aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/amlogic (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03arm64: dts: meson-axg: s400: disable emmcJerome Brunet1-1/+1
While it is possible to rework the s400 board to solder an eMMC on it, it is not the default option and most boards are fitted with a NAND instead. Let's disable the emmc device by default to reflect this. The board equipped with an eMMC will just have to alter the DT in the bootloader, like we do for the reserved memory regions. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-10-03arm64: dts: meson-axg: s400: add missing emmc pwrseqJerome Brunet1-0/+2
eMMC pwrseq is defined in the s400 dts but not used in the emmc node. This is probably just a copy/paste error Fixes: 221cf34bac54 ("ARM64: dts: meson-axg: enable the eMMC controller") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-26arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT supportJianxin Pan3-0/+202
Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC, which describe components as follows: Reserve Memory, CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-14arm64: dts: meson: Fix erroneous SPI bus warningsRob Herring2-2/+2
dtc has new checks for SPI buses. The meson dts files have a node named spi' which causes false positive warnings. As the node is a pinctrl child node, change the node name to be 'spi-pins' to fix the warnings. arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-13arm64: dts: meson: Switch simple-mfd and syscon orderNeil Armstrong2-4/+4
The order between "syscon" and "simple-mfd" is important because in these particular cases, the node needs to be first a "simple-mfd" to expose it's sub-nodes, and later on a "syscon" to permit other nodes to access this register space through the "syscon" mechanism. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg-s400: Add chosen and memory nodesNeil Armstrong1-0/+9
Add missing chosen and memory nodes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg: use the proper compatible for ethmacNeil Armstrong1-1/+1
Use the correct compatible for the AXG ethernet mac node. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg: s400: add pdm to the sound cardJerome Brunet1-0/+18
Enable the PDM input device on the S400 and it to the sound card Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg: s400: add dmic codecJerome Brunet1-0/+9
There are 7 digital mics on the MIC daughter board attached to the s400 board, so add the digital microphone codec to its DTS Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg: add pdmJerome Brunet1-0/+12
Add the PDM device of the axg audio subsystem Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-gx: add dmcbus and canvas nodes.Maxime Jourdan1-0/+13
DMC is a small memory region with various registers, including the ones needed for the canvas module. Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson: libretech: update board modelJerome Brunet1-1/+1
There is actually several different libretech board with the CC suffix so the model name is not appropriate here. Update to something more specific Reported-by: Da Xue <da@lessconfused.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-gx: increase default shared CMA pool sizeChristian Hewitt1-1/+1
Devices using the new V4L2 mem2mem vdec require a larger CMA pool. As nearly all GX* devices are video/media focused and will use it, set a larger (256MB) default value. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-09-12arm64: dts: meson-axg: sort nodes consistentlyJerome Brunet2-921/+921
Sort DT nodes by address when possible, by node node name otherwise. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-29arm64: dts: meson-axg: s400: add sound cardJerome Brunet1-0/+108
Add the sound card of the s400. With it the following interface should be working: * Lineout * Daugther card speaker 1 (same output as lineout) * Linein * SPDIF output Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-29arm64: dts: meson-axg: s400: enable audio devicesJerome Brunet1-0/+72
Enable the audio devices on the s400. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-08-29arm64: dts: meson-axg: add audio fifosJerome Brunet1-0/+67
Add TODDR and FRDDR audio fifos of the AXG SoC. These fifos are the capture and playback memory interfaces of audio subsystem of the AXG. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-31Merge tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dtOlof Johansson2-0/+206
Amlogic 64-bit DT updates for v4.19, round 3 - add DT support for AXG Audio * tag 'amlogic-dt64-3' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator arm64: dts: meson-axg: add vcc 5v regulator on the s400 arm64: dts: meson-axg: improve power supplies description Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-25Merge tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dtOlof Johansson4-0/+82
Amlogic 64-bit DT changes for v4.19, round 2 - new SoC: S905W - new boards: based on S905W: Amlogic P281, Oranth Tanix TX3 Mini - AXG: add DT for new audio clock controller * tag 'amlogic-dt64-2-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd. ARM64: dts: meson-axg: add the audio clock controller clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-25arm64: dts: meson-axg: add spdif-dit codecJerome Brunet1-0/+7
Add the SPDIF playback codec to the axg s400 board Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add lineout codecJerome Brunet1-0/+9
Add the es7154 digital to analog converter which supplies the lienout jack of the s400 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add linein codecJerome Brunet1-0/+10
Add the es7241 analog to digital converter which is fed by the lienin jack of the s400 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add tdm interfacesJerome Brunet1-0/+33
Add the devices reponsible for managing the i2s/tdm clocks and pads Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add tdmout formattersJerome Brunet1-0/+42
Add the tdm devices responsible for serializing audio samples for i2s/tdm interfaces Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add tdmin formattersJerome Brunet1-0/+56
Add the tdm devices responsible for decoding the data provided through audio serial interface. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-25arm64: dts: meson-axg: add spdifoutJerome Brunet1-0/+11
Add the SPDIF output device of the axg audio subsystem Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-24arm64: dts: meson-axg: add audio arb reset controllerJerome Brunet1-0/+7
Add the audio memory arbiter which control the access of the audio fifos to the DDR. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-24arm64: dts: meson-axg: add usb power regulatorJerome Brunet1-0/+11
The usb power regulator is supplied by the vcc 5v regulator and controlled by a GPIO. This will be needed to enable usb. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-24arm64: dts: meson-axg: add vcc 5v regulator on the s400Jerome Brunet1-0/+11
This regulator is controlled by a GPIO and supplies various devices on the board, such as the lineout codec, the usb supply or the lcd controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-24arm64: dts: meson-axg: improve power supplies descriptionJerome Brunet1-0/+9
Add the parent supply of the s400 power supplies. Also add 'regulator-always-on' property on the regulators which can't be disabled Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-21Merge tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dtOlof Johansson11-25/+564
Amlogic 64-bit DT updates for v4.19 - new SoC: S805x - new board: S805x-based P241 board from Amlogic - AXG: add ADC support w/buttons, add pins for PDM, SPDIF - AXG: s400 board: preliminary support for audio - GX: nanopi-k2: add HDMI, CEC, CVBS support * tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-axg: add pdm pins ARM64: dts: meson-axg: add spdif input pins ARM64: dts: meson-axg: remove spdif out from gpio a7 ARM64: dts: meson-axg: add adc buttons the S400 ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi ARM64: dts: meson-axg: add saradc support ARM64: dts: add S805X based P241 board dt-bindings: amlogic: Add support for GXL S805X and the P241 board ARM64: dts: amlogic: Add missing cooling device properties for CPUs ARM64: dts: meson-axg: add spdif output pins ARM64: dts: meson-axg: add s400 speaker amplifier ARM64: dts: meson-axg: add s400 main 12v supply ARM64: dts: meson-axg: add s400 microphone card leds ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-20ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 MiniMartin Blumenstingl2-0/+23
The Tanix TX3 Mini is a TV box based on the Amlogic S905W chipset. There are two variants: - 1 GiB or 2 GiB of DDR3 memory - 8 GB or 16 GB eMMC flash Both variants come with: - 802.11 b/g/n wifi (Silicon Valley Microelectronics SSV6051, does not support Bluetooth) - an LED 7 segment display with an FD628 controller - HDMI and AV (CVBS) output - 2x USB (utilizing both USB ports provided by the SoC) - micro SD card slot - serial console (uart_AO) has to be soldered after opening the case The board seems to be very similar to the P23x and Q20x reference boards, which is why it includes meson-gx-p23x-q20x.dtsi: - eMMC reset routed to BOOT_9 - the SDIO wifi chip's reset line is routed to GPIOX_6 and the reference clock is 32.768KHz on PWM_E - SD card detection is routed to CARD_6 - vqmmc of all MMC controllers is hard-wired to 1.8V (VDDIO_BOOT) - uart_AO can be accessed after opening the case and soldering RX, TX and GND lines onto the exposed solder points (marked with RX, TX and GND) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 boardMartin Blumenstingl2-0/+23
S905W is a new SoC from the GXL series. It is a cost-reduced version of the S905X. The P281 development board from Amlogic uses the same layout as the P231 (S905D development board). Thus the new P281 board inherits meson-gx-p23x-q20x.dtsi to avoid code-duplication. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add the audio clock controllerJerome Brunet1-0/+36
Add the audio clock controller which is part of the audio bus This controller takes 8 input plls, and the usual clock gate, from the main clock controller. It provides the clocs for the all the devices of the audio subsystem, such as tdms, spdif, pdm, etc. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add pdm pinsJerome Brunet1-0/+42
Add pdm input pin definitions to meson AXG Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add spdif input pinsJerome Brunet1-0/+35
Add spdif input pin definitions to meson AXG Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: remove spdif out from gpio a7Jerome Brunet1-7/+0
Spdif out in not multiplexed on gpio A7 (spdif in is) Remove this entry to fix the problem. Fixes: 53c03b0aff36 ("ARM64: dts: meson-axg: add spdif output pins") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add adc buttons the S400Jerome Brunet1-0/+44
Add the 6 adc buttons of the amlogic S400 Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsiJerome Brunet1-7/+0
Regulator should not be defined inside the SoC dtsi file. vddio_ao18 is already defined in the S400 board dts anyway. Fixes: bb8a2ebd0498 ("ARM64: dts: meson-axg: add saradc support") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add saradc supportXingyu Chen2-0/+26
Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC. Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: add S805X based P241 boardNeil Armstrong2-0/+219
The Amlogic P241 board is the Reference Design board for the S805X variant of the Amlogic Meson GXL SoC family. The P241 board has the following features : - 1GiB DDR4 Memory - HDMI Connector with CEC - A/V jack with Stereo Audio and CVBS - 10/100 Ethernet - 2x USB2.0 Type-A - On-board WiFi SDIO Module - On-board eMMC storage - Infraread Received - Factory Reset button - UART connector Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: amlogic: Add missing cooling device properties for CPUsViresh Kumar1-0/+24
The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> [khilman: s/arm64/ARM64/ in Subject] Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add spdif output pinsJerome Brunet1-0/+42
Add the different pin configurations for the spdif output Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add s400 speaker amplifierJerome Brunet1-0/+13
Add the first of the two tas5707 power amplifier present on the speaker daughter board. According to the schematics of the S400 v3, only I2SB_DIN3 and I2SC_DOUT2 will be available to the speaker board. 9R83, 9R84 and 9R18 are not connected so no audio signal will be provided to the second amplifier. There is no point in enabling it even if it is visible on the i2c bus. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add s400 main 12v supplyJerome Brunet1-0/+7
Add a fixed regulator for the main 12v which is the main power supply of the board. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-axg: add s400 microphone card ledsJerome Brunet1-0/+42
The microphone card connected to the s400 has 6 leds controlled through an additional i2c gpio controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodesNeil Armstrong1-0/+48
The Amlogic Meson GXBB based Nanopi-K2 board has an HDMI connector with CEC and CVBS available on the 40pin header. This patch adds the nodes to enable HDMI, CEC and CVBS functionnalities. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dtsMartin Blumenstingl5-5/+28
meson-gx-p23x-q20x.dtsi is currently used by five boards: - Amlogic P230 and P231 (which should be identical, apart from the external RGMII PHY on P230 whereas P231 can only use the internal PHY) - Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC instead of a GXL S905D SoC) - NEXBOX A1 (based on the S912 GXM SoC) The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the other Amlogic reference design boards are very similar it's safe to assume that these also use a Broadcom based SDIO wifi chip (which is also how it was configured in meson-gx-p23x-q20x.dtsi). However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module, which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset. Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the four Amlogic reference board's .dts files. There are no devicetree bindings for the QCA9377 SDIO wifi module yet, so nothing is added to meson-gxm-nexbox-a1.dts. Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-07-20ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsiMartin Blumenstingl3-24/+12
meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node (and configure it's vref-supply "VDDIO_AO18") in their corresponding .dts file. Move both (the saradc node as well as the VDDIO_AO18 regulator) to remove some duplicate code. As a positive side-effect this enables the saradc also for the P231 (GXL S905D) and Q201 (GXM S912) development boards which are similar to the P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while P230 and Q200 have an external RGMII PHY). Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-06-27ARM64: dts: meson-gxl: fix Mali GPU compatible stringMartin Blumenstingl1-1/+1
meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL specific compatible string instead of the GXBB one. For now this is purely cosmetic since the (out-of-tree) lima driver for this GPU currently uses the "arm,mali-450" match instead of the SoC specific one. However, update the .dts to match the documentation since this driver behavior might change in the future. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.