aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-01-24arm64: dts: renesas: rzg2l-smarc: Move pinctrl definitionsBiju Das3-127/+138
RZ/G2L and RZ/G2LC SMARC EVK use the same carrier board, but the pin mappings between the RZ/G2L and the RZ/G2LC SMARC SoM are different. Therefore we need to update the carrier board pin definitions based on the corresponding SoM pin mapping. Move pinctrl definitions out of the RZ/G2L SMARC common file, so that we can reuse the common file to support RZ/G2LC SMARC EVK. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211216114305.5842-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-24arm64: dts: renesas: beacon: Remove the 'pm-ignore-notify' propertyFabio Estevam1-1/+0
The 'pm-ignore-notify' property is not a valid property and there is no bindings documentation for it. Drop such invalid property. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20211208195624.1864654-1-festevam@gmail.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-01-24arm64: dts: renesas: r8a779a0: Add INTC-EX device nodeGeert Uytterhoeven1-0/+15
Populate the device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car V3U, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/4e2297e1066df483c0434df487df5b79e76b75b8.1624460378.git.geert+renesas@glider.be
2022-01-23arm64: dts: exynos: add necessary clock inputs in Exynos7Krzysztof Kozlowski1-6/+27
Exynos7 devicetree bindings require more input clocks for TOP0 and PERIC1 clock controllers, than already provided. Existing DTS was not matching the bindings, so let's update the DTS, even though the error could be in the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220102115356.75796-1-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: exynos: Align MAX77843 nodes with dtschema on TM2Krzysztof Kozlowski1-3/+14
The newly introduced dtschema for MAX77843 MUIC require the children to have proper naming and a port@0 property. This should not have actual impact on MFD children driver binding, because the max77843 MFD driver uses compatibles. The port@0 is disabled to avoid any impact. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111174805.223732-2-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9Krzysztof Kozlowski1-1/+1
Older Samsung Exynos SoC pin controller nodes (Exynos3250, Exynos4, Exynos5, Exynos5433) with external wake-up interrupts, expected to have one interrupt for multiplexing these wake-up interrupts. Also they expected to have exactly one pin controller capable of external wake-up interrupts. It seems however that newer ARMv8 Exynos SoC like Exynos850 and ExynosAutov9 have differences: 1. No multiplexed external wake-up interrupt, only direct, 2. More than one pin controller capable of external wake-up interrupts. Use dedicated ExynosAutov9 compatible for its external wake-up interrupts controller to indicate the differences. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220111201722.327219-22-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9Krzysztof Kozlowski1-25/+25
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220111201722.327219-14-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: exynos: align pinctrl with dtschema in Exynos7Krzysztof Kozlowski2-91/+91
Align the pin controller related nodes with dtschema. No functional change expected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220111201722.327219-12-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: exynos: align pinctrl with dtschema in Exynos5433Krzysztof Kozlowski2-221/+233
Align the pin controller related nodes with dtschema. No functional change expected. The macros used to define pin configuration do not work well with node name suffix "-pin" or prefix "pin-", so level of indirection via second macro is needed. For similar reason pcie-wlanen has to stop using the macro. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220111201722.327219-11-krzysztof.kozlowski@canonical.com
2022-01-23arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF outputBrian Norris1-5/+12
Commit b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") switched the platform to SPDIF, but we didn't fix up the device tree. Drop the pinctrl settings, because the 'spdif_bus' pins are either: * unused (on kevin, bob), so the settings is ~harmless * used by a different function (on scarlet), which causes probe failures (!!) Fixes: b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-23arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG modeQuentin Schulz2-0/+15
The micro USB3.0 port available on the Haikou evaluation kit for Puma RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support was broken until now because of missing logic around the ID pin. This adds proper support for USB OTG on Puma Haikou by "connecting" the GPIO used for USB ID to the USB3 controller device. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-23arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568Frank Wunderlich1-4/+2
pclk_xpcs is not supported by mainline driver and breaks dtbs_check following warnings occour, and many more rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clocks: [[15, 386], [15, 389], [15, 389], [15, 184], [15, 180], [15, 181], [15, 389], [15, 185], [15, 172]] is too long From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clock-names: ['stmmaceth', 'mac_clk_rx', 'mac_clk_tx', 'clk_mac_refout', 'aclk_mac', 'pclk_mac', 'clk_mac_speed', 'ptp_ref', 'pclk_xpcs'] is too long From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml after removing it, the clock and other warnings are gone. pclk_xpcs on gmac is used to support QSGMII, but this requires a driver supporting it. Once xpcs support is introduced, the clock can be added to the documentation and both controllers. Fixes: b8d41e5053cd ("arm64: dts: rockchip: add gmac0 node to rk3568") Co-developed-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220123133510.135651-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-23arm64: dts: rockchip: fix dma-controller node names on rk356xFrank Wunderlich1-2/+2
DMA-Cotrollers defined in rk356x.dtsi do not match the pattern in bindings. arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml: dmac@fe530000: $nodename:0: 'dmac@fe530000' does not match '^dma-controller(@.*)?$' From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml: dmac@fe550000: $nodename:0: 'dmac@fe550000' does not match '^dma-controller(@.*)?$' From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml This Patch fixes it. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220123133615.135789-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-23arm64: dts: rockchip: add Quartz64-A usb2 supportPeter Geis1-0/+52
Add the nodes and regulators to enable usb2 support on the Quartz64 Model A. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-9-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-23arm64: dts: rockchip: add usb2 nodes to rk3568 device treePeter Geis1-0/+98
Add the requisite nodes to the rk3568 device tree to enable the usb2 device controllers. Includes the usb2phy nodes, usb2phy grf nodes, and usb2 controller nodes. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20211215210252.120923-8-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-01-17arm64: dts: meson-g12-common: add uart_ao_b pins muxingGary Bisson1-0/+27
- RX/TX signals can be mapped on 2 different pairs of pins so supporting both options - RTS/CTS signals however only have 1 option available Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112211642.2248901-4-gary.bisson@boundarydevices.com
2022-01-17arm64: dts: meson-g12-common: add more pwm_f optionsGary Bisson1-0/+16
Add missing PWM_F pin muxing for GPIOA_11 and GPIOZ_12. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112211642.2248901-3-gary.bisson@boundarydevices.com
2022-01-14Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds1-3/+2
Pull sound updates from Takashi Iwai: "It's a relatively calm development cycle, but still lots of updates in the driver side like Intel SOF. Below are some highlights: ALSA / ASoC core: - A new kselftest for ALSA control API - PCM NO_REWINDS support - Potential race fixes around control removals - Unify x86 SG-buffer memory allocation code - Cleanups and race fixes for ASoC DPCM locking ASoC: - Refinements and cleanups around the delay() APIs - Wider use of dev_err_probe(). - Continuing cleanups and improvements to the SOF code - Support for pin switches in simple-card derived cards - Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20 S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments TLV320ADC3xxx HD-audio / USB-audio: - Fix deadlock at HD-audio codec unbinding - Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec - Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device Misc: - Fix virmidi drain behavior Note that the merge of CS35L41 codec support is still half-baked, and at least one ACPI change is missing. Although this won't hinder the kernel build itself, we're going to catch up before RC1" * tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits) ALSA: hda: intel-dsp-config: reorder the config table ALSA: hda: intel-dsp-config: add JasperLake support ALSA: hda: cs35l41: fix double free on error in probe() ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses ALSA: hda: Fix dependency on ASoC cs35l41 codec ASoC: cs35l41: Add support for hibernate memory retention mode ASoC: cs35l41: Update handling of test key registers ALSA: intel_hdmi: Check for error num after setting mask ASoC: wcd9335: Keep a RX port value for each SLIM RX mux ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id ALSA: virmidi: Remove duplicated code ALSA: seq: virmidi: Add a drain operation ASoC: topology: Fix typo ASoC: fsl_asrc: refine the check of available clock divider ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev ASoC: rt5640: Add support for boards with an external jack-detect GPIO ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ ASoC: rt5640: Change jack_work to a delayed_work ASoC: rt5640: Fix possible NULL pointer deref on resume ...
2022-01-13arm64: dts: add support for S4 based Amlogic AQ222Xianwei Zhao3-0/+130
Add basic support for the Amlogic S4 based Amlogic AQ222 board: which describe components as follows: CPU, GIC, IRQ, Timer, UART. It's capable of booting up into the serial console. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed memory unit address warning] Link: https://lore.kernel.org/r/20220106112214.6987-1-xianwei.zhao@amlogic.com
2022-01-12arm64: dts: meson: add initial device-tree for H96-MaxChristian Hewitt2-0/+146
The Haochuangyi H96-Max is based on the Amlogic S905X3 reference design with the following specs: - 4GB DDR4 RAM - 32/64/128GB eMMC - HDMI 2.1 video - S/PDIF optical output - AV output - 10/100/1000 Base-T Ethernet - AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1) - 1x USB 2.0 OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Benoit Masson <yahoo@perenite.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-10-christianshewitt@gmail.com
2022-01-12arm64: dts: meson: add initial device-trees for A95XF3-AIRChristian Hewitt3-0/+239
The CYX A95XF3-AIR is based on Amlogic S905X3 reference board designs and ships in multiple configurations: – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet ... - HDMI 2.1 video - S/PDIF optical output - AV output - 1x USB 2.0 OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD - Multicolour case LED 'arc' The device-tree with -gbit suffix supports models with Gigabit Ethernet, and the device-tree with no suffix supports models with 10/100 Ethernet. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-7-christianshewitt@gmail.com
2022-01-12arm64: dts: meson: add initial device-trees for X96-AIRChristian Hewitt3-0/+247
The Amediatek X96-AIR is based on Amlogic S905X3 reference board designs and ships in multiple configurations: – 4GB DDR3 + 64GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi a/b/g/n/ac + BT + Gb Ethernet – 4GB DDR3 + 32GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet – 2GB DDR3 + 16GB eMMC + WiFi b/g/n (no BT) + 10/100 Ethernet ... - HDMI 2.1 video - S/PDIF optical output - AV output - 2x USB 2.0 inc. OTG port - 1x USB 3.0 port - IR receiver - 1x micro SD card slot (internal) - 1x Reset/Update button (in AV jack) - 7-segment VFD The device-tree with -gbit suffix supports models with Gigabit Ethernet, and the device-tree with no suffix supports models with 10/100 Ethernet. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> # X96-Air with 10/100 Eth Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-4-christianshewitt@gmail.com
2022-01-12arm64: dts: meson: add common SM1 ac2xx dtsiChristian Hewitt1-0/+300
Add a common dtsi for Android STB devices based on the Amlogic S905X3 (AC213/AC214) and S905D3 (AC201/AC202) reference designs. The dtsi is loosely based on the existing SEI610 device-tree. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # X96-Air with Gbit PHY Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220112022713.25962-2-christianshewitt@gmail.com
2022-01-12arm64: dts: meson-sm1: add spdifin and pdifout nodesArtem Lapkin1-0/+27
Add spdifin spdifout nodes for Amlogic SM1 SoCs. Signed-off-by: Artem Lapkin <art@khadas.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: subject and DT fixups from mailing-list review] Link: https://lore.kernel.org/r/20211215030236.340841-1-art@khadas.com
2022-01-10Merge tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds266-1080/+19696
Pull ARM SoC devicetree updates from Arnd Bergmann: "As usual, this is the bulk of the updates for the SoC tree, adding more devices to existing files, addressing issues from ever improving automated checking, and fixing minor issues. The most interesting bits as usual are the new platforms. All the newly supported SoCs belong into existing families this time: - Qualcomm gets support for two newly announced platforms, both of which can now work in production environments: the SDX65 5G modem that can run a minimal Linux on its Cortex-A7 core, and the Snapdragon 8 Gen 1, their latest high-end phone SoC. - Renesas adds support for R-Car S4-8, the most recent automotive Server/Communication SoC. - TI adds support for J721s2, a new automotive SoC in the K3 family. - Mediatek MT7986a/b is a SoC used in Wifi routers, the latest generation following their popular MT76xx series. Only basic support is added for now. - NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8 series. - TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we have supported for a long time. New boards with the existing SoCs include - Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers - AT91/SAMA5 based evaluation board - NXP gains twenty new development and industrial boards for their i.MX and Layerscape SoCs - Intel IXP4xx now supports the final two machines in device tree that were previously only supported in old style board files. - Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while MT8183 is used in the Acer Chromebook 314. - Qualcomm gains support for the reference machines using the two new SoCs, plus a number of Chromebook variants and phones based on the Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia devices and the Microsoft Surface Duo 2. - ST STM32 now supports the Engicam i.Core STM32MP1 carrier board. - Tegra now boots various older Android devices based on 32-bit chips out of the box, including a number of ASUS Transformer tablets. There is also a new Jetson AGX Orin developer kit. - Apple support adds the missing device trees for all the remaining M1 Macbook and iMac variants, though not yet the M1 Pro/Max versions. - Allwinner now supports another version of the Tanix TX6 set-top box based on the H6 SoC. - Broadcom gains support for the Netgear RAXE500 Wireless router based on BCM4908" * tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits) Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U" arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property ARM: dts: aspeed: add LCLK setting into LPC IBT node ARM: dts: aspeed: p10: Add TPM device ARM: dts: aspeed: p10: Enable USB host ports ARM: dts: aspeed: Add TYAN S8036 BMC machine ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config ARM: dts: aspeed: Adding Facebook Bletchley BMC ARM: dts: aspeed: g220a: Enable secondary flash ARM: dts: Add openbmc-flash-layout-64-alt.dtsi ARM: dts: aspeed: Add secure boot controller node dt-bindings: aspeed: Add Secure Boot Controller bindings ARM: dts: Remove "spidev" nodes dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 dt-bindings: arm: samsung: Document E850-96 board binding dt-bindings: Add vendor prefix for WinLink ...
2022-01-01arm64: tegra: Remove non existent Tegra194 resetSameer Pujar1-3/+2
Tegra194 does not really have "hda2codec_2x" related reset. Hence drop this entry to reflect actual HW. Fixes: 4878cc0c9fab ("arm64: tegra: Add HDA controller on Tegra194") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1640260431-11613-4-git-send-email-spujar@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-12-27ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"Dinh Nguyen2-2/+2
Because of commit 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling"), which does a write to the CQSPI_REG_WR_COMPLETION_CTRL register regardless of any condition. Well, the Cadence QuadSPI controller on Intel's SoCFPGA platforms does not implement the CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register results in a crash! So starting with v5.16, I introduced the patch 98d948eb833 ("spi: cadence-quadspi: fix write completion support"), which adds the dts compatible "intel,socfpga-qspi" that is specific for versions that doesn't have the CQSPI_REG_WR_COMPLETION_CTRL register implemented. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v3: revert back to "intel,socfpga-qspi" v2: use both "cdns,qspi-nor" and "cdns,qspi-nor-0010"
2021-12-23Merge tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-3/+3
Pull ARM SoC fixes from Arnd Bergmann: "This is my last set of fixes for 5.16, including - multiple code fixes for the op-tee firmware driver - Two patches for allwinner SoCs, one fixing the phy mode on a board, the other one fixing a driver bug in the "RSB" bus driver. This was originally targeted for 5.17, but seemed worth moving to 5.16 - Two small fixes for devicetree files on i.MX platforms, resolving problems with ethernet and i2c" * tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: optee: Suppress false positive kmemleak report in optee_handle_rpc() tee: optee: Fix incorrect page free bug arm64: dts: lx2160a: fix scl-gpios property name tee: handle lookup of shm with reference count 0 ARM: dts: imx6qdl-wandboard: Fix Ethernet support bus: sunxi-rsb: Fix shutdown arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
2021-12-22Merge tag 'arm-soc/for-5.17/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dtArnd Bergmann2-0/+51
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.17, please pull the following: - Rafal adds and documents the Netgear RAXE500 Wireless router based on the BCM4908 SoC. * tag 'arm-soc/for-5.17/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500 dt-bindings: arm: bcm: document Netgear RAXE500 binding Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-22Merge tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann79-111/+5823
Qualcomm ARM64 DeviceTree updates for v5.17 This introduces initial support for the brand new Snapdragon 8 Gen 1, aka SM8450 platform, with SMP, CPUfreq, cluster idling, low speed buses, TLMM pinctrl, SMMU, regulators, clocks, power-domains, UFS storage and USB currently supported. SDM845 adds new support for Sony Xperia XZ2, XZ2C and XZ3. The Lenovo Yoga C630 gains a few audio related fixes. The PMIC's VADC channels are described as thermal zones. OnePlus devices gains msm-id and board-id, to facilitate a single firmware image for the multiple devices. On SM8350 the Sony Xperia 1 III and 5 III, as well as initial description of Microsoft's Surface Duo 2 are introduced. On the platform side, LLCC, QUP nodes, redistributor stride and all the low-speed QUPs are added MSM8996 gained various regulator fixes, and adsp firmware name to faciliate pushing firmware to linux-firmware. Xiaomi Mi Note 2 gained touchkey controller definition. On SDM660 the Xiaomi Redmi Note 7 gained power and volume keys, RPM and regulator definitions, USB, eMMC and SD-card and a simple-framebuffer description. MSM8916 has the mmc aliases corrected, to stop the storage devices to move around and the RPM sleep stats memory is described. Support for the Samsung J5 2015 smartphone is introduced. SM6350 validation errors are fixed and and description of the audio, compute and modem remoteprocs are added. A couple new revisions of the SC7180 based Google devices are added. The SC7280 platform gains venus and a few fixes. The CRD development device is introduced, with the EC, touchscreen and touchpad. On SM8250 CPU opp-tables, for scaling L3 cache and DDR frequency based on CPU frequency, are added. As is TX, RX macros and SoundWire blocks and used to enable audio on the SM8350 MTP. * tag 'qcom-arm64-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (92 commits) arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX arm64: dts: qcom: sm8450-qrd: Enable USB nodes arm64: dts: qcom: sm8450: Add usb nodes arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodes arm64: dts: qcom: sm8450: add cpufreq support arm64: dts: qcom: sm8450: Add rpmhpd node arm64: dts: qcom: sm8450-qrd: enable ufs nodes arm64: dts: qcom: sm8450: add ufs nodes arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodes arm64: dts: qcom: Add base SM8450 QRD DTS arm64: dts: qcom: sm8450: add smmu nodes arm64: dts: qcom: sm8450: Add reserved memory nodes arm64: dts: qcom: sm8450: Add tlmm nodes arm64: dts: qcom: Add base SM8450 DTSI arm64: dts: qcom: ipq6018: Fix gpio-ranges property arm64: dts: qcom: sdm845: add QFPROM chipset specific compatible arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node arm64: qcom: dts: drop legacy property #stream-id-cells Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer" ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-22arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCXBjorn Andersson1-2/+2
The SM6125_VDDCX constant is introduced through a separate branch and is not available in the dts branch. Temporarily replace the constant with it's value to avoid the build breakage. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-12-20arm64: dts: qcom: sm8450-qrd: Enable USB nodesVinod Koul1-0/+23
Enable the usb phy and usb controller in peripheral mode. This helps to get the adb working with the QRD board. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211216110813.658384-2-vkoul@kernel.org
2021-12-20arm64: dts: qcom: sm8450: Add usb nodesVinod Koul1-0/+89
SM8450 features a single USB controller which connects to both HS and SS phy. Add the USB and the phy nodes for Qualcomm SM8450 SoC. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211216110813.658384-1-vkoul@kernel.org
2021-12-20Merge tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann4-32/+56
Samsung DTS ARM64 changes for v5.17 1. Add bindings for: Exynos USI, Samsung Galaxy A8 (2018) board, WinLink E850-96 board and WinLink vendor prefix. 2. Add pinctrl definitions used for Exynos850. 3. Minor fixes and improvements. 4. Convert serial on ExynosAutov9 to new hierarchy where serial is part of USI node. * tag 'samsung-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850 dt-bindings: arm: samsung: Document E850-96 board binding dt-bindings: Add vendor prefix for WinLink dt-bindings: arm: samsung: document jackpotlte board binding dt-bindings: soc: samsung: Fix I2C clocks order in USI binding example arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9 dt-bindings: soc: samsung: Add Exynos USI bindings arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7 Link: https://lore.kernel.org/r/20211220115530.30961-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'v5.16-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dtArnd Bergmann21-89/+549
mt8183: - add Acer Chromebook 314 - evb: add node to read thermisor from AUXIN0 - add several sku's for Lenovo IdeaPad Flex 3 Chromebook and ASUS Chromebook Detachable CM3 - update sensor mapping of the board temperature sensor - add some coresight nodes for CPU debugging - USB Type C connector description to all Chromebooks mt8192, mt8516: - smaller i2c related fixes mt8173: - enable backlight enable pin to all Chromebooks mt7986[a,b]: - add basic support * tag 'v5.16-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits) arm64: dts: mediatek: add pinctrl support for mt7986b arm64: dts: mediatek: add pinctrl support for mt7986a arm64: dts: mt8183: kukui: Add Type C node arm64: dts: mediatek: add basic mt7986 support dt-bindings: arm64: dts: mediatek: Add mt7986 series arm64: dts: mt8183: support coresight-cpu-debug for mt8183 arm64: dts: mediatek: mt8173-elm: Add backlight enable pin config arm64: dts: mediatek: mt8173-elm: Move pwm pinctrl to pwm0 node arm64: dts: mt8183-kukui: Update Tboard sensor mapping table arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo dt-bindings: arm64: dts: mediatek: Add sku22 for mt8183 kakadu board dt-bindings: arm64: dts: mediatek: Add more SKUs for mt8183 fennel board dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-cozmo arm64: dts: mt8183: Add kakadu sku22 arm64: dts: mt8183: Add more fennel SKUs arm64: dts: mt8183: Add kukui-jacuzzi-cozmo board arm64: dts: mt8183: jacuzzi: remove unused ddc-i2c-bus arm64: dts: mediatek: mt8183-evb: Add node for thermistor arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocks arm64: dts: mediatek: mt8192: fix i2c node names ... Link: https://lore.kernel.org/r/0d05e8b6-c56f-bad7-00c1-44682cedb38f@suse.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann51-151/+5811
i.MX arm64 device tree change for 5.17: - New SoC support: i.MX8 ULP. - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2, i.MX8 ULP EVK. - A series from Adam Ford to enable Camera and USB support for imx8mm-beacon device. - Add overlays for various serdes protocols on LS1028A QDS board using different PHY cards. - A series from Biwen Li to update LS1028A devices around RTC, flextimer and PWM support. - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M devices. - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet PHY and I2C1 pad configuration. - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3 dtsi for Librem5 devices. - Add cache descriptions for i.MX8 SoCs. - A series from Vladimir Oltean to update ls1028a-rdb device tree in order to share the DTS between Linux and U-Boot. - Random device addtion to various i.MX8 and LX2160A based devices. * tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits) arm64: dts: imx8mp-evk: configure multiple queues on eqos arm64: dts: ls1028a-qds: add overlays for various serdes protocols arm64: dts: ls1028a-qds: enable lpuart1 arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus arm64: dts: ls1028a-rdb: enable pwm0 arm64: dts: ls1028a: add flextimer based pwm nodes arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source arm64: dts: ls1028a: Add PCIe EP nodes arm64: dts: lx2162a-qds: add interrupt line for RTC node arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes arm64: dts: lx2160a-qds: Add mdio mux nodes arm64: dts: lx2160a: add optee-tz node arm64: dts: lx2160a-rdb: Add Inphi PHY node arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl arm64: dts: nitrogen8-som: correct network PHY reset arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property arm64: dts: imx8ulp: add power domain entry for usdhc ... Link: https://lore.kernel.org/r/20211218071427.26745-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'mvebu-dt64-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dtArnd Bergmann3-0/+157
mvebu dt64 for 5.17 (part 1) Enable more network hardware and gpios on CN9130-CRB Add new clock node needed by comphy on armada-37xx * tag 'mvebu-dt64-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: cn9130: enable CP0 GPIO controllers arm64: dts: marvell: cn9130: add GPIO and SPI aliases arm64: dts: marvell: armada-37xx: Add xtal clock to comphy node arm/arm64: dts: Add MV88E6393X to CN9130-CRB device tree arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRB Link: https://lore.kernel.org/r/878rwjm8vj.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dtArnd Bergmann19-9/+2556
Devicetree changes for TI K3 platforms for v5.17 merge window: * New Platforms: - J721s2 SoC, SoM and Common Processor Board support * New features: - CAN support on AM64 EVM and SK - TimeSync Router on AM64 * Fixes: - Correct d-cache-sets info on J7200 - Fix L2 cache-sets value for J721e/J7200/AM64 - Fixes for dtbs_check warnings wrt serdes_ln_ctrl node on J721e/J7200 - Disable McASP on IoT2050 board to fix dtbs_check warnings * tag 'ti-k3-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arch: arm64: ti: Add support J721S2 Common Processor Board arm64: dts: ti: Add initial support for J721S2 System on Module arm64: dts: ti: Add initial support for J721S2 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 dt-bindings: arm: ti: Add bindings for J721s2 SoC arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi level arm64: dts: ti: k3-am642-evm/sk: Add support for main domain mcan nodes in EVM and disable them on SK arm64: dts: ti: k3-am64-main: Add support for MCAN arm64: dts: ti: k3-j721e-common-proc-board: Add support for mcu and main mcan nodes arm64: dts: ti: k3-j721e: Add support for MCAN nodes arm64: dts: ti: am654-base-board/am65-iot2050-common: Disable mcan nodes arm64: dts: ti: k3-am65-mcu: Add Support for MCAN arm64: dts: ti: k3-am64-main: add timesync router node arm64: dts: ti: k3-j7200: Correct the d-cache-sets info arm64: dts: ti: k3-j721e: Fix the L2 cache sets arm64: dts: ti: k3-j7200: Fix the L2 cache sets arm64: dts: ti: k3-am642: Fix the L2 cache sets arm64: dts: ti: j721e-main: Fix 'dtbs_check' in serdes_ln_ctrl node arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node arm64: dts: ti: k3-j721e: correct cache-sets info Link: https://lore.kernel.org/r/20211217172806.10023-2-vigneshr@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'tegra-for-5.17-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann27-282/+1454
arm64: tegra: Device tree changes for v5.17-rc1 The vast majority of this contains various updates and cleanups to the Tegra device trees that will eventually help validate all of them using the dt-schema infrastructure. Another notable chunk of this contains additional Tegra234 support as well as support for the new Jetson AGX Orin Developer Kit. * tag 'tegra-for-5.17-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (47 commits) arm64: tegra: Add host1x hotflush reset on Tegra210 arm64: tegra: Hook up MMC and BPMP to memory controller arm64: tegra: Add memory controller on Tegra234 arm64: tegra: Add EMC general interrupt on Tegra194 arm64: tegra: Update SDMMC4 speeds for Tegra194 arm64: tegra: Add dma-coherent for Tegra194 VIC arm64: tegra: Rename Ethernet PHY nodes arm64: tegra: Remove unused only-1-8-v properties arm64: tegra: Sort Tegra210 XUSB clocks correctly arm64: tegra: Add missing TSEC properties on Tegra210 arm64: tegra: jetson-nano: Remove extra PLL power supplies for PCIe and XUSB arm64: tegra: smaug: Remove extra PLL power supplies for XUSB arm64: tegra: jetson-tx1: Remove extra PLL power supplies for PCIe and XUSB arm64: tegra: Rename GPIO hog nodes to match schema arm64: tegra: Remove unsupported regulator properties arm64: tegra: Rename TCU node to "serial" arm64: tegra: Remove undocumented Tegra194 PCIe "core_m" clock arm64: tegra: Drop unused properties for Tegra194 PCIe arm64: tegra: Fix Tegra194 HSP compatible string arm64: tegra: Drop unsupported nvidia,lpdr property ... Link: https://lore.kernel.org/r/20211217162253.1801077-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-20Merge tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann4-6/+6
i.MX fixes for 5.16, round 3: - Fix imx6qdl-wandboard Ethernet support by adding 'qca,clk-out-frequency' property. - Fix scl-gpios property typo in LX2160A device tree. * tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: lx2160a: fix scl-gpios property name ARM: dts: imx6qdl-wandboard: Fix Ethernet support soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211218052003.GA25102@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-17arm64: dts: marvell: cn9130: enable CP0 GPIO controllersRobert Marko1-0/+8
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in Armada 7k and 8k both are left disabled by the SoC DTSI. This first of all makes no sense as they are always present due to being SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2 pins for regulators and SD card support without enabling them first. So, enable both of them like Armada 7k and 8k do. Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-12-17arm64: dts: marvell: cn9130: add GPIO and SPI aliasesRobert Marko1-0/+7
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI controllers built-in. However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required aliases as both the Orion SPI driver and MVEBU GPIO drivers require the aliases to be present. So add the required aliases for GPIO and SPI controllers. Fixes: 6b8970bd8d7a ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support") Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-12-17arm64: dts: marvell: armada-37xx: Add xtal clock to comphy nodePali Rohár1-0/+2
Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the reference xtal clock. So add missing xtal clock source into comphy device tree node. If the property is not present, the driver defaults to 25 MHz xtal rate (which, as far as we know, is used by all the existing boards). Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-12-17arm/arm64: dts: Add MV88E6393X to CN9130-CRB device treeChris Packham1-0/+130
The CN9130-CRB boards have a MV88E6393X switch connected to eth0. Add the necessary dts nodes and properties for this. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-12-17arm/arm64: dts: Enable CP0 GPIOs for CN9130-CRBChris Packham1-0/+10
Enable the CP0 GPIO devices for the CN9130-CRB. This is needed for a number of the peripheral devices to function. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-12-17Merge tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann16-30/+468
Renesas ARM DT updates for v5.17 (take two) - Initial support for the R-Car S4-8 SoC on the Spider CPU and BreakOut boards, - MIPI DSI display support for the R-Car V3u SoC and the Falcon board stack, - Thermal and GPU support for the RZ/G2L SoC and the RZ/G2L SMARC EVK development board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.17-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Fix pin controller node names arm64: dts: renesas: rzg2l-smarc-som: Add vdd core regulator arm64: dts: renesas: r9a07g044: Add Mali-G31 GPU node arm64: dts: renesas: r9a07g044: Create thermal zone to support IPA arm64: dts: renesas: r9a07g044: Add TSU node arm64: dts: renesas: falcon-cpu: Add DSI display output arm64: dts: renesas: r8a779a0: Add DSI encoders arm64: dts: renesas: Add Renesas Spider boards support arm64: dts: renesas: Add Renesas R8A779F0 SoC support dt-bindings: clock: Add r8a779f0 CPG Core Clock Definitions dt-bindings: power: Add r8a779f0 SYSC power domain definitions arm64: dts: renesas: Fix thermal bindings Link: https://lore.kernel.org/r/cover.1639736718.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-17Merge tag 'sunxi-dt-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann11-132/+243
Our usual round of DT patches for the 5.17 merge window, with: - Introduction of the chassis-type property - I2C, SPDIF support for the Tanix TX6 - Memory frequency scaling for the A64 and H5 - Hantro G2 support for the H6 - New Board: Tanix TX6 Mini * tag 'sunxi-dt-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: Add Hantro G2 node arm64: dts: allwinner: h6: tanix-tx6: Enable bluetooth arm64: dts: allwinner: h6: tanix: Add MMC1 node arm64: dts: allwinner: h6: Add Tanix TX6 mini dts dt-bindings: arm: sunxi: Add Tanix TX6 mini arm64: dts: allwinner: h6: tanix-tx6: Split to DT and DTSI ARM: dts: sun8i: Adjust power key nodes arm64: dts: allwinner: a64: Update MBUS node ARM: dts: sunxi: h3/h5: Update MBUS node dt-bindings: arm: sunxi: Add H5 MBUS compatible dt-bindings: arm: sunxi: Expand MBUS binding dt-bindings: clock: sunxi: Export CLK_DRAM for devfreq dt-bindings: crypto: Add optional dma properties ARM: dts: sun8i: h3: beelink-x2: Add GPIO CEC node ARM: dts: sunxi: Add CEC clock to DW-HDMI arm64: dts: allwinner: a64: Add CEC clock to HDMI ARM: dts: sun8i: h3: beelink-x2: Sort nodes arm64: dts: allwinner: h6: tanix-tx6: Add I2C node arm64: dts: allwinner: h6: tanix-tx6: Add SPDIF arm64: dts: allwinner: add 'chassis-type' property Link: https://lore.kernel.org/r/ef385139-6fd4-42d2-9bfe-a4dda7ac76c9.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-17Merge tag 'sunxi-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixesArnd Bergmann1-1/+1
One patch to fix the GMAC PHY mode on the OrangePi Zero Plus * tag 'sunxi-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode Link: https://lore.kernel.org/r/e295f1f7-cd24-4a7a-ae83-aafb2a3263b6.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-17arm64: tegra: Add host1x hotflush reset on Tegra210Thierry Reding1-2/+2
Add the host1x memory client hotflush reset on Tegra210. Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-17arm64: dts: renesas: Fix pin controller node namesGeert Uytterhoeven2-2/+2
Align all pin controller node names with the expectations of the DT bindings in Documentation/devicetree/bindings/pinctrl/pinctrl.yaml. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/09a09c8ac9cb1a11b859c1ab9d9eae84cfefb1bb.1639666967.git.geert+renesas@glider.be
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.