aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/include
AgeCommit message (Collapse)AuthorFilesLines
2013-06-29consolidate io_remap_pfn_range definitionsAl Viro1-7/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-20arm64: Add defines for APM ARMv8 implementationVinayak Kale1-0/+3
This patch adds defines for APM CPU implementer ID and APM CPU part numbers in asm/cputype.h Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14ARM64: mm: THP support.Steve Capper4-0/+67
Bring Transparent HugePage support to ARM. The size of a transparent huge page depends on the normal page size. A transparent huge page is always represented as a pmd. If PAGE_SIZE is 4KB, THPs are 2MB. If PAGE_SIZE is 64KB, THPs are 512MB. Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14ARM64: mm: HugeTLB support.Steve Capper3-2/+136
Add huge page support to ARM64, different huge page sizes are supported depending on the size of normal pages: PAGE_SIZE is 4KB: 2MB - (pmds) these can be allocated at any time. 1024MB - (puds) usually allocated on bootup with the command line with something like: hugepagesz=1G hugepages=6 PAGE_SIZE is 64KB: 512MB - (pmds) usually allocated on bootup via command line. Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14ARM64: mm: Move PTE_PROT_NONE bit.Steve Capper1-12/+12
Under ARM64, PTEs can be broadly categorised as follows: - Present and valid: Bit #0 is set. The PTE is valid and memory access to the region may fault. - Present and invalid: Bit #0 is clear and bit #1 is set. Represents present memory with PROT_NONE protection. The PTE is an invalid entry, and the user fault handler will raise a SIGSEGV. - Not present (file or swap): Bits #0 and #1 are clear. Memory represented has been paged out. The PTE is an invalid entry, and the fault handler will try and re-populate the memory where necessary. Huge PTEs are block descriptors that have bit #1 clear. If we wish to represent PROT_NONE huge PTEs we then run into a problem as there is no way to distinguish between regular and huge PTEs if we set bit #1. To resolve this ambiguity this patch moves PTE_PROT_NONE from bit #1 to bit #2 and moves PTE_FILE from bit #2 to bit #3. The number of swap/file bits is reduced by 1 as a consequence, leaving 60 bits for file and swap entries. Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14ARM64: mm: Make PAGE_NONE pages read only and no-execute.Steve Capper1-2/+2
If we consider the following code sequence: my_pte = pte_modify(entry, myprot); x = pte_write(my_pte); y = pte_exec(my_pte); If myprot comes from a PROT_NONE page, then x and y will both be true which is undesireable behaviour. This patch sets the no-execute and read-only bits for PAGE_NONE such that the code above will return false for both x and y. Signed-off-by: Steve Capper <steve.capper@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-12Merge branch 'kvm-arm64/kvm-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into upstreamCatalin Marinas12-0/+1209
* 'kvm-arm64/kvm-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms: (33 commits) arm64: KVM: document kernel object mappings in HYP arm64: KVM: MAINTAINERS update arm64: KVM: userspace API documentation arm64: KVM: enable initialization of a 32bit vcpu arm64: KVM: 32bit guest fault injection arm64: KVM: 32bit specific register world switch arm64: KVM: CPU specific 32bit coprocessor access arm64: KVM: 32bit handling of coprocessor traps arm64: KVM: 32bit conditional execution emulation arm64: KVM: 32bit GP register access arm64: KVM: define 32bit specific registers arm64: KVM: Build system integration arm64: KVM: PSCI implementation arm64: KVM: Plug the arch timer ARM: KVM: timer: allow DT matching for ARMv8 cores arm64: KVM: Plug the VGIC arm64: KVM: Exit handling arm64: KVM: HYP mode world switch implementation arm64: KVM: hypervisor initialization code arm64: KVM: guest one-reg interface ... Conflicts: arch/arm64/Makefile
2013-06-12arm64: KVM: enable initialization of a 32bit vcpuMarc Zyngier2-1/+2
Wire the init of a 32bit vcpu by allowing 32bit modes in pstate, and providing sensible defaults out of reset state. This feature is of course conditioned by the presence of 32bit capability on the physical CPU, and is checked by the KVM_CAP_ARM_EL1_32BIT capability. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit handling of coprocessor trapsMarc Zyngier1-0/+5
Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit conditional execution emulationMarc Zyngier1-2/+11
As conditional instructions can trap on AArch32, add the thinest possible emulation layer to keep 32bit guests happy. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit GP register accessMarc Zyngier1-1/+14
Allow access to the 32bit register file through the usual API. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: define 32bit specific registersMarc Zyngier3-3/+47
Define the 32bit specific registers (SPSRs, cp15...). Most CPU registers are directly mapped to a 64bit register (r0->x0...). Only the SPSRs have separate registers. cp15 registers are also mapped into their 64bit counterpart in most cases. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: PSCI implementationMarc Zyngier3-1/+40
Wire the PSCI backend into the exit handling code. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12Merge tag 'xen-arm64-3.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen into upstreamCatalin Marinas8-0/+59
Introduce Xen support to ARM64 * tag 'xen-arm64-3.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/sstabellini/xen: MAINTAINERS: add myself as arm64/xen maintainer arm64/xen: introduce CONFIG_XEN and hypercall.S on ARM64 arm64/xen: use XEN_IO_PROTO_ABI_ARM on ARM64 arm64/xen: implement ioremap_cached on arm64 arm64/xen: introduce asm/xen header files on arm64 arm/xen: define xen_remap as ioremap_cached
2013-06-12arm64: debug: consolidate software breakpoint handlersWill Deacon2-2/+9
The software breakpoint handlers are hooked in directly from ptrace, which makes it difficult to add additional handlers for things like kprobes and kgdb. This patch moves the handling code into debug-monitors.c, where we can dispatch to different debug subsystems more easily. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-11arm64: device: add iommu pointer to device archdataWill Deacon1-0/+3
When using an IOMMU for device mappings, it is necessary to keep a pointer between the device and the IOMMU to which it is attached in order to obtain the correct IOMMU when attaching the device to a domain. This patch adds an iommu pointer to the dev_archdata structure, in a similar manner to other architectures (ARM, PowerPC, x86, ...). Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-11arm64: pgtable: use pte_index instead of __pte_indexWill Deacon1-2/+2
pte_index is a useful helper outside of arch/arm64, for things like the ARM SMMU driver, so rename __pte_index to pte_index to be consistent with both arch/arm/ and also the definitions of pmd_index and pgd_index. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-10arm64: kernel: compiling issue, need delete read_current_timer()Chen Gang1-3/+3
Under arm64, we will calibrate the delay loop statically using a known timer frequency, so delete read_current_timer(), or it will cause compiling issue with allmodconfig. The related error: ERROR: "read_current_timer" [lib/rbtree_test.ko] undefined! ERROR: "read_current_timer" [lib/interval_tree_test.ko] undefined! ERROR: "read_current_timer" [fs/ext4/ext4.ko] undefined! ERROR: "read_current_timer" [crypto/tcrypt.ko] undefined! Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-07arm64: mm: don't bother invalidating the icache in switch_mmWill Deacon1-6/+0
We don't support software broadcast of cache maintenance operations, so this flush is not required (__sync_icache_dcache will always affect all CPUs). Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-07arm64: spinlock: retry trylock operation if strex fails on free lockCatalin Marinas1-1/+2
An exclusive store instruction may fail for reasons other than lock contention (e.g. a cache eviction during the critical section) so, in line with other architectures using similar exclusive instructions (alpha, mips, powerpc), retry the trylock operation if the lock appears to be free but the strex reported failure. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Tony Thompson <anthony.thompson@arm.com> Acked-by: Will Deacon <will.deacon@arm.com>
2013-06-07arm64: Remove __flush_dcache_page()Catalin Marinas1-3/+0
This function is only used in __sync_icache_dcache(), so remove it and call __flush_dcache_area() directly. The flush_icache_user_range() function is not used in the arm64 kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Will Deacon <will.deacon@arm.com> Acked-by: Will Deacon <will.deacon@arm.com>
2013-06-07arm64: Provide default implementation for dma_{alloc,free}_attrsDamian Hobson-Garcia1-6/+11
Most architectures that define CONFIG_HAS_DMA, have implementations for both dma_alloc_attrs() and dma_free_attrs(). All achitectures that do not define CONFIG_HAS_DMA also have both of these definitions provided by dma-mapping-broken.h. Add default implementations for these functions on arm64. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-07arm64: KVM: hypervisor initialization codeMarc Zyngier1-0/+13
Provide EL2 with page tables and stack, and set the vectors to point to the full blown world-switch code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: MMIO access backendMarc Zyngier1-0/+59
Define the necessary structures to perform an MMIO access. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: kvm_arch and kvm_vcpu_arch definitionsMarc Zyngier1-0/+186
Provide the architecture dependent structures for VM and vcpu abstractions. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: system register handlingMarc Zyngier2-0/+80
Provide 64bit system register handling, modeled after the cp15 handling for ARM. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: user space interfaceMarc Zyngier1-0/+117
Provide the kvm.h file that defines the user space visible interface. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: architecture specific MMU backendMarc Zyngier1-0/+135
Define the arm64 specific MMU backend: - HYP/kernel VA offset - S2 4/64kB definitions - S2 page table populating and flushing - icache cleaning Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: Basic ESR_EL2 helpers and vcpu register accessMarc Zyngier1-0/+158
Implements helpers for dealing with the EL2 syndrome register as well as accessing the vcpu registers. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: system register definitions for 64bit guestsMarc Zyngier1-0/+68
Define the saved/restored registers for 64bit guests. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: EL2 register definitionsMarc Zyngier1-0/+245
Define all the useful bitfields for EL2 registers. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64: KVM: define HYP and Stage-2 translation page flagsMarc Zyngier3-0/+37
Add HYP and S2 page flags, for both normal and device memory. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-07arm64/xen: implement ioremap_cached on arm64Stefano Stabellini1-0/+2
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2013-06-07arm64/xen: introduce asm/xen header files on arm64Stefano Stabellini7-0/+57
asm/xen/hypercall.h, asm/xen/hypervisor.h, asm/xen/interface.h and asm/xen/page.h are identical so to avoid code duplication we are just including the original arm header files here. asm/xen/events.h is slightly different, so introduce a different file here (use xchg to implement xchg_xen_ulong and pass regs->pstate to raw_irqs_disabled_flags). Also introduce asm/hypervisor.h and asm/sync_bitops.h. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2013-06-07clocksource: arch_timer: use virtual countersMark Rutland1-10/+0
Switching between reading the virtual or physical counters is problematic, as some core code wants a view of time before we're fully set up. Using a function pointer and switching the source after the first read can make time appear to go backwards, and having a check in the read function is an unfortunate block on what we want to be a fast path. Instead, this patch makes us always use the virtual counters. If we're a guest, or don't have hyp mode, we'll use the virtual timers, and as such don't care about CNTVOFF as long as it doesn't change in such a way as to make time appear to travel backwards. As the guest will use the virtual timers, a (potential) KVM host must use the physical timers (which can wake up the host even if they fire while a guest is executing), and hence a host must have CNTVOFF set to zero so as to have a consistent view of time between the physical timers and virtual counters. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rob Herring <rob.herring@calxeda.com>
2013-05-28arm64: uaccess s/might_sleep/might_fault/Michael S. Tsirkin1-2/+2
The only reason uaccess routines might sleep is if they fault. Make this explicit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1369577426-26721-2-git-send-email-mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-17arm64: debug: fix mdscr.ss check when enabling debug exceptionsWill Deacon1-1/+1
When we take an exception at EL1, we only want to enable debug exceptions if we're not currently stepping, otherwise we can easily get stuck in a loop stepping into interrupt handlers. Unfortunately, the current code tests the wrong bit in the mdscr, so fix that. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-05-10Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signalLinus Torvalds1-1/+1
Pull stray syscall bits from Al Viro: "Several syscall-related commits that were missing from the original" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: switch compat_sys_sysctl to COMPAT_SYSCALL_DEFINE unicore32: just use mmap_pgoff()... unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINE x86, vm86: fix VM86 syscalls: use SYSCALL_DEFINEx(...)
2013-05-09unify compat fanotify_mark(2), switch to COMPAT_SYSCALL_DEFINEAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-08Merge tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds1-1/+1
Pull arm64 update from Catalin Marinas: - Since drivers/irqchip/irq-gic.c no longer has dependencies on arm32 specifics (the 'gic' branch merged), it can be enabled on arm64. - Enable arm64 support for poweroff/restart (for code under drivers/power/reset/). - Fixes (dts file, exception handling, bitops) * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Treat the bitops index argument as an 'int' arm64: Ignore the 'write' ESR flag on cache maintenance faults arm64: dts: fix #address-cells for foundation-v8 arm64: vexpress: Add support for poweroff/restart arm64: Enable support for the ARM GIC interrupt controller
2013-05-08arm64: vexpress: Add support for poweroff/restartCatalin Marinas1-1/+1
This patch adds the arm_pm_poweroff definition expected by the vexpress-poweroff.c driver and enables the latter for arm64. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2013-05-07Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+5
Pull ARM SoC late cleanups from Arnd Bergmann: "These are cleanups and smaller changes that either depend on earlier feature branches or came in late during the development cycle. We normally try to get all cleanups early, so these are the exceptions: - A follow-up on the clocksource reworks, hopefully the last time we need to merge clocksource subsystem changes through arm-soc. A first set of patches was part of the original 3.10 arm-soc cleanup series because of interdependencies with timer drivers now moved out of arch/arm. - Migrating the SPEAr13xx platform away from using auxdata for DMA channel descriptions towards using information in device tree, based on the earlier SPEAr multiplatform series - A few follow-ups on the Atmel SAMA5 support and other changes for Atmel at91 based on the larger at91 reworks. - Moving the armada irqchip implementation to drivers/irqchip - Several OMAP cleanups following up on the larger series already merged in 3.10." * tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: OMAP4: change the device names in usb_bind_phy ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a ARM: SPEAr: conditionalize SMP code ARM: arch_timer: Silence debug preempt warnings ARM: OMAP: remove unused variable serial: amba-pl011: fix !CONFIG_DMA_ENGINE case ata: arasan: remove the need for platform_data ARM: at91/sama5d34ek.dts: remove not needed compatibility string ARM: at91: dts: add MCI DMA support ARM: at91: dts: add i2c dma support ARM: at91: dts: set #dma-cells to the correct value ARM: at91: suspend both memory controllers on at91sam9263 irqchip: armada-370-xp: slightly cleanup irq controller driver irqchip: armada-370-xp: move IRQ handler to avoid forward declaration irqchip: move IRQ driver for Armada 370/XP ARM: mvebu: move L2 cache initialization in init_early() devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ...
2013-04-25arm64: Fix compat types affecting struct compat_statCatalin Marinas1-9/+13
The compat_stat structure doesn't match the arch/arm/ struct stat definition. This patch fixes the compat types and struct compat_stat definition accordingly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com>
2013-04-25arm64: compiling issue, need add include/asm/vga.h fileChen Gang1-0/+1
For compiling with allmodconfig, need vga.h file, so generate it which just only include the asm-generic one. It is firstly used by drivers/gpu/drm/drm_irq.c. The related error: include/video/vga.h:22:21: fatal error: asm/vga.h: No such file or directory Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-23arm64: Define cmpxchg64 and cmpxchg64_local for outside useChen Gang1-0/+3
Drivers use cmpxchg64, cmpxchg64_local to perform 64-bit operation, so they can cross 32-bit and 64-bit platforms (it is a standard way). Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-19arm64: Define readq and writeq for driver module usingChen Gang1-0/+4
when compiling with allmodconfig, CONFIG_64BIT=y the file drivers/base/regmap/regmap-mmio.c will use readq and writeq so we need implement these functions. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-17Merge tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux into late/clksrcOlof Johansson1-0/+5
This is the 2nd part of ARM timer clean-ups for 3.10. This series has the following changes: - Add sched_clock selection logic to select the highest frequency clock - Use full 64-bit arch timer counter for sched_clock - Convert arch timer, sp804 and integrator-cp timers to CLKSRC_OF and adapt all users to use clocksource_of_init * tag 'clksrc-cleanup-for-3.10-part2' of git://sources.calxeda.com/kernel/linux: devtree: add binding documentation for sp804 ARM: integrator-cp: convert use CLKSRC_OF for timer init ARM: versatile: use OF init for sp804 timer ARM: versatile: add versatile dtbs to dtbs target ARM: vexpress: remove extra timer-sp control register clearing ARM: dts: vexpress: disable CA9 core tile sp804 timer ARM: vexpress: remove sp804 OF init ARM: highbank: use OF init for sp804 timer ARM: timer-sp: convert to use CLKSRC_OF init OF: add empty of_device_is_available for !OF ARM: convert arm/arm64 arch timer to use CLKSRC_OF init ARM: make machine_desc->init_time default to clocksource_of_init ARM: arch_timer: use full 64-bit counter for sched_clock ARM: make sched_clock just call a function pointer ARM: sched_clock: allow changing to higher frequency counter Signed-off-by: Olof Johansson <olof@lixom.net> This has a nasty set of conflicts with the exynos MCT code, which was moved in a separate branch, and then fixed up when merged in, but still conflicts a bit here. It should have been sorted out by this merge though.
2013-04-17arm64: add explicit symbols to ESR_EL1 decodingMarc Zyngier1-0/+55
The ESR_EL1 decoding process is a bit cryptic, and KVM has also a need for the same constants. Add a new esr.h file containing the appropriate exception classes constants, and change entry.S to use it. Fix a small bug in the EL1 breakpoint check while we're at it. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-11ARM: convert arm/arm64 arch timer to use CLKSRC_OF initRob Herring1-0/+5
This converts arm and arm64 to use CLKSRC_OF DT based initialization for the arch timer. A new function arch_timer_arch_init is added to allow for arch specific setup. This has a side effect of enabling sched_clock on omap5 and exynos5. There should not be any reason not to use the arch timers for sched_clock. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-sh@vger.kernel.org Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2013-03-28Merge branch 'arm64-klib' into upstreamCatalin Marinas3-3/+53
* arm64-klib: arm64: klib: Optimised atomic bitops arm64: klib: Optimised string functions arm64: klib: Optimised memory functions
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.