aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-10-24arm64: dts: qcom: msm8996: Add device tree entries to support crypto engineVladimir Zapolskiy1-0/+22
The change adds description of Qualcomm crypto engine controller and BAM associated with it. The change is inspired by commit 3e482859f1ef ("dts: qcom: sdm845: Add dt entries to support crypto engine.") While performance of cryptographic algorithms executed on QCE is lower than e.g. ones tinkered for ARM NEON, the offloaded execution would make sense: # cryptsetup benchmark | grep aes aes-cbc 128b 71.0 MiB/s 71.9 MiB/s aes-cbc 256b 62.4 MiB/s 62.4 MiB/s aes-xts 256b 70.7 MiB/s 70.8 MiB/s aes-xts 512b 62.0 MiB/s 63.3 MiB/s Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Cc: Thara Gopinath <thara.gopinath@linaro.org> Acked-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
2021-10-24arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C busKrzysztof Kozlowski1-1/+1
Although the early NXP NCI NFC bindings required the clock-frequency property, it was never used by the driver and it is actually a property of I2C bus, not I2C slave. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211011073143.32645-1-krzysztof.kozlowski@canonical.com
2021-10-24arm64: dts: qcom: msm8916-asus-z00l: Add sensorsJ.R. Divya Antony1-0/+51
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer. Add support for it. Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211010033750.15204-1-d.antony.jr@gmail.com
2021-10-24arm64: dts: qcom: sdm630: Add disabled Venus supportAngeloGioacchino Del Regno1-0/+51
Add support for the Venus video decoder/encoder but leave it disabled by default; it is expected to eventually get enabled in each machine specific DT, where required. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008102119.268869-3-angelogioacchino.delregno@collabora.com
2021-10-24arm64: dts: qcom: pm660l: Remove board-specific WLED configurationMarijn Suijten1-7/+0
This string- and electrical configuration depend on the board and panel, and should hence not be defined generically for every user of pm660l. SoMainline will pick this configuration again when enabling WLED on the Sony Nile platform. Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-14-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-toneMarijn Suijten2-1/+1
The number of WLED strings used by a certain platform depend on the panel connected to that board and may not be the same for every user of pmi8994. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-13-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-stringsMarijn Suijten1-2/+0
The driver now sets an appropriate default for WLED4 (and WLED5) just like WLED3 making this linear array from 0-3 redundant. In addition the driver is now able to parse arrays of variable length solving the "all four strings *have to* be defined" comment. Besides the driver will now warn when both properties are specified to prevent ambiguity: the length of the array is enough to imply a set number of strings. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED nodeMarijn Suijten1-1/+1
The property is named "qcom,external-pfet", as found by dt_binding_check: 'qcom,eternal-pfet' does not match any of the regexes Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
2021-10-24arm64: dts: qcom: sc7280: Add HerobrineMatthias Kaehlcke3-0/+1427
Herobrine is a Chrome OS board/platform based on the QCA SC7280. Add a .dtsi for the platform parts and a .dts for the board specific bits. Currently the .dtsi has everything except the compatible strings, things will likely get shuffled around in the future as we learn more about the differences between boards. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007140854.1.I70615769f27bbaf7e480419d0f660f802b1fea43@changeid
2021-10-24arm64: dts: qcom: sc7280: Add PCIe nodes for IDP boardPrasad Malisetty3-0/+66
Enable PCIe controller and PHY for sc7280 IDP board. Add specific NVMe GPIO entries for SKU1 and SKU2 support. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1633628923-25047-4-git-send-email-pmaliset@codeaurora.org
2021-10-24arm64: dts: qcom: sc7280: Add PCIe and PHY related nodesPrasad Malisetty1-0/+118
Add PCIe controller and PHY nodes for sc7280 SOC. Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1633628923-25047-3-git-send-email-pmaliset@codeaurora.org
2021-10-24arm64: dts: qcom: msm8996: xiaomi-gemini: Enable JDI LCD panelRaffaele Tranquillini1-0/+33
This enables the JDI FHD_R63452 LCD panel used on Xiaomi Mi 5 Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210925113808.524749-1-raffaele.tranquillini@gmail.com
2021-10-24arm64: dts: qcom: Fix 'interrupt-map' parent address cellsRob Herring2-12/+12
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells' size of the parent interrupt controller (the GIC) is not accounted for. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
2021-10-24arm64: dts: qcom: ipq8074-hk01: Add dummy supply for QMP USB3 PHYShawn Guo1-0/+6
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS for this platform, add a dummy regulator as the supply to QMP USB3 PHY, so that dtbs_check stops complaining the missing supplies. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-10-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodesShawn Guo1-10/+36
IPQ8074 PCIe PHY nodes are broken in the many ways: - '#address-cells', '#size-cells' and 'ranges' are missing. - Child phy/lane node is missing, and the child properties like '#phy-cells' and 'clocks' are mistakenly put into parent node. - The clocks properties for parent node are missing. Fix them to get the nodes comply with the bindings schema. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8998-clamshell: Add missing vdda suppliesShawn Guo1-0/+2
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add them to fix the dtbs_check warnings below. phy@1da7000: 'vdda-phy-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml phy@1da7000: 'vdda-pll-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop reg-names from QMP PHY nodesShawn Guo3-3/+0
The 'reg-names' is not a supported/used property. Drop it from QMP PHY nodes to fix dtbs_check warnings like below. phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo12-29/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Correct QMP PHY child node nameShawn Guo8-25/+25
Many child nodes of QMP PHY are named without following bindings schema and causing dtbs_check warnings like below. phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$' arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml Correct them to fix the warnings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child nodeShawn Guo4-8/+5
'#clock-cells' is a required property of QMP PHY child node, not itself. Move it to fix the dtbs_check warnings. There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because child nodes already have the property. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: sc7280: Add 200MHz in qspi_opp_tableRajesh Patil1-0/+5
Add 200MHz OPP in qspi_opp_table Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
2021-10-24arm64: dts: qcom: pmk8350: Make RTC disabled by default; enable on sc7280-idpDouglas Anderson3-0/+9
The RTC on the pmk8350 is not useful on all boards. Some boards may not provide backup power to the PMIC but might have another RTC on the board that does have backup power. In this case it's better to not use the RTC on the PMIC. At the moment, the only boards that includes this PMIC are sc7280-idp and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but sc7280-idp2 has a Chrome OS EC on it and this is intended to provide the RTC for the AP. Let's do what we normally do for hardware that's not used by all boards and set it to a default status of "disabled" and then enable it on the boards that need it. NOTE: for sc7280-idp it's _possible_ we might also want to add `allow-set-time;`. That could be the subject of a future patch if it is indeed true. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Satya Priya <skakit@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [bjorn: Enable the RTC on the MTP as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
2021-10-24arm64: dts: qcom: ipq8074: Add QUP5 I2C nodeChukun Pan1-0/+15
Add node to support the QUP5 I2C controller inside of IPQ8074. It is exactly the same as QUP2 controllers. Some routers like ZTE MF269 use this bus. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
2021-10-23arm64: dts: qcom: qrb5165-rb5: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Robotics Board RB5. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-2-amit.pundir@linaro.org
2021-10-23arm64: dts: qcom: sdm845-db845c: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Dragonboard 845c. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-1-amit.pundir@linaro.org
2021-10-23arm64: dts: qcom: sdm845: Move gpio.h inclusion to SoC DTSIKonrad Dybcio7-6/+1
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Add size/address-cells to dsi[01]Konrad Dybcio4-9/+6
Add the aforementioned properties in the SoC DTSI so that everybody doesn't have to copy that into their device DTs, effectively reducing code duplication. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-5-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Don't disable MDP explicitlyKonrad Dybcio7-26/+0
DPU/MDSS is borderline useless without MDP, so disabling both of them makes little sense. With this change, enabling mdss will be enough. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Disable Adreno, modem and Venus by defaultKonrad Dybcio7-0/+69
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot. Re-enable these remote processors on boards that didn't previously explicitly disable them. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-By: Steev Klimaszewski <steev@kali.org> [bjorn: Added missing changes to db845c and lenovo-yoga-c630 to the patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-3-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: sdm845: Add XO clock to SDHCIKonrad Dybcio1-2/+3
Add the missing XO clock to the SDHCI controller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-2-konrad.dybcio@somainline.org
2021-10-23arm64: dts: qcom: msm8916: Add CPU ACC and SAW/SPMStephan Gerhold1-0/+56
Add the device tree nodes necessary for SMP bring-up and cpuidle without PSCI on ARM32. The hardware is typically controlled by the PSCI implementation in the TrustZone firmware and is therefore marked as status = "reserved" by default (from the device tree specification): "Indicates that the device is operational, but should not be used. Typically this is used for devices that are controlled by another software component, such as platform firmware." Since this is part of the MSM8916 SoC it should be added to msm8916.dtsi but in practice these nodes should only get enabled via an extra include on ARM32. This is necessary for some devices with signed firmware which is missing both ARM64 and PSCI support and can therefore only boot ARM32 kernels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-13-stephan@gerhold.net
2021-10-23arm64: dts: qcom: msm8916-samsung-serranove: Add NFCStephan Gerhold1-0/+50
The LTE version of the S4 Mini VE has a NXP PN547, which is supported by the nxp-nci-i2c driver in mainline. It seems to detect NFC tags using "nfctool" just fine, although more testing is difficult given there seem to be very few useful applications making use of the Linux NFC subsystem. :( Note that for some reason Samsung decided to connect the I2C pins to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging with i2c-gpio. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-7-stephan@gerhold.net
2021-10-23arm64: dts: qcom: msm8916-samsung-serranove: Add rt5033 batteryStephan Gerhold1-0/+23
Like the Samsung Galaxy A3/A5, the S4 Mini VE uses a Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some regulators. For now, only add the fuel gauge/battery device to the device tree, so we can check the remaining battery percentage. The other RT5033 drivers need some more work first before they can be used properly. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-6-stephan@gerhold.net
2021-10-23arm64: dts: qcom: msm8916-samsung-serranove: Add IMUStephan Gerhold1-0/+23
Add the STMicroelectronics LSM6DS3 IMU that is used in the S4 Mini VE to the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-5-stephan@gerhold.net
2021-10-23arm64: dts: qcom: msm8916-samsung-serranove: Add touch keyStephan Gerhold1-0/+87
Add the CORERIVER TC360 touch key together with the two necessary fixed regulators for it. Note that for some reason Samsung decided to connect this to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging using i2c-gpio. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-4-stephan@gerhold.net
2021-10-23arm64: dts: qcom: msm8916-samsung-serranove: Add touch screenStephan Gerhold1-0/+50
Like msm8916-samsung-a3u-eur, the S4 Mini VE uses a Zinitix BT541 touch screen. Add it together with the necessary fixed-regulator to the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-3-stephan@gerhold.net
2021-10-23arm64: dts: qcom: Add device tree for Samsung Galaxy S4 Mini Value EditionStephan Gerhold2-0/+302
The Samsung Galaxy S4 Mini Value Edition is an updated version of the original S4 Mini based on MSM8916. It is similar to the other Samsung devices based on MSM8916 with only a few minor differences. The device tree contains initial support for the S4 Mini Value Edition with: - UART - eMMC/SD card (needs quirk for some reason) - Buttons - Vibrator - WiFi/Bluetooth (WCNSS) - USB Unfortunately, the S4 Mini VE was released with outdated 32-bit only firmware and never received any update from Samsung. Since the 32-bit TrustZone firmware is signed there seems to be no way currently to actually boot this device tree on arm64 Linux at the moment. :( However, it is possible to use this device tree by compiling an ARM32 kernel instead. The device tree can be easily built on ARM32 with an #include and it works really well there. To avoid confusion for others it is still better to add this device tree on arm64. Otherwise it's easy to forget to update this one when making some changes that affect all MSM8916 devices. Maybe someone finds a way to boot ARM64 Linux on this device at some point. In this case I expect that this device tree can be simply used as-is. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-2-stephan@gerhold.net
2021-10-23arm64: dts: qcom: sm7225: Add device tree for Fairphone 4Luca Weiss2-0/+321
Add device tree for the Fairphone 4 smartphone which is based on Snapdragon 750G (sm7225) which is basically sm6350. Currently supported are UART, physical buttons (power & volume), screen (based on simple-framebuffer set up by the bootloader), regulators and USB. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-12-luca@z3ntu.xyz
2021-10-23arm64: dts: qcom: Add SM7225 device treeLuca Weiss1-0/+16
The Snapdragon 750G (sm7225) is software-wise very similar to Snapdragon 690 (sm6350) with minor differences in clock speeds and as added here, it uses the Kryo 570 instead of Kryo 560. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-11-luca@z3ntu.xyz
2021-10-23arm64: dts: qcom: sm6350: add debug uartLuca Weiss1-0/+31
Add the necessary nodes for the debug uart on SM6350. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-8-luca@z3ntu.xyz
2021-10-23arm64: dts: qcom: Add PM6350 PMICLuca Weiss1-0/+54
PM6350 is used in SM6350 and provides similar functionality to other Qualcomm PMICs. Add the pon node with power & volume key and the gpios. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-7-luca@z3ntu.xyz
2021-10-23arm64: dts: qcom: sa8155p-adp: Enable remoteproc capabilitiesBhupesh Sharma1-0/+10
Enable two of the remoteprocs found on SA8155p platform - 'audio and compute'. Also specify firmware path for them. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928140929.2549459-3-bhupesh.sharma@linaro.org
2021-10-23arm64: dts: qcom: sm8150: Add fastrpc nodesBhupesh Sharma1-0/+119
Add fastrpc nodes for sDSP, cDSP, and aDSP. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928140929.2549459-2-bhupesh.sharma@linaro.org
2021-10-23arm64: dts: qcom: sm8350: Add fastrpc nodesOla Jeppsson1-0/+118
Add fastrpc nodes for sDSP, cDSP, and aDSP. Signed-off-by: Ola Jeppsson <ola@snap.com> Acked-by: Heinrich Fink <hfink@snap.com> Acked-by: Olivier Schonken <oschonken@snapchat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018085017.1549494-1-ola@snap.com
2021-10-20arm64: dts: qcom: sdm845-oneplus: enable second wifi channelCaleb Connolly1-0/+7
Like the c630, the OnePlus 6 is also capable of using both antenna channels for 2.4 and 5ghz wifi, however unlike the c630 only the first channel is used for bluetooth. Signed-off-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020163557.291803-1-caleb@connolly.tech
2021-10-20Merge tag 'sunxi-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixesArnd Bergmann1-1/+1
Two patches to fix the GMAC PHY mode on some boards. * tag 'sunxi-fixes-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode arm64: dts: allwinner: h5: NanoPI Neo 2: Fix ethernet node Link: https://lore.kernel.org/r/d4c41c71-f1ff-4464-a26f-1bfd4b52fd78.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'imx-fixes-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann2-6/+10
i.MX fixes for 5.15, round 4: - A series from Frieder Schrempf to fix i.MX8MM Kontron N801x board on various aspects, voltage settings, GPIO polarity, SPI clock frequency and Ethernet PHY type. * tag 'imx-fixes-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY arm64: dts: imx8mm-kontron: Fix CAN SPI clock frequency arm64: dts: imx8mm-kontron: Fix polarity of reg_rst_eth2 arm64: dts: imx8mm-kontron: Set lower limit of VDD_SNVS to 800 mV arm64: dts: imx8mm-kontron: Make sure SOC and DRAM supply voltages are correct Link: https://lore.kernel.org/r/20211018000958.GC25810@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'v5.16-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann11-27/+487
Idle-cooling information for rk3399, rk356x additions (tsadc resets, i2s, spdif, pwm), rk3368 powerdomains, fixes to make gpio subnodes compliant with the new pinctrl yaml binding and addition of the chassis-type for the non-sbc devices. * tag 'v5.16-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add idle cooling devices to rk3399 arm64: dts: rockchip: fix resets in tsadc node for rk356x arm64: dts: rockchip: Add analog audio on Quartz64 arm64: dts: rockchip: Add i2s1 on rk356x arm64: dts: rockchip: change gpio nodenames arm64: dts: rockchip: add 'chassis-type' property arm64: dts: rockchip: add powerdomains to rk3368 dt-bindings: arm: rockchip: add rk3368 compatible string to pmu.yaml arm64: dts: rockchip: enable spdif on Quartz64 A arm64: dts: rockchip: add spdif node to rk356x arm64: dts: rockchip: add pwm nodes for rk3568 Link: https://lore.kernel.org/r/4536780.s7XYDJ6uuW@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'sunxi-dt-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann12-20/+71
Our usual round of DT patches for the 5.16 merge window, with: - DT schema fixes - I2S support for the R40 - HDMI support for the pinetab - devfreq support for the A64 GPU * tag 'sunxi-dt-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: interconnect: sunxi: Add R40 MBUS compatible arm64: dts: allwinner: NanoPi R1S H5: Add generic compatible string for I2C EEPROM arm64: dts: allwinner: pinetab: Add HDMI support arm64: dts: allwinner: a64: Add GPU opp table ARM: dts: sun8i: r40: Add I2S nodes dt-bindings: sound: sun4i-i2s: add Allwinner R40 I2S compatible arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC arm64: dts: allwinner: teres-i: Add missing reg arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning arm64: dts: allwinner: a100: Fix thermal zone node name arm64: dts: allwinner: h6: Fix de3 parent clocks ordering arm64: dts: allwinner: h5: Fix GPU thermal zone node name ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible ARM: dts: tbs711: Fix touchscreen compatible ARM: dts: sunxi: Fix the SPI NOR node names ARM: dts: sunxi: Fix OPPs node name ARM: dts: sunxi: Fix OPP arrays ARM: dts: sunxi: Rename gpio pinctrl names ARM: dts: sunxi: Rename power-supply names dt-bindings: sunxi: Add Allwinner A80 PRCM Binding ... Link: https://lore.kernel.org/r/5cad5ac6-187d-4d36-9437-5821c6e8242d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann29-190/+1374
i.MX arm64 device tree changes for 5.16: - New board support: LX2160A based BlueBox3, S32G2 EVB and RDB2 boards. - Quite some updates on imx8mq-librem5 board: delay the startup of the SDIO, add power sequencing for M.2 cards, add wifi regulator, add panel reset GPIO, fix led_r and led_g pinctrl, etc. - Fix the SPI chipselect polarity for a couple of i.MX8MM boards. - Add GPU nodes for i.MX8MM 2D and 3D core. - Add VPU and DISP blk-ctrl devices for i.MX8MM. - A series from Michael Walle to LS1028A device trees and add GPU support. - Random and small updates on various boards. * tag 'imx-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits) arm64: dts: imx8mm-kontron: Add support for ultra high speed modes on SD card arm64: dts: imx8mm-venice-gw7901.dts: disable pgc_gpumix arm64: dts: imx8mq-librem5: set debounce interval of volume buttons to 50ms arm64: dts: imx8mq-librem5: Limit the max sdio frequency arm64: dts: imx8mq-librem5: add power sequencing for M.2 cards arm64: dts: imx8mq-librem5: delay the startup of the SDIO arm64: dts: imx8mq-librem5: wire up the wifi regulator arm64: dts: imx8mq-librem5: Fix led_r and led_g pinctrl assignments arm64: dts: imx8mq-librem5: add reset gpio to mantix panel description arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY arm64: dts: imx8mm: add DISP blk-ctrl arm64: dts: imx8mm: add VPU blk-ctrl arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core arm64: dts: imx8mm: put USB controllers into power-domains arm64: dts: imx8mm: add GPC node arm64: dts: ls1028a: mark internal links between Felix and ENETC as capable of flow control arm64: dts: freescale: Fix 'interrupt-map' parent address cells arm64: dts: ls1028a: use phy-mode instead of phy-connection-type arm64: dts: ls1028a: move PHY nodes to MDIO controller arm64: dts: ls1028a: disable usb controller by default ... Link: https://lore.kernel.org/r/20211016140138.1603-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.