| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add WM8978 sound codec node to RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add dmac phandles to SSI nodes to support DMA operation.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210921084605.16250-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable I2C{0,1,3} support on RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210920182955.13445-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable USB2.0 Host/Device support on RZ/G2L SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210920182955.13445-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
dtc complains about the leading zeroes:
arch/arm64/boot/dts/qcom/sm6125.dtsi:497.19-503.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f121000: unit name should not have leading 0s
arch/arm64/boot/dts/qcom/sm6125.dtsi:505.19-510.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f123000: unit name should not have leading 0s
arch/arm64/boot/dts/qcom/sm6125.dtsi:512.19-517.6: Warning (unit_address_format): /soc/timer@f120000/frame@0f124000: unit name should not have leading 0
Remove them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210922195208.1734936-1-festevam@gmail.com
|
|
The current drive strength values are not sufficient on non discrete
boards and this leads to CRC errors during switching to HS400 enhanced
strobe mode.
Hardware simulation results on non discrete boards shows up that use the
maximum drive strength values for data and command lines could helps
in avoiding these CRC errors.
So, update data and command line drive strength values to maximum.
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629132650-26277-1-git-send-email-sbhanu@codeaurora.org
|
|
Other DTS files that include the dtsi will want to to add children
to the i2c buses from the i2c-mus. Without a label they would have to
specify the full path.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
[add phandles for first mux as well]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-3-heiko@sntech.de
|
|
This is not strictly needed, as 3.3V is the default,
but good to have for descriptive purposes nevertheless.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
[fixed ordering]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-2-heiko@sntech.de
|
|
LDO_REG7 is used for generating VCC_18.
LDO_REG4 is not connected to anything - delete it.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210922230429.2162535-1-heiko@sntech.de
|
|
U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.
Loading fdt from FIT Image at a0000000 ...
Description: ls1012ardb-dtb
Type: Flat Device Tree
Data Start: 0xab111474
Data Size: 11285 Bytes = 11 KiB
Architecture: AArch64
Load Address: 0x90000000
Loading fdt from 0xab111474 to 0x90000000
Booting using the fdt blob at 0x90000000
Uncompressing Kernel Image
Loading Device Tree to 000000008fffa000, end 000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE: RNG: INSTANTIATED
Starting kernel ...
Fix the above error by specifying serial value to duart.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Reorder flexspi clock-names entry to make it compliant with bindings.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
No functional changes, but the ranges should be grouped by region.
Otherwise, schema dtbs_check would report the following errors.
"/linux-imx/arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: pcie@33800000: ranges: 'oneOf' conditional failed, one must be fixed:
/linux-imx/arch/arm64/boot/dts/freescale/imx8mq-evk.dt.yaml: pcie@33800000: ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152]] is not of type 'boolean'
True was expected
[[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152]] is not of type 'null'
[2164260864, 0, 0, 536346624, 0, 65536, 2181038080, 0, 402653184, 402653184, 0, 133169152] is too long
From schema: //linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml"
Refer to commit 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows").
The num-viewport is not required anymore, remove them totally.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The ZII Ultra board uses the same design as the EVK board supplying
PCIE_VPH with 3.3V. Add this connection to the DT to allow the PCIe
driver to enable the internal PHY regulator, as required by the
reference manual.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SD card slot on the Reform 2 uses the card detect pad routed to
the uSDHC2 module as intended. This is currently working as it is the
default mux setting for this pad, but better be explicit and add it
to the pinctrl node.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Align the name of operating-points node to dtschema to fix warnings like:
ddrc-opp-table: $nodename:0: 'ddrc-opp-table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The conversion of the spi-imx driver to use GPIO descriptors
in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors")
helped to detect the following SPI chipselect polarity mismatch on an
imx6q-sabresd for example:
[ 4.854337] m25p80@0 enforce active low on chipselect handle
Prior to the above commit, the chipselect polarity passed via cs-gpios
property was ignored and considered active-low.
The reason for such mismatch is clearly explained in the comments inside
drivers/gpio/gpiolib-of.c:
* SPI children have active low chip selects
* by default. This can be specified negatively
* by just omitting "spi-cs-high" in the
* device node, or actively by tagging on
* GPIO_ACTIVE_LOW as flag in the device
* tree. If the line is simultaneously
* tagged as active low in the device tree
* and has the "spi-cs-high" set, we get a
* conflict and the "spi-cs-high" flag will
* take precedence.
To properly represent the SPI chipselect polarity, change it to active-low
when the "spi-cs-high" property is absent.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Align the name of operating-points node to dtschema to fix warnings like:
cpu_opp_table: $nodename:0: 'cpu_opp_table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
Enable the IPA node for LTE and skip for wifi-only SKUs
Signed-off-by: Sujit Kautkar <sujitka@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210920113220.v1.1.I904da9664f294fcf222f6f378d37eaadd72ca92e@changeid
|
|
According to Documentation/devicetree/bindings/mmc/sdhci-msm.txt
a SoC specific compatible should be used in addition to the IP version
compatible, but for some reason it was never added for MSM8916.
Add the "qcom,msm8916-sdhci" compatible additionally to make the
device tree match the documented bindings.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-3-stephan@gerhold.net
|
|
This fixes the following warning when building with W=1:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property,
but no unit name
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210921152120.6710-1-stephan@gerhold.net
|
|
Let's use the GIC_SPI macro instead of a plain 0 here to match other
uses of the primary interrupt controller on sc7280.
Suggested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811181904.779316-1-swboyd@chromium.org
|
|
Add cooling-cells property and the cooling maps for the gpu thermal
zones to support GPU thermal cooling.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628691835-36958-2-git-send-email-akhilpo@codeaurora.org
|
|
Add the necessary dt nodes for gpu support in sc7280.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628691835-36958-1-git-send-email-akhilpo@codeaurora.org
|
|
Add the GPUCC, DISPCC and VIDEOCC clock headers which were dropped
earlier.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1628642571-25383-1-git-send-email-tdas@codeaurora.org
|
|
Add pm7325 PMIC gpio support for vol+ on sc7280-idp.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631877040-26587-1-git-send-email-skakit@codeaurora.org
|
|
Enable powerkey and resin nodes to let the board handle POWER and
Volume- keys properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-3-dmitry.baryshkov@linaro.org
|
|
Specify recovery and bootloader magic values to be programmed by the
qcom-pon driver. This allows the bootloader to handle
reboot-to-bootloader functionality.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-2-dmitry.baryshkov@linaro.org
|
|
Change pm8150 to use the qcom,pm8998-pon compatible string for the pon
in order to pass reboot mode properly.
Fixes: 5101f22a5c37 ("arm64: dts: qcom: pm8150: Add base dts file")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916151341.1797512-1-dmitry.baryshkov@linaro.org
|
|
Based on downstream codeaurora code.
Tested (USB2 only) on IPQ6010 based hardware.
Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[bjorn: Changed dwc3 node name to usb, per binding]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/ebc2d340d566fa2d43127e253d5b8b134a87a78e.1630389452.git.baruch@tkos.co.il
|
|
Follow dma-controller.yaml schema to use `dma-controller` as node name
of BAM DMA devices.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210831052325.21229-1-shawn.guo@linaro.org
|
|
There's nothing magical about GPIO91 and boards could use different
GPIOs for card detect. Move the pin out of the dtsi file and to the
only existing board file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210830080621.1.Ia15d97bc4a81f2916290e23a8fde9cbc66186159@changeid
|
|
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-4-shawn.guo@linaro.org
|
|
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-3-shawn.guo@linaro.org
|
|
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
|
|
sc7280 has 8 big.LITTLE CPUs setup with DynamIQ, so all cores are
within the same CPU cluster. Add cpu-map to define the CPU topology.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1629887818-28489-1-git-send-email-rnayak@codeaurora.org
|
|
The firmware for the modem and WiFi subsystems platform specific and is
signed with a OEM specific key (or a test key). In order to support more
than a single device it is therefor not possible to rely on the default
path and stash these files directly in the firmware directory.
This has already been addressed for other platforms, but the APQ8016 SBC
(aka db410c) was never finished upstream.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210531224453.783218-1-bjorn.andersson@linaro.org
|
|
On the Lenovo Yoga C630, the WiFi/BT chip can use both RF
channels/antennas, so add the regulator for it.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210914181603.32708-1-steev@kali.org
|
|
Existing display port phy reg property is derived from usb phy which
map display port phy pcs to wrong address which cause aux init
with wrong address and prevent both dpcd read and write from working.
Fix this problem by assigning correct pcs address to display port
phy reg property.
Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631216998-10049-1-git-send-email-khsieh@codeaurora.org
|
|
Homestar is a trogdor variant. The DT bits are essentially the same as
in the downstream tree, except for:
- skip -rev0 and rev1 which were early builds and have their issues,
it's not very useful to support them upstream
- don't include the .dtsi for the MIPI cameras, which doesn't exist
upstream
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909122053.1.Ieafda79b74f74a2b15ed86e181c06a3060706ec5@changeid
|
|
IPQ8074 uses SPMI for communication with the PMIC, so
since its already supported add the DT node for it.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210905165816.655275-1-robimarko@gmail.com
|
|
The PMI8998 PMIC has a WLED backlight controller, which is used on
most MSM8998 and SDM845 based devices: add a base configuration for
it and keep it disabled.
This contains only the PMIC specific configuration that does not
change across boards; parameters like number of strings, OVP and
current limits are product specific and shall be specified in the
product DT in order to achieve functionality.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210909123628.365968-1-angelogioacchino.delregno@somainline.org
|
|
The charger thermistor on Lazor, CoachZ rev1 and Pompom rev1+2 is
either the wrong part or not stuffed at all, the same is true for
the skin temperature thermistor on CoachZ rev1. The corresponding
thermal zones are already disabled for these devices, in addition
delete the ADC nodes of the thermistors.
For Lazor and CoachZ rev1 also disable the PM6150 ADC and thermal
monitor since none of the ADC channels is used.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210903122212.v2.1.I9777d0036ecbb749a4fb9ebb892f94c6e3a51772@changeid
|
|
tx-fifo-resize is now added by default by the dwc3-qcom driver
to the SNPS DWC3 child node.
So, lets drop the tx-fifo-resize property from dwc3-qcom nodes
as having it there will cause the dwc3-qcom driver to error and
abort probe with:
[ 1.362938] dwc3-qcom 8af8800.usb: unable to add property
[ 1.368405] dwc3-qcom 8af8800.usb: failed to register DWC3 Core, err=-17
Fixes: cefdd52fa045 ("usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902220325.1783567-1-robimarko@gmail.com
|
|
The sc7180's dynamic-power-coefficient violates the device tree bindings.
The bindings (arm/cpus.yaml) say that the units for the
dynamic-power-coefficient are supposed to be "uW/MHz/V^2". The ones for
sc7180 aren't this. Qualcomm arbitrarily picked 100 for the "little" CPUs
and then picked a number for the big CPU based on this.
At the time, there was a giant dicussion about this. Apparently Qualcomm
Engineers were instructed not to share the actual numbers here. As part
of the discussion, I pointed out [1] that these numbers shouldn't really
be secret since once a device is shipping anyone can just run a script
and produce them. This patch is the result of running the script I posted
in that discussion on sc7180-trogdor-coachz, which is currently available
for purchase by consumers.
[1] https://lore.kernel.org/r/CAD=FV=U1FP0e3_AVHpauUUZtD-5X3XCwh5aT9fH_8S_FFML2Uw@mail.gmail.com/
I ran the script four times, measuring little, big, little, big. I used
the 64-bit version of dhrystone 2.2 in my test. I got these results:
576 kHz, 596 mV, 20 mW, 88 Cx
768 kHz, 596 mV, 32 mW, 122 Cx
1017 kHz, 660 mV, 45 mW, 97 Cx
1248 kHz, 720 mV, 87 mW, 139 Cx
1324 kHz, 756 mV, 109 mW, 148 Cx
1516 kHz, 828 mV, 150 mW, 148 Cx
1612 kHz, 884 mV, 182 mW, 147 Cx
1708 kHz, 884 mV, 192 mW, 146 Cx
1804 kHz, 884 mV, 207 mW, 149 Cx
Your dynamic-power-coefficient for cpu 0: 132
825 kHz, 596 mV, 142 mW, 401 Cx
979 kHz, 628 mV, 183 mW, 427 Cx
1113 kHz, 656 mV, 224 mW, 433 Cx
1267 kHz, 688 mV, 282 mW, 449 Cx
1555 kHz, 812 mV, 475 mW, 450 Cx
1708 kHz, 828 mV, 566 mW, 478 Cx
1843 kHz, 884 mV, 692 mW, 476 Cx
1900 kHz, 884 mV, 722 mW, 482 Cx
1996 kHz, 916 mV, 814 mW, 482 Cx
2112 kHz, 916 mV, 862 mW, 483 Cx
2208 kHz, 916 mV, 962 mW, 521 Cx
2323 kHz, 940 mV, 1060 mW, 517 Cx
2400 kHz, 956 mV, 1133 mW, 518 Cx
Your dynamic-power-coefficient for cpu 6: 471
576 kHz, 596 mV, 26 mW, 103 Cx
768 kHz, 596 mV, 40 mW, 147 Cx
1017 kHz, 660 mV, 54 mW, 114 Cx
1248 kHz, 720 mV, 97 mW, 151 Cx
1324 kHz, 756 mV, 113 mW, 150 Cx
1516 kHz, 828 mV, 154 mW, 148 Cx
1612 kHz, 884 mV, 194 mW, 155 Cx
1708 kHz, 884 mV, 203 mW, 152 Cx
1804 kHz, 884 mV, 219 mW, 155 Cx
Your dynamic-power-coefficient for cpu 0: 142
825 kHz, 596 mV, 148 mW, 530 Cx
979 kHz, 628 mV, 189 mW, 475 Cx
1113 kHz, 656 mV, 230 mW, 461 Cx
1267 kHz, 688 mV, 287 mW, 466 Cx
1555 kHz, 812 mV, 469 mW, 445 Cx
1708 kHz, 828 mV, 567 mW, 480 Cx
1843 kHz, 884 mV, 699 mW, 482 Cx
1900 kHz, 884 mV, 719 mW, 480 Cx
1996 kHz, 916 mV, 814 mW, 484 Cx
2112 kHz, 916 mV, 861 mW, 483 Cx
2208 kHz, 916 mV, 963 mW, 522 Cx
2323 kHz, 940 mV, 1063 mW, 520 Cx
2400 kHz, 956 mV, 1135 mW, 519 Cx
Your dynamic-power-coefficient for cpu 6: 489
As you can see, the calculations aren't perfectly consistent but
roughly you could say about 480 for big and 137 for little.
The ratio between these numbers isn't quite the same as the ratio
between the two numbers that Qualcomm used. Perhaps this is because
Qualcomm measured something slightly different than the 64-bit version
of dhrystone 2.2 or perhaps it's because they fudged these numbers a
bit (and fudged the capacity-dmips-mhz). As per discussion [2], let's
use the numbers I came up with and also un-fudge
capacity-dmips-mhz. While unfudging capacity-dmips-mhz, let's scale it
so that bigs are 1024 which seems to be the common practice.
In general these numbers don't need to be perfectly exact. In fact,
they can't be since the CPU power depends a lot on what's being run on
the CPU and the big/little CPUs are each more or less efficient in
different operations. Historically running the 32-bit vs. 64-bit
versions of dhrystone produced notably different numbers, though I
didn't test this time.
We also need to scale all of the sustainable-power numbers by the same
amount. I scale ones related to the big CPUs by the adjustment I made
to the big dynamic-power-coefficient and the ones related to the
little CPUs by the adjustment I made to the little
dynamic-power-coefficient.
[2] https://lore.kernel.org/r/0a865b6e-be34-6371-f9f2-9913ee1c5608@codeaurora.org/
Fixes: 71f873169a80 ("arm64: dts: qcom: sc7180: Add dynamic CPU power coefficients")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210902145127.v2.1.I049b30065f3c715234b6303f55d72c059c8625eb@changeid
|
|
Add a device tree for Xiaomi Mi 5 (gemini).
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-5-y.oudjana@protonmail.com
|
|
There are 5 Xiaomi devices with the MSM8996 SoC:
- Mi 5 (gemini): MSM8996 + PMI8994
- Mi Note 2 (scorpio): MSM8996 Pro + PMI8996
- Mi 5s (capricorn): MSM8996 Pro + PMI8996
- Mi Mix (lithium): MSM8996 Pro + PMI8996
- Mi 5s Plus (natrium): MSM8996 Pro + PMI8996
These devices share a common board design with only a few differences.
Add support for the common board, as well as support for the Mi Note 2.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-4-y.oudjana@protonmail.com
|
|
Add a node for blsp2_i2c3 which is used for type-C port control chips
and speaker codecs on some devices.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-3-y.oudjana@protonmail.com
|
|
Move blsp1_uart2_default and blsp1_uart2_sleep to the SoC device tree to
avoid duplicating them in other device trees.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901193214.250375-2-y.oudjana@protonmail.com
|
Biju Das
Fabio Estevam
Shaik Sajida Bhanu
Jakob Unterwurzacher
Kuldeep Singh
Richard Zhu
Michael Walle
Lucas Stach
Lucas Stach
Krzysztof Kozlowski
Sujit Kautkar
Stephan Gerhold
Stephen Boyd
Manaf Meethalavalappu Pallikunhi
Akhil P Oommen
Taniya Das
satya priya
Dmitry Baryshkov
Kathiravan T
Shawn Guo
Douglas Anderson
Rajendra Nayak
Bjorn Andersson
Steev Klimaszewski
Kuogee Hsieh
Matthias Kaehlcke
Robert Marko
AngeloGioacchino Del Regno
Raffaele Tranquillini
Yassine Oudjana