aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/mm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08arm64: memblock: don't permit memblock resizing until linear mapping is upArd Biesheuvel2-2/+2
Bhupesh reports that having numerous memblock reservations at early boot may result in the following crash: Unable to handle kernel paging request at virtual address ffff80003ffe0000 ... Call trace: __memcpy+0x110/0x180 memblock_add_range+0x134/0x2e8 memblock_reserve+0x70/0xb8 memblock_alloc_base_nid+0x6c/0x88 __memblock_alloc_base+0x3c/0x4c memblock_alloc_base+0x28/0x4c memblock_alloc+0x2c/0x38 early_pgtable_alloc+0x20/0xb0 paging_init+0x28/0x7f8 This is caused by the fact that we permit memblock resizing before the linear mapping is up, and so the memblock_reserved() array is moved into memory that is not mapped yet. So let's ensure that this crash can no longer occur, by deferring to call to memblock_allow_resize() to after the linear mapping has been created. Reported-by: Bhupesh Sharma <bhsharma@redhat.com> Acked-by: Will Deacon <will.deacon@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-02arm64: fix warnings without CONFIG_IOMMU_DMAChristoph Hellwig1-0/+2
__swiotlb_get_sgtable_page and __swiotlb_mmap_pfn are not only misnamed but also only used if CONFIG_IOMMU_DMA is set. Just add a simple ifdef for now, given that we plan to remove them entirely for the next merge window. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Will Deacon <will.deacon@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport4-4/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename free_all_bootmem to memblock_free_allMike Rapoport1-1/+1
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace free_bootmem{_node} with memblock_freeMike Rapoport1-1/+1
The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport2-2/+2
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*Mike Rapoport2-2/+2
Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26Merge tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-209/+48
Pull more dma-mapping updates from Christoph Hellwig: - various swiotlb cleanups - do not dip into the ѕwiotlb pool for dma coherent allocations - add support for not cache coherent DMA to swiotlb - switch ARM64 to use the generic swiotlb_dma_ops * tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mapping: arm64: use the generic swiotlb_dma_ops swiotlb: add support for non-coherent DMA swiotlb: don't dip into swiotlb pool for coherent allocations swiotlb: refactor swiotlb_map_page swiotlb: use swiotlb_map_page in swiotlb_map_sg_attrs swiotlb: merge swiotlb_unmap_page and unmap_single swiotlb: remove the overflow buffer swiotlb: do not panic on mapping failures swiotlb: mark is_swiotlb_buffer static swiotlb: remove a pointless comment
2018-10-26Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds1-5/+5
Pull IOMMU updates from Joerg Roedel: - Debugfs support for the Intel VT-d driver. When enabled, it now also exposes some of its internal data structures to user-space for debugging purposes. - ARM-SMMU driver now uses the generic deferred flushing and fast-path iova allocation code. This is expected to be a major performance improvement, as this allocation path scales a lot better. - Support for r8a7744 in the Renesas iommu driver - Couple of minor fixes and improvements all over the place * tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits) iommu/arm-smmu-v3: Remove unnecessary wrapper function iommu/arm-smmu-v3: Add SPDX header iommu/amd: Add default branch in amd_iommu_capable() dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support iommu/amd: Move iommu_init_pci() to .init section iommu/arm-smmu: Support non-strict mode iommu/io-pgtable-arm-v7s: Add support for non-strict mode iommu/arm-smmu-v3: Add support for non-strict mode iommu/io-pgtable-arm: Add support for non-strict mode iommu: Add "iommu.strict" command line option iommu/dma: Add support for non-strict mode iommu/arm-smmu: Ensure that page-table updates are visible before TLBI iommu/arm-smmu-v3: Implement flush_iotlb_all hook iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout iommu/io-pgtable-arm: Fix race handling in split_blk_unmap() iommu/arm-smmu-v3: Fix a couple of minor comment typos iommu: Fix a typo iommu: Remove .domain_{get,set}_windows iommu: Tidy up window attributes ...
2018-10-24Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-61/+33
Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-22Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds8-63/+66
Pull arm64 updates from Catalin Marinas: "Apart from some new arm64 features and clean-ups, this also contains the core mmu_gather changes for tracking the levels of the page table being cleared and a minor update to the generic compat_sys_sigaltstack() introducing COMPAT_SIGMINSKSZ. Summary: - Core mmu_gather changes which allow tracking the levels of page-table being cleared together with the arm64 low-level flushing routines - Support for the new ARMv8.5 PSTATE.SSBS bit which can be used to mitigate Spectre-v4 dynamically without trapping to EL3 firmware - Introduce COMPAT_SIGMINSTKSZ for use in compat_sys_sigaltstack - Optimise emulation of MRS instructions to ID_* registers on ARMv8.4 - Support for Common Not Private (CnP) translations allowing threads of the same CPU to share the TLB entries - Accelerated crc32 routines - Move swapper_pg_dir to the rodata section - Trap WFI instruction executed in user space - ARM erratum 1188874 workaround (arch_timer) - Miscellaneous fixes and clean-ups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits) arm64: KVM: Guests can skip __install_bp_hardening_cb()s HYP work arm64: cpufeature: Trap CTR_EL0 access only where it is necessary arm64: cpufeature: Fix handling of CTR_EL0.IDC field arm64: cpufeature: ctr: Fix cpu capability check for late CPUs Documentation/arm64: HugeTLB page implementation arm64: mm: Use __pa_symbol() for set_swapper_pgd() arm64: Add silicon-errata.txt entry for ARM erratum 1188873 Revert "arm64: uaccess: implement unsafe accessors" arm64: mm: Drop the unused cpu parameter MAINTAINERS: fix bad sdei paths arm64: mm: Use #ifdef for the __PAGETABLE_P?D_FOLDED defines arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.c arm64: xen: Use existing helper to check interrupt status arm64: Use daifflag_restore after bp_hardening arm64: daifflags: Use irqflags functions for daifflags arm64: arch_timer: avoid unused function warning arm64: Trap WFI executed in userspace arm64: docs: Document SSBS HWCAP arm64: docs: Fix typos in ELF hwcaps arm64/kprobes: remove an extra semicolon in arch_prepare_kprobe ...
2018-10-19arm64: use the generic swiotlb_dma_opsChristoph Hellwig1-207/+46
Now that the generic swiotlb code supports non-coherent DMA we can switch to it for arm64. For that we need to refactor the existing alloc/free/mmap/pgprot helpers to be used as the architecture hooks, and implement the standard arch_sync_dma_for_{device,cpu} hooks for cache maintaincance in the streaming dma hooks, which also implies using the generic dma_coherent flag in struct device. Note that we need to keep the old is_device_dma_coherent function around for now, so that the shared arm/arm64 Xen code keeps working. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-19swiotlb: don't dip into swiotlb pool for coherent allocationsChristoph Hellwig1-3/+3
All architectures that support swiotlb also have a zone that backs up these less than full addressing allocations (usually ZONE_DMA32). Because of that it is rather pointless to fall back to the global swiotlb buffer if the normal dma direct allocation failed - the only thing this will do is to eat up bounce buffers that would be more useful to serve streaming mappings. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-10-19swiotlb: remove the overflow bufferChristoph Hellwig1-1/+1
Like all other dma mapping drivers just return an error code instead of an actual memory buffer. The reason for the overflow buffer was that at the time swiotlb was invented there was no way to check for dma mapping errors, but this has long been fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2018-10-10arm64: mm: Use __pa_symbol() for set_swapper_pgd()James Morse1-1/+1
commit 2330b7ca78350efcb ("arm64/mm: use fixmap to modify swapper_pg_dir") modifies the swapper_pg_dir via the fixmap as the kernel page tables have been moved to a read-only part of the kernel mapping. Using __pa() to setup the fixmap causes CONFIG_DEBUG_VIRTUAL to fire, as this function is used on the kernel-image swapper address. The in_swapper_pgdir() test before each call of this function means set_swapper_pgd() will only ever be called when pgdp points somewhere in the kernel-image mapping of swapper_pd_dir. Use __pa_symbol(). Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Jun Yao <yaojun8558363@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-10Merge branches 'arm/renesas', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'core' into nextJoerg Roedel1-5/+5
2018-10-09arm64: mm: Drop the unused cpu parameterShaokun Zhang1-4/+4
Cpu parameter is never used in flush_context, remove it. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-05arm64: Fix typo in a comment in arch/arm64/mm/kasan_init.cKyrylo Tkachov1-1/+1
"bellow" -> "below" The recommendation from kegel.com/kerspell is to only fix the howlers. "Bellow" is a synonym of "howl" so this should be appropriate. Signed-off-by: Kyrylo Tkachov <kyrylo.tkachov@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-03arm64: Use daifflag_restore after bp_hardeningJulien Thierry1-2/+3
For EL0 entries requiring bp_hardening, daif status is kept at DAIF_PROCCTX_NOIRQ until after hardening has been done. Then interrupts are enabled through local_irq_enable(). Before using local_irq_* functions, daifflags should be properly restored to a state where IRQs are enabled. Enable IRQs by restoring DAIF_PROCCTX state after bp hardening. Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-01arm64/numa: Unify common error path in numa_init()Anshuman Khandual1-4/+7
At present numa_free_distance() is being called before numa_distance is even initialized with numa_alloc_distance() which is really pointless. Instead lets call numa_free_distance() on the common error path inside numa_init() after numa_alloc_distance() has been successful. Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms") Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-01arm64/numa: Report correct memblock range for the dummy nodeAnshuman Khandual1-1/+1
The dummy node ID is marked into all memory ranges on the system. So the dummy node really extends the entire memblock.memory. Hence report correct extent information for the dummy node using memblock range helper functions instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)]. Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms") Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-01arm64/mm: Define esr_to_debug_fault_info()Anshuman Khandual1-1/+7
fault_info[] and debug_fault_info[] are static arrays defining memory abort exception handling functions looking into ESR fault status code encodings. As esr_to_fault_info() is already available providing fault_info[] array lookup, it really makes sense to have a corresponding debug_fault_info[] array lookup function as well. This just adds an equivalent helper function esr_to_debug_fault_info(). Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-01arm64/mm: Reorganize arguments for is_el1_permission_fault()Anshuman Khandual1-5/+4
Most memory abort exception handling related functions have the arguments in the order (addr, esr, regs) except is_el1_permission_fault(). This changes the argument order in this function as (addr, esr, regs) like others. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-10-01arm64/mm: Use ESR_ELx_FSC macro while decoding fault exceptionAnshuman Khandual1-1/+1
Just replace hard code value of 63 (0x111111) with an existing macro ESR_ELx_FSC when parsing for the status code during fault exception. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-27signal/arm64: Add and use arm64_force_sig_mceerr as appropriateEric W. Biederman1-7/+2
Add arm64_force_sig_mceerr for consistency with arm64_force_sig_fault, and use it in the one location that can take advantage of it. This removes the fiddly filling out of siginfo before sending a signal reporting an memory error to userspace. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: Add and use arm64_force_sig_fault where appropriateEric W. Biederman1-18/+8
Wrap force_sig_fault with a helper that calls arm64_show_signal and call arm64_force_sig_fault where appropraite. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-09-27signal/arm64: Only call set_thread_esr once in do_page_faultEric W. Biederman1-3/+1
This code is truly common between the signal sending cases so share it. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-09-27signal/arm64: Only perform one esr_to_fault_info call in do_page_faultEric W. Biederman1-3/+5
As this work is truly common between all of the signal sending cases there is no need to repeat it between the different cases. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-09-27signal/arm64: Expand __do_user_fault and remove itEric W. Biederman1-10/+8
Not all of the signals passed to __do_user_fault can be handled the same way so expand the now tiny __do_user_fault in it's callers and remove it. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: For clarity separate the 3 signal sending cases in do_page_faultEric W. Biederman1-4/+9
It gets easy to confuse what is going on when some code is shared and some not so stop sharing the trivial bits of signal generation to make future updates easier to understand. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: Consolidate the two hwpoison cases in do_page_faultEric W. Biederman1-7/+7
These two cases are practically the same and use siginfo differently from the other signals sent from do_page_fault. So consolidate them to make future changes easier. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: Factor set_thread_esr out of __do_user_faultEric W. Biederman1-2/+7
This pepares for sending signals with something other than arm64_force_sig_info. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: Remove unneeded tsk parameter from arm64_force_sig_infoEric W. Biederman1-1/+1
Every caller passes in current for tsk so there is no need to pass tsk. Instead make tsk a local variable initialized to current. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-27signal/arm64: Push siginfo generation into arm64_notify_dieEric W. Biederman1-31/+10
Instead of generating a struct siginfo before calling arm64_notify_die pass the signal number, tne sicode and the fault address into arm64_notify_die and have it call force_sig_fault instead of force_sig_info to let the generic code generate the struct siginfo. This keeps code passing just the needed information into siginfo generating code, making it easier to see what is happening and harder to get wrong. Further by letting the generic code handle the generation of struct siginfo it reduces the number of sites generating struct siginfo making it possible to review them and verify that all of the fiddly details for a structure passed to userspace are handled properly. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-09-25Revert "dma-mapping: clear dev->dma_ops in arch_teardown_dma_ops"Christoph Hellwig1-0/+5
This reverts commit 46053c73685411915d3de50c5a0045beef32806b. This change breaks architectures setting up dma_ops in their own magic way and not using arch_setup_dma_ops, so revert it. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-09-25arm64/mm: use fixmap to modify swapper_pg_dirJun Yao1-2/+24
Once swapper_pg_dir is in the rodata section, it will not be possible to modify it directly, but we will need to modify it in some cases. To enable this, we can use the fixmap when deliberately modifying swapper_pg_dir. As the pgd is only transiently mapped, this provides some resilience against illicit modification of the pgd, e.g. for Kernel Space Mirror Attack (KSMA). Signed-off-by: Jun Yao <yaojun8558363@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> [Mark: simplify ifdeffery, commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-25arm64/mm: Separate boot-time page tables from swapper_pg_dirJun Yao1-25/+5
Since the address of swapper_pg_dir is fixed for a given kernel image, it is an attractive target for manipulation via an arbitrary write. To mitigate this we'd like to make it read-only by moving it into the rodata section. We require that swapper_pg_dir is at a fixed offset from tramp_pg_dir and reserved_ttbr0, so these will also need to move into rodata. However, swapper_pg_dir is allocated along with some transient page tables used for boot which we do not want to move into rodata. As a step towards this, this patch separates the boot-time page tables into a new init_pg_dir, and reduces swapper_pg_dir to the single page it needs to be. This allows us to retain the relationship between swapper_pg_dir, tramp_pg_dir, and swapper_pg_dir, while cleanly separating these from the boot-time page tables. The init_pg_dir holds all of the pgd/pud/pmd/pte levels needed during boot, and all of these levels will be freed when we switch to the swapper_pg_dir, which is initialized by the existing code in paging_init(). Since we start off on the init_pg_dir, we no longer need to allocate a transient page table in paging_init() in order to ensure that swapper_pg_dir isn't live while we initialize it. There should be no functional change as a result of this patch. Signed-off-by: Jun Yao <yaojun8558363@gmail.com> Reviewed-by: James Morse <james.morse@arm.com> [Mark: place init_pg_dir after BSS, fold mm changes, commit message] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-25arm64/dma-mapping: Mildly optimise non-coherent IOMMU opsRobin Murphy1-5/+5
Whilst the symmetry of deferring to the existing sync callback in __iommu_map_page() is nice, taking a round-trip through iommu_iova_to_phys() is a pretty heavyweight way to get an address we can trivially compute from the page we already have. Tweaking it to just perform the cache maintenance directly when appropriate doesn't really make the code any more complicated, and the runtime efficiency gain can only be a benefit. Furthermore, the sync operations themselves know they can only be invoked on a managed DMA ops domain, so can use the fast specific domain lookup to avoid excessive manipulation of the group refcount (particularly in the scatterlist cases). Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-24arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flagsSteve Capper1-4/+34
For contiguous hugetlb, huge_ptep_set_access_flags performs a get_clear_flush (which then flushes the TLBs) even when no change of ptes is necessary. Unfortunately, this behaviour can lead to back-to-back page faults being generated when running with multiple threads that access the same contiguous huge page. Thread 1 | Thread 2 -----------------------------+------------------------------ hugetlb_fault | huge_ptep_set_access_flags | -> invalidate pte range | hugetlb_fault continue processing | wait for hugetlb_fault_mutex release mutex and return | huge_ptep_set_access_flags | -> invalidate pte range hugetlb_fault ... This patch changes huge_ptep_set_access_flags s.t. we first read the contiguous range of ptes (whilst preserving dirty information); the pte range is only then invalidated where necessary and this prevents further spurious page faults. Fixes: d8bdcff28764 ("arm64: hugetlb: Add break-before-make logic for contiguous entries") Reported-by: Lei Zhang <zhang.lei@jp.fujitsu.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-24arm64: hugetlb: Fix handling of young ptesSteve Capper1-3/+9
In the contiguous bit hugetlb break-before-make code we assume that all hugetlb pages are young. In fact, remove_migration_pte is able to place an old hugetlb pte so this assumption is not valid. This patch fixes the contiguous hugetlb scanning code to preserve young ptes. Fixes: d8bdcff28764 ("arm64: hugetlb: Add break-before-make logic for contiguous entries") Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-09-21arm64: Kconfig: Remove ARCH_HAS_HOLES_MEMORYMODELJames Morse1-2/+0
include/linux/mmzone.h describes ARCH_HAS_HOLES_MEMORYMODEL as relevant when parts the memmap have been free()d. This would happen on systems where memory is smaller than a sparsemem-section, and the extra struct pages are expensive. pfn_valid() on these systems returns true for the whole sparsemem-section, so an extra memmap_valid_within() check is needed. On arm64 we have nomap memory, so always provide pfn_valid() to test for nomap pages. This means ARCH_HAS_HOLES_MEMORYMODEL's extra checks are already rolled up into pfn_valid(). Remove it. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-18arm64: mm: Support Common Not Private translationsVladimir Murzin2-3/+11
Common Not Private (CNP) is a feature of ARMv8.2 extension which allows translation table entries to be shared between different PEs in the same inner shareable domain, so the hardware can use this fact to optimise the caching of such entries in the TLB. CNP occupies one bit in TTBRx_ELy and VTTBR_EL2, which advertises to the hardware that the translation table entries pointed to by this TTBR are the same as every PE in the same inner shareable domain for which the equivalent TTBR also has CNP bit set. In case CNP bit is set but TTBR does not point at the same translation table entries for a given ASID and VMID, then the system is mis-configured, so the results of translations are UNPREDICTABLE. For kernel we postpone setting CNP till all cpus are up and rely on cpufeature framework to 1) patch the code which is sensitive to CNP and 2) update TTBR1_EL1 with CNP bit set. TTBR1_EL1 can be reprogrammed as result of hibernation or cpuidle (via __enable_mmu). For these two cases we restore CnP bit via __cpu_suspend_exit(). There are a few cases we need to care of changes in TTBR0_EL1: - a switch to idmap - software emulated PAN we rule out latter via Kconfig options and for the former we make sure that CNP is set for non-zero ASIDs only. Reviewed-by: James Morse <james.morse@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> [catalin.marinas@arm.com: default y for CONFIG_ARM64_CNP] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-14arm64: cpu: Move errata and feature enable callbacks closer to callersWill Deacon1-14/+0
The cpu errata and feature enable callbacks are only called via their respective arm64_cpu_capabilities structure and therefore shouldn't exist in the global namespace. Move the PAN, RAS and cache maintenance emulation enable callbacks into the same files as their corresponding arm64_cpu_capabilities structures, making them static in the process. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-10arm64: dump: Use consistent capitalisation for page-table dumpsWill Deacon1-3/+3
Being consistent in our capitalisation for page-table dumps helps when grepping for things like "end". Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-09-08dma-mapping: clear dev->dma_ops in arch_teardown_dma_opsChristoph Hellwig1-5/+0
There is no reason to leave the per-device dma_ops around when deconfiguring a device, so move this code from arm64 into the common code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-09-06arm64: fix erroneous warnings in page freeing functionsMark Rutland1-4/+6
In pmd_free_pte_page() and pud_free_pmd_page() we try to warn if they hit a present non-table entry. In both cases we'll warn for non-present entries, as the VM_WARN_ON() only checks the entry is not a table entry. This has been observed to result in warnings when booting a v4.19-rc2 kernel under qemu. Fix this by bailing out earlier for non-present entries. Fixes: ec28bb9c9b0826d7 ("arm64: Implement page table free interfaces") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-08-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-5/+5
Merge updates from Andrew Morton: - a few misc things - a few Y2038 fixes - ntfs fixes - arch/sh tweaks - ocfs2 updates - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits) mm/hmm.c: remove unused variables align_start and align_end fs/userfaultfd.c: remove redundant pointer uwq mm, vmacache: hash addresses based on pmd mm/list_lru: introduce list_lru_shrink_walk_irq() mm/list_lru.c: pass struct list_lru_node* as an argument to __list_lru_walk_one() mm/list_lru.c: move locking from __list_lru_walk_one() to its caller mm/list_lru.c: use list_lru_walk_one() in list_lru_walk_node() mm, swap: make CONFIG_THP_SWAP depend on CONFIG_SWAP mm/sparse: delete old sparse_init and enable new one mm/sparse: add new sparse_init_nid() and sparse_init() mm/sparse: move buffer init/fini to the common place mm/sparse: use the new sparse buffer functions in non-vmemmap mm/sparse: abstract sparse buffer allocations mm/hugetlb.c: don't zero 1GiB bootmem pages mm, page_alloc: double zone's batchsize mm/oom_kill.c: document oom_lock mm/hugetlb: remove gigantic page support for HIGHMEM mm, oom: remove sleep from under oom_lock kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous() mm/cma: remove unsupported gfp_mask parameter from cma_alloc() ...
2018-08-17kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()Marek Szyprowski1-2/+2
The CMA memory allocator doesn't support standard gfp flags for memory allocation, so there is no point having it as a parameter for dma_alloc_from_contiguous() function. Replace it by a boolean no_warn argument, which covers all the underlaying cma_alloc() function supports. This will help to avoid giving false feeling that this function supports standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer, what has already been an issue: see commit dd65a941f6ba ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag"). Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michał Nazarewicz <mina86@mina86.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Laura Abbott <labbott@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17mm: convert return type of handle_mm_fault() caller to vm_fault_tSouptick Joarder1-3/+3
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") In this patch all the caller of handle_mm_fault() are changed to return vm_fault_t type. Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David S. Miller <davem@davemloft.net> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds1-1/+5
Pull arm64 fixes from Will Deacon: "A couple of arm64 fixes - Fix boot on Hikey-960 by avoiding an IPI with interrupts disabled - Fix address truncation in pfn_valid() implementation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: check for upper PAGE_SHIFT bits in pfn_valid() arm64: Avoid calling stop_machine() when patching jump labels