aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-09-13arm64: zynqmp: Remove information about dma clock on zcu106Michal Simek1-1/+0
Clock setting is not static anymore that's why it depends on firmware setup that's why remove this comment. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/17973ffda4e163a4b89d4732fe6fc7e089962ae7.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Update rtc calibration valueSrinivas Neeli1-1/+1
As per the design specification "The 16-bit Seconds Calibration Value represents the number of Oscillator Ticks that are required to measure the largest time period that is less than or equal to 1 second. For an oscillator that is 32.768 KHz, this value will be 0x7FFF." Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0d36d9fe999ff82f10d42ab5fc0d1e907c26ac34.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add note about UHS mode on some boardsMichal Simek4-1/+15
Add note about UHS mode and add no-1-8-v property to zc1751-dc1 board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/462b95844e7aedb00768035913265d7af90c3b2f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Move DP nodes to the end of file on zcu106Michal Simek1-11/+11
This location is used by others DTs files that's why this move. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/d14404afd846f975a421023e9e9b6ad18585719f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove can aliases from zc1751Michal Simek1-2/+0
Networking subsystem is not using aliases that's why remove them for can devices. There is also no any other Xilinx ZynqMP DT file with them. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/475a60fc4d01ba9c61579801fb84620b6905dcad.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout valueMounika Grace Akula1-1/+2
This patch adds reset-on-timeout to FPD WDT which will trigger an interrupt to PMU when watchdog expiry happens and PMU takes the necessary action. If this property is not enabled, reason will not be known when watchdog expiry happens. This patch also modifies the default timeout to 60 seconds. Reason is that if u-boot enables WDT, it will set the timeout to 10 seconds and this is not enough to boot till Linux and start the WDT application in Linux. 60 seconds is the maximum safest value to boot till Linux and start the WDT application. Users need to change this timeout value to fit their needs. Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/5848a81447921240fddfe2f5749ae0746fcbbdbd.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: List reset property for ethernet phyMichal Simek2-1/+3
Add information about reset gpio for ethernet phy in case someone wants to use it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e153f0cda37a2a6ea1c6e11fb0a4af1d400f29e2.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add nvmem alises for eepromsMichal Simek5-1/+6
Use nvmem alias to point to eeprom memory which contains information about board. The change is done based on discussion in the link below. Link: https://lore.kernel.org/r/CAL_JsqLMDqpkyg-Q7mUfw-XH67-v068Q6e9wTq2UOoN=0-_coQ@mail.gmail.com Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/9b860b47ec3ca64340b4d29317e92b667236d7d1.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Move clock node to zynqmp-clk-ccf.dtsiMichal Simek2-16/+12
Using clock firmware driver is not the only one option how to configure clock. In past fixed clocks were also used and that configuration is still valid that's why move clock firmware node to the same file where zynqmp_clk references are used. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/48bfd8cf0de4d10b9c4d745218595f28954f70d5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Remove additional newlineMichal Simek1-1/+0
This is sync between Linux and U-Boot. Trivial change. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/16f6f41c8d748d3c7cd4f49b2839e63a5b41c944.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable nand driver for dc2 and dc3Michal Simek2-1/+34
Add description for nand devices on zc1751 dc2 and dc3 boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/e103821bdb717132559e780f1a4f4f6fefc95688.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire DP and DPDMA for dc1/dc4Michal Simek2-1/+17
Enable Display Port and Display Port DMA for zc1751 dc1 and dc4. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/dbbd212bcc587e835d6df2f91622f5baa124bff5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add missing mio-bank properties to dc1 and dc5Michal Simek2-0/+3
Add missing mio-bank properties to zc1751 dc1 and dc5 boards. The same change was done by commit 63481699d6e3 ("arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis"). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2b2ab31639c706651dfd319f5b6bc59e68f111b6.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add missing SMID for pcie to zynqmp.dtsiStefano Stabellini1-0/+2
The SMMU is disabled in device tree so this change has no impact. The benefit is that this way it is in sync with xen.dtsi. Xen enables the SMMU and makes use of it. Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/43f21f5033f7806fba049474bced6131c8cb98ba.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Disable WP on zcu111Michal Simek1-0/+1
On this board there is SD slot without WP connected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/88e41d4f5c6a7353762bd5ad38b92ce352c3a123.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add phy description for usb3.0Michal Simek6-0/+21
usb3.0 requires serdes setting that's why also wire it up. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/cd856e5f87bc967373691d04e79de3d0022ef424.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Correct psgtr description for zcu100-revCMichal Simek1-4/+5
Enable psgtr node and also fix clock names to be aligned with other zynqmp boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/bd35fdaac08208578b2bb5059ba2c59bb4e66dac.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Wire psgtr for zc1751-xm015Michal Simek1-0/+31
Add psgtr description for SATA and USB. Display Port could be also added but it wasn't tested yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3fb11fdb9ade828fa174379515e45ba02bc17247.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Correct zcu111 psgtr descriptionMichal Simek1-3/+3
DP and SATA psgtrs are swapped. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d47cbf374423cb71bb4be5e45e3d834da0c4673a.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Add pinctrl description for all boardsMichal Simek10-11/+2340
The commit 1dccb5ec0123 ("dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver") and commit 8b242ca700f8 ("pinctrl: Add Xilinx ZynqMP pinctrl driver support") add support for Xilinx ZynqMP pinctrl driver that's why describe pins configuration for current boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/d8bc42600da85f5a23d977d4b61e6528720573e5.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Fix irps5401 device nodesMichal Simek2-7/+12
- Add compatible string for irps5401 chip. - Do not use irps54012 as device node which is not correct. - Fix addresses of irps5401/u180 on zcu104 revisions. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/10bf5f9e7a18579626fb1850e3a8a7476ba6f2ed.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Enable fpd_dma for zcu104 platformsMichal Simek1-0/+32
Enable fpd_dma for this board. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/76d330bf2b2414efa2e98965a3ca7f7c43e3645f.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Do not duplicate flash partition label propertyAmit Kumar Mahapatra1-2/+2
In kernel 5.4, support has been added for reading MTD devices via the nvmem API. For this the mtd devices are registered as read-only NVMEM providers under sysfs with the same name as the flash partition label property. So if flash partition label property of multiple flash devices are identical then the second mtd device fails to get registered as a NVMEM provider. This patch fixes the issue by having different label property for different flashes. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
2021-09-13arm64: zynqmp: Disable CCI by defaultMichal Simek1-0/+1
There is no reason to have CCI no enabled by default. Enable it when your system configuration requires it. In Xilinx configuration flow this is work for Device Tree Generator which reads information from HW Design configuration. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/f507d45fbaa0bd31f641e758efa40a2532466ced.1623684253.git.michal.simek@xilinx.com
2021-09-02Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds2-1121/+1
Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-09-01Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds168-2118/+13262
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-01Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-8/+0
Pull arm64 updates from Catalin Marinas: - Support for 32-bit tasks on asymmetric AArch32 systems (on top of the scheduler changes merged via the tip tree). - More entry.S clean-ups and conversion to C. - MTE updates: allow a preferred tag checking mode to be set per CPU (the overhead of synchronous mode is smaller for some CPUs than others); optimisations for kernel entry/exit path; optionally disable MTE on the kernel command line. - Kselftest improvements for SVE and signal handling, PtrAuth. - Fix unlikely race where a TLBI could use stale ASID on an ASID roll-over (found by inspection). - Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher exception levels; drop unnecessary sigdelsetmask() call in the signal32 handling; remove BUG_ON when failing to allocate SVE state (just signal the process); SYM_CODE annotations. - Other trivial clean-ups: use macros instead of magic numbers, remove redundant returns, typos. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits) arm64: Do not trap PMSNEVFR_EL1 arm64: mm: fix comment typo of pud_offset_phys() arm64: signal32: Drop pointless call to sigdelsetmask() arm64/sve: Better handle failure to allocate SVE register storage arm64: Document the requirement for SCR_EL3.HCE arm64: head: avoid over-mapping in map_memory arm64/sve: Add a comment documenting the binutils needed for SVE asm arm64/sve: Add some comments for sve_save/load_state() kselftest/arm64: signal: Add a TODO list for signal handling tests kselftest/arm64: signal: Add test case for SVE register state in signals kselftest/arm64: signal: Verify that signals can't change the SVE vector length kselftest/arm64: signal: Check SVE signal frame shows expected vector length kselftest/arm64: signal: Support signal frames with SVE register data kselftest/arm64: signal: Add SVE to the set of features we can check for arm64: replace in_irq() with in_hardirq() kselftest/arm64: pac: Fix skipping of tests on systems without PAC Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs ...
2021-09-01Merge tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-15/+15
Pull drm updates from Dave Airlie: "Highlights: - i915 has seen a lot of refactoring and uAPI cleanups due to a change in the upstream direction going forward This has all been audited with known userspace, but there may be some pitfalls that were missed. - i915 now uses common TTM to enable discrete memory on DG1/2 GPUs - i915 enables Jasper and Elkhart Lake by default and has preliminary XeHP/DG2 support - amdgpu adds support for Cyan Skillfish - lots of implicit fencing rules documented and fixed up in drivers - msm now uses the core scheduler - the irq midlayer has been removed for non-legacy drivers - the sysfb code now works on more than x86. Otherwise the usual smattering of stuff everywhere, panels, bridges, refactorings. Detailed summary: core: - extract i915 eDP backlight into core - DP aux bus support - drm_device.irq_enabled removed - port drivers to native irq interfaces - export gem shadow plane handling for vgem - print proper driver name in framebuffer registration - driver fixes for implicit fencing rules - ARM fixed rate compression modifier added - updated fb damage handling - rmfb ioctl logging/docs - drop drm_gem_object_put_locked - define DRM_FORMAT_MAX_PLANES - add gem fb vmap/vunmap helpers - add lockdep_assert(once) helpers - mark drm irq midlayer as legacy - use offset adjusted bo mapping conversion vgaarb: - cleanups fbdev: - extend efifb handling to all arches - div by 0 fixes for multiple drivers udmabuf: - add hugepage mapping support dma-buf: - non-dynamic exporter fixups - document implicit fencing rules amdgpu: - Initial Cyan Skillfish support - switch virtual DCE over to vkms based atomic - VCN/JPEG power down fixes - NAVI PCIE link handling fixes - AMD HDMI freesync fixes - Yellow Carp + Beige Goby fixes - Clockgating/S0ix/SMU/EEPROM fixes - embed hw fence in job - rework dma-resv handling - ensure eviction to system ram amdkfd: - uapi: SVM address range query added - sysfs leak fix - GPUVM TLB optimizations - vmfault/migration counters i915: - Enable JSL and EHL by default - preliminary XeHP/DG2 support - remove all CNL support (never shipped) - move to TTM for discrete memory support - allow mixed object mmap handling - GEM uAPI spring cleaning - add I915_MMAP_OBJECT_FIXED - reinstate ADL-P mmap ioctls - drop a bunch of unused by userspace features - disable and remove GPU relocations - revert some i915 misfeatures - major refactoring of GuC for Gen11+ - execbuffer object locking separate step - reject caching/set-domain on discrete - Enable pipe DMC loading on XE-LPD and ADL-P - add PSF GV point support - Refactor and fix DDI buffer translations - Clean up FBC CFB allocation code - Finish INTEL_GEN() and friends macro conversions nouveau: - add eDP backlight support - implicit fence fix msm: - a680/7c3 support - drm/scheduler conversion panfrost: - rework GPU reset virtio: - fix fencing for planes ast: - add detect support bochs: - move to tiny GPU driver vc4: - use hotplug irqs - HDMI codec support vmwgfx: - use internal vmware device headers ingenic: - demidlayering irq rcar-du: - shutdown fixes - convert to bridge connector helpers zynqmp-dsub: - misc fixes mgag200: - convert PLL handling to atomic mediatek: - MT8133 AAL support - gem mmap object support - MT8167 support etnaviv: - NXP Layerscape LS1028A SoC support - GEM mmap cleanups tegra: - new user API exynos: - missing unlock fix - build warning fix - use refcount_t" * tag 'drm-next-2021-08-31-1' of git://anongit.freedesktop.org/drm/drm: (1318 commits) drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to bounding box drm/amd/display: Remove duplicate dml init drm/amd/display: Update bounding box states (v2) drm/amd/display: Update number of DCN3 clock states drm/amdgpu: disable GFX CGCG in aldebaran drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amdgpu: Add support for RAS XGMI err query drm/amdkfd: Account for SH/SE count when setting up cu masks. drm/amdgpu: rename amdgpu_bo_get_preferred_pin_domain drm/amdgpu: drop redundant cancel_delayed_work_sync call drm/amdgpu: add missing cleanups for more ASICs on UVD/VCE suspend drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend drm/amdkfd: map SVM range with correct access permission drm/amdkfd: check access permisson to restore retry fault drm/amdgpu: Update RAS XGMI Error Query drm/amdgpu: Add driver infrastructure for MCA RAS drm/amd/display: Add Logging for HDMI color depth information drm/amd/amdgpu: consolidate PSP TA init shared buf functions drm/amd/amdgpu: add name field back to ras_common_if drm/amdgpu: Fix build with missing pm_suspend_target_state module export ...
2021-09-01Merge tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds2-0/+203
Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.15-rc1. Nothing huge in here, just lots of constant forward progress on a number of different drivers and hardware support: - more USB 4/Thunderbolt support added - dwc3 driver updates and additions - usb gadget fixes and addtions for new types - udc gadget driver updates - host controller updates - removal of obsolete drivers - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: isp1760: otg control register access usb: isp1760: use the right irq status bit usb: isp1760: write to status and address register usb: isp1760: fix qtd fill length usb: isp1760: fix memory pool initialization usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least" usb: dwc2: Fix spelling mistake "was't" -> "wasn't" usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed" usb: host: xhci-rcar: Don't reload firmware after the completion usb: xhci-mtk: allow bandwidth table rollover usb: mtu3: fix random remote wakeup usb: mtu3: return successful suspend status usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint usb: xhci-mtk: modify the SOF/ITP interval for mt8195 usb: xhci-mtk: add a member of num_esit usb: xhci-mtk: check boundary before check tt usb: xhci-mtk: update fs bus bandwidth by bw_budget_table usb: xhci-mtk: fix issue of out-of-bounds array access usb: xhci-mtk: support option to disable usb2 ports usb: xhci-mtk: fix use-after-free of mtk->hcd ...
2021-08-31Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds4-6/+7
Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge remote-tracking branch 'tip/sched/arm64' into for-next/coreCatalin Marinas5-9/+62
* tip/sched/arm64: (785 commits) Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0 arm64: Implement task_cpu_possible_mask() sched: Introduce dl_task_check_affinity() to check proposed affinity sched: Allow task CPU affinity to be restricted on asymmetric systems sched: Split the guts of sched_setaffinity() into a helper function sched: Introduce task_struct::user_cpus_ptr to track requested affinity sched: Reject CPU affinity changes based on task_cpu_possible_mask() cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq() cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus() cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1 sched: Introduce task_cpu_possible_mask() to limit fallback rq selection sched: Cgroup SCHED_IDLE support sched/topology: Skip updating masks for non-online nodes Linux 5.14-rc6 lib: use PFN_PHYS() in devmem_is_allowed() ...
2021-08-30Merge back new PM domains material for v5.15.Rafael J. Wysocki1-0/+24
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski5-5/+21
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26arm/arm64: dts: Fix remaining dtc 'unit_address_format' warningsRob Herring3-3/+3
Fix all the remaining dtc 'unit_address_format' warnings except for the ones related to 'register-bit-led'. For those, we need to decide on and document the node name. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210823165126.2320910-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-24Merge 5.14-rc7 into usb-nextGreg Kroah-Hartman5-5/+21
We need the USB fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-20arm64: dts: sparx5: Add the Sparx5 switch frame DMA supportSteen Hegelund1-2/+3
This adds the interrupt for the Sparx5 Frame DMA. If this configuration is present the Sparx5 SwitchDev driver will use the Frame DMA feature, and if not it will use register based injection and extraction for sending and receiving frames to the CPU. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-18Merge tag 'mvebu-dt64-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dtArnd Bergmann17-805/+1267
mvebu dt64 for 5.15 (part 1) - DTS updates for Marvell Armada CN913x platforms + Add support for Armada CN913x Development Board topology "B" + Add support for Armada CN913x Reference Design boards (CRB) + Fixes the NAND partitioning scheme in DTS eliminating gap between consecutive partitions + Fix 10Gb ports PHY mode names - Extend PCIe MEM space on Armada 37xx: useful for some combination of PCIe cards where the initial 16MB was not enough * tag 'mvebu-dt64-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: armada-37xx: Extend PCIe MEM space arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada arm64: dts: add support for Marvell cn9130-crb platform dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards arm64: dts: cn913x: add device trees for topology B boards Link: https://lore.kernel.org/r/878s10ypxe.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'hisi-arm64-dt-for-5.15' of git://github.com/hisilicon/linux-hisi into arm/dtArnd Bergmann1-1/+1
ARM64: DT: HiSilicon ARM64 DT updates for 5.15 - Address a PCI bus range warning of the hi3660 SoC * tag 'hisi-arm64-dt-for-5.15' of git://github.com/hisilicon/linux-hisi: arm64: dts: HiSilicon: hi3660: address a PCI warning Link: https://lore.kernel.org/r/611B9BE9.8050904@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'sunxi-dt-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann1-2/+25
Our usual round of DT patches for the 5.15 merge window, with some Tanix TX6 improvements this time. * tag 'sunxi-dt-for-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h6: tanix-tx6: enable emmc arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names Link: https://lore.kernel.org/r/39cd7be5-a9a7-42b6-bc29-f895b9a3448a.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-18Merge tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann58-886/+6743
Qualcomm ARM64 updates for v5.15 SDM660 and SDM630 was concluded to be similar enough that they should be merged, and the derivative SDM636 was added to the bunch. The combined platform gained support for GPU, DMA, I2C, IMEM, display, power-domains, SDHCI, thermal, USB, interconnects, VADC, WLED and audio remoteproc. The Sony Xperia "Ganges" platform was similarly merged with "Nile", got cleaned up and gained touchscreen, USB, volume keys and uSD support. IPQ6018 gains USB2 and PCIe support and a few minor fixes. IPQ8074 gains SCM, PRNG and Crypto support and a DT style update of the PCIe nodes. MSM8916 gains Coresight STM support. The Xiaomi Redmi 2 is introduced, with touchscreen, notification LED and IMU support. MSM8996 gains support for GPU cooling and v3.0 of the SoC, which is used to introduce support for the Sony Xperia X Performance, XZ and XZs phones. SC7180 finally gains DisplayPort support and LPASS is updated accordingly. A number of fixes are introduced and with the newly introduced DRM aux bus in place Trogdor's panel is moved under the eDP bridge. SC7280 gained USB, eMMC, SD-card, QFPROM and IPA support, the new IDP2 board was added. SM6126 (aka Snapdragon 665) was introduced, together with the Sony Xperia 10II phone with support for framebuffer, USB, eMMC and volume keys. SM8150 gained inline crypto support for UFS enabled, CPU opp-tables was introduced to scale DDR and L3 frequencies and SPI nodes where added, in addition to a number of smaller fixes. SM8250 gained a number of minor fixes and had its serial engines wired up to use the GENI wrappers' DMA engines. SM8350 had wakeup-parent defined for the TLMM gpio node and I2C13 was introduced. SDM845 display clocks was corrected and Lenovo Yoga C630 got IPA enabled and now has working LTE connectivity. Additionally a number of minor fixes throughout to correct DT validation warnings. Lastly v5.14-rc3 is merge in to resolve the merge conflicts caused by the USB maintainer deciding to fix a regression in his tree. * tag 'qcom-arm64-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (114 commits) arm64: dts: qcom: sm8250: assign DSI clock source parents arm64: dts: qcom: sdm845-mtp: assign DSI clock source parents arm64: dts: qcom: sdm845: assign DSI clock source parents arm64: dts: qcom: sc7180: assign DSI clock source parents arm64: dts: qcom: sc7280-idp: Add device tree files for IDP2 dt-bindings: arm: qcom: Document qcom,sc7280-idp2 board arm64: dts: qcom: sm8350: fix IPA interconnects arm64: dts: qcom: sc7180: define ipa_fw_mem node arm64: dts: qcom: sc7280: enable IPA for sc7280-idp arm64: dts: qcom: sc7280: add IPA information arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip arm64: dts: qcom: ipq8074: add PRNG node arm64: dts: qcom: ipq8074: add crypto nodes arm64: dts: qcom: sm8350: add qupv3_id_1/i2c13 nodes arm64: dts: qcom: ipq6018: Add pcie support arm64: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster arm64: dts: qcom: sm8150: add SPI nodes arm64: dts: qcom: msm8916: Enable CoreSight STM component arm64: dts: qcom: sc7280: Add qfprom node arm64: dts: qcom: sc7280: Fixup the cpufreq node ... Link: https://lore.kernel.org/r/20210816231223.586597-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17arm64: dts: marvell: armada-37xx: Extend PCIe MEM spacePali Rohár2-2/+26
Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-08-16Merge tag 'v5.14-rc3' into arm64-for-5.15Bjorn Andersson12-19/+32
The USB maintainer felt the strong need to push '1f958f3dff42 ("Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"")' through the usb tree, so merge v5.14-rc3 to resolve the resulting merge conflicts. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-08-16Merge tag 'qcom-arm64-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixesArnd Bergmann5-5/+21
Qualcomm ARM64 fixes for v5.14 This fixes three regressions across Angler and Bullhead, introduced by advancements in the platform definition. It then corrects the powerdown GPIOs for the speaker amps on C630 and lastly fixes a typo that assigned CPU7 in SC7280 to the wrong CPUfreq domain. * tag 'qcom-arm64-fixes-for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sdm845-oneplus: fix reserved-mem arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7 arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping arm64: dts: qcom: msm8992-bullhead: Remove PSCI arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x Link: https://lore.kernel.org/r/20210816205030.576348-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'imx-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann26-65/+3021
i.MX arm64 device tree changes for 5.15: - New board support: Nitrogen8 SoM and MNT Reform2, LS1088A based Traverse Ten64, i.MX8M based GW7902. - A series from Ioana Ciornei to update PHY IRQ configuration for LayerScape SoCs. - A series from Tim Harvey to update Gateworks imx8mm-venice devices. - Replace deprecated `fsl,usbphy` property with phys phandle. - Add MIPI CSI phy and bridge descriptions for i.MX8MQ SoC. - Add JPEG encoder/decoder device nodes for i.MX8M SoCs. - Update PMU compatible and drop interrupt-affinity for i.MX8M SoCs. - Add Cadence HIFI4 DSP for i.MX8 MPlus SoC. - A few small and random updates on various boards. * tag 'imx-dt64-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits) arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible arm64: dts: ls1046a: fix eeprom entries arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputs arm64: dts: imx8mm-venice-gw7901: add support for USB hub subload arm64: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS arm64: dts: imx8mm-venice-gw700x: fix invalid pmic pin config arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions arm64: dts: imx: Add i.mx8mm/imx8mn Gateworks gw7902 dts support arm64: dts: imx8mp: Add dsp node arm64: dts: imx8m: Replace deprecated fsl,usbphy DT props with phys arm64: dts: imx8mq-evk: Remove unnecessary blank lines arm64: dts: imx8mq-evk: add CD pinctrl for usdhc2 arm64: dts: imx8mm-venice-gw7901: Remove unnecessary #address-cells/#size-cells ... Link: https://lore.kernel.org/r/20210814133853.9981-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'tegra-for-5.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann6-6/+816
arm64: tegra: Device tree changes for v5.15-rc1 Contains a couple of fixes across the board and adds support for the recently released NVIDIA Jetson TX2 NX Developer Kit. * tag 'tegra-for-5.15-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix compatible string for Tegra132 CPUs arm64: tegra: Add missing interconnects property for USB on Tegra186 arm64: tegra: Add NVIDIA Jetson TX2 NX Developer Kit support arm64: tegra: Add PWM nodes on Tegra186 arm64: tegra194: p2888: Correct interrupt trigger type of temperature sensor arm64: tegra: Fix Tegra194 PCIe EP compatible string Link: https://lore.kernel.org/r/20210813162157.2820913-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'amlogic-arm64-dt-for-v5.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dtArnd Bergmann2-0/+122
Amlogic ARM64 DT changes for v5.15 part 2: - add audio to nodes vega-s95 - add audio to nodes nexbox-a1 * tag 'amlogic-arm64-dt-for-v5.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: meson: add audio playback to vega-s95 dtsi arm64: dts: meson: add audio playback to nexbox-a1 Link: https://lore.kernel.org/r/47d77095-eee7-bbd9-d3aa-1dabeea3f0b9@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'renesas-arm-dt-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann1-0/+104
Renesas ARM DT updates for v5.15 (take two) - Pin control, ADC, and CANFD support for the RZ/G2L SoC, - Add interrupt-names properties to the Renesas RZ/A and RZ/G2L I2C Bus Interface. * tag 'renesas-arm-dt-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: i2c: renesas,riic: Make interrupt-names required arm64: dts: renesas: r9a07g044: Add I2C interrupt-names ARM: dts: rza: Add I2C interrupt-names dt-bindings: i2c: renesas,riic: Add interrupt-names arm64: dts: renesas: r9a07g044: Add CANFD node arm64: dts: renesas: r9a07g044: Add ADC node arm64: dts: renesas: r9a07g044: Add pinctrl node dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock Link: https://lore.kernel.org/r/cover.1628849623.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16arm64: dts: sc7180: Add required-opps for i2cRajendra Nayak1-0/+24
qup-i2c devices on sc7180 are clocked with a fixed clock (19.2 MHz) Though qup-i2c does not support DVFS, it still needs to vote for a performance state on 'CX' to satisfy the 19.2 Mhz clock frequency requirement. Use 'required-opps' to pass this information from device tree, and also add the power-domains property to specify the CX power-domain. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-14arm64: dts: add device tree for Traverse Ten64 (LS1088A)Mathew McBride2-0/+390
The Traverse Technologies Ten64 is a Mini-ITX form factor networking board using the NXP LS1088A SoC. This device tree only describes features which the mainline kernel currently has support for, such as some I2C-connected devices that are not described at present. System documentation may be found at ten64doc.traverse.com.au Signed-off-by: Mathew McBride <matt@traverse.com.au> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> # for the MAC/PHY Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14arm64: dts: ls1088a: add missing PMU nodeMathew McBride1-0/+5
The Performance Manager Unit was not described in the DTS which meant performance event monitoring was not possible. This was exposed by a change to the PMU handling in KVM in 5.11-rc3 which now prevents a PMU being exposed to a guest when the host does not provide one: "KVM: arm64: Don't access PMCR_EL0 when no PMU is available" Signed-off-by: Mathew McBride <matt@traverse.com.au> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.