aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-11-17arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire mastersSrinivas Kandagatla1-0/+157
SM8250 has TX and RX macros with SoundWire Controllers to attach with codecs like WCD938x. Add these nodes for sm8250 mtp audio use case. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211006164712.16078-2-srinivas.kandagatla@linaro.org
2021-11-17arm64: dts: mt8183-kukui: Update Tboard sensor mapping tableBen Tseng1-54/+54
According to auxadc change the readback value from raw data to Vsense. Update the tboard table that temperature map to Vsense. pull-up voltage: 1800 mv pull-up resistor: 75K Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc ) Signed-off-by: Ben Tseng <ben.tseng@mediatek.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20211103033044.2777-1-ben.tseng@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufoAngeloGioacchino Del Regno1-0/+2
In order to use CMDQ commands on these two IPs, we need to declare the appropriate mediatek,gce-client-reg for them. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211104135254.580257-1-angelogioacchino.delregno@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mt8183: Add kakadu sku22Hsin-Yi Wang2-0/+20
Kakadu sku22 is using mediatek,mt8183_mt6358_ts3a227_rt1015p audio codec Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20211110063118.3412564-4-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mt8183: Add more fennel SKUsHsin-Yi Wang7-1/+55
Add fennel sku7 and fennel14 sku2, which use different audio codec than previous fennel/fennel14 boards. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20211110063118.3412564-3-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mt8183: Add kukui-jacuzzi-cozmo boardHsin-Yi Wang2-0/+37
Cozmo is known as Acer Chromebook 314 (CB314-2H/CB314-2HT) Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20211110063118.3412564-2-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mt8183: jacuzzi: remove unused ddc-i2c-busHsin-Yi Wang1-1/+0
EDID is read from bridge, so the ddc-i2c-bus is unused. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20211110063118.3412564-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mediatek: mt8183-evb: Add node for thermistorFabien Parent1-0/+8
Add node to be able to read the temperature for the thermistor connected to AUXIN0. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20211110192631.4182485-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mediatek: mt8516: remove 2 invalid i2c clocksFabien Parent1-21/+6
The two clocks "main-source" and "main-sel" are not present in the driver and not defined in the binding documentation. Remove them as they are not used and not described in the documentation. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20211110193520.488-1-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: mediatek: mt8192: fix i2c node namesFabien Parent1-10/+10
Fix the i2c node names to be compliant to the YAML schema. The I2C node name should match the following pattern: "^i2c@[0-9a-f]+$". Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20211110194959.20611-4-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-17arm64: dts: allwinner: orangepi-zero-plus: fix PHY modeRobert Marko1-1/+1
Orange Pi Zero Plus uses a Realtek RTL8211E RGMII Gigabit PHY, but its currently set to plain RGMII mode meaning that it doesn't introduce delays. With this setup, TX packets are completely lost and changing the mode to RGMII-ID so the PHY will add delays internally fixes the issue. Fixes: a7affb13b271 ("arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus") Acked-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Ron Goossens <rgoossens@gmail.com> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211117140222.43692-1-robert.marko@sartura.hr
2021-11-16arm64: dts: allwinner: h6: tanix-tx6: Add SPDIFJernej Skrabec1-0/+22
Tanix TX6 board has SPDIF connector in form of 3.5 mm jack. Add support for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211115201112.452696-1-jernej.skrabec@gmail.com
2021-11-15arm64: dts: broadcom: bcm4908: add DT for Netgear RAXE500Rafał Miłecki2-0/+51
It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known how it's wired up). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-11-15arm64: dts: mt8183: change rpmsg property nameTinghan Shen1-1/+1
The the rpmsg property name is changed to "mediatek," to sync with the vendor name defined in vendor-prefixes.yaml. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20210924033935.2127-7-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-11-15arm64: dts: meson-gxbb-wetek: use updated LED bindingsChristian Hewitt1-2/+5
Update the dts to use the newer style of LED bindings. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211012052522.30873-4-christianshewitt@gmail.com
2021-11-15arm64: dts: meson-gxbb-wetek: fix missing GPIO bindingChristian Hewitt1-0/+1
The absence of this binding appears to be harmless in Linux but it breaks Ethernet support in mainline u-boot. So add the binding (which is present in all other u-boot supported GXBB device-trees). Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211012052522.30873-3-christianshewitt@gmail.com
2021-11-15arm64: dts: meson-gxbb-wetek: fix HDMI in early bootChristian Hewitt1-0/+2
Mark the VDDIO_AO18 regulator always-on and set hdmi-supply for the hdmi_tx node to ensure HDMI is powered in the early stages of boot. Fixes: fb72c03e0e32 ("ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211012052522.30873-2-christianshewitt@gmail.com
2021-11-15arm64: dts: amlogic: Fix SPI NOR flash node name for ODROID N2/N2+Alexander Stein1-1/+1
Fix the schema warning: "spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'" from jedec,spi-nor.yaml Fixes: a084eaf3096c ("arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211026182813.900775-3-alexander.stein@mailbox.org
2021-11-15arm64: dts: amlogic: meson-g12: Fix GPU operating point table node nameAlexander Stein1-1/+1
Starting with commit 94274f20f6bf ("dt-bindings: opp: Convert to DT schema") the opp node name has a mandatory pattern. This change fixes the dtbs_check warning: gpu-opp-table: $nodename:0: 'gpu-opp-table' does not match '^opp-table(-[a-z0-9]+)?$' Put the 'gpu' part at the end to match the pattern. Fixes: 916a0edc43f0 ("arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211026182813.900775-2-alexander.stein@mailbox.org
2021-11-15arm64: dts: amlogic: meson-g12: Fix thermal-zones indentAlexander Stein1-55/+55
This node is currently at /soc/thermal-zones, but the later introduced bindings in commit 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones") put this at /thermal-zones. Fix dtb_check warning by moving the thermal-zones node to / Signed-off-by: Alexander Stein <alexander.stein@mailbox.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211026182813.900775-1-alexander.stein@mailbox.org
2021-11-15arm64: dts: meson-sm1-odroid: add cec nodesDmitry Shmidt1-0/+14
Enable CEC in same way it is done for other meson odroid devices Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20211007180130.805401-1-dimitrysh@google.com
2021-11-15arm64: dts: renesas: r9a07g044: Add SCI[0-1] nodesLad Prabhakar1-0/+30
Add SCI[0-1] nodes to r9a07g044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211109123110.8543-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15arm64: dts: renesas: rzg2l-smarc: Enable SCIF2 on carrier boardLad Prabhakar1-0/+28
SCIF2 interface is available on PMOD1 connector (CN7) on carrier board, This patch adds pinmux and scif2 node to carrier board dtsi file. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211103195600.23964-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15arm64: dts: renesas: r9a07g044: Add SCIF[1-4] nodesLad Prabhakar1-0/+72
Add SCIF[1-4] nodes to r9a07g044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20211103195600.23964-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-15arm64: dts: allwinner: add 'chassis-type' propertyArnaud Ferraris4-0/+5
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly. This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on Allwinner ARM64 processors. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211016102025.23346-2-arnaud.ferraris@collabora.com
2021-11-03Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds361-5375/+37775
Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...
2021-10-27Merge tag 'asahi-soc-dt-5.16-v2' of https://github.com/AsahiLinux/linux into arm/dtArnd Bergmann2-0/+230
Apple SoC DT updates for 5.16. Adds pinctrl and PCIe nodes. * tag 'asahi-soc-dt-5.16-v2' of https://github.com/AsahiLinux/linux: arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes Link: https://lore.kernel.org/r/6d41b29c-dafa-9b0e-d9ff-fe01eb6dce82@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-27arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC addressMarc Zyngier1-0/+23
At the moment, all the Minis running Linux have the same MAC address (00:10:18:00:00:00), which is a bit annoying. Expose the PCI node corresponding to the Ethernet device, and declare a 'local-mac-address' property. The bootloader will update it (m1n1 already has the required feature). And if it doesn't, then the default value is already present in the DT. This relies on forcing the bus number for each port so that the endpoints connected to them are correctly numbered (and keeps dtc quiet). Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: dts: apple: t8103: Add root port interrupt routingMarc Zyngier1-3/+30
Add the interrupt-map properties that are required for INTx signalling. Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: dts: apple: t8103: Add PCIe DARTsMarc Zyngier1-0/+30
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka DARTs). Add the three instances that deal with the internal PCIe ports and route each port's traffic through its DART. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: apple: Add PCIe nodeMark Kettenis1-0/+63
Add node corresponding to the apcie,t8103 node in the Apple device tree for the Mac mini (M1, 2020). Power domain references and DART (IOMMU) references are left out at the moment and will be added once the appropriate bindings have been settled upon. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-27arm64: apple: Add pinctrl nodesMark Kettenis1-0/+87
Add pinctrl nodes corresponding to the gpio,t8101 nodes in the Apple device tree for the Mac mini (M1, 2020). Clock references are left out at the moment and will be added once the appropriate bindings have been settled upon. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210520171310.772-3-mark.kettenis@xs4all.nl Signed-off-by: Hector Martin <marcan@marcan.st>
2021-10-26Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann115-2256/+5729
Qualcomm ARM64 DTS additional patches for v5.16 The RPM and RPMh sleep stats are introduced on a number of platforms, to aid the enablement of entering low power mode. The MSM8916 support receives some polishing touches, followed by introduction of the necessary pieces to use the DeviceTree on 32-bit variants of the MSM8916 platform, in particular to boot the secondary CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition is introduced. The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support. MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5 gained a description of its LCD panel. The Trogdor device on SC7180 gained support for a second source eDP brigde, while SC7280 gains PCIe support and the newly introduced Herobrine device. Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour of the newly introduced support for specifying the compatible directly on the reserved-memory node. The SM7225 platform is introduced, as a derrivative of SM6350, initial support for the PM6350 PMIC and based on this the Fairphone 4 is introduced. The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs to be baked into a single boot.img that can be booted on both devices. As the GDSC driver has been extended to properly describe the relationship between MMCX and MDSS_GDSC, the now deprecated mmcx regulator is removed from SM8250. SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was also added for SM8150 and the SA8155p ADP got a couple of remoteprocs enabled. Additionally a number of DT validation issues was corrected across the various platforms and devices. * tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits) Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: sdm630: Add disabled Venus support arm64: dts: qcom: pm660l: Remove board-specific WLED configuration arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann3-0/+7
Samsung DTS ARM64 changes for v5.16, part two 1. Add chassis-type property. 2. Add ChipID node to ExynosAutov9 DTSI. * tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add chipid node for exynosautov9 SoC arm64: dts: exynos: add 'chassis-type' property Link: https://lore.kernel.org/r/20211026094709.75692-4-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update register-bit-led nodes 'reg' and node namesRob Herring1-8/+19
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms. The 'reg' entry is the LED control register address. With this, the node name can be updated to use a generic node name, 'led', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixesArnd Bergmann1-1/+2
Qualcomm ARM64 DTS one more fix for 5.15 This reverts a clock change in the Qualcomm RB5 devicetree which in some combinations of firmware and configuration causes the device to crash during boot. Data on an adjacent platform indicates that this is probably not be the root cause of the problem, but this resolves the regression seen on RB5 and will allow the SM8250 platform to boot v5.15. * tag 'qcom-arm64-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target" Link: https://lore.kernel.org/r/20211025201213.1145348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26arm64: dts: exynos: add chipid node for exynosautov9 SoCChanho Park1-0/+5
It can be compatible with exynos850's chipid. The SoC has eight chipid registers that can be used for OTP. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-25Revert "arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target"Amit Pundir1-1/+2
This reverts commit 001ce9785c0674d913531345e86222c965fc8bf4. This upstream commit broke AOSP (post Android 12 merge) build on RB5. The device either silently crashes into USB crash mode after android boot animation or we see a blank blue screen with following dpu errors in dmesg: [ T444] hw recovery is not complete for ctl:3 [ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22 [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 [ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout [ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout [ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110 Fixes: 001ce9785c06 ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
2021-10-24Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"Bjorn Andersson1-51/+0
I didn't notice that I already had applied this patch and while this builds fine one copy is enough. This reverts commit 22efef1ca05d2c96730060750d00205c49b8b39c. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-10-24arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller nodeBhupesh Sharma1-3/+2
'iface_clk' clock is not used by the qcom, bam_dma driver, so remove the same from 'ipq6018' dts. This is a preparatory patch for subsequent patch in this series which converts the qcom_bam_dma device-tree binding into YAML format. Without this change, 'make dtbs_check' leads to the following error: $ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk'] is too long Fix the same. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211013105541.68045-4-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' propertyBhupesh Sharma1-1/+0
'qcom,config-pipe-trust-reg' property doesn't seem to be used by the qcom, bam_dma driver, so remove the same from 'ipq6018' dts. This is a preparatory patch for subsequent patch in this series which converts the qcom_bam_dma device-tree binding into YAML format. Without this change, 'make dtbs_check' leads to the following error: $ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match any of the regexes: 'pinctrl-[0-9]+' Fix the same. Cc: Thara Gopinath <thara.gopinath@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: sm8350: Add CPU topology and idle-statesBjorn Andersson1-0/+141
Add CPU topology and define the idle states for the silver and gold cores as well as the cluster. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://lore.kernel.org/r/20210825221600.1498939-1-bjorn.andersson@linaro.org
2021-10-24arm64: dts: qcom: Drop unneeded extra device-specific includesStephan Gerhold8-1969/+1937
For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp were added as separate .dts and .dtsi files where the first only contains the model name and the latter contains most of the actual definitions. Perhaps this was done with the expectation that there would be other devices also making use of exactly the same. However, this has not been the case until now and it also seems unlikely in the future. Having the extra .dtsi only clutters the file list and provides little benefit. Move the contents of the .dtsi into the .dts file to make this consistent with most other devices that simply define everything in the .dts. There are no functional changes introduced by this patch: The compiled ".dtb"s are completely identical. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916: Drop standalone smem nodeStephan Gerhold1-10/+5
SMEM can now be described directly in the reserved-memory. This is mainly meant for newer SoCs where there is only one SMEM region. However, even on older SoCs like MSM8916 there is clearly one main SMEM region (described by "memory-region") that holds the smem_header and one special extra region used only for data of the RPM ("qcom,rpm-msg-ram"). The definition in reserved-memory also looks cleaner for older SoCs, so make use of that in MSM8916 as well. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-2-stephan@gerhold.net
2021-10-24arm64: dts: qcom: Fix node name of rpm-msg-ram device nodesStephan Gerhold7-7/+7
According to the new DT schema for qcom,rpm-msg-ram the node name should be sram@. memory@ is reserved for definition of physical RAM (usable by Linux). This fixes the following dtbs_check error on various device trees: memory@60000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add sensorsJ.R. Divya Antony1-0/+51
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer, Add support for it. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-3-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add SDCardJ.R. Divya Antony1-0/+33
Enable SDHCI (SD Card) Storage. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-2-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add touchscreenJ.R. Divya Antony1-0/+41
Add support for touchscreen in this device. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211012112735.2765-1-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops nodeDavid Heidelberg1-1/+0
This property doesn't exist in Linux kernel. Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices") Reviewed-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011200138.115688-1-david@ixit.cz
2021-10-24arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clockVladimir Zapolskiy1-1/+1
The change corrects the described bus clock of the QCE. Fixes: 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.") Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.