aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2022-09-13arm64: dts: qcom: sc7280: Add herobrine-villager-r1Jimmy Chen3-2/+17
This adds sc7280-herobrine-villager-r1.dts for villager device tree files. Herobrine-r1 is exactly the same as -r0 except that it uses a different audio solution (it uses the same one as the CRD). Signed-off-by: Jimmy Chen <jinghung.chen3@hotmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/SG2PR03MB500667CFE3F5F59585F8BA77CC949@SG2PR03MB5006.apcprd03.prod.outlook.com
2022-09-13arm64: dts: ti: Add support for AM62A7-SKVignesh Raghavendra2-0/+225
AM62A StarterKit (SK) board is a low cost, small form factor board designed for TI’s AM62A7 SoC. It supports the following interfaces: * 2 GB LPDDR4 RAM * x1 Gigabit Ethernet interface * x1 HDMI Port with audio * x1 Headphone Jack * x1 USB2.0 Hub with two Type A host and x1 USB Type-C DRP Port * x1 UHS-1 capable µSD card slot * M.2 SDIO Wifi + UART slot * 1Gb OSPI NAND flash * x4 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * 40-pin User Expansion Connector * 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO) * 20-pin header for Programmable Realtime Unit (PRU) IO pins * 40-pin CSI header Add basic support for AM62A7-SK. Schematics: https://www.ti.com/lit/zip/sprr459 Co-developed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Devarsh Thakkar <devarsht@ti.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220901141328.899100-6-vigneshr@ti.com
2022-09-13arm64: dts: ti: Introduce AM62A7 family of SoCsVignesh Raghavendra5-0/+616
The AM62A SoC belongs to the K3 Multicore SoC architecture platform that can run edge AI applications with Video/Vision processing. This provides advanced system integration with high security support to enable a broad set of applications in industrial/automotive markets such as, driver monitoring, machine vision, smart camera, eMirror, front camera, robotics, and building automation. Some highlights of AM62A SoC are: * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. Dual/Single core variants are provided in the same package to allow HW compatible designs. * One Device manager Cortex-R5F for system power and resource management, and one Cortex-R5F for Functional Safety or general-purpose usage. * One AI accelerator (up to 2 TOPS), using one C7x256V DSP w/Matrix Multiplier accelerator (MMA) for Deep Learning usage. * VPAC3L(Vision Pre-processing Accelerator), providing 12-bit ISP up to 315MPixel/s RGB+IR support, and Noise Filter for improved integrated imaging and vision image processing. * H.264/H.265 Video Encode/Decode. + Motion JPEG encode * Display support, providing 24-bit RBG parallel interface up to 200MHz pixel clock support for 2K display resolution. * Integrated Giga-bit Ethernet switch supporting up to a total of two external ports (TSN capable). * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, GPMC for NAND/FPGA connection, OSPI memory controller, 3x McASP for audio, 1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. * Dedicated Centralized Hardware Security Module with support for secure boot, debug security and crypto acceleration and trusted execution environment * One 32 bit DDR Subsystem that supports LPDDR4, DDR4 memory types. * Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, enabling battery powered system design. More details about the SoCs can be found in the Technical Reference Manual: https://www.ti.com/lit/zip/spruj16 Co-developed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Devarsh Thakkar <devarsht@ti.com> Link: https://lore.kernel.org/r/20220901141328.899100-5-vigneshr@ti.com
2022-09-13arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu portTim Harvey1-2/+2
The CPU uplink port on the KSZ9477 is P5 not P6 - fix this. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-13arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarityTim Harvey1-2/+1
The CAN STBY poarlity is active-low. Specify it as such by removing the 'enable-active-high' property and updating the gpio property. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-12Merge tag 'samsung-dt64-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann2-0/+111
Samsung DTS ARM64 changes for v6.0 1. Add binding headers for several Exynos850 and ExynosAutov9 clocks. 2. ExynosAutov9: Add FSYS clock controller nodes. 3. ExynosAutov9: Document serial compatible (used in DTS). 4. Exynos850: Add Audio, IS, MFC clock controllers. Add IOMMU nodes. * tag 'samsung-dt64-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: serial: samsung: add exynosautov9-uart compatible arm64: dts: exynos: Add SysMMU nodes for Exynos850 arm64: dts: exynos: Add CMU_AUD, CMU_IS and CMU_MFCMSCL for Exynos850 arm64: dts: exynosautov9: add fsys0/1 clock DT nodes dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 Link: https://lore.kernel.org/r/20220909150849.820523-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-12Merge tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixesArnd Bergmann9-8/+20
Drop some not-specified properties, fix phy-supply properties, fix edp clock on Gru, fix usb port on BPI-R2-Pro, fix license typo, fix wlan-wake-pin on Gru-Bob and lower the sd-card speed on Quartz64-B * tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10 arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro arm64: dts: rockchip: Fix typo in lisense text for PX30.Core arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob arm64: dts: rockchip: Lower sd speed on quartz64-b Link: https://lore.kernel.org/r/2645885.mvXUDI8C0e@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-12Merge tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann17-8/+3703
New boards the Anberic RG353P and RG503, Radxa Rock4c+ (variant with different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610. New components of the rk356x (Video encoder/decoder, pcie, CSI dphy). New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b (pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger) Usage of the new-ish bclk special handling for audio on rk3399. * tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: use BCLK to GPIO switch on rk3399 arm64: dts: rockchip: Add Hantro encoder node to rk356x arm64: dts: rockchip: Add VPU support for RK3568/RK3566 arm64: dts: rockchip: Enable PCIe controller on rock3a arm64: dts: rockchip: add rtc to rock3a arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b arm64: dts: rockchip: add Anbernic RG353P and RG503 dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503 dt-bindings: vendor-prefixes: add Anbernic arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro arm64: dts: rockchip: add LEDs for ROCK 4C+ arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+ arm64: dts: rockchip: add rk817 chg to Odroid Go Advance arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro arm64: dts: rockchip: rk3399: Radxa ROCK 4C+ arm64: dts: rockchip: Add RK3399-T OPP table dt-bindings: arm: rockchip: Document Radxa ROCK 4C+ arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro dt-bindings: arm: rockchip: Add PinePhone Pro bindings arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610 ... Link: https://lore.kernel.org/r/5600929.DvuYhMxLoT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-12arm64: dts: tqma8mqml: Include phy-imx8-pcie.h headerFabio Estevam2-1/+1
imx8mm-tqma8mqml.dtsi has PCIe support, so it should include <dt-bindings/phy/phy-imx8-pcie.h>. Otherwise, there are build errors when this SoM dtsi is included on customers' carrier boards. While at it, remove the PCI header from imx8mm-tqma8mqml-mba8mx.dts, which is now unneeded. Fixes: 1d84283101fc ("arm64: dts: tqma8mqml: add PCIe support") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-12arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarmAlexander Stein1-0/+6
Although the RTC is on the module, the RTC_EVENT# signal is connected on the mainboard. Already set by bootloader, but make it explicit in Linux as well. Fixes: 418d1d840e42 ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-10arm64: dts: rockchip: use BCLK to GPIO switch on rk3399Judy Hsiao2-1/+34
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch adjusts the device tree to allow BCLK to switch to GPIO func before LRCLK output, and switch back during LRCLK is output. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10arm64: dts: rockchip: Add Hantro encoder node to rk356xNicolas Frattaroli1-0/+20
The RK3566 and RK3568 come with a dedicated Hantro instance solely for encoding. This patch adds a node for this to the device tree, along with a node for its MMU. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10arm64: dts: rockchip: Add VPU support for RK3568/RK3566Piotr Oniszczuk1-0/+20
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8 video formats. This patch enables RK356x video decoder in RK356x device-tree include. Tested on [1] with FFmpeg v4l2_request code taken from [2] with MPEG2, H.642 and VP8 samples with results [3]. [1] https://github.com/warpme/minimyth2 [2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch [3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Link: https://lore.kernel.org/r/20220214212955.1178947-2-piotr.oniszczuk@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10arm64: dts: rockchip: Enable PCIe controller on rock3aChukun Pan1-0/+34
Add the nodes to enable the PCIe controller on the Radxa ROCK3 Model A board. Run test with the MT7921 pcie wireless card. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10arm64: dts: rockchip: add rtc to rock3aChukun Pan1-0/+23
Add devicetree node for hym8563 rtc to Radxa ROCK3 Model A board. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/r/20220726023046.5876-1-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-10arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-bNicolas Frattaroli1-0/+34
This adds the regulator node to the quartz64-b device tree, and enables the PCIe 2 controller and combphy for it. Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com> Link: https://lore.kernel.org/r/20220718033145.792657-1-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add Anbernic RG353P and RG503Chris Morgan4-0/+1014
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices from Anbernic. Both devices have: - 2 SDMMC slots. - A Realtek rtl8821cs WiFi/Bluetooth adapter. - A mini HDMI port. - A USB C host port and a USB C otg port (currently only working as device). - Multiple GPIO buttons and a single ADC button. - Dual analog joysticks controlled via a GPIO mux. - A headphone jack with amplified stereo speakers via a SGM4865 amp. - A PWM based vibrator for force feedback. The RG353P has: - 2GB LPDDR4 RAM. - A 32GB eMMC. - A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c controlled touchscreen (touchscreen is a Hynitron CST340). The RG503 has: - 1GB LPDDR4 RAM. - A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung with part number ams495qa04. Data for this panel is provided via the DSI interface, however commands are sent via a 9-bit 3-wire SPI interface. The MISO pin of SPI3 of the SOC is wired to the input of the panel, so it must be bitbanged. This devicetree enables the following hardware: - HDMI (plus audio). - Analog audio, including speakers. - All buttons. - All SDMMC/eMMC/SDIO controllers. - The ADC joysticks (note a pending patch is required to use them). - WiFi/Bluetooth (note out of tree drivers are required). - The PWM based vibrator motor. The following hardware is not enabled: - The display panels (drivers are being written and there are issues with the upstream DSI and VOP2 subsystems). - Battery (driver pending). - Touchscreen on the RG353P (note the i2c2 bus is enabled for it). Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: Add regulator suffix to BPI-R2-ProFrank Wunderlich1-6/+6
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as discussed on Mailinglist Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add LEDs for ROCK 4C+FUKAUMI Naoki1-0/+33
add support for user LEDs on Radxa ROCK 4C+ board. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-2-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+FUKAUMI Naoki1-0/+21
only user_led2 (blue) is supported. user_led1 (green) is not connected to any gpio so it cannot be controlled. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: rockchip: add rk817 chg to Odroid Go AdvanceChris Morgan1-0/+26
Add the new rk817 charger driver to the Odroid Go Advance. Create a monitored battery node as well for the charger to use. All values from monitored battery are gathered from the BSP kernel for the Odroid Go Advance provided by HardKernel. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-09arm64: dts: ti: k3-am625-sk: Add epwm nodesGeorgi Vlaev1-0/+12
Add epwm nodes and mark them disabled, as they're not currently in use. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220531205229.198011-3-g-vlaev@ti.com
2022-09-09arm64: dts: ti: k3-am62-main: Add epwm nodesGeorgi Vlaev1-0/+33
Add the compatible DT nodes for all EPWM instances present in AM62 SoC. There is a total of 3 EPWM modules available, sharing the same K3 IP as in AM64 SoC. This also adds a required "ti,am62-epwm-tbclk" clock provider node for the EPWM time-base clock. Signed-off-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20220531205229.198011-2-g-vlaev@ti.com
2022-09-09Merge tag 'renesas-fixes-for-v6.0-tag1' into renesas-arm-dt-for-v6.1Geert Uytterhoeven1-1/+1
Renesas fixes for v6.0 - Fix the serial console on the Renesas White Hawk development board.
2022-09-08arm64: dts: qcom: sa8155p-adp: Remove unused properties from eth nodeBhupesh Sharma1-3/+0
The 'snps,ptp-ref-clk-rate' and 'snps,ptp-req-clk-rate' properties are not supported by the stmmac driver currently, so remove them from the sa8155p-adp ethernet node as well. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220907204153.2039776-1-bhupesh.sharma@linaro.org
2022-09-08arm64: dts: qcom: sc7280: correct CPU BWMON unit addressKrzysztof Kozlowski1-1/+1
Correct CPU BWMON unit address to match the "reg" property. Reported-by: Stephen Boyd <swboyd@chromium.org> Fixes: b2f3eac1b77c ("arm64: dts: qcom: sc7280: Add cpu and llcc BWMON") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908085830.39141-1-krzysztof.kozlowski@linaro.org
2022-09-08arm64: dts: allwinner: beelink-gs1: Enable GPU OPPClément Péron1-0/+1
Enable GPU OPP table for Beelink GS1. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-6-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add GPU OPP tableClément Péron1-0/+87
Add an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6. The voltage range is set with minimal voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-4-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: h6: Add cooling map for GPUClément Péron1-2/+49
Add a simple cooling map for the GPU. This cooling map come from the vendor kernel 4.9 with a 2°C hysteresis added. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220906153034.153321-3-peron.clem@gmail.com
2022-09-08arm64: dts: allwinner: a100: Add I2C DMA requestsSamuel Holland1-0/+12
The I2C controllers in the A100 SoC are all connected to the DMA engine. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-4-samuel@sholland.org
2022-09-08arm64: dts: allwinner: a100: Add device node for DMA controllerYangtao Li1-0/+12
The A100 SoC has a DMA controller that supports 8 DMA channels to and from various peripherals. Add a device node for it. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220830020824.62288-3-samuel@sholland.org
2022-09-08Merge tag 'amlogic-arm64-dt-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dtArnd Bergmann8-336/+513
Amlogic ARM64 DT changes for v6.1: - add Bindings & DT for Beelink GT1 Ultimate - Remove invalid 'enable-active-low' on SM1 & G12A boards - add Bindings & DT for the new JetHub D1p * tag 'amlogic-arm64-dt-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: add support for Beelink GT1 Ultimate dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding arm64: dts: meson-sm1-sei610: Remove 'enable-active-low' arm64: dts: meson-g12a: Remove 'enable-active-low' dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110) arm64: dts: meson-axg: add support for JetHub D1p (j110) Link: https://lore.kernel.org/r/d0079686-40ae-58b2-e58b-c8dc6361d7f0@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-06arm64: dts: qcom: msm8916-samsung-serranove: Add magnetometerJakob Hauser1-0/+9
Add magnetometer Yamaha YAS537 to the DeviceTree of samsung-serranove. The YAS537 variant was recently added to the Yamaha YAS magnetometers driver [1]. In the DeviceTree of samsung-serranove for the Android kernel, there is unfortunately no information on interrupts or pinctrl [2]. In the Android kernel driver for magnetometer Yamaha YAS537, there is a device-specific matrix to correct an ellipsoid shape of the measure values into a sphere shape [3]. This could be converted and applied to a mount-matrix. However, the current state of the mainline Yamaha YAS537 driver needs post-process calibration in userspace anyway, as it lacks a formula to center the measure values around zero. The correction of the ellipsoid into a sphere can be done in the post-process calibration as well. A mount-matrix is needed nonetheless. When putting samsung-serranove flat on a table in portrait orientation heading north, the Yamaha YAS537 magnetometer axes natively point X+ to north, Y+ to east and Z+ into the ground, which corresponds to a common way to define the Earth's magnetic field coordinate system [4]. According to the IIO definition, it should be Y+ to north, X+ to east and Z+ upwards [5], which corresponds to a common device coordinate system and eases sensor fusing. [1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/iio/magnetometer/yamaha-yas530.c?id=65f79b501030678393eae0ae03d60a8151fbef55 [2] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-eur-r03.dtsi#L318-L321 [3] https://github.com/msm8916-mainline/android_kernel_qcom_msm8916/blob/GT-I9195I/drivers/iio/magnetometer/yas_mag_drv-yas537.c#L105-L106 [4] https://en.wikipedia.org/wiki/Earth%27s_magnetic_field#Characteristics [5] https://github.com/torvalds/linux/blob/v5.19/Documentation/devicetree/bindings/iio/mount-matrix.txt#L93-L126 Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220904214935.31032-1-jahau@rocketmail.com
2022-09-06arm64: dts: qcom: sc8280xp-pmics: Remove reg entry & use correct node name for pmc8280c_lpg nodeBhupesh Sharma1-2/+1
Commit eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") dropped PWM reg declaration for pm8350c pwm(s), but there is a leftover 'reg' entry inside the lpg/pwm node in sc8280xp dts file. Remove the same. While at it, also remove the unused unit address in the node label. Also, since dt-bindings expect LPG/PWM node name to be "pwm", use correct node name as well, to fix the following error reported by 'make dtbs_check': 'lpg' does not match any of the regexes Fixes: eeca7d46217c ("arm64: dts: qcom: pm8350c: Drop PWM reg declaration") Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220905070240.1634997-1-bhupesh.sharma@linaro.org
2022-09-06arm64: dts: qcom: sm7225-fairphone-fp4: Add pm7250b PMICLuca Weiss1-0/+67
The PM7250B is primarily used for charger and fuel gauge on Fairphone 4 but also has some thermal zones that we can configure already. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220902111055.106814-3-luca.weiss@fairphone.com
2022-09-06arm64: dts: qcom: Add pm7250b PMICLuca Weiss1-0/+149
PM7250B is a PMIC primarily used for charging and fuel gauge but also has some of the standard functionality like temp-alarm, adc, etc. Add the .dtsi with some of the functionality added. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220902111055.106814-2-luca.weiss@fairphone.com
2022-09-05arm64: dts: qcom: fix syscon node namesJohan Hovold7-7/+7
Some recent changes that added new syscon nodes used misspelled node names. Fixes: 86d7c9460e2c arm64: dts: qcom: sm8150: split TCSR halt regs out of mutex Fixes: 0da603387225 arm64: dts: qcom: sdm630: split TCSR halt regs out of mutex Fixes: 8a8531e69b2d arm64: dts: qcom: sdm845: split TCSR halt regs out of mutex Fixes: d9a2214d6ba5 arm64: dts: qcom: sc7280: split TCSR halt regs out of mutex Fixes: ce1ac53c7faa arm64: dts: qcom: sc7180: split TCSR halt regs out of mutex Fixes: fc10cfa38580 arm64: dts: qcom: msm8998: split TCSR halt regs out of mutex Fixes: 100ce2205924 arm64: dts: qcom: msm8996: split TCSR halt regs out of mutex Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220905091602.20364-1-johan+linaro@kernel.org
2022-09-05arm64: dts: qcom: sc8280xp: mark USB controllers as wakeup-sourcesJohan Hovold1-0/+4
The primary and secondary USB controllers can be used to wake the system from suspend so mark them accordingly. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-by: Steev Klimaszewski <steev@kali.org> #Lenovo Thinkpad X13s Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220902081652.12631-1-johan+linaro@kernel.org
2022-09-05arm64: dts: qcom: sc7280: Add device tree for herobrine evokerSheng-Liang Pan2-0/+334
Add a basic device tree for the herobrine evoker board. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220902160845.v5.2.I7dd7a79c4cc5fe91c3feb004473feb3b34b7b2d8@changeid
2022-09-05arm64: dts: qcom: sc7280: Add cpu and llcc BWMONRajendra Nayak1-0/+76
Add cpu and llcc BWMON nodes and their corresponding OPP tables for sc7280 SoC. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220902043511.17130-5-quic_rjendra@quicinc.com
2022-09-06arm64: dts: imx8mm-verdin: extend pmic voltagesPhilippe Schenker1-5/+5
Currently, we limited the voltages from the PMIC very strictly. This causes an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. Extend the ranges to min/max values of the SoC operating ranges (table 10) in the datasheet. Detailed explanation as follows: BUCK2: - As already described above, the SKU with the consumer-grade chip needs a voltage of at least 1.00V. 1.05V is chosen now as this is listed as the maximum. Both industrial and consumer-grade chips have an absolute maximum rating of 1.15V which makes it still safe to put 1.05V - Lower the regulator-min value to the smallest value allowed from the Quad-A53, 1.2GHz version of the SoC BUCK3: - This regulator is used for SoC input voltages VDD_GPU, VDD_VPU and VDD_DRAM. - Use the smallest value of these three inputs as the regulator-min - Use the largest value of these three inputs as the regulator-max LDO2: - This LDO is used for VDD_SNVS_0P8 SoC input voltage. As this has a single nominal input voltage just put this in the middle of 0.8V. Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-06arm64: dts: rockchip: Fix SD card controller probe on Pinephone ProOndrej Jirman1-2/+2
Voltage constraints on vccio_sd are invalid. They don't match the voltages that LDO9 can generate, and this causes rk808-regulator driver to fail to probe with -EINVAL when it tries to apply the constraints during boot. Fix the constraints to something that LDO9 can be actually configured for. Fixes: 78a21c7d5952 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro") Signed-off-by: Ondrej Jirman <megi@xff.cz> Reviewed-by: Caleb Connolly <kc@postmarketos.org> Reviewed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-aFabio Estevam1-1/+0
The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-2-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-pumaFabio Estevam1-1/+0
The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: rk3399: Radxa ROCK 4C+Jagan Teki2-0/+647
Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by: Stephen Chen <stephen@radxa.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Add RK3399-T OPP tableJagan Teki1-0/+114
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10Michael Riesch1-1/+1
The property "vbus-supply" was copied from the vendor kernel but is not available in mainstream. Use correct property "phy-supply". Fixes: d6cfb110b0fd ("arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220905064335.104650-2-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: fix property for usb2 phy supply on rock-3aMichael Riesch1-1/+1
The property "vbus-supply" was copied from the vendor kernel but is not available in mainstream. Use correct property "phy-supply". Fixes: 254a1f6a29e7 ("arm64: dts: rockchip: add usb3 support to the radxa rock3 model a") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220905064335.104650-1-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: meson: add support for Beelink GT1 UltimateChristian Hewitt2-0/+92
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200) reference design with the following specifications: - 3GB DDR3 RAM - 32GB eMMC - HDMI 2.1 video - S/PDIF optical output - 10/100/1000 Ethernet - AP6356S Wireless (802.11 a/b/g/n, BT 4.2) - 3x USB 2.0 ports - IR receiver - 1x micro SD card slot - 1x Power LED (white) - 1x Reset button (internal) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com
2022-09-05arm64: dts: imx8ulp: add #reset-cells for pccPeng Fan1-0/+3
The binding file clock/imx8ulp-pcc-clock.yaml indicates '#reset-cells' is a required property, add it. Fixes: fe6291e96313 ("arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.