aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/configs (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-09-30arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to yKeerthy1-1/+1
Commit 6334150e9a36 ("remoteproc: don't allow modular build") changes CONFIG_REMOTEPROC to a boolean from a tristate config option which inhibits all defconfigs marking CONFIG_REMOTEPROC as a module in compiling the remoteproc and dependent config options. So fix the configs to have CONFIG_REMOTEPROC built in. Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com Fixes: 6334150e9a36 ("remoteproc: don't allow modular build") Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Will Deacon <will@kernel.org> [olof: Fixed up all 4 occurrances in this one commit] Signed-off-by: Olof Johansson <olof@lixom.net>
2019-09-04arm64: defconfig: Enable Qualcomm QUSB2 PHYLee Jones1-0/+1
Tested on the Lenovo Yoga C630 where this patch enables USB. Without it USB devices are not enumerated. Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04arm64: defconfig: Enable the EFI FramebufferLee Jones1-0/+1
Tested on the Lenovo Yoga C630 where this patch enables the framebuffer (screen/monitor). Without it the device appears not to boot. Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04arm64: defconfig: Enable Qualcomm GENI based I2C controllerLee Jones1-0/+1
Tested on the Lenovo Yoga C630 where this patch enables the keyboard, touchpad and touchscreen. Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-04Merge tag 'qcom-arm64-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigArnd Bergmann1-0/+5
Qualcomm ARM64 Based defconfig Updates for v5.4 * Enable Qualcomm MSM8916 clock drivers * Add DRM_MSM to ARCH_QCOM defconfigs * Enable Qualcomm SM8150 clock and pinctrl drivers * tag 'qcom-arm64-defconfig-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: Enable CPU clock drivers for Qualcomm msm8916 arm64: defconfig: Add DRM_MSM to defconfigs with ARCH_QCOM arm64: defconfig: Enable SM8150 GCC and pinctrl driver
2019-09-04Merge tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfigArnd Bergmann1-0/+2
This pull request contains Broadcom ARM64-based SoCs defconfig updates for 5.4, please pull the following: - Nicolas enables the Raspberry Pi CPUFREQ driver in the ARM64 defconfig file * tag 'arm-soc/for-5.4/defconfig-arm64' of https://github.com/Broadcom/stblinux: arm64: defconfig: enable cpufreq support for RPi3
2019-09-03Merge tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfigArnd Bergmann1-0/+7
i.MX defconfig update for 5.4: - Enable pinctrl and clock driver support for i.MX8MN SoC. - Enable SDMA support for i.MX8MQ and i.MX8MM SoC, including FW_LOADER_USER_HELPER and FW_LOADER_USER_HELPER_FALLBACK to support SDMA firmware loading via udev. - Enable module build of i.MX8 DDR PMU driver and ETNAVIV GPU driver. - Enable module build of OV5645 camera driver in imx_v6_v7_defconfig. * tag 'imx-defconfig-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: CONFIG_DRM_ETNAVIV=m ARM: imx_v6_v7_defconfig: Select the OV5645 camera driver arm64: defconfig: Build imx8 ddr pmu as module arm64: defconfig: Select CONFIG_CLK_IMX8MN by default arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by default arm64: defconfig: Enable SDMA on i.mx8mq/8mm Link: https://lore.kernel.org/r/20190825153237.28829-7-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfigArnd Bergmann1-0/+2
Allwinner arm64 defconfig changes for 5.4 Two patches to enable the IR receiver and the SPDIF transceiver found on the Allwinner SoCs. * tag 'sunxi-config64-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: Enable Sun4i SPDIF module arm64: defconfig: Enable IR SUNXI option Link: https://lore.kernel.org/r/24f215ca-f3a8-4497-bf98-9ba1808b37be.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'arm64_defconfig_watchdog_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/defconfigArnd Bergmann1-0/+1
arm64 defconfig for v5.4 - Add CONFIG_DW_WATCHDOG to support the Designware watchdog driver * tag 'arm64_defconfig_watchdog_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: defconfig: Enable the DesignWare watchdog Link: https://lore.kernel.org/r/20190819141659.26414-2-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-03Merge tag 'hisi-arm64-defconfig-for-5.4' of git://github.com/hisilicon/linux-hisi into arm/defconfigArnd Bergmann1-0/+1
ARM64: hisilicon: defconfig updates for v5.4 - Enable ACPI_APEI_PCIEAER for the hisilicon D06 board to support PCIe AER error report * tag 'hisi-arm64-defconfig-for-5.4' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable CONFIG_ACPI_APEI_PCIEAER Link: https://lore.kernel.org/r/5D562573.5030604@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-01arm64: defconfig: Enable CPU clock drivers for Qualcomm msm8916Marc Gonzalez1-0/+2
QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the 'default ARCH_QCOM' directive. Add the two options explicitly in the arm64 defconfig, to avoid functional regressions. Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> [bjorn: Rewrote subject] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-09-01arm64: defconfig: Add DRM_MSM to defconfigs with ARCH_QCOMJordan Crouse1-0/+1
Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all ARCH_QCOM enabled defconfigs to restore the previous expected build behavior. I split this off from the original patch to separate out the ARM64 portions. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <agross@kernel.org>
2019-08-22arm64: defconfig: Enable SM8150 GCC and pinctrl driverVinod Koul1-0/+2
Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-16arm64: defconfig: Enable CONFIG_ACPI_APEI_PCIEAERZhou Wang1-0/+1
Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have been enabled in the default config. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2019-08-15arm64: defconfig: Enable the DesignWare watchdogDinh Nguyen1-0/+1
Enable the DesignWare watchdog driver that is present on the Intel Stratix10 and Agilex platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-08-14arm64: defconfig: Enable the PSCI CPUidle driverLorenzo Pieralisi1-0/+1
Enable the PSCI CPUidle driver to replace the functionality previously provided by the generic ARM CPUidle driver through CPU operations. Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.com Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12arm64: defconfig: Enable Sun4i SPDIF moduleClément Péron1-0/+1
Allwinner A64 and H6 use the Sun4i SPDIF driver. Enable this to allow a proper support. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-08-03arm64: defconfig: CONFIG_DRM_ETNAVIV=mChristian Gmeiner1-0/+1
For imx8 we want to enable etnaviv, let's enable it in defconfig, it will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-24arm64: defconfig: Enable IR SUNXI optionClément Péron1-0/+1
Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs can use their IR receiver controller. Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-07-23arm64: defconfig: enable cpufreq support for RPi3Nicolas Saenz Julienne1-0/+2
This enables both the new firmware clock driver and cpufreq driver available for the RPi3 family of boards. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
2019-07-22arm64: defconfig: Build imx8 ddr pmu as moduleLeonard Crestez1-0/+1
This is available on all imx8 but is not "boot critical" in any way so build as a module. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22arm64: defconfig: Select CONFIG_CLK_IMX8MN by defaultAnson Huang1-0/+1
Enable CONFIG_CLK_IMX8MN to support i.MX8MN clock driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22arm64: defconfig: Select CONFIG_PINCTRL_IMX8MN by defaultAnson Huang1-0/+1
Enable CONFIG_PINCTRL_IMX8MN by default to support i.MX8MN pinctrl driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-22arm64: defconfig: Enable SDMA on i.mx8mq/8mmRobin Gong1-0/+3
Enable SDMA support on i.mx8mq/8mm chips, including enabling CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK for firmware loaded by udev. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-19Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+43
Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: configs: multi_v5: Remove duplicate ASPEED options arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT defconfig: arm64: enable i.MX8 SCU octop driver arm64: defconfig: Add i.MX SCU SoC info driver arm64: defconfig: Enable CONFIG_QORIQ_THERMAL ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR arm64: defconfig: ARM_IMX_CPUFREQ_DT=m ARM: imx_v6_v7_defconfig: Add TPM PWM support by default ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m ARM: multi_v7_defconfig: enable STMFX pinctrl support arm64 defconfig: enable LVM support ARM: configs: multi_v5: Add more ASPEED devices arm64: defconfig: Add Tegra194 PCIe driver ARM: configs: aspeed: Add new drivers ARM: exynos_defconfig: Enable Panfrost and Lima drivers ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers arm64 defconfig: enable Mellanox cards ...
2019-07-19Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-0/+1
Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ...
2019-07-08Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-0/+1
Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-06-26Merge tag 'imx-defconfig-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfigOlof Johansson1-0/+17
i.MX defconfig changes for 5.3: * imx_v6_v7_defconfig: - PCF857X GPIO expander - SIOX bus driver - thermal statistics - TPM PWM driver - OV2680 camera driver - SNVS LPGPR NVMEM driver - i.MX DT based cpufreq driver * arm64 defconfig built-in: - i.MX8MM pinctrl and clock - i.MX LPI2C driver - ROHM_BD718XX PMIC - OCOTP NVMEM support - i.MX SCU based SoC bus driver * arm64 defconfig modules: - i.MX SPI driver - i.MX system controller watchdog - SNVS RTC driver - ISL29018 light and proximity sensor driver - MPL3115 pressure sensor driver - i.MX8 DT based cpufreq support - QorIQ Thermal Monitoring Unit driver - SNVS power key driver * tag 'imx-defconfig-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT defconfig: arm64: enable i.MX8 SCU octop driver arm64: defconfig: Add i.MX SCU SoC info driver arm64: defconfig: Enable CONFIG_QORIQ_THERMAL ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR arm64: defconfig: ARM_IMX_CPUFREQ_DT=m ARM: imx_v6_v7_defconfig: Add TPM PWM support by default ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m arm64: defconfig: Enable ROHM_BD718XX PMIC for imx8mm-evk arm64: defconfig: Enable lpi2c for imx8qxp and sensors arm64: defconfig: Enable imx8mm clk/pinctrl arm64: defconfig: Enable RTC_DRV_SNVS arm64: defconfig: add support for i.MX system controller watchdog ARM: imx_v6_v7_defconfig: Enable SIOX bus ARM: imx_v6_v7_defconfig: Add GPIO_PCF857X arm64: defconfig: Enable CONFIG_SPI_IMX Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26Merge tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfigOlof Johansson1-0/+3
Our usual bunch of arm64 defconfig changes, this time mostly to enable some missing drivers for the Allwinner A64. * tag 'sunxi-config64-for-5.3-201906210813' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: enable Allwinner DMA drivers arm64: defconfig: enable sunxi watchdog arm64: defconfig: add allwinner sid support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-26arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as moduleAnson Huang1-0/+1
Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M series SoCs' power key. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-26defconfig: arm64: enable i.MX8 SCU octop driverPeng Fan1-0/+1
Build in CONFIG_NVMEM_IMX_OCOTP_SCU. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <andy.gross@linaro.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Olof Johansson <olof@lixom.net> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: linux-arm-kernel@lists.infradead.org Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-26arm64: defconfig: Add i.MX SCU SoC info driverAnson Huang1-0/+1
This patch selects CONFIG_IMX_SCU_SOC by default to support i.MX system controller unit SoC info driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-26arm64: defconfig: Enable CONFIG_QORIQ_THERMALAnson Huang1-0/+1
i.MX8MQ needs CONFIG_QORIQ_THERMAL for thermal support. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-26arm64: defconfig: ARM_IMX_CPUFREQ_DT=mLeonard Crestez1-0/+1
For imx8m we need a separate small driver to read "speed grading" information from fuses and determine which OPPs are supported. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-26arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8mLeonard Crestez1-0/+1
Enable imx-ocotp nvmem driver for fuse access on imx8m family. The fuse block stores various system information which will be accessed by client device drivers, e.g. cpufreq driver needs to access fuse for CPU speed grading setting. So this nvmem driver gets enabled as built-in. Tested on imx8mm-evk. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-25Merge tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigOlof Johansson1-0/+2
arm64: tegra: Default configuration changes for v5.3-rc1 This enables the INA3221 power monitoring driver that is used on many of the Jetson boards as well as Tegra194 PCIe support. * tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Add Tegra194 PCIe driver arm64: defconfig: Add HWMON INA3221 support Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'renesas-arm64-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfigOlof Johansson1-0/+3
Renesas ARM64 Based SoC Defconfig Updates for v5.3 Enable as modules: * TYPEC_HD3SS3220 B Type-C DRP Port controller driver * TDA19988 HDMI encoder driver * tag 'renesas-arm64-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: enable TYPEC_HD3SS3220 config option arm64: defconfig: Enable TDA19988 Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25arm64 defconfig: enable LVM supportMarcin Juszkiewicz1-0/+5
W dniu 19.06.2019 o 16:21, Olof Johansson pisze: > On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote: >> Follow x86-64 defconfig on enabling basic LVM support. >> >> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> > > Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that > will hold modules. Right. Forgot to change. From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Date: Mon, 27 May 2019 20:14:34 +0200 Subject: [PATCH 1/3] arm64 defconfig: enable LVM support Follow x86-64 defconfig on enabling basic LVM support. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25arm64: defconfig: enable CONFIG_RANDOMIZE_BASENick Desaulniers1-0/+1
For testing coverage and improved defense in depth, enable KASLR by default. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-20arm64: defconfig: Add Tegra194 PCIe driverVidya Sagar1-0/+1
Add PCIe host controller driver for DesignWare core based PCIe controller IP present in Tegra194. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-06-19arm64 defconfig: enable Mellanox cardsMarcin Juszkiewicz1-0/+9
Mellanox cards are present in several AArch64 servers. Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19arm64 defconfig: enable MPT3 SAS and BNX2X driversMarcin Juszkiewicz1-0/+2
ThunderX2 server requires both to provide storage and network. 05:00.0 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 05:00.1 Ethernet controller [0200]: Broadcom Limited BCM57840 NetXtreme II 10 Gigabit Ethernet [14e4:16a1] (rev 11) 8d:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS3224 PCI-Express Fusion-MPT SAS-3 [1000:00c4] (rev 01) Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19arm64: defconfig: enable Lima driverNeil Armstrong1-0/+1
A bunch of arm64 boards can now use the Lima driver, let's enable it in defconfig, it will be useful to have it enabled for KernelCI boot and runtime testing. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19arm64: defconfig: add Panfrost driverTomeu Vizoso1-0/+1
With the goal of making it easier for CI services such as KernelCI to run tests for it. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19arm64: configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski1-1/+0
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-19arm64: defconfig: Enable TI's J721E SoC platformNishanth Menon1-0/+1
Enable J721E SoC support from TI. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-06-18arm64: defconfig: Enable FSL_EDMA driverLi Yang1-0/+1
Enables the FSL EDMA driver by default. This also works around an issue that imx-i2c driver keeps deferring the probe because of the DMA is not ready. And currently the DMA engine framework can not correctly tell if the DMA channels will truly become available later (it will never be available if the DMA driver is not enabled). This will cause indefinite messages like below: [ 3.335829] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported [ 3.344455] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm) [ 3.350917] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 3.362089] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported [ 3.370741] ina2xx 0-0040: power monitor ina220 (Rshunt = 1000 uOhm) [ 3.377205] lm90 0-004c: 0-004c supply vcc not found, using dummy regulator [ 3.388455] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported ..... Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-14arm64: defconfig: Add HWMON INA3221 supportNicolin Chen1-0/+1
Tegra186 board under arm64 is using this device, according to its dts file. So this patch enables its driver with a "=m" as the other HWMON drivers. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-06-12arm64: defconfig: enable TYPEC_HD3SS3220 config optionBiju Das1-0/+2
Enable support for the TI HD3SS320 USB Type-C DRP Port controller driver by turning on CONFIG_TYPEC and CONFIG_TYPEC_HD3SS3220 as modules. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-11arm64: defconfig: enable Allwinner DMA driversClément Péron1-0/+1
Allwinner sun6i DMA drivers is used on A64 and H6 boards. Enable it as a module. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.