs for the corresponding devices. This will be removed when the SCIF and CMT devices will be instantiated from the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.