aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14arm64: dts: renesas: falcon-cpu: Add DSI display outputKieran Bingham1-0/+79
Provide the display output using the sn65dsi86 MIPI DSI bridge. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20211130164311.2909616-3-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-14arm64: dts: renesas: r8a779a0: Add DSI encodersKieran Bingham1-0/+58
Provide the two MIPI DSI encoders on the V3U and connect them to the DU accordingly. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20211130164311.2909616-2-kieran.bingham+renesas@ideasonboard.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-14arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boardsAriel D'Alessandro4-0/+556
Introduce BSH SystemMaster (SMM) S2 board family, which consists of: iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards. Add support for iMX8MN BSH SMM S2 board: - 256 MiB DDR3 RAM - 512 MiB NAND - Megabit Ethernet PHY - Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0 - USB-OTG (peripheral mode) Add support for iMX8MN BSH SMM S2 PRO board: - 512 MiB DDR3 RAM - 8 GiB eMMC - Megabit Ethernet PHY - Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0 - USB-OTG (peripheral mode) Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' propertyFabio Estevam4-4/+0
The 'pm-ignore-notify' property is not a valid property and there is no documentation for it. Drop such invalid property. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: imx8ulp: add power domain entry for usdhcPeng Fan1-0/+3
Add power domain for USDHC node. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: imx8ulp: add scmi firmware nodePeng Fan1-0/+35
i.MX8ULP use scmi firmware based power domain and sensor support. So add the firmware node and the sram it uses. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: imx8mq-evk: link regulator to VPU domainAdam Ford1-0/+4
The SW1C regulator powers the VPU and the state isn't guaranteed to always be on. Link the VPU power-domain to the regulator to ensure it is turned on before using the power domain. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1088a: add snps incr burst type adjustment for usb1Li Yang1-0/+1
This property could fix the defect that external usb device always prints this error log --- 'reset SuperSpeed USB device number n using xhci_hcd' when system power on. Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1088a: Add reboot nodesLi Yang1-0/+12
ls1088a has a separate reset register block. Define it in dts and use it for reboot. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1028a-rdb: update copyrightVladimir Oltean1-1/+1
Company policy requires that copyright is updated when a file is touched. Keeping the copyright change separate to reduce the noise in other patches. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1028a-rdb: add aliases for the Ethernet portsVladimir Oltean1-0/+6
These are used by U-Boot, and are required for keeping the device trees in sync. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1028a-rdb: add an alias for the FlexSPI controllerVladimir Oltean1-0/+1
This is used by U-Boot and is required for keeping the device trees in sync. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14arm64: dts: ls1028a-rdb: sort nodes alphabetically by labelVladimir Oltean1-42/+42
In preparation for this board's device tree synchronization with U-Boot, we must find a common node ordering pattern. Alphabetical sounds about right. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-14Merge tag 'amlogic-arm64-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dtArnd Bergmann5-59/+162
Amlogic ARM64 DT changes for v5.17: - Add missing cec nodes for Odroid-C4 & HC4 - Fix thermal-zones indent for G12/SM1 SoCs dtsi - Fix GPU OPP table node name for G12/SM1 SoCs dtsi - Fix SPI NOR Flash node name for Odroid-N2/N2+ - Fixes for GXBB Wetek boards: - Fix HDMI supply - Add missing gpio bindings include - Switch to new LED bindings - P241 additions: - Add VCC 5v regulator - Add sound nodes * tag 'amlogic-arm64-dt-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: p241: add sound support arm64: dts: meson: p241: add vcc_5v regulator arm64: dts: meson-gxbb-wetek: use updated LED bindings arm64: dts: meson-gxbb-wetek: fix missing GPIO binding arm64: dts: meson-gxbb-wetek: fix HDMI in early boot arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+ arm64: dts: amlogic: meson-g12: Fix GPU operating point table node name arm64: dts: amlogic: meson-g12: Fix thermal-zones indent arm64: dts: meson-sm1-odroid: add cec nodes Link: https://lore.kernel.org/r/f47b9b95-6cde-d2f8-eb36-78777d449920@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13arm64: dts: qcom: sm7225-fairphone-fp4: Enable ADSP, CDSP & MPSSLuca Weiss1-0/+31
Enable the remoteprocs found on the SoC and add a qcom,rmtfs-mem node. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-9-luca.weiss@fairphone.com
2021-12-14Merge tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann9-24/+232
Improvements on a number of boards: - helios64: hdd-power, pcie, 2.5GbE nic - spi for rk356x and on the Quartz-A board - headphone, bluetooth support on Rock Pi4 And some misc soc improvements: - missing dsi compatible on px30 - pwm pinctrl name on rk356x * tag 'v5.17-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards arm64: dts: rockchip: Add missing secondary compatible for PX30 DSI arm64: dts: rockchip: Add spi1 pins on Quartz64 A arm64: dts: rockchip: Add spi nodes on rk356x arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356x arm64: dts: rockchip: Enable HDD power on helios64 arm64: dts: rockchip: add variables for pcie completion to helios64 arm64: dts: rockchip: define usb hub and 2.5GbE nic on helios64 arm64: dts: rockchip: add interrupt and headphone-detection for Rock Pi4's audio codec Link: https://lore.kernel.org/r/3637342.7akbv5NDAT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13arm64: dts: qcom: sm6350: Add CDSP nodesLuca Weiss1-0/+122
Add the required nodes for booting the CDSP on sm6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-8-luca.weiss@fairphone.com
2021-12-13arm64: dts: qcom: sm6350: Add ADSP nodesLuca Weiss1-0/+91
Add the required nodes for booting the ADSP on sm6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-6-luca.weiss@fairphone.com
2021-12-13arm64: dts: qcom: sm6350: Add MPSS nodesLuca Weiss1-0/+66
Add the required nodes for booting the MPSS on sm6350. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082208.21492-4-luca.weiss@fairphone.com
2021-12-13arm64: dts: qcom: sm6350: Fix validation errorsLuca Weiss1-8/+8
Sort clocks and interrupts as specified in the docs and remove the stray property #power-domain-cells from aoss_qmp to solve dtbs_check validation errors. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213082614.22651-11-luca.weiss@fairphone.com
2021-12-13Merge tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux into arm/dtArnd Bergmann9-29/+1536
Apple SoC DT updates for 5.17: - Separate DTs for all t8103 platforms - Add i2c and cd321x nodes - Bindings for apple,wdt - PMGR bindings and DT updates to instantiate it - WiFi MAC address DT handling This also includes the MAINTAINERS change for the PMGR driver itself, to avoid merge issues; the driver will be sent in a different pull. Manual fixups: Added i2c power domain references to the PMGR DT commit, since a prior commit added the i2c nodes. * tag 'asahi-soc-dt-5.17' of https://github.com/AsahiLinux/linux: arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address arm64: dts: apple: t8103: Add UART2 arm64: dts: apple: t8103: Add PMGR nodes dt-bindings: arm: apple: Add apple,pmgr binding dt-bindings: power: Add apple,pmgr-pwrstate binding MAINTAINERS: Add PMGR power state files to ARM/APPLE MACHINE dt-bindings: watchdog: Add Apple Watchdog dt-bindings: interrupt-controller: apple,aic: Add power-domains property dt-bindings: pinctrl: apple,pinctrl: Add power-domains property dt-bindings: iommu: apple,dart: Add power-domains property dt-bindings: i2c: apple,i2c: Add power-domains property arm64: dts: apple: t8103: Add cd321x nodes arm64: dts: apple: t8103: Add i2c nodes arm64: dts: apple: Add missing M1 (t8103) devices dt-bindings: arm: apple: Add iMac (24-inch 2021) to Apple bindings arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: dts: apple: change ethernet0 device type to ethernet Link: https://lore.kernel.org/r/e18b476c-7b1f-de73-53a2-0e21fb5cd283@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13arch: arm64: ti: Add support J721S2 Common Processor BoardAswath Govindraju2-0/+423
The EVM architecture for J721S2 is similar to that of J721E and J7200. It is as follows, +------------------------------------------------------+ | +-------------------------------------------+ | | | | | | | Add-on Card 1 Options | | | | | | | +-------------------------------------------+ | | | | | | +-------------------+ | | | | | | | SOM | | | +--------------+ | | | | | | | | | | | Add-on | +-------------------+ | | | Card 2 | | Power Supply | | Options | | | | | | | | | +--------------+ | <--- +------------------------------------------------------+ Common Processor Board Common Processor board is the baseboard that contains most of the actual connectors, power supply etc. The System on Module (SoM) is plugged on to the common processor baord. Therefore, add support for peripherals brought out in the common processor board. Common Processor Board: https://www.ti.com/tool/J721EXCPXEVM Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211207080904.14324-6-a-govindraju@ti.com
2021-12-13arm64: dts: ti: Add initial support for J721S2 System on ModuleAswath Govindraju1-0/+175
A System on Module (SoM) contains the SoC, PMIC, DDR and basic high speed components necessary for functionality. Therefore, add support for the components present on the SoM. SoM: https://www.ti.com/lit/zip/sprr439 Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211207080904.14324-5-a-govindraju@ti.com
2021-12-13arm64: dts: ti: Add initial support for J721S2 SoCAswath Govindraju3-0/+1428
The J721S2 SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration in automotive ADAS applications and industrial applications requiring AI at the network edge. This SoC extends the Jacinto 7 family of SoCs with focus on lowering system costs and power while providing interfaces, memory architecture and compute performance for single and multi-sensor applications. Some highlights of this SoC are: * Dual Cortex-A72s in a single cluster, three clusters of lockstep capable dual Cortex-R5F MCUs, Deep-learning Matrix Multiply Accelerator(MMA), C7x floating point Vector DSP. * 3D GPU: Automotive grade IMG BXS-4-64 * Vision Processing Accelerator (VPAC) with image signal processor and Depth and Motion Processing Accelerator (DMPAC) * Two CSI2.0 4L RX plus one eDP/DP, two DSI Tx, and one DPI interface. * Two Ethernet ports with RGMII support. * Single 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role device subsystems, * Up to 20 MCANs, 5 McASP, eMMC and SD, OSPI/HyperBus memory controller, QSPI, I3C and I2C, eCAP/eQEP, eHRPWM, MLB among other peripherals. * Hardware accelerator blocks containing AES/DES/SHA/MD5 called SA2UL management. * Chips and Media Wave521CL H.264/H.265 encode/decode engine See J721S2 Technical Reference Manual (SPRUJ28 – NOVEMBER 2021) for further details: http://www.ti.com/lit/pdf/spruj28 Introduce basic support for the J721S2 SoC. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211207080904.14324-4-a-govindraju@ti.com
2021-12-13arm64: dts: qcom: Add device tree for Samsung J5 2015 (samsung-j5)Julian Ribbeck2-0/+210
Samsung J5 2015 is a MSM8916 based Smartphone. It is similar to some of the other MSM8916 devices, especially the Samsung ones. With this patch initial support for the following is added: - eMMC/SD card - Buttons - USB (although no suiting MUIC driver currently) - UART (untested for lack of equipment) - WiFi/Bluetooth (WCNSS) It is worth noting that Samsung J5 with MSM8916 exists in different generations (e.g Samsung J5 2015 and Samsung J5 2016) which each have different models (e.g. samsung-j5nlte, samsung-j5xnlte, etc). This patch is only regarding the 2015 generation, but should work with all of it's models, as far as we could test. Co-developed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Julian Ribbeck <julian.ribbeck@gmx.de> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211116200734.73920-1-julian.ribbeck@gmx.de
2021-12-13arm64: dts: ti: iot2050: Disable mcasp nodes at dtsi levelJayesh Choudhary1-0/+12
Disable mcasp nodes 0-2 because several required properties are not present in the dtsi file as they are board specific. These nodes can be enabled via an overlay whenever required. Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/20211117053806.10095-1-j-choudhary@ti.com
2021-12-13Merge tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixesArnd Bergmann5-4/+4
Fixes for some board-level issues (regulators, mmc, poweroff, audio) * tag 'v5.16-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: fix poweroff on helios64 arm64: dts: rockchip: fix audio-supply for Rock Pi 4 arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge Link: https://lore.kernel.org/r/3072346.MIvVl8DfR5@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann1-2/+0
i.MX fixes for 5.16, round 2: - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header - Remove interconnect property from i.MX8MQ LCDIF device to fix the regression that LCDIF driver stops probe, because interconnect provider driver (imx-bus) hasn't been fully working. - Fix soc-imx driver to register SoC device only on i.MX platform. * tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux into arm/fixesArnd Bergmann2-1/+5
Asahi SoC DT/binding fixes for 5.16. Just some minor DT fixups we found after things got merged. * tag 'asahi-soc-fixes-5.16' of https://github.com/AsahiLinux/linux: arm64: dts: apple: add #interrupt-cells property to pinctrl nodes dt-bindings: i2c: apple,i2c: allow multiple compatibles arm64: dts: apple: change ethernet0 device type to ethernet Link: https://lore.kernel.org/r/cc9a1a67-3b2d-ae9f-5733-859111eb78c1@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge branch 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixesArnd Bergmann1-15/+15
* 'v5.16/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: meson: remove COMMON_CLK arm64: meson: fix dts for JetHub D1 Link: https://lore.kernel.org/r/ab9f066f-480b-84b2-248e-953f2f2b5f59@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann2-2/+4
i.MX fixes for 5.16: - A series from Vladimir Oltean to update SJA1105 switch RGMII delay for a few boards, so that kernel doesn't warn on the legacy bindings. - Remove redundant interrupt declaration for gpio-keys on board ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15 and later. * tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13arm64: dts: exynos: convert serial_0 to USI on ExynosAutov9Chanho Park2-8/+32
According to USI v2 driver change[1], serial_0 node should be converted to use the USI node hierarchy. syscon_peric0 will be used as a syscon node to control the USI00_USI_SW_CONF register. This also changes the serial node name from uart@ to serial@. [1]: https://lore.kernel.org/linux-samsung-soc/20211204195757.8600-2-semen.protsenko@linaro.org/ Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20211208091853.8557-1-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-12arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boardsJagan Teki3-6/+15
This patch fixes the Bluetooth on ROCK Pi 4 boards. ROCK Pi 4 boards has BCM4345C5 and now it is supported on Mainline Linux, brcm,bcm43438-bt still working but observed the BT Audio issues with latest test. So, use the BCM4345C5 compatible and its associated properties like clock-names as lpo and max-speed. Attach vbat and vddio supply rails as well. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20211112142359.320798-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-12arm64: dts: rockchip: Add missing secondary compatible for PX30 DSIDavid Heidelberg1-1/+1
Add second DSI compatible to comply with DT schema validation comming in the second patch. Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20211211233818.88482-1-david@ixit.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-12arm64: dts: apple: t8103: Add watchdog nodeSven Peter1-0/+8
Add the watchdog node which also enables reboot support on the t8103. Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-12-12arm64: dts: apple: t8103: Add apple,min-state to DCP PMGR nodesHector Martin1-0/+2
This is required for DCP to boot successfully; it seems if power gating is allowed, they do not wake up properly. Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-12-11arm64: dts: rockchip: Add spi1 pins on Quartz64 ANicolas Frattaroli1-0/+5
The Quartz64 Model A has the SPI pins broken out on its pin header. The actual pins being used though are not the m0 variant, but the m1 variant, which also lacks the cs1 pin. This commit overrides pinctrl-0 accordingly for this board. spi1 is intentionally left disabled, as anyone wishing to add SPI devices needs to edit the dts anyway, and the pins are more useful as GPIOs for the rest of the users. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20211127141910.12649-4-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-11arm64: dts: rockchip: Add spi nodes on rk356xNicolas Frattaroli1-0/+64
This adds the four spi nodes (spi0, spi1, spi2, spi3) to the rk356x dtsi. These are from the downstream device tree, though I have double-checked that their interrupts and DMA numbers are correct. I have also tested spi1 with an SPI device. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20211127141910.12649-3-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-11arm64: dts: rockchip: Change pwm pinctrl-name to "default" on rk356xSascha Hauer1-16/+16
The pinctrl state "active" is neither documented nor used by the PWM driver. Rename it to "default" Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20211208120312.3300390-1-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-12-10Merge tag 'pci-v5.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-3/+4
Pull PCI fixes from Bjorn Helgaas: - Revert emulation of Marvell Armada A3720 expansion ROM because it doesn't work as expected (Marek Behún) - Assert PERST# in Apple M1 driver to fix initialization when booting from bootloaders using PCIe, such as U-Boot (Marc Zyngier) - Describe PERST# as active low in Apple T8103 DT and update driver to match (Marc Zyngier) * tag 'pci-v5.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: apple: Fix PERST# polarity arm64: dts: apple: t8103: Mark PCIe PERST# polarity active low in DT PCI: apple: Follow the PCIe specifications when resetting the port Revert "PCI: aardvark: Fix support for PCI_ROM_ADDRESS1 on emulated bridge"
2021-12-08arm64: dts: imx8mp: add mac address for EQOSJoakim Zhang1-0/+6
Add mac address in efuse, so that EQOS driver can parse it from nvmem cell. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for FECJoakim Zhang4-4/+0
Remove unused "nvmem_macaddr_swap" property for FEC, there is no info in both dt-binding and driver, so it's safe to remove it. Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8mp-evk: disable CLKOUT clock for ENET PHYJoakim Zhang1-0/+2
According to commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock"), diable CLKOUT clock for FEC PHY to save power on i.MX8MP EVK board. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8m: configure FEC PHY VDDIO voltageJoakim Zhang3-0/+16
As commit 2f664823a470 ("net: phy: at803x: add device tree binding") described, configure FEC PHY VDDIO voltage according to board design. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8m: disable smart eee for FEC PHYJoakim Zhang3-0/+3
As commit 390b4cad8148 ("net: phy: at803x: add support for configuring SmartEEE") described, disable PHY smart eee by default. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8mp-evk: add hardware reset for EQOS PHYJoakim Zhang1-0/+3
As commit 798a1807ab13 ("arm64: dts: imx8mp-evk: Improve the Ethernet PHY description") described, add hardware reset for EQOS PHY. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-08arm64: dts: imx8mn-evk: add hardware reset for FEC PHYJoakim Zhang1-0/+2
Add hardware reset for FEC PHY. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-07arm64: dts: apple: t8103: Mark PCIe PERST# polarity active low in DTMarc Zyngier1-3/+4
As the name indicates, PERST# is active low. Fix the DT description to match the HW behaviour. Fixes: ff2a8d91d80c ("arm64: apple: Add PCIe node") Link: https://lore.kernel.org/r/20211123180636.80558-3-maz@kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2021-12-07arm64: dts: renesas: Add Renesas Spider boards supportYoshihiro Shimoda3-0/+60
Initial support for the Renesas Spider CPU and BreakOut boards. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Takehito Nakamura <takehito.nakamura.nx@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-14-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-07arm64: dts: renesas: Add Renesas R8A779F0 SoC supportYoshihiro Shimoda1-0/+121
Add initial support for the Renesas R8A779F0 (R-Car S4-8) SoC. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.