| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull clk updates from Stephen Boyd:
"This time around we have four lines of diff in the core framework,
removing a function that isn't used anymore. Otherwise the main new
thing for the common clk framework is that it is selectable in the
Kconfig language now. Hopefully this will let clk drivers and clk
consumers be testable on more than the architectures that support the
clk framework. The goal is to introduce some Kunit tests for the
framework.
Outside of the core framework we have the usual set of various driver
updates and non-critical fixes. The dirstat shows that the new
Baikal-T1 driver is the largest addition this time around in terms of
lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
drivers introduce many lines to support new or upcoming SoCs. After
that the dirstat shows the usual suspects working on their SoC support
by fixing minor bugs, correcting data and converting some of their DT
bindings to YAML.
Core:
- Allow the COMMON_CLK config to be selectable
New Drivers:
- Clk driver for Baikal-T1 SoCs
- Mediatek MT6765 clock support
- Support for Intel Agilex clks
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for the new Renesas RZ/G1H (R8A7742) SoC
- Add support for Qualcomm's MSM8939 Generic Clock Controller
Updates:
- Support IDT VersaClock 5P49V5925
- Bunch of updates for HSDK clock generation unit (CGU) driver
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
- Support custom flags in Xilinx zynq firmware
- Various small fixes to the Xilinx clk driver
- A single minor rounding fix for the legacy Allwinner clock support
- A few patches from Abel Vesa as preparation of adding audiomix
clock support on i.MX
- A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
clk-pllv3 drivers
- Drop dependency on ARM64 for i.MX8M clock driver, to support
aarch32 mode on aarch64 hardware
- A series from Peng Fan to improve i.MX8M clock drivers, using
composite clock for core and bus clk slice
- Set a better parent clock for flexcan on i.MX6UL to support CiA102
defined bit rates
- A couple changes for EMC frequency scaling on Tegra210
- Support for CPU frequency scaling on Tegra20/Tegra30
- New clk gate for CSI test pattern generator on Tegra210
- Regression fixes for Samsung exynos542x and exynos5433 SoCs
- Use of fallthrough; attribute for Samsung s3c24xx
- Updates and fixup HDMI and video clocks on Meson8b
- Fixup reset polarity on Meson8b
- Fix GPU glitch free mux switch on Meson gx and g12
- A minor fix for the currently unused suspend/resume handling on
Renesas RZ/A1 and RZ/A2
- Two more conversions of Renesas DT bindings to json-schema
- Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
clk: mediatek: Remove ifr{0,1}_cfg_regs structures
clk: baikal-t1: remove redundant assignment to variable 'divider'
clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
dt-bindings: clock: Add a missing include to MMP Audio Clock binding
dt: Add bindings for IDT VersaClock 5P49V5925
clk: vc5: Add support for IDT VersaClock 5P49V6965
clk: Add Baikal-T1 CCU Dividers driver
clk: Add Baikal-T1 CCU PLLs driver
dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
clk: mediatek: assign the initial value to clk_init_data of mtk_mux
clk: mediatek: Add MT6765 clock support
clk: mediatek: add mt6765 clock IDs
dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
CLK: HSDK: CGU: add support for 148.5MHz clock
CLK: HSDK: CGU: support PLL bypassing
CLK: HSDK: CGU: check if PLL is bypassed first
clk: clk-si5341: Add support for the Si5345 series
...
|
|
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
|
|
I got a build failure with CONFIG_ARCH_SPRD=m when the
main portion of the clock driver failed to get linked into
the kernel:
ERROR: modpost: "sprd_pll_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_comp_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_sc_gate_ops" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_clk_probe" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_clk_regmap_init" [drivers/clk/sprd/sc9863a-clk.ko] undefined!
ERROR: modpost: "sprd_pll_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
ERROR: modpost: "sprd_div_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
ERROR: modpost: "sprd_mux_ops" [drivers/clk/sprd/sc9860-clk.ko] undefined!
This is a combination of two trivial bugs:
- A platform should not be 'tristate', it should be a 'bool' symbol
like the other platforms, if only for consistency, and to avoid
surprises like this one.
- The clk Makefile does not traverse into the sprd subdirectory
if the platform is disabled but the drivers are enabled for
compile-testing.
Fixing either of the two would be sufficient to address the link failure,
but for correctness, both need to be changed.
Fixes: 2b1b799d7630 ("arm64: change ARCH_SPRD Kconfig to tristate")
Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Acked-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The arm64 architecture selects COMMON_CLK at the toplevel ARM64 config.
The COMMON_CLK config option already selects CLKDEV_LOOKUP so it's
redundant to have this selected again for the Tegra specific config.
Cc: Paul Walmsley <paul@pwsan.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20200409064416.83340-4-sboyd@kernel.org
|
|
CONFIG_COMMON_CLK_VERSATILE doesn't really do anything other than hiding
Arm Ltd reference platform clock drivers. It is both selected by the
platforms that need it and has a 'depends on' for those platforms. Let's
drop the selects and convert CONFIG_COMMON_CLK_VERSATILE into a
menuconfig entry. With this make CONFIG_ICST visible.
Move the 'select REGMAP_MMIO' to the drivers that require it (SP810 did
not).
This also has the side effect of enabling CONFIG_ICST for COMPILE_TEST
as it was not visible before.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The VExpress power-off/reset driver is not needed on 64-bit platforms as
PSCI power-off and reset can be used instead. Stop selecting it so it
can be disabled and not always built-in.
CONFIG_VEXPRESS_CONFIG can also be dropped as it was a dependency for
CONFIG_POWER_RESET_VEXPRESS.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The code changes are mostly for 32-bit platforms and include:
- Lots of updates for the Nvidia Tegra platform, including cpuidle,
pmc, and dt-binding changes
- Microchip at91 power management updates for the recently added
sam9x60 SoC
- Treewide setup_irq deprecation by afzal mohammed
- STMicroelectronics stm32 gains earlycon support
- Renesas platforms with Cortex-A9 can now use the global timer
- Some TI OMAP2+ platforms gain cpuidle support
- Various cleanups for the i.MX6 and Orion platforms, as well as
Kconfig files across all platforms"
* tag 'arm-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (75 commits)
ARM: qcom: Add support for IPQ40xx
ARM: mmp: replace setup_irq() by request_irq()
ARM: cns3xxx: replace setup_irq() by request_irq()
ARM: spear: replace setup_irq() by request_irq()
ARM: ep93xx: Replace setup_irq() by request_irq()
ARM: iop32x: replace setup_irq() by request_irq()
arm: mach-dove: Mark dove_io_desc as __maybe_unused
ARM: orion: replace setup_irq() by request_irq()
ARM: debug: stm32: add UART early console support for STM32MP1
ARM: debug: stm32: add UART early console support for STM32H7
ARM: debug: stm32: add UART early console configuration for STM32F7
ARM: debug: stm32: add UART early console configuration for STM32F4
cpuidle: tegra: Disable CC6 state if LP2 unavailable
cpuidle: tegra: Squash Tegra114 driver into the common driver
cpuidle: tegra: Squash Tegra30 driver into the common driver
cpuidle: Refactor and move out NVIDIA Tegra20 driver into drivers/cpuidle
ARM: tegra: cpuidle: Remove unnecessary memory barrier
ARM: tegra: cpuidle: Make abort_flag atomic
ARM: tegra: cpuidle: Handle case where secondary CPU hangs on entering LP2
ARM: tegra: Make outer_disable() open-coded
...
|
|
arm64: soc: ZynqMP SoC changes for v5.7
- Change firmware dependency to be able to disable it
* tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Make zynqmp_firmware driver optional
include: linux: firmware: Correct config dependency of zynqmp_eemi_ops
Link: https://lore.kernel.org/r/ecef6de5-8318-9f88-db8c-7c33fe44901f@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Unlike on arm32, the HAVE_ARM_ARCH_TIMER config symbol does not exist on
arm64.
Note that the toplevel ARM64 symbol always selects ARM_ARCH_TIMER, so
support for it is always included.
Fixes: 628d30d1ccb897fe ("arm64: Add platform selection for BCM2835.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Make zynqmp_firmware driver as optional to disable it, if user don't
want to use default zynqmp firmware interface.
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
The default value of Kconfig for almost all sprd drivers are the same with
ARCH_SPRD, making these drivers built as modules as default would be easier
if we can set ARCH_SPRD as 'm', so this patch change ARCH_SPRD to tristate.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20200305103228.9686-1-zhang.lyra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
i.MX SoC update for 5.5:
- Add arm64 Kconfig option for the NXP S32 platform.
- Drop imx_anatop_usb_chrg_detect_disable() function which becomes
unneeded, since all the necessary charger setup is done by the USB
PHY driver now.
- Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC
unique ID from OCOTP block.
- Replace i.MX machine specific coherency exit implementation using
the generic v7_exit_coherency_flush() function.
* tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: use generic function to exit coherency
ARM: imx: Add serial number support for i.MX6/7 SoCs
ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
arm64: Introduce config for S32
Link: https://lore.kernel.org/r/20191105150315.15477-2-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Realtek ARM64 based SoC for v5.5
Enable reset controllers and add a mailing list to MAINTAINERS.
* tag 'realtek-arm64-soc-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
arm64: realtek: Select reset controller
MAINTAINERS: Add mailing list for Realtek SoCs
Link: https://lore.kernel.org/r/20191030041000.31848-1-afaerber@suse.de
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add configuration option for the NXP S32 platform family in
Kconfig.platforms. For starters, the only SoC supported will be Treerunner
(S32V234), with a single execution target: the S32V234-EVB (rev 29288)
board.
Signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Select RESET_CONTROLLER for ARCH_REALTEK.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Add the BCM2711 to ARCH_BCM2835, but use new machine board code
because of the differences.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Florian Fanelli <f.fainelli@gmail.com>
|
|
Enable Exynos Chipid driver for accessing SoC related information.
Link: https://lore.kernel.org/r/20190904175002.10487-6-krzk@kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARCH_MXC platforms needs system counter as broadcast timer
to support cpuidle, enable it by default.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC platform changes. Main theme this merge window:
- The Netx platform (Netx 100/500) platform is removed by Linus
Walleij-- the SoC doesn't have active maintainers with hardware,
and in discussions with the vendor the agreement was that it's OK
to remove.
- Russell King has a series of patches that cleans up and refactors
SA1101 and RiscPC support"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
ARM: stm32: use "depends on" instead of "if" after prompt
ARM: sa1100: convert to common clock framework
ARM: exynos: Cleanup cppcheck shifting warning
ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
ARM: exynos: Only build MCPM support if used
arm: add missing include platform-data/atmel.h
ARM: davinci: Use GPIO lookup table for DA850 LEDs
ARM: OMAP2: drop explicit assembler architecture
ARM: use arch_extension directive instead of arch argument
ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
ARM: riscpc: enable chained scatterlist support
ARM: riscpc: reduce IRQ handling code
ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
ARM: riscpc: parse video information from tagged list
ARM: riscpc: add ecard quirk for Atomwide 3port serial card
MAINTAINERS: mvebu: Add git entry
soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
ARM: OMAP2+: Make some variables static
...
|
|
This pull request contains Broadcom ARM64-based SoCs Kconfig.platform
changes for 5.3, please pull the following:
- Jim adds the ability for ARCH_BRCMSTB to use reset controllers
- Doug adds the ability for ARCH_BRCMSTB to use the PINCTRL framework
- Florian enables the use of the BCM7038 Level 1 interrupt controller
for ARCH_BRCMSTB
* tag 'arm-soc/for-5.3/soc-arm64' of https://github.com/Broadcom/stblinux:
arm64: Enable PINCTRL for ARCH_BRCMSTB
arm64: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
arm64: Enable BCM7038_L1_IRQ for ARCH_BRCMSTB
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Texas Instruments AM65x fixes for v5.2
- Fix up a Kbuild warning when SOC_TI is not set
* tag 'am654-fixes-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: arch_k3: Fix kconfig dependency warning
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
i.MX fixes for 5.2:
- A build fix for soc-imx8 driver which needs SOC_BUS support. To
avoid dealing with the dependency for every single i.MX SoC bus
driver, we selects at from architecture level.
- A fix on i.MX SCU firmware driver to ensure SCU irq is enabled only
after IPC is ready.
- A regression fix on cpuidle-imx6sx driver, which causes some
characters loss on serial communication.
* tag 'imx-fixes-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX
firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready
arm64: imx: Fix build error without CONFIG_SOC_BUS
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Fix Kbuild warning when SOC_TI is not set
WARNING: unmet direct dependencies detected for TI_SCI_INTA_IRQCHIP
Depends on [n]: TI_SCI_PROTOCOL [=y] && SOC_TI [=n]
Selected by [y]:
- ARCH_K3 [=y]
Fixes: 009669e74813 ("arm64: arch_k3: Enable interrupt controller drivers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
|
|
ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips like
BCM7211 which adopted that pin controller for GPIO.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Allow the use of reset controllers on ARCH_BRCMSTB such as the recently
introduced RESET_BRCMSTB driver.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
ARCH_BRCMSTB makes use of the irq-bcm7038-l1.c irqchip driver, enable
it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During randconfig builds, I occasionally run into an invalid configuration
drivers/soc/imx/soc-imx8.o: In function `imx8_soc_init':
soc-imx8.c:(.init.text+0x144): undefined reference to `soc_device_register'
while CONFIG_SOC_BUS is not set, the building failed like this. This patch
selects SOC_BUS to fix it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: a7e26f356ca1 ("soc: imx: Add generic i.MX8 SoC driver")
Suggested-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
|
|
arm64: tegra: Core fixes for v5.2-rc1
This enables the ARM_GIC_PM driver by default for Tegra in order to
increase build coverage.
* tag 'tegra-for-5.2-arm64-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Select ARM_GIC_PM
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Enable ARM_GIC_PM for 64-bit Tegra devices. This is required to ensure
that the driver gets built into kernel and helps to register the AGIC
device when enabled in DT.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Select the TISCI Interrupt Router, Aggregator drivers and all its
dependencies for TI's SoCs based on K3 architecture.
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz
* tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA
arm64: dts: stratix10: increase QSPI max frequency to 100MHz
arm64: dts: stratix10: enable MMC highspeed support
ARM: dts: socfpga: enable MMC highspeed support
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add the initial device tree files for Intel's Agilex SoCFPGA platform.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
This pull request brings in a build fix for arm64 with bcm2835
enabled, and fixes the driver in the presence of -EPROBE_DEFER.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
When adding the MFD dependency for power domains and WDT in bcm2835, I
added it only on the arm32 side and missed it for arm64.
Fixes: 5e6acc3e678e ("bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.")
Signed-off-by: Eric Anholt <eric@anholt.net>
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
|
|
Pull arm64 updates from Catalin Marinas:
- Pseudo NMI support for arm64 using GICv3 interrupt priorities
- uaccess macros clean-up (unsafe user accessors also merged but
reverted, waiting for objtool support on arm64)
- ptrace regsets for Pointer Authentication (ARMv8.3) key management
- inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
the riscv maintainers)
- arm64/perf updates: PMU bindings converted to json-schema, unused
variable and misleading comment removed
- arm64/debug fixes to ensure checking of the triggering exception
level and to avoid the propagation of the UNKNOWN FAR value into the
si_code for debug signals
- Workaround for Fujitsu A64FX erratum 010001
- lib/raid6 ARM NEON optimisations
- NR_CPUS now defaults to 256 on arm64
- Minor clean-ups (documentation/comments, Kconfig warning, unused
asm-offsets, clang warnings)
- MAINTAINERS update for list information to the ARM64 ACPI entry
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
arm64: mmu: drop paging_init comments
arm64: debug: Ensure debug handlers check triggering exception level
arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
Revert "arm64: uaccess: Implement unsafe accessors"
arm64: avoid clang warning about self-assignment
arm64: Kconfig.platforms: fix warning unmet direct dependencies
lib/raid6: arm: optimize away a mask operation in NEON recovery routine
lib/raid6: use vdupq_n_u8 to avoid endianness warnings
arm64: io: Hook up __io_par() for inX() ordering
riscv: io: Update __io_[p]ar() macros to take an argument
asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
arm64: Add workaround for Fujitsu A64FX erratum 010001
arm64: Rename get_thread_info()
arm64: Remove documentation about TIF_USEDFPU
arm64: irqflags: Fix clang build warnings
arm64: Enable the support of pseudo-NMIs
arm64: Skip irqflags tracing for NMI in IRQs disabled context
arm64: Skip preemption when exiting an NMI
arm64: Handle serror in NMI context
irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
...
|
|
Pull ARM new SoC family support from Arnd Bergmann:
"Two new SoC families are added this time.
Sugaya Taichi submitted support for the Milbeaut SoC family from
Socionext and explains:
"SC2000 is a SoC of the Milbeaut series. equipped with a DSP
optimized for computer vision. It also features advanced
functionalities such as 360-degree, real-time spherical stitching
with multi cameras, image stabilization for without mechanical
gimbals, and rolling shutter correction. More detail is below:
https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
Interestingly, this one has a history dating back to older chips made
by Socionext and previously Matsushita/Panasonic based on their own
mn10300 CPU architecture that was removed from the kernel last year.
Manivannan Sadhasivam adds support for another SoC family, this is the
Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
The chip is intended for Deep Learning applications, and comes with
dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
microcontroller core to control the tensor unit. For the moment, the
TPU is not accessible in mainline Linux, so we treat it as a generic
Arm SoC.
More information is available at
https://www.sophon.ai/"
* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
ARM: configs: Add Milbeaut M10V defconfig
ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
dt-bindings: timer: Add Milbeaut M10V timer description
ARM: milbeaut: Add basic support for Milbeaut m10v SoC
dt-bindings: Add documentation for Milbeaut SoCs
dt-bindings: arm: Add SMP enable-method for Milbeaut
dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
MAINTAINERS: Add entry for Bitmain SoC platform
arm64: dts: bitmain: Add Sophon Egde board support
arm64: dts: bitmain: Add BM1880 SoC support
arm64: Add ARCH_BITMAIN platform
dt-bindings: arm: Document Bitmain BM1880 SoC
|
|
When ARCH_MXC get enabled, ARM64_ERRATUM_845719 will be selected and
this warning will happen when COMPAT isn't set.
WARNING: unmet direct dependencies detected for ARM64_ERRATUM_845719
Depends on [n]: COMPAT [=n]
Selected by [y]:
- ARCH_MXC [=y]
Rework to add 'if COMPAT' before ARM64_ERRATUM_845719 gets selected,
since ARM64_ERRATUM_845719 depends on COMPAT.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Amlogic SoC Kconfig updates for v5.1:
- arm64: meson: enable g12a clock controller
- drop unneeded COMMON_CLK_AMLOGIC
* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: meson: enable g12a clock controller
ARM: meson: remove COMMON_CLK_AMLOGIC selection
arm64: meson: remove COMMON_CLK_AMLOGIC selection
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add ARCH_BITMAIN for supporting Bitmain SoC platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable the g12a clock controller for ARCH_MESON
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Selecting COMMON_CLK_AMLOGIC is not required as it is already selected
by the SoC clock controller driver
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The ATF on the i.MX8MQ device disables all non-essential power
domains. For correct on-SoC peripheral operation we need both
the power domain driver and generic domains, so device driver
probe gets ordered behind the power domain controller driver.
Select those options, as those being absent can lead to very
hard to debug failures.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The system is unable to boot without this driver being present,
as most of the peripherals are connected to this IRQ controller.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Pull more ARM SoC updates from Olof Johansson:
"A few updates that we merged late but are low risk for regressions for
other platforms (and a few other straggling patches):
- I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in
here. They're for a driver for the PL353 SRAM controller and a
build fix for the qualcomm scm driver.
- A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated
Vivante GPU, 256MB RAM, Wifi). This includes some acked
platform-specific drivers (serial, etc). This also include DTs for
two boards with this SoC, OrangePi 2G and OrangePi i86.
- i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K
video playback offload). This is the first i.MX 64-bit SoC.
- Some minor updates to Samsung boards (adding a few peripherals in
DTs).
- Small rework for SMP bootup on STi platforms.
- A couple of TEE driver fixes.
- A couple of new config options (bcm2835 thermal, Uniphier MDMAC)
enabled in defconfigs"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC
arm64: defconfig: Re-enable bcm2835-thermal driver
MAINTAINERS: Add entry for RDA Micro SoC architecture
tty: serial: Add RDA8810PL UART driver
ARM: dts: rda8810pl: Add interrupt support for UART
dt-bindings: serial: Document RDA Micro UART
ARM: dts: rda8810pl: Add timer support
ARM: dts: Add devicetree for OrangePi i96 board
ARM: dts: Add devicetree for OrangePi 2G IoT board
ARM: dts: Add devicetree for RDA8810PL SoC
ARM: Prepare RDA8810PL SoC
dt-bindings: arm: Document RDA8810PL and reference boards
dt-bindings: Add RDA Micro vendor prefix
ARM: sti: remove pen_release and boot_lock
arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards
arm64: dts: imx8mq-evk: enable watchdog
arm64: dts: imx8mq: add watchdog devices
MAINTAINERS: add i.MX8 DT path to i.MX architecture
arm64: add support for i.MX8M EVK board
arm64: add basic DTS for i.MX8MQ
...
|
|
Add basic Kconfig symbols to make the MXC architecture available
in the ARM64 world.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
arch/arm64/Kconfig.platforms has SoC-specific Kconfig symbols for
Renesas SoCs, while other vendors have only a single Kconfig symbol.
Increase consistency with other vendors by moving the SoC-specific
Kconfig symbols to drivers/soc/renesas/Kconfig.
Increase consistency with R-Car Gen1 and Gen2 SoCs on arm32 by
introducing a family-specific Kconfig symbol for R-Car Gen3
(ARCH_RCAR_GEN3), which enables family-specific hardware features.
While so far only a single family (R-Car Gen3 and derivatives) of
Renesas arm64 SoCs is supported by Linux, this will make it easier
to add support for other SoC families later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The R-Car GPIO driver cannot be enabled when Renesas SoC's ARCH configs
(ARCH_RENESAS, ARCH_R8A7795, ARCH_R8A7796 and ARCH_R8A77965) are enabled
only.
As GPIOs are a critical resource for proper operation on Renesas
platforms, this patch selects GPIOLIB, just like is done for other SoC
vendors, and on Renesas arm32 SoCs.
Reported-by: Alexandru Gheorghe <Alexandru_Gheorghe@mentor.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Improve patch description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Pull ARM SoC platform updates from Arnd Bergmann:
"A couple of platforms change hands in the MAINTAINERS file:
- Linus Walleij lists himself for the ARM Reference platforms:
versatile, vexpress, integrator and realview. He has been the main
contributor for these for a while, and makes it official now.
- Vladimir Zapolskiy takes over the LPC18xx platform from Joachim
Eastwood
- Manivannan Sadhasivam becomes a secondary maintainer for the
Actions Semi machines
- Nicolas Ferre lists updates the MAINTAINER listing for the AT91
platform: Ludovic Desroches is now a co-maintainer for the
platform, and several other people (Claudiu Beznea, Cristian
Birsan, Eugen Hristev, Codrin Ciubotariu) take over individual
device drivers.
Thanks everyone for working on this, and welcome to the new
maintainers!
The "virt" platform on qemy or kvm can now be used in big-endian mode
without additional tricks, thanks to Jason Donenfeld.
Once again, we gain support for another NXP i.MX6 variant, this time
it's the i.MX 6ULZ 32-bit single-core version.
On arm64, we add support for two SoCs from Renesas: RZ/G2E (r8a774c0)
and RZ/G2M (r8a774a1). These are described as microcontrollers on the
manufacturer website, but appear to be rather powerful. The RZ/G2M is
used on the reference board for the CIP Super Long Term Support (SLTS)
Linux Kernels"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
MAINTAINERS: Assign myself as a maintainer of ARM/LPC18XX architecture
arm64: exynos: Enable generic power domain support
MAINTAINERS: remove non-exsiting email address of Baoyou
MAINTAINERS: fix pattern in ARM/Synaptics berlin SoC section
MAINTAINERS: Drop dt-bindings/genpd/k2g.h
ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
arm64: actions: Enable PINCTRL in platforms Kconfig
MAINTAINERS: Add entry for Actions Semi Owl SoCs DMA driver
MAINTAINERS: Add entry for Actions Semiconductor Owl I2C driver
MAINTAINERS: Update clock binding entry for Actions Semi Owl SoCs
ARM: imx: add i.mx6ulz msl support
ARM: Assume maintainership of ARM reference designs
ARM: support big-endian for the virt architecture
MAINTAINERS: sdhci: move the Microchip entry to proper location
MAINTAINERS: move former ATMEL entries to proper MICROCHIP location
MAINTAINERS: remove the / ATMEL string from MICROCHIP entries
MAINTAINERS: iio: add co-maintainer to SAMA5D2-compatible ADC driver
MAINTAINERS: pwm: add entry for Microchip pwm driver
MAINTAINERS: dmaengine: add files to Microchip dma entry
MAINTAINERS: USB: change maintainer for Microchip USBA gadget driver
...
|
Linus Torvalds
Arnd Bergmann
Stephen Boyd
Rob Herring
Geert Uytterhoeven
Tejas Patel
Chunyan Zhang
Olof Johansson
Mihaela Martinas
Andreas Färber
Stefan Wahren
Pankaj Dubey
Anson Huang
YueHaibing
Doug Berger
Jim Quinlan
Florian Fainelli
Thomas Gleixner
Sameer Pujar
Lokesh Vutla
Dinh Nguyen
Eric Anholt
Anders Roxell
Manivannan Sadhasivam
Jerome Brunet
Lucas Stach
Takeshi Kihara