aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3cRussell King1-0/+1
arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-07USB: otg: sharable otg transceiver opsTony Lindgren1-38/+0
Move otg_get/set/put_transceiver() from omap specific code to common otg.c so other upcoming drivers can share them. [ dbrownell@users.sourceforge.net: move to drivers/usb/otg, dox ] Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: otg: add otg_put_transceiver()Philipp Zabel1-0/+6
As Russell King points out, calling put_device(otg_transceiver->dev) directly in driver cleanup paths makes assumptions about otg_transceiver internals. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06arm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-1/+1
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17Merge branch 'hsmmc-init' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into develRussell King5-221/+123
2008-12-15Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into develRussell King13-185/+219
2008-12-10omap mmc: Add low-level initialization for hsmmc controllerTony Lindgren2-8/+25
Add low-level initialization for hsmmc controller. Merged into this patch patch are various improvments and board support by Grazvydas Ignotas and David Brownell. Also change wire4 to be wires, as some newer controllers support 8 data lines. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10omap mmc: Add better MMC low-level initTony Lindgren4-221/+106
This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Pin multiplexing updates for 24xx and 34xxArun KS1-0/+41
This patch adds some new pin multiplexing options for McBSP and McSPI from Arun KS. Also add two more GPIOs from David Brownell. Also mark omap24xx_cfg_reg() static. Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: DMA: Fix for sDMA Errata 1.113Santosh Shilimkar1-1/+14
SDMA channel is not disabled after transaction error. So explicitly disable it. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked By : Nishant kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao1-1/+4
Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2008-12-10ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helperJarkko Nikula1-19/+36
- Simplify function omap_i2c_mux_pins - Add OMAP34xx pin multiplexing for busses 1 - 3 Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: skip unnecessary TLDR write during non-autoreload for gptimerPaul Walmsley1-3/+4
The GPTIMER TLDR register does not need to be written if the GPTIMER is not in autoreload mode. This is the usual case for dynamic tick-enabled kernels. Simulation data indicate that skipping the read that occurs as part of the write should save at least 300-320 ns for each GPTIMER1 timer reprogram. (This assumes L4-Wakeup is at 19MHz and GPTIMER write posting is enabled.) Skipping the write itself probably won't have much impact since it should be posted on the OCP interconnect. Tested on 2430SDP and 3430SDP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: drop redundant pending write check for gptimerPaul Walmsley1-4/+0
omap_dm_timer_write_reg() already waits for pending writes to complete, so the extra wait in omap_dm_timer_set_load() is superfluous. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Use omap_rev() instead of system_revLauri Leukkunen3-7/+10
system_rev is meant for board revision, this patch changes all relevant instances to use the new omap_rev() function liberating system_rev to be used with ATAG_REVISION as it has been designed. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Fix cpu detectionTony Lindgren1-51/+25
At some point omap2 changed the bits for GET_OMAP_CLASS, which broke 15xx detection on 730 as noticed by Russell King. This patch fixes omap2 cpu detection to respect the original GET_OMAP_CLASS, and simplifies the detection for 34xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Switch to gpio_request/free callsJarkko Nikula1-1/+1
Switch to gpio_request/free calls Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: minor gpio bugfixesDavid Brownell1-5/+15
Minor GPIO fixes: - If get_gpio_bank() fails, then BUG() out. - In omap_set_gpio_debounce(): * protect the read/modify/write with the relevant spinlock * make the omap3 clock ops pass "sparse" checking Except for the spinlock problem, these were reported through "make". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: make legacy gpio request/free calls superfluousJarkko Nikula2-34/+21
Clean up OMAP GPIO request/free functions - Rename and declare static OMAP specific GPIO request/free functions - Register them into gpiolib as chip-specific hooks - Add omap_request_gpio/omap_free_gpio wrappers for existing code not converted yet to use gpiolib Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> [ dbrownell@users.sourceforge.net: remove needless check_gpio() calls ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: use gpio_to_irqDavid Brownell1-2/+2
Have most uses of OMAP_GPIO_IRQ() use gpio_to_irq() instead. Calls used for table initialization are left alone, at least this time around. (This patch is for code in both the OMAP tree and mainline.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_outputDavid Brownell2-15/+0
More conversion to the standard GPIO interfaces: stop using omap_set_gpio_direction() entirely, and switch over to the gpio_direction_output() call. Note that because gpio_direction_output() includes the initial value, this change isn't quite transparent. - For the call sites which defined an initial value either before or after setting the direction, that value was used. When that value was previously assigned afterwards, this could eliminate a brief output glitch ... and possibly change behavior. In a few cases (LCDs) several values were assigned together ... those were re-arranged to match the explicit sequence provided. - Some call sites didn't define such a value; so I chose an initial "off/reset" value that seemed to default to "off". In short, files touched by this patch might notice some small changes in startup behavior (with trivial fixes). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_inputDavid Brownell1-1/+1
More switchover to the cross-platform GPIO interface: use gpio_direction_input(), not an OMAP-specific call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to standard gpio get/set callsDavid Brownell3-25/+8
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: gpios implement new to_irq()David Brownell2-4/+21
Make OMAP use the new __gpio_to_irq() hook, to make it easier to support IRQs coming in from off-chip gpio controllers like the TWL4030/TPS65930 chip used on OMAP3 boads like Beagleboard.org and the Gumstix Overo. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Extend gpio label column width in omap_gpio debugfs fileJarkko Nikula1-1/+1
There are already various drivers having bigger label than 10 bytes. Most of them fit well under 20 bytes but make column width exact so that oversized labels don't mess up output alignment. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3Jouni Hogander1-11/+15
This patch changes gpio "driver" to enable debounce clock for gpio-bank only when debounce is enabled for some gpio in that bank. Gpio functional clocks are also renamed in clock tree, gpioX_fck -> gpioX_dbck. This patch triggers problem with gpio wake-up and Omap3. Gpios in PER domain aren't capable to generate wake-up if PER domain is in sleep state. For this iopad wake-up should be used and needed pad configuration should be done. Enabling iopad wake-up for gpio pads is left for bootloader or omap mux configuration in kernel. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-01[ARM] omap: fix a pile of issuesRussell King2-6/+6
This patch fixes a number of sillies, from missing 'const' to using 'return' in void functions, to functions with no arguments not even 'void' and a cast which isn't required. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-30[ARM] Add a common typesafe __io implementationRussell King1-4/+2
As Al did for Versatile in 2ad4f86b60b649fd7428265c08d73a3bd360c81b, add a typesafe __io implementation for platforms to use. Convert platforms to use this new simple typesafe implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King1-1/+1
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28Merge branch 'highmem' into develRussell King3-17/+7
Conflicts: arch/arm/mach-clps7500/include/mach/memory.h
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre1-14/+3
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King1-0/+2
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-26ARM: OMAP: Fixes for suspend / resume GPIO wake-up handlingTero Kristo1-2/+3
Use the correct wake-up enable register, and make it work with 34xx also. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-25ARM: OMAP: Typo fix for clock_allow_idleAmit Kucheria1-1/+1
The second clk_deny_idle instance should be clk_allow_idle instead. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix define for twl4030 irqsTony Lindgren1-1/+1
Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bitsTony Lindgren1-1/+3
On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix debugfs_create_*'s error checking method for arm/plat-omapZhaolei1-10/+10
debugfs_create_*() returns NULL if an error occurs, returns -ENODEV when debugfs is not enabled in the kernel. Comparing to PATCH v1, because clk_debugfs_init is included in "#if defined CONFIG_DEBUG_FS", we only need to check NULL return. Thanks Li Zefan <lizf@cn.fujitsu.com> debugfs_create_u8() and other function's return value's checking method are also fixed in this patch. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-20Merge git://git.infradead.org/mtd-2.6Linus Torvalds1-1/+5
* git://git.infradead.org/mtd-2.6: (69 commits) Revert "[MTD] m25p80.c code cleanup" [MTD] [NAND] GPIO driver depends on ARM... for now. [MTD] [NAND] sh_flctl: fix compile error [MTD] [NOR] AT49BV6416 has swapped erase regions [MTD] [NAND] GPIO NAND flash driver [MTD] cmdlineparts documentation change - explain where mtd-id comes from [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash [MTD] mtdoops: Fix a bug where block may not be erased [MTD] mtdoops: Add a magic number to logged kernel oops [MTD] mtdoops: Fix an off by one error [JFFS2] Correct parameter names of jffs2_compress() in comments [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written [MTD] [MAPS] Remove unused variable after ROM API cleanup. [MTD] m25p80.c extended jedec support (v2) [MTD] remove unused mtd parameter in of_mtd_parse_partitions() [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE [MTD] [NAND] driver extension to support NAND on TQM85xx modules ...
2008-10-15Merge branch 'fixes' into for-linusRussell King2-9/+14
Conflicts: arch/arm/mach-versatile/core.c
2008-10-14Merge branch 's3c-move' into develRussell King1-13/+0
Conflicts: arch/arm/mach-versatile/core.c
2008-10-14Merge branch 'omap-all' into develRussell King43-378/+1277
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-14[ARM] 5302/1: ARM: OMAP: Revert omap3 WDT changes to avoid merge conflictTony Lindgren1-10/+1
With the upcoming WDT patches OMAP_WDT_BASE is no longer needed in devices.c. Revert some earlier omap3 changes to avoid merge conflicts with the WDT patches. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14[ARM] 5305/1: ARM: OMAP: Fix compile of McBSP by removing unnecessary checkTony Lindgren1-7/+0
Recent McBSP patches changed to allocating devices dynamically and the check for OMAP_MAX_MCBSP_COUNT became unnecessary. The check for OMAP_MAX_MCBSP_COUNT should have been removed with the earlier McBSP patches in devices.c but was accidentally left out. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14[ARM] 5301/1: ARM: OMAP: Add missing irq definesTony Lindgren1-0/+18
Some McBSP irq defines were missing that should have been added with the earlier McBSP patches. Add the missing McBSP irqs, and a few other missing irqs as defined in linux-omap tree. Also add a blank line to separate irq defines from the irq line calculations. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds1-8/+13
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: add spinlocking [WATCHDOG] Orion: add hardware watchdog support [WATCHDOG] omap_wdt.c: cleanup a bit omap_wdt.c [WATCHDOG] omap_wdt.c: another ioremap() fix [WATCHDOG] omap_wdt.c: sync linux-omap changes [WATCHDOG] Add AT91SAM9X watchdog [WATCHDOG] Add driver for winbond w83697ug/uf watchdog feature [WATCHDOG] add watchdog driver IT8716 IT8726 IT8712J/K
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds16-21/+18
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-allRussell King19-55/+268
2008-10-10[WATCHDOG] omap_wdt.c: sync linux-omap changesFelipe Balbi1-8/+13
These are changes that have been sitting in linux-omap and were never sent upstream. Hopefully, it'll never happen again at least for this driver. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-10-10ALSA: Correct Vladimir Barinov's e-mail addressVladimir Barinov1-1/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ARM: OMAP3: Add basic board support for OMAP LDPNishant Kamat2-0/+40
This adds minimal board support for the OMAP3430 LDP development platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.