aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-04Merge tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixesOlof Johansson14-49/+150
Amlogic 64-bit DT updates for v4.14 (round 3) - updates for new MMC driver features/fixes - support high-speed modes * tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes ARM64: dts: meson-gxl: libretech-cc: enable high speed modes ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times ARM64: dts: meson: add mmc clk gate pins ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes ARM64: dts: meson-gx: Use correct mmc clock source 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-10-03Merge tag 'v4.14-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixesOlof Johansson2-73/+5
Adding the operating points on rk3368 like they were did not end up well for the boards as all of them are missing their cpu supplies, the OPPs actually need to follow the <target min max> format as the regulator is shared between both clusters and the one rk3368 board I have, somehow also doesn't like the higher opps at all - all of which I only realized after I brought my rk3368 board online again, after its bootloader broke. So we revert that OPP addition for now. And also two fixes for the mipi dsi controller on rk3399, which was referencing a clock to high up in the clock-tree so that an intermediate gate could be disabled inadvertently and also needs a clock for its area in the general register files of the rk3399 soc. * tag 'v4.14-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399 arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399 Revert "arm64: dts: rockchip: Add basic cpu frequencies for RK3368" Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-26arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399Nickey Yang1-2/+2
The clk of grf must be enabled before writing grf register for rk3399. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> [the grf clock is already part of the binding since march 2017] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-09-19arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399Nickey Yang1-1/+1
There is a further gate in between the mipidphy reference clock and the actual ref-clock input to the dsi host, making the clock hirarchy look like clk_24m --> Gate11[14] --> clk_mipidphy_ref --> Gate21[0] --> clk_dphy_pll Fix the clock reference so that the whole clock subtree gets enabled when the dsi host needs it. Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> [amended commit message] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-09-19arm64: dt marvell: Fix AP806 system controller sizeBaruch Siach1-2/+2
Extend the container size to 0x2000 to include the gpio controller at offset 0x1040. While at it, add start address notation to the gpio node name to match its 'offset' property. Fixes: 63dac0f4924b ("arm64: dts: marvell: add gpio support for Armada 7K/8K") Cc: <stable@vger.kernel.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-17Revert "arm64: dts: rockchip: Add basic cpu frequencies for RK3368"Heiko Stuebner1-70/+2
This reverts commit 6f2dea1f5fdb73eb2e050d9ebe990121d557e519. Without accurate cpu regulators being set for boards this will wreak havoc when cpufreq-dt begins to set new frequencies without adjusting the core frequency. Additionally the rk3368 has an unsolved issue in that it has two separate cpu clusters with separate clock lines but only one cpu supply regulator for both clusters, which causes even more problems. While it seems that originally only one cluster was supposed to be active at a time (big or little), talking with real users of the hardware revealed that having all 8 cores accessible at 1.2GHz max is way more liked than having 4 cores at 1.5GHz max. Such an approach needs changes to cpufreq and/or opp though to control the two separate clock lines when setting both clusters to the same frequencies. In any case, having the OPPs in the dts at this point in time is undesireable, so remove them again for now. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-09-10Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds150-428/+9777
Pull ARM/arm64 Devicetree updates from Olof Johansson: "As usual, device tree updates is the bulk of our material in this merge window. This time around, 559 patches affecting both 32- and 64-bit platforms. Changes are too many to list individually, but some of the larger ones: New platform/SoC support: - Automotive: + Renesas R-Car D3 (R8A77995) + TI DT76x + MediaTek mt2712e - Communication-oriented: + Qualcomm IPQ8074 + Broadcom Stingray + Marvell Armada 8080 - Set top box: + Uniphier PXs3 Besides some vendor reference boards for the SoC above, there are also several new boards/machines: - TI AM335x Moxa UC-8100-ME-T open platform - TI AM57xx Beaglebone X15 Rev C - Microchip/Atmel sama5d27 SoM1 EK - Broadcom Raspberry Pi Zero W - Gemini-based D-Link DIR-685 router - Freescale i.MX6: + Toradex Apalis module + Apalis and Ixora carrier boards + Engicam GEAM6UL Starter Kit - Freescale i.MX53-based Beckhoff CX9020 Embedded PC - Mediatek mt7623-based BananaPi R2 - Several Allwinner-based single-board computers: + Cubietruck plus + Bananapi M3, M2M and M64 + NanoPi A64 + A64-OLinuXino + Pine64 - Rockchip RK3328 Pine64/Rock64 board support - Rockchip RK3399 boards: + RK3399 Sapphire module on Excavator carrier (RK3399 reference design) + Theobroma Systems RK3399-Q7 SoM - ZTE ZX296718 PCBOX Board" * tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits) ARM: dts: at91: at91sam9g45: add AC97 arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support ARM: dts: uniphier: add pinctrl groups of ethernet phy mode ARM: dts: uniphier: fix size of sdctrl nodes ARM: dts: uniphier: add AIDET nodes arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2" arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM ARM: dts: rockchip: enable usb for rv1108-evb ARM: dts: rockchip: add usb nodes for rv1108 SoCs dt-bindings: update grf-binding for rv1108 SoCs ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers ...
2017-09-08Merge tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-3/+5
Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-0/+56
Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...
2017-09-05Merge branch 'next/dt64' into next/dtOlof Johansson144-297/+9776
* next/dt64: (233 commits) arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 arm64: dts: uniphier: add PXs3 SoC support arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes arm64: dts: uniphier: add reset controller node of analog amplifier arm64: dts: marvell: add Device Tree files for Armada-8KP arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names ARM64: dts: meson-gx: Add AO CEC nodes ARM64: dts: meson-gx: update AO clkc to new bindings arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: zynqmp: Add generic compatible string for I2C EEPROM ...
2017-09-05ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 modeJerome Brunet1-1/+2
SDR104 seems to be OK on the nanopi-k2 SBC so enable it Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modesJerome Brunet1-0/+3
Enable UHS modes, up to SDR50, on the nanopi-k2 SBC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modesJerome Brunet1-0/+3
Enable sdcard UHS modes, up to SDR50, on p20x based boards. While the s905 supports SDR104 mode, it appears that the PCB of p20x based boards can't cope with a rate as high as 200Mhz. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gxl: libretech-cc: enable high speed modesJerome Brunet1-0/+4
Enable sdcard UHS modes up to SDR50. Unfortunately, it seems the PCB of the libretech-cc cannot handle SDR104 at 200Mhz reliably. Also enable eMMC DDR52 mode. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gxl: libretech-cc: add card regulator settle timesJerome Brunet1-0/+3
Changing the card voltage on the cc is not instantaneous, especially when switching from 3.3v to 1.8v. It take at least 30ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: 61ff2af9b278 ("ARM64: dts: fixup libretech cc definition") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle timesJerome Brunet1-0/+3
Changing the card voltage on the nanopi-k2 is not instantaneous, especially when switching from 3.3v to 1.8v. It take at least 3ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: 9bc7ffb08daf ("arm64: dts: amlogic: Add NanoPi K2") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson: add mmc clk gate pinsJerome Brunet13-31/+126
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson: remove cap-sd-highspeed from emmc nodesJerome Brunet11-11/+0
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-05ARM64: dts: meson-gx: Use correct mmc clock source 0Jerome Brunet2-6/+6
Now that the clock source 0 is properly described in the CCF, use it instead of assuming the default value (xtal) Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-09-04Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-6/+37
Pull irq updates from Thomas Gleixner: "The interrupt subsystem delivers this time: - Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support - Initial GIC-V4 support - Consolidation of the FSL MSI support - Utilize the effective affinity interface in various ARM irqchip drivers - Yet another interrupt chip driver (UniPhier AIDET) - Bulk conversion of the irq chip driver to use %pOF - The usual small fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) irqchip/ls-scfg-msi: Add MSI affinity support irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support irqchip/ls-scfg-msi: Add LS1046a MSI support arm64: dts: ls1046a: Add MSI dts node arm64: dts: ls1043a: Share all MSIs arm: dts: ls1021a: Share all MSIs arm64: dts: ls1043a: Fix typo of MSI compatible string arm: dts: ls1021a: Fix typo of MSI compatible string irqchip/ls-scfg-msi: Fix typo of MSI compatible strings irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask irqchip/mmp: Make mmp_intc_conf const irqchip/gic: Make irq_chip const irqchip/gic-v3: Advertise GICv4 support to KVM irqchip/gic-v4: Enable low-level GICv4 operations irqchip/gic-v4: Add some basic documentation irqchip/gic-v4: Add VLPI configuration interface irqchip/gic-v4: Add VPE command interface irqchip/gic-v4: Add per-VM VPE domain creation irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared ...
2017-09-03Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-6/+0
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.14 merge window. I'm sending this early, as my continuing journey into fatherhood is occurring really soon now, I'm going to be mostly useless for the next couple of weeks, though I may be able to read email, I doubt I'll be doing much patch applications or git sending. If anything urgent pops up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards you. Outside drm changes: Some rcar-du updates that touch the V4L tree, all acks should be in place. It adds one export to the radix tree code for new i915 use case. There are some minor AGP cleanups (don't see that too often). Changes to the vbox driver in staging to avoid breaking compilation. Summary: core: - Atomic helper fixes - Atomic UAPI fixes - Add YCBCR 4:2:0 support - Drop set_busid hook - Refactor fb_helper locking - Remove a bunch of internal APIs - Add a bunch of better default handlers - Format modifier/blob plane property added - More internal header refactoring - Make more internal API names consistent - Enhanced syncobj APIs (wait/signal/reset/create signalled) bridge: - Add Synopsys Designware MIPI DSI host bridge driver tiny: - Add Pervasive Displays RePaper displays - Add support for LEGO MINDSTORMS EV3 LCD i915: - Lots of GEN10/CNL support patches - drm syncobj support - Skylake+ watermark refactoring - GVT vGPU 48-bit ppgtt support - GVT performance improvements - NOA change ioctl - CCS (color compression) scanout support - GPU reset improvements amdgpu: - Initial hugepage support - BO migration logic rework - Vega10 improvements - Powerplay fixes - Stop reprogramming the MC - Fixes for ACP audio on stoney - SR-IOV fixes/improvements - Command submission overhead improvements amdkfd: - Non-dGPU upstreaming patches - Scratch VA ioctl - Image tiling modes - Update PM4 headers for new firmware - Drop all BUG_ONs. nouveau: - GP108 modesetting support. - Disable MSI on big endian. vmwgfx: - Add fence fd support. msm: - Runtime PM improvements exynos: - NV12MT support - Refactor KMS drivers imx-drm: - Lock scanout channel to improve memory bw - Cleanups etnaviv: - GEM object population fixes tegra: - Prep work for Tegra186 support - PRIME mmap support sunxi: - HDMI support improvements - HDMI CEC support omapdrm: - HDMI hotplug IRQ support - Big driver cleanup - OMAP5 DSI support rcar-du: - vblank fixes - VSP1 updates arcgpu: - Minor fixes stm: - Add STM32 DSI controller driver dw_hdmi: - Add support for Rockchip RK3399 - HDMI CEC support atmel-hlcdc: - Add 8-bit color support vc4: - Atomic fixes - New ioctl to attach a label to a buffer object - HDMI CEC support - Allow userspace to dictate rendering order on submit ioctl" * tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits) drm/syncobj: Add a signal ioctl (v3) drm/syncobj: Add a reset ioctl (v3) drm/syncobj: Add a syncobj_array_find helper drm/syncobj: Allow wait for submit and signal behavior (v5) drm/syncobj: Add a CREATE_SIGNALED flag drm/syncobj: Add a callback mechanism for replace_fence (v3) drm/syncobj: add sync obj wait interface. (v8) i915: Use drm_syncobj_fence_get drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2) drm/syncobj: Rename fence_get to find_fence drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate drm/vmwgfx: Bump the version for fence FD support drm/vmwgfx: Add export fence to file descriptor support drm/vmwgfx: Add support for imported Fence File Descriptor drm/vmwgfx: Prepare to support fence fd drm/vmwgfx: Fix incorrect command header offset at restart drm/vmwgfx: Support the NOP_ERROR command drm/vmwgfx: Restart command buffers after errors drm/vmwgfx: Move irq bottom half processing to threads drm/vmwgfx: Don't use drm_irq_[un]install ...
2017-09-01Merge tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu into next/dt64Olof Johansson3-6/+74
mvebu dt64 for 4.14 (part 4) Adding more resources on the network controller ppv2.2 on Armada 7K/8K allowing to use last improvement introduced in the driver. Also enabling more network ports on the mcbin (A8K base board) * tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-01Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64Olof Johansson9-135/+3
Allwinner fixes for 4.13, take 3 This is a revert of the EMAC bindings. The discussion has not settled down yet on a proper representation of the PHY, and therefore we cannot commit to a binding yet * tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
2017-09-01Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dtOlof Johansson9-132/+3
Allwinner fixes for 4.13, take 3 This is a revert of the EMAC bindings. The discussion has not settled down yet on a proper representation of the PHY, and therefore we cannot commit to a binding yet * tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-01Merge tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson1-2/+2
mvebu fixes for 4.13 (part 3) Fix number of GPIOs in AP806 description for Armada 7K/8K * tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: fix number of GPIOs in Armada AP806 description Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-31arm64: dts: ls1046a: Add MSI dts nodeMinghuan Lian1-0/+31
LS1046a includes 3 MSI controllers. Each controller supports 128 interrupts. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31arm64: dts: ls1043a: Share all MSIsMinghuan Lian1-3/+3
In order to maximize the use of MSI, a PCIe controller will share all MSI controllers. The patch changes "msi-parent" to refer to all MSI controller dts nodes. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-31arm64: dts: ls1043a: Fix typo of MSI compatible stringMinghuan Lian1-3/+3
"1" should be replaced by "l". This is a typo. The patch is to fix it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-30arm64: dts: marvell: fix number of GPIOs in Armada AP806 descriptionThomas Petazzoni1-2/+2
The Armada AP806 has 20 pins, and therefore 20 GPIOs (from 0 to 19 included) and not 19 pins. Therefore, we fix the Device Tree description for the GPIO controller. Before this patch: $ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges GPIO ranges handled: 0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19] 0: f06f4000.system-controller:gpio GPIOS [0 - 18] PINS [0 - 18] After this patch: $ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges GPIO ranges handled: 0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19] 0: f06f4000.system-controller:gpio GPIOS [0 - 19] PINS [0 - 19] Fixes: 63dac0f4924b9 ("arm64: dts: marvell: add gpio support for Armada 7K/8K") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-30arm64: dts: marvell: mcbin: enable more networking portsAntoine Tenart1-0/+30
This patch enables the two GE/SFP ports. They are configured in 10GKR mode by default. To do this the cpm_xdmio is enabled as well, and two phy descriptions are added. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-30arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 nodeAntoine Tenart2-0/+2
The network driver on Marvell SoC (7k/8k) needs to access some registers in the system controller to configure its ports at runtime. This patch adds a phandle reference to the syscon system controller node in the ppv2 node. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Tested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-30arm64: dts: marvell: add TX interrupts for PPv2.2Thomas Petazzoni2-6/+42
This commit updates the Marvell Armada 7K/8K Device Tree to describe the TX interrupts of the Ethernet controllers, in both the master and slave CP110s. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-29Merge tag 'uniphier-dt64-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64Olof Johansson5-2/+468
UniPhier ARM64 SoC DT updates for v4.14 (2nd) - add reset controller node of analog amplifier - add AIDET irqchip device nodes - fix size of sdctrl node - support new SoC PXs3 and its reference development board * tag 'uniphier-dt64-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add PXs3 SoC support arm64: dts: uniphier: fix size of sdctrl node arm64: dts: uniphier: add AIDET nodes arm64: dts: uniphier: add reset controller node of analog amplifier Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-29Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixesOlof Johansson8-135/+0
Allwinner fixes for 4.13, take 3 This is a revert of the EMAC bindings. The discussion has not settled down yet on a proper representation of the PHY, and therefore we cannot commit to a binding yet * tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-29Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64Olof Johansson14-6/+164
Amlogic 64-bit DT updates for v4.14, round 2 - clock updates w/dependencies on clock tree - GPIO names updates * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names ARM64: dts: meson-gx: Add AO CEC nodes ARM64: dts: meson-gx: update AO clkc to new bindings dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock clk: meson: gxbb: Add sd_emmc clk0 clkids clk: meson-gxbb: expose almost every clock in the bindings clk: meson8b: expose every clock in the bindings clk: meson: gxbb: fix protection against undefined clks clk: meson: meson8b: fix protection against undefined clks dt-bindings: clock: meson8b: describe the embedded reset controller Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-29Merge tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu into next/dt64Olof Johansson5-0/+388
mvebu dt64 for 4.14 (part 3) Add description for a new family SoC from Marvell: Armada-8KP. * tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: add Device Tree files for Armada-8KP Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-29arm64: dts: rockchip: convert PCIe to use per-lane PHYs for rk3339Shawn Lin1-3/+5
Convert all RK3399 platforms to use per-lane PHY model in order to save more power by idling unused lane(s). Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org>
2017-08-29arm64: dts: uniphier: add PXs3 SoC supportMasahiro Yamada3-1/+431
Initial support for PXs3 SoC and its reference development board. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-28arm64: dts: uniphier: fix size of sdctrl nodeMasahiro Yamada1-1/+1
All registers are located within 0x400 size from the base address. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-28arm64: dts: uniphier: add AIDET nodesMasahiro Yamada2-0/+14
Add UniPhier AIDET (ARM Interrupt Detector) nodes to support active low interrupts. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-28arm64: dts: allwinner: Revert EMAC changesMaxime Ripard8-135/+0
Since the discussion is not settled yet for the EMAC, and that the release in getting really close, let's revert the changes for now, and we'll reintroduce them later. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-08-26arm64: dts: uniphier: add reset controller node of analog amplifierKatsuhiro Suzuki2-0/+22
This patch adds reset controller node of analog signal amplifier core (ADAMV) for UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-08-25arm64: dts: exynos: remove i80-if-timings nodesAndrzej Hajda1-6/+0
Since i80/command mode is determined in runtime by propagating info from panel this property can be removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-08-24Merge tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64Arnd Bergmann12-9/+2808
Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner: 3 new boards, the rk3328-based Rock64 from the Pine64-makers, the Sapphire som+baseboard which is another evaluation board for Rocckhip customers and the rk3399-based som+baseboard from Austria-based Theobroma Systems, which interestingly is in a miniITX formfactor and provides a real PCIe x4 slot. New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus, on rk3328 iommus, pwm, thermal management, and sound as well as operating points and rk3368 got iommu nodes and cpu operating points. On existing boards firefly got operating points, the rk3328-evb got its pmic and gru boards got some sound-related fixes. * tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM dt-bindings: add rk3399-q7 SoM arm64: dts: rockchip: add rk3328-rock64 board arm64: dts: rockchip: add rk3328 pdm node arm64: dts: rockchip: add more rk3399 iommu nodes arm64: dts: rockchip: add rk3368 iommu nodes arm64: dts: rockchip: add rk3328 iommu nodes arm64: dts: rockchip: Add basic cpu frequencies for RK3368 arm64: dts: rockchip: add rk805 node for rk3328-evb arm64: dts: rockchip: Assign mic irq to correct device for Gru arm64: dts: rockchip: init rk3399 vop clock rates arm64: dts: rockchip: Add pwm nodes for rk3328 arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3 arm64: dts: rockchip: remove num-slots property from rk3399-sapphire arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board arm64: dts: rockchip: add thermal nodes for rk3328 SoC arm64: dts: rockchip: add tsadc node for rk3328 SoC arm64: dts: rockchip: add rk3328 i2s nodes ...
2017-08-24arm64: dts: marvell: add Device Tree files for Armada-8KPHanna Hawa5-0/+388
This commit adds the base Device Tree files for the Armada 8KPlus. The Armada 8KP SoCs include several hardware blocks, and this commit only adds support for the AP810 block, that contains the CPU core and basic peripherals. AP810 is a high-performance die, includes octal core application processor based ARMv8-A architecture, two standard high speed DDR4 interface, and GIC-600 interrupt controller. AP810 Built as part of Marvell’s MoChi AP family products. Armada-8080 (8KPlus family), include an AP810 block that contains the CPU core and basic peripherals. This commit creates the following hierarchy: * armada-ap810-ap0.dtsi - definitions common to AP810 * armada-ap810-ap0-octa-core.dtsi - description of the octa cores * armada-8080.dtsi - description of the 8080 SoC * armada-8080-db.dts - description of the 8080 board Signed-off-by: Hanna Hawa <hannah@marvell.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-08-23arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoMKlaus Goger2-0/+229
Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a video connector for MIPI-DSI/CSI and eDP adapter. This dts is for usage with the RK3399-Q7 SoM Puma. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add RK3399-Q7 (Puma) SoMKlaus Goger1-0/+547
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit 1.8V interface) * SD card (on a baseboad) via edge connector * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/2x MIPI-DSI * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add rk3328-rock64 boardHeiko Stuebner2-0/+334
The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral devices interface for makers to integrate with sensors and devices. The devicetree currently supports basic peripherals, with more to be added later on. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-23arm64: dts: rockchip: add rk3328 pdm nodeSugar Zhang1-0/+77
This patch add pdm controller device node for rk3328. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-08-22ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines namesNeil Armstrong1-0/+57
This patch describes the GPIO lines usage on the LibreTech CC board. This is useful in the debugfs gpio file and using the cdev gpio API. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: minor whiespace fix] Signed-off-by: Kevin Hilman <khilman@baylibre.com>