aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/mm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-22arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenanceWill Deacon1-2/+3
When rewriting swapper using nG mappings, we must performance cache maintenance around each page table access in order to avoid coherency problems with the host's cacheable alias under KVM. To ensure correct ordering of the maintenance with respect to Device memory accesses made with the Stage-1 MMU disabled, DMBs need to be added between the maintenance and the corresponding memory access. This patch adds a missing DMB between writing a new page table entry and performing a clean+invalidate on the same line. Fixes: f992b4dfd58b ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings") Cc: <stable@vger.kernel.org> # 4.16.x- Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-19arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flagMarek Szyprowski1-4/+5
dma_alloc_*() buffers might be exposed to userspace via mmap() call, so they should be cleared on allocation. In case of IOMMU-based dma-mapping implementation such buffer clearing was missing in the code path for DMA_ATTR_FORCE_CONTIGUOUS flag handling, because dma_alloc_from_contiguous() doesn't honor __GFP_ZERO flag. This patch fixes this issue. For more information on clearing buffers allocated by dma_alloc_* functions, see commit 6829e274a623 ("arm64: dma-mapping: always clear allocated buffers"). Fixes: 44176bb38fa4 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner1-3/+3
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-08Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds2-18/+33
Pull arm64 updates from Catalin Marinas: "Apart from the core arm64 and perf changes, the Spectre v4 mitigation touches the arm KVM code and the ACPI PPTT support touches drivers/ (acpi and cacheinfo). I should have the maintainers' acks in place. Summary: - Spectre v4 mitigation (Speculative Store Bypass Disable) support for arm64 using SMC firmware call to set a hardware chicken bit - ACPI PPTT (Processor Properties Topology Table) parsing support and enable the feature for arm64 - Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The primary motivation is Scalable Vector Extensions which requires more space on the signal frame than the currently defined MINSIGSTKSZ - ARM perf patches: allow building arm-cci as module, demote dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups - cmpwait() WFE optimisation to avoid some spurious wakeups - L1_CACHE_BYTES reverted back to 64 (for performance reasons that have to do with some network allocations) while keeping ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual hardware Cache Writeback Granule - Turn LSE atomics on by default in Kconfig - Kernel fault reporting tidying - Some #include and miscellaneous cleanups" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits) arm64: Fix syscall restarting around signal suppressed by tracer arm64: topology: Avoid checking numa mask for scheduler MC selection ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled arm64: cpu_errata: include required headers arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file arm64: signal: Report signal frame size to userspace via auxv arm64/sve: Thin out initialisation sanity-checks for sve_max_vl arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests arm64: KVM: Add ARCH_WORKAROUND_2 support for guests arm64: KVM: Add HYP per-cpu accessors arm64: ssbd: Add prctl interface for per-thread mitigation arm64: ssbd: Introduce thread flag to control userspace mitigation arm64: ssbd: Restore mitigation status on CPU resume arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation arm64: ssbd: Add global mitigation state accessor arm64: Add 'ssbd' command-line option arm64: Add ARCH_WORKAROUND_2 probing arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2 arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1 ...
2018-06-04Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-6/+12
Pull siginfo updates from Eric Biederman: "This set of changes close the known issues with setting si_code to an invalid value, and with not fully initializing struct siginfo. There remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64 and x86 to get the code that generates siginfo into a simpler and more maintainable state. Most of that work involves refactoring the signal handling code and thus careful code review. Also not included is the work to shrink the in kernel version of struct siginfo. That depends on getting the number of places that directly manipulate struct siginfo under control, as it requires the introduction of struct kernel_siginfo for the in kernel things. Overall this set of changes looks like it is making good progress, and with a little luck I will be wrapping up the siginfo work next development cycle" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits) signal/sh: Stop gcc warning about an impossible case in do_divide_error signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions signal/um: More carefully relay signals in relay_signal. signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR} signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code signal/signalfd: Add support for SIGSYS signal/signalfd: Remove __put_user from signalfd_copyinfo signal/xtensa: Use force_sig_fault where appropriate signal/xtensa: Consistenly use SIGBUS in do_unaligned_user signal/um: Use force_sig_fault where appropriate signal/sparc: Use force_sig_fault where appropriate signal/sparc: Use send_sig_fault where appropriate signal/sh: Use force_sig_fault where appropriate signal/s390: Use force_sig_fault where appropriate signal/riscv: Replace do_trap_siginfo with force_sig_fault signal/riscv: Use force_sig_fault where appropriate signal/parisc: Use force_sig_fault where appropriate signal/parisc: Use force_sig_mceerr where appropriate signal/openrisc: Use force_sig_fault where appropriate signal/nios2: Use force_sig_fault where appropriate ...
2018-06-04Merge tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-10/+0
Pull dma-mapping updates from Christoph Hellwig: - replace the force_dma flag with a dma_configure bus method. (Nipun Gupta, although one patch is іncorrectly attributed to me due to a git rebase bug) - use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai) - remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the right thing for bounce buffering. - move dma-debug initialization to common code, and apply a few cleanups to the dma-debug code. - cleanup the Kconfig mess around swiotlb selection - swiotlb comment fixup (Yisheng Xie) - a trivial swiotlb fix. (Dan Carpenter) - support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt) - add a new generic dma-noncoherent dma_map_ops implementation and use it for arc, c6x and nds32. - improve scatterlist validity checking in dma-debug. (Robin Murphy) - add a struct device quirk to limit the dma-mask to 32-bit due to bridge/system issues, and switch x86 to use it instead of a local hack for VIA bridges. - handle devices without a dma_mask more gracefully in the dma-direct code. * tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits) dma-direct: don't crash on device without dma_mask nds32: use generic dma_noncoherent_ops nds32: implement the unmap_sg DMA operation nds32: consolidate DMA cache maintainance routines x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag x86/pci-dma: remove the explicit nodac and allowdac option x86/pci-dma: remove the experimental forcesac boot option Documentation/x86: remove a stray reference to pci-nommu.c core, dma-direct: add a flag 32-bit dma limits dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs dma-debug: check scatterlist segments c6x: use generic dma_noncoherent_ops arc: use generic dma_noncoherent_ops arc: fix arc_dma_{map,unmap}_page arc: fix arc_dma_sync_sg_for_{cpu,device} arc: simplify arc_dma_sync_single_for_{cpu,device} dma-mapping: provide a generic dma-noncoherent implementation dma-mapping: simplify Kconfig dependencies riscv: add swiotlb support riscv: only enable ZONE_DMA32 for 64-bit ...
2018-05-24arm64: Make sure permission updates happen for pmd/pudLaura Abbott1-6/+10
Commit 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings") disallowed block mappings for ioremap since that code does not honor break-before-make. The same APIs are also used for permission updating though and the extra checks prevent the permission updates from happening, even though this should be permitted. This results in read-only permissions not being fully applied. Visibly, this can occasionaly be seen as a failure on the built in rodata test when the test data ends up in a section or as an odd RW gap on the page table dump. Fix this by using pgattr_change_is_safe instead of p*d_present for determining if the change is permitted. Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reported-by: Peter Robinson <pbrobinson@gmail.com> Fixes: 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings") Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-23arm64: Unify kernel fault reportingMark Rutland1-14/+23
In do_page_fault(), we handle some kernel faults early, and simply die() with a message. For faults handled later, we dump the faulting address, decode the ESR, walk the page tables, and perform a number of steps to ensure that this data is reported. Let's unify the handling of fatal kernel faults with a new die_kernel_fault() helper, handling all of these details. This is largely the same as the existing logic in __do_kernel_fault(), except that addresses are consistently padded to 16 hex characters, as would be expected for a 64-bit address. The messages currently logged in do_page_fault are adjusted to fit into the die_kernel_fault() message template. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-23arm64: make is_permission_fault() name clearerMark Rutland1-4/+5
The naming of is_permission_fault() makes it sound like it should return true for permission faults from EL0, but by design, it only does so for faults from EL1. Let's make this clear by dropping el1 in the name, as we do for is_el1_instruction_abort(). Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-22arm64: fault: Don't leak data in ESR context for user fault on kernel VAPeter Maydell1-0/+51
If userspace faults on a kernel address, handing them the raw ESR value on the sigframe as part of the delivered signal can leak data useful to attackers who are using information about the underlying hardware fault type (e.g. translation vs permission) as a mechanism to defeat KASLR. However there are also legitimate uses for the information provided in the ESR -- notably the GCC and LLVM sanitizers use this to report whether wild pointer accesses by the application are reads or writes (since a wild write is a more serious bug than a wild read), so we don't want to drop the ESR information entirely. For faulting addresses in the kernel, sanitize the ESR. We choose to present userspace with the illusion that there is nothing mapped in the kernel's part of the address space at all, by reporting all faults as level 0 translation faults taken to EL1. These fields are safe to pass through to userspace as they depend only on the instruction that userspace used to provoke the fault: EC IL (always) ISV CM WNR (for all data aborts) All the other fields in ESR except DFSC are architecturally RES0 for an L0 translation fault taken to EL1, so can be zeroed out without confusing userspace. The illusion is not entirely perfect, as there is a tiny wrinkle where we will report an alignment fault that was not due to the memory type (for instance a LDREX to an unaligned address) as a translation fault, whereas if you do this on real unmapped memory the alignment fault takes precedence. This is not likely to trip anybody up in practice, as the only users we know of for the ESR information who care about the behaviour for kernel addresses only really want to know about the WnR bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-15arm64: Increase ARCH_DMA_MINALIGN to 128Catalin Marinas1-0/+5
This patch increases the ARCH_DMA_MINALIGN to 128 so that it covers the currently known Cache Writeback Granule (CTR_EL0.CWG) on arm64 and moves the fallback in cache_line_size() from L1_CACHE_BYTES to this constant. In addition, it warns (and taints) if the CWG is larger than ARCH_DMA_MINALIGN as this is not safe with non-coherent DMA. Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-05-08dma-debug: move initialization to common codeChristoph Hellwig1-10/+0
Most mainstream architectures are using 65536 entries, so lets stick to that. If someone is really desperate to override it that can still be done through <asm/dma-mapping.h>, but I'd rather see a really good rationale for that. dma_debug_init is now called as a core_initcall, which for many architectures means much earlier, and provides dma-debug functionality earlier in the boot process. This should be safe as it only relies on the memory allocator already being available. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-05-01arm64: To remove initrd reserved area entry from memblockCHANDAN VN1-1/+3
INITRD reserved area entry is not removed from memblock even though initrd reserved area is freed. After freeing the memory it is released from memblock. The same can be checked from /sys/kernel/debug/memblock/reserved. The patch makes sure that the initrd entry is removed from memblock when keepinitrd is not enabled. The patch only affects accounting and debugging. This does not fix any memory leak. Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: CHANDAN VN <chandan.vn@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-04-25signal: Ensure every siginfo we send has all bits initializedEric W. Biederman1-6/+12
Call clear_siginfo to ensure every stack allocated siginfo is properly initialized before being passed to the signal sending functions. Note: It is not safe to depend on C initializers to initialize struct siginfo on the stack because C is allowed to skip holes when initializing a structure. The initialization of struct siginfo in tracehook_report_syscall_exit was moved from the helper user_single_step_siginfo into tracehook_report_syscall_exit itself, to make it clear that the local variable siginfo gets fully initialized. In a few cases the scope of struct siginfo has been reduced to make it clear that siginfo siginfo is not used on other paths in the function in which it is declared. Instances of using memset to initialize siginfo have been replaced with calls clear_siginfo for clarity. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-24arm64: mm: drop addr parameter from sync icache and dcacheShaokun Zhang1-1/+1
The addr parameter isn't used for anything. Let's simplify and get rid of it, like arm. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-04-17arm64: kasan: avoid pfn_to_nid() before page array is initializedMark Rutland1-2/+2
In arm64's kasan_init(), we use pfn_to_nid() to find the NUMA node a span of memory is in, hoping to allocate shadow from the same NUMA node. However, at this point, the page array has not been initialized, and thus this is bogus. Since commit: f165b378bbdf6c8a ("mm: uninitialized struct page poisoning sanity") ... accessing fields of the page array results in a boot time Oops(), highlighting this problem: [ 0.000000] Unable to handle kernel paging request at virtual address dfff200000000000 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x96000004 [ 0.000000] Exception class = DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004 [ 0.000000] CM = 0, WnR = 0 [ 0.000000] [dfff200000000000] address between user and kernel address ranges [ 0.000000] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.16.0-07317-gf165b378bbdf #42 [ 0.000000] Hardware name: ARM Juno development board (r1) (DT) [ 0.000000] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 0.000000] pc : __asan_load8+0x8c/0xa8 [ 0.000000] lr : __dump_page+0x3c/0x3b8 [ 0.000000] sp : ffff2000099b7ca0 [ 0.000000] x29: ffff2000099b7ca0 x28: ffff20000a1762c0 [ 0.000000] x27: ffff7e0000000000 x26: ffff2000099dd000 [ 0.000000] x25: ffff200009a3f960 x24: ffff200008f9c38c [ 0.000000] x23: ffff20000a9d3000 x22: ffff200009735430 [ 0.000000] x21: fffffffffffffffe x20: ffff7e0001e50420 [ 0.000000] x19: ffff7e0001e50400 x18: 0000000000001840 [ 0.000000] x17: ffffffffffff8270 x16: 0000000000001840 [ 0.000000] x15: 0000000000001920 x14: 0000000000000004 [ 0.000000] x13: 0000000000000000 x12: 0000000000000800 [ 0.000000] x11: 1ffff0012d0f89ff x10: ffff10012d0f89ff [ 0.000000] x9 : 0000000000000000 x8 : ffff8009687c5000 [ 0.000000] x7 : 0000000000000000 x6 : ffff10000f282000 [ 0.000000] x5 : 0000000000000040 x4 : fffffffffffffffe [ 0.000000] x3 : 0000000000000000 x2 : dfff200000000000 [ 0.000000] x1 : 0000000000000005 x0 : 0000000000000000 [ 0.000000] Process swapper (pid: 0, stack limit = 0x (ptrval)) [ 0.000000] Call trace: [ 0.000000] __asan_load8+0x8c/0xa8 [ 0.000000] __dump_page+0x3c/0x3b8 [ 0.000000] dump_page+0xc/0x18 [ 0.000000] kasan_init+0x2e8/0x5a8 [ 0.000000] setup_arch+0x294/0x71c [ 0.000000] start_kernel+0xdc/0x500 [ 0.000000] Code: aa0403e0 9400063c 17ffffee d343fc00 (38e26800) [ 0.000000] ---[ end trace 67064f0e9c0cc338 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Let's fix this by using early_pfn_to_nid(), as other architectures do in their kasan init code. Note that early_pfn_to_nid acquires the nid from the memblock array, which we iterate over in kasan_init(), so this should be fine. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 39d114ddc6822302 ("arm64: add KASAN support") Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-04-11exec: pass stack rlimit into mm layout functionsKees Cook1-7/+7
Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-04Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds3-142/+137
Pull arm64 updates from Will Deacon: "Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: uaccess: Fix omissions from usercopy whitelist arm64: fpsimd: Split cpu field out from struct fpsimd_state arm64: tlbflush: avoid writing RES0 bits arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC arm64: fpsimd: include <linux/init.h> in fpsimd.h drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor perf: arm_spe: include linux/vmalloc.h for vmap() Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)" arm64: cpufeature: Avoid warnings due to unused symbols arm64: Add work around for Arm Cortex-A55 Erratum 1024718 arm64: Delay enabling hardware DBM feature arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35 arm64: capabilities: Handle shared entries arm64: capabilities: Add support for checks based on a list of MIDRs arm64: Add helpers for checking CPU MIDR against a range arm64: capabilities: Clean up midr range helpers arm64: capabilities: Change scope of VHE to Boot CPU feature ...
2018-03-27Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"Will Deacon2-19/+1
This reverts commit 1f85b42a691cd8329ba82dbcaeec80ac1231b32a. The internal dma-direct.h API has changed in -next, which collides with us trying to use it to manage non-coherent DMA devices on systems with unreasonably large cache writeback granules. This isn't at all trivial to resolve, so revert our changes for now and we can revisit this after the merge window. Effectively, this just restores our behaviour back to that of 4.16. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-26arm64: Delay enabling hardware DBM featureSuzuki K Poulose1-7/+6
We enable hardware DBM bit in a capable CPU, very early in the boot via __cpu_setup. This doesn't give us a flexibility of optionally disable the feature, as the clearing the bit is a bit costly as the TLB can cache the settings. Instead, we delay enabling the feature until the CPU is brought up into the kernel. We use the feature capability mechanism to handle it. The hardware DBM is a non-conflicting feature. i.e, the kernel can safely run with a mix of CPUs with some using the feature and the others don't. So, it is safe for a late CPU to have this capability and enable it, even if the active CPUs don't. To get this handled properly by the infrastructure, we unconditionally set the capability and only enable it on CPUs which really have the feature. Also, we print the feature detection from the "matches" call back to make sure we don't mislead the user when none of the CPUs could use the feature. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Dave Martin <dave.martin@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-26arm64: capabilities: Update prototype for enable call backDave Martin1-2/+1
We issue the enable() call back for all CPU hwcaps capabilities available on the system, on all the CPUs. So far we have ignored the argument passed to the call back, which had a prototype to accept a "void *" for use with on_each_cpu() and later with stop_machine(). However, with commit 0a0d111d40fd1 ("arm64: cpufeature: Pass capability structure to ->enable callback"), there are some users of the argument who wants the matching capability struct pointer where there are multiple matching criteria for a single capability. Clean up the declaration of the call back to make it clear. 1) Renamed to cpu_enable(), to imply taking necessary actions on the called CPU for the entry. 2) Pass const pointer to the capability, to allow the call back to check the entry. (e.,g to check if any action is needed on the CPU) 3) We don't care about the result of the call back, turning this to a void. Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: James Morse <james.morse@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Dave Martin <dave.martin@arm.com> [suzuki: convert more users, rename call back and drop results] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-22mm/vmalloc: add interfaces to free unmapped page tableToshi Kani1-0/+10
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li <lious.lilei@hisilicon.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Wang Xuefeng <wxf.wang@hisilicon.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09arm64: signal: Ensure si_code is valid for all fault signalsDave Martin1-58/+58
Currently, as reported by Eric, an invalid si_code value 0 is passed in many signals delivered to userspace in response to faults and other kernel errors. Typically 0 is passed when the fault is insufficiently diagnosable or when there does not appear to be any sensible alternative value to choose. This appears to violate POSIX, and is intuitively wrong for at least two reasons arising from the fact that 0 == SI_USER: 1) si_code is a union selector, and SI_USER (and si_code <= 0 in general) implies the existence of a different set of fields (siginfo._kill) from that which exists for a fault signal (siginfo._sigfault). However, the code raising the signal typically writes only the _sigfault fields, and the _kill fields make no sense in this case. Thus when userspace sees si_code == 0 (SI_USER) it may legitimately inspect fields in the inactive union member _kill and obtain garbage as a result. There appears to be software in the wild relying on this, albeit generally only for printing diagnostic messages. 2) Software that wants to be robust against spurious signals may discard signals where si_code == SI_USER (or <= 0), or may filter such signals based on the si_uid and si_pid fields of siginfo._sigkill. In the case of fault signals, this means that important (and usually fatal) error conditions may be silently ignored. In practice, many of the faults for which arm64 passes si_code == 0 are undiagnosable conditions such as exceptions with syndrome values in ESR_ELx to which the architecture does not yet assign any meaning, or conditions indicative of a bug or error in the kernel or system and thus that are unrecoverable and should never occur in normal operation. The approach taken in this patch is to translate all such undiagnosable or "impossible" synchronous fault conditions to SIGKILL, since these are at least probably localisable to a single process. Some of these conditions should really result in a kernel panic, but due to the lack of diagnostic information it is difficult to be certain: this patch does not add any calls to panic(), but this could change later if justified. Although si_code will not reach userspace in the case of SIGKILL, it is still desirable to pass a nonzero value so that the common siginfo handling code can detect incorrect use of si_code == 0 without false positives. In this case the si_code dependent siginfo fields will not be correctly initialised, but since they are not passed to userspace I deem this not to matter. A few faults can reasonably occur in realistic userspace scenarios, and _should_ raise a regular, handleable (but perhaps not ignorable/blockable) signal: for these, this patch attempts to choose a suitable standard si_code value for the raised signal in each case instead of 0. arm64 was the only arch to define a BUS_FIXME code, so after this patch nobody defines it. This patch therefore also removes the relevant code from siginfo_layout(). Cc: James Morse <james.morse@arm.com> Reported-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-09arm64: Add support for new control bits CTR_EL0.DIC and CTR_EL0.IDCShanker Donthineni1-1/+20
The DCache clean & ICache invalidation requirements for instructions to be data coherence are discoverable through new fields in CTR_EL0. The following two control bits DIC and IDC were defined for this purpose. No need to perform point of unification cache maintenance operations from software on systems where CPU caches are transparent. This patch optimize the three functions __flush_cache_user_range(), clean_dcache_area_pou() and invalidate_icache_range() if the hardware reports CTR_EL0.IDC and/or CTR_EL0.IDC. Basically it skips the two instructions 'DC CVAU' and 'IC IVAU', and the associated loop logic in order to avoid the unnecessary overhead. CTR_EL0.DIC: Instruction cache invalidation requirements for instruction to data coherence. The meaning of this bit[29]. 0: Instruction cache invalidation to the point of unification is required for instruction to data coherence. 1: Instruction cache cleaning to the point of unification is not required for instruction to data coherence. CTR_EL0.IDC: Data cache clean requirements for instruction to data coherence. The meaning of this bit[28]. 0: Data cache clean to the point of unification is required for instruction to data coherence, unless CLIDR_EL1.LoC == 0b000 or (CLIDR_EL1.LoUIS == 0b000 && CLIDR_EL1.LoUU == 0b000). 1: Data cache clean to the point of unification is not required for instruction to data coherence. Co-authored-by: Philip Elcan <pelcan@codeaurora.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-06arm64: kaslr: Set TCR_EL1.NFD1 when CONFIG_RANDOMIZE_BASE=yWill Deacon1-1/+8
TCR_EL1.NFD1 was allocated by SVE and ensures that fault-surpressing SVE memory accesses (e.g. speculative accesses from a first-fault gather load) which translate via TTBR1_EL1 result in a translation fault if they miss in the TLB when executed from EL0. This mitigates some timing attacks against KASLR, where the kernel address space could otherwise be probed efficiently using the FFR in conjunction with suppressed faults on SVE loads. Cc: Dave Martin <Dave.Martin@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-06arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)Catalin Marinas2-1/+19
Commit 97303480753e ("arm64: Increase the max granular size") increased the cache line size to 128 to match Cavium ThunderX, apparently for some performance benefit which could not be confirmed. This change, however, has an impact on the network packets allocation in certain circumstances, requiring slightly over a 4K page with a significant performance degradation. This patch reverts L1_CACHE_SHIFT back to 6 (64-byte cache line) while keeping ARCH_DMA_MINALIGN at 128. The cache_line_size() function was changed to default to ARCH_DMA_MINALIGN in the absence of a meaningful CTR_EL0.CWG bit field. In addition, if a system with ARCH_DMA_MINALIGN < CTR_EL0.CWG is detected, the kernel will force swiotlb bounce buffering for all non-coherent devices since DMA cache maintenance on sub-CWG ranges is not safe, leading to data corruption. Cc: Tirumalesh Chalamarla <tchalamarla@cavium.com> Cc: Timur Tabi <timur@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-06arm64: mm: Rework unhandled user pagefaults to call arm64_force_sig_infoWill Deacon1-51/+36
Reporting unhandled user pagefaults via arm64_force_sig_info means that __do_user_fault can be drastically simplified, since it no longer has to worry about printing the fault information and can consequently just take the siginfo as a parameter. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-06arm64: Pass user fault info to arm64_notify_die instead of printing itWill Deacon1-22/+8
There's no need for callers of arm64_notify_die to print information about user faults. Instead, they can pass a string to arm64_notify_die which will be printed subject to show_unhandled_signals. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-26arm64: mm: fix thinko in non-global page table attribute checkArd Biesheuvel1-4/+4
The routine pgattr_change_is_safe() was extended in commit 4e6020565596 ("arm64: mm: Permit transitioning from Global to Non-Global without BBM") to permit changing the nG attribute from not set to set, but did so in a way that inadvertently disallows such changes if other permitted attribute changes take place at the same time. So update the code to take this into account. Fixes: 4e6020565596 ("arm64: mm: Permit transitioning from Global to ...") Cc: <stable@vger.kernel.org> # 4.14.x- Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-22arm64: Enforce BBM for huge IO/VMAP mappingsWill Deacon1-0/+10
ioremap_page_range doesn't honour break-before-make and attempts to put down huge mappings (using p*d_set_huge) over the top of pre-existing table entries. This leads to us leaking page table memory and also gives rise to TLB conflicts and spurious aborts, which have been seen in practice on Cortex-A75. Until this has been resolved, refuse to put block mappings when the existing entry is found to be present. Fixes: 324420bf91f60 ("arm64: add support for ioremap() block mappings") Reported-by: Hanjun Guo <hanjun.guo@linaro.org> Reported-by: Lei Li <lious.lilei@hisilicon.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-16arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tablesWill Deacon6-278/+298
In many cases, page tables can be accessed concurrently by either another CPU (due to things like fast gup) or by the hardware page table walker itself, which may set access/dirty bits. In such cases, it is important to use READ_ONCE/WRITE_ONCE when accessing page table entries so that entries cannot be torn, merged or subject to apparent loss of coherence due to compiler transformations. Whilst there are some scenarios where this cannot happen (e.g. pinned kernel mappings for the linear region), the overhead of using READ_ONCE /WRITE_ONCE everywhere is minimal and makes the code an awful lot easier to reason about. This patch consistently uses these macros in the arch code, as well as explicitly namespacing pointers to page table entries from the entries themselves by using adopting a 'p' suffix for the former (as is sometimes used elsewhere in the kernel source). Tested-by: Yury Norov <ynorov@caviumnetworks.com> Tested-by: Richard Ruigrok <rruigrok@codeaurora.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-14arm64: proc: Set PTE_NG for table entries to avoid traversing them twiceWill Deacon1-5/+9
When KASAN is enabled, the swapper page table contains many identical mappings of the zero page, which can lead to a stall during boot whilst the G -> nG code continually walks the same page table entries looking for global mappings. This patch sets the nG bit (bit 11, which is IGNORED) in table entries after processing the subtree so we can easily skip them if we see them a second time. Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-10Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-10/+22
Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...
2018-02-08Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds3-14/+221
Pull more arm64 updates from Catalin Marinas: "As I mentioned in the last pull request, there's a second batch of security updates for arm64 with mitigations for Spectre/v1 and an improved one for Spectre/v2 (via a newly defined firmware interface API). Spectre v1 mitigation: - back-end version of array_index_mask_nospec() - masking of the syscall number to restrict speculation through the syscall table - masking of __user pointers prior to deference in uaccess routines Spectre v2 mitigation update: - using the new firmware SMC calling convention specification update - removing the current PSCI GET_VERSION firmware call mitigation as vendors are deploying new SMCCC-capable firmware - additional branch predictor hardening for synchronous exceptions and interrupts while in user mode Meltdown v3 mitigation update: - Cavium Thunder X is unaffected but a hardware erratum gets in the way. The kernel now starts with the page tables mapped as global and switches to non-global if kpti needs to be enabled. Other: - Theoretical trylock bug fixed" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (38 commits) arm64: Kill PSCI_GET_VERSION as a variant-2 workaround arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: smccc: Implement SMCCC v1.1 inline primitive arm/arm64: smccc: Make function identifiers an unsigned quantity firmware/psci: Expose SMCCC version through psci_ops firmware/psci: Expose PSCI conduit arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support arm/arm64: KVM: Turn kvm_psci_version into a static inline arm/arm64: KVM: Advertise SMCCC v1.1 arm/arm64: KVM: Implement PSCI 1.0 support arm/arm64: KVM: Add smccc accessors to PSCI code arm/arm64: KVM: Add PSCI_VERSION helper arm/arm64: KVM: Consolidate the PSCI include files arm64: KVM: Increment PC after handling an SMC trap arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls arm64: entry: Apply BP hardening for suspicious interrupts from EL0 arm64: entry: Apply BP hardening for high-priority synchronous exceptions arm64: futex: Mask __user pointers prior to dereference ...
2018-02-06Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+2
Merge misc updates from Andrew Morton: - kasan updates - procfs - lib/bitmap updates - other lib/ updates - checkpatch tweaks - rapidio - ubsan - pipe fixes and cleanups - lots of other misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) Documentation/sysctl/user.txt: fix typo MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns MAINTAINERS: update various PALM patterns MAINTAINERS: update "ARM/OXNAS platform support" patterns MAINTAINERS: update Cortina/Gemini patterns MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern MAINTAINERS: remove ANDROID ION pattern mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors mm: docs: fix parameter names mismatch mm: docs: fixup punctuation pipe: read buffer limits atomically pipe: simplify round_pipe_size() pipe: reject F_SETPIPE_SZ with size over UINT_MAX pipe: fix off-by-one error when checking buffer limits pipe: actually allow root to exceed the pipe buffer limits pipe, sysctl: remove pipe_proc_fn() pipe, sysctl: drop 'min' parameter from pipe-max-size converter kasan: rework Kconfig settings crash_dump: is_kdump_kernel can be boolean kernel/mutex: mutex_is_locked can be boolean ...
2018-02-06kasan: clean up KASAN_SHADOW_SCALE_SHIFT usageAndrey Konovalov1-1/+2
Right now the fact that KASAN uses a single shadow byte for 8 bytes of memory is scattered all over the code. This change defines KASAN_SHADOW_SCALE_SHIFT early in asm include files and makes use of this constant where necessary. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/34937ca3b90736eaad91b568edf5684091f662e3.1515775666.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06arm64: entry: Apply BP hardening for suspicious interrupts from EL0Will Deacon1-0/+6
It is possible to take an IRQ from EL0 following a branch to a kernel address in such a way that the IRQ is prioritised over the instruction abort. Whilst an attacker would need to get the stars to align here, it might be sufficient with enough calibration so perform BP hardening in the rare case that we see a kernel address in the ELR when handling an IRQ from EL0. Reported-by: Dan Hettena <dhettena@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: entry: Apply BP hardening for high-priority synchronous exceptionsWill Deacon1-0/+9
Software-step and PC alignment fault exceptions have higher priority than instruction abort exceptions, so apply the BP hardening hooks there too if the user PC appears to reside in kernel space. Reported-by: Dan Hettena <dhettena@nvidia.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: Make USER_DS an inclusive limitRobin Murphy1-2/+2
Currently, USER_DS represents an exclusive limit while KERNEL_DS is inclusive. In order to do some clever trickery for speculation-safe masking, we need them both to behave equivalently - there aren't enough bits to make KERNEL_DS exclusive, so we have precisely one option. This also happens to correct a longstanding false negative for a range ending on the very top byte of kernel memory. Mark Rutland points out that we've actually got the semantics of addresses vs. segments muddled up in most of the places we need to amend, so shuffle the {USER,KERNEL}_DS definitions around such that we can correct those properly instead of just pasting "-1"s everywhere. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: idmap: Use "awx" flags for .idmap.text .pushsection directivesWill Deacon1-4/+4
The identity map is mapped as both writeable and executable by the SWAPPER_MM_MMUFLAGS and this is relied upon by the kpti code to manage a synchronisation flag. Update the .pushsection flags to reflect the actual mapping attributes. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: assembler: Change order of macro arguments in phys_to_ttbrWill Deacon1-3/+3
Since AArch64 assembly instructions take the destination register as their first operand, do the same thing for the phys_to_ttbr macro. Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: kpti: Add ->enable callback to remap swapper using nG mappingsWill Deacon1-8/+196
Defaulting to global mappings for kernel space is generally good for performance and appears to be necessary for Cavium ThunderX. If we subsequently decide that we need to enable kpti, then we need to rewrite our existing page table entries to be non-global. This is fiddly, and made worse by the possible use of contiguous mappings, which require a strict break-before-make sequence. Since the enable callback runs on each online CPU from stop_machine context, we can have all CPUs enter the idmap, where secondaries can wait for the primary CPU to rewrite swapper with its MMU off. It's all fairly horrible, but at least it only runs once. Tested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06arm64: mm: Permit transitioning from Global to Non-Global without BBMWill Deacon1-0/+4
Break-before-make is not needed when transitioning from Global to Non-Global mappings, provided that the contiguous hint is not being used. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-06Merge tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds1-3/+6
Pull libnvdimm updates from Ross Zwisler: - Require struct page by default for filesystem DAX to remove a number of surprising failure cases. This includes failures with direct I/O, gdb and fork(2). - Add support for the new Platform Capabilities Structure added to the NFIT in ACPI 6.2a. This new table tells us whether the platform supports flushing of CPU and memory controller caches on unexpected power loss events. - Revamp vmem_altmap and dev_pagemap handling to clean up code and better support future future PCI P2P uses. - Deprecate the ND_IOCTL_SMART_THRESHOLD command whose payload has become out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL spec, and instead rely on the generic ND_CMD_CALL approach used by the two other IOCTL families, NVDIMM_FAMILY_{HPE,MSFT}. - Enhance nfit_test so we can test some of the new things added in version 1.6 of the DSM specification. This includes testing firmware download and simulating the Last Shutdown State (LSS) status. * tag 'libnvdimm-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (37 commits) libnvdimm, namespace: remove redundant initialization of 'nd_mapping' acpi, nfit: fix register dimm error handling libnvdimm, namespace: make min namespace size 4K tools/testing/nvdimm: force nfit_test to depend on instrumented modules libnvdimm/nfit_test: adding support for unit testing enable LSS status libnvdimm/nfit_test: add firmware download emulation nfit-test: Add platform cap support from ACPI 6.2a to test libnvdimm: expose platform persistence attribute for nd_region acpi: nfit: add persistent memory control flag for nd_region acpi: nfit: Add support for detect platform CPU cache flush on power loss device-dax: Fix trailing semicolon libnvdimm, btt: fix uninitialized err_lock dax: require 'struct page' by default for filesystem dax ext2: auto disable dax instead of failing mount ext4: auto disable dax instead of failing mount mm, dax: introduce pfn_t_special() mm: Fix devm_memremap_pages() collision handling mm: Fix memory size alignment in devm_memremap_pages_release() memremap: merge find_dev_pagemap into get_dev_pagemap memremap: change devm_memremap_pages interface to use struct dev_pagemap ...
2018-02-01Merge branch 'x86/hyperv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipRadim Krčmář3-5/+5
Topic branch for stable KVM clockource under Hyper-V. Thanks to Christoffer Dall for resolving the ARM conflict.
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds2-55/+15
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-30Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds1-57/+57
Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-30Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds7-113/+142
Pull arm64 updates from Catalin Marinas: "The main theme of this pull request is security covering variants 2 and 3 for arm64. I expect to send additional patches next week covering an improved firmware interface (requires firmware changes) for variant 2 and way for KPTI to be disabled on unaffected CPUs (Cavium's ThunderX doesn't work properly with KPTI enabled because of a hardware erratum). Summary: - Security mitigations: - variant 2: invalidate the branch predictor with a call to secure firmware - variant 3: implement KPTI for arm64 - 52-bit physical address support for arm64 (ARMv8.2) - arm64 support for RAS (firmware first only) and SDEI (software delegated exception interface; allows firmware to inject a RAS error into the OS) - perf support for the ARM DynamIQ Shared Unit PMU - CPUID and HWCAP bits updated for new floating point multiplication instructions in ARMv8.4 - remove some virtual memory layout printks during boot - fix initial page table creation to cope with larger than 32M kernel images when 16K pages are enabled" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (104 commits) arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mm arm64: Turn on KPTI only on CPUs that need it arm64: Branch predictor hardening for Cavium ThunderX2 arm64: Run enable method for errata work arounds on late CPUs arm64: Move BP hardening to check_and_switch_context arm64: mm: ignore memory above supported physical address size arm64: kpti: Fix the interaction between ASID switching and software PAN KVM: arm64: Emulate RAS error registers and set HCR_EL2's TERR & TEA KVM: arm64: Handle RAS SErrors from EL2 on guest exit KVM: arm64: Handle RAS SErrors from EL1 on guest exit KVM: arm64: Save ESR_EL2 on guest SError KVM: arm64: Save/Restore guest DISR_EL1 KVM: arm64: Set an impdef ESR for Virtual-SError using VSESR_EL2. KVM: arm/arm64: mask/unmask daif around VHE guests arm64: kernel: Prepare for a DISR user arm64: Unconditionally enable IESB on exception entry/return for firmware-first arm64: kernel: Survive corrected RAS errors notified by SError arm64: cpufeature: Detect CPU RAS Extentions arm64: sysreg: Move to use definitions for all the SCTLR bits arm64: cpufeature: __this_cpu_has_cap() shouldn't stop early ...
2018-01-26arm64: Fix TTBR + PAN + 52-bit PA logic in cpu_do_switch_mmSteve Capper1-3/+3
In cpu_do_switch_mm(.) with ARM64_SW_TTBR0_PAN=y we apply phys_to_ttbr to a value that already has an ASID inserted into the upper bits. For 52-bit PA configurations this then can give us TTBR0_EL1 registers that cause translation table walks to attempt to access non-zero PA[51:48] spuriously. Ultimately leading to a Synchronous External Abort on level 1 translation. This patch re-arranges the logic in cpu_do_switch_mm(.) such that phys_to_ttbr is called before the ASID is inserted into the TTBR0 value. Fixes: 6b88a32c7af6 ("arm64: kpti: Fix the interaction between ASID switching and software PAN") Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Kristina Martsenko <kristina.martsenko@arm.com> Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.