| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull crypto fix from Herbert Xu:
"This fixes a performance regression in arm64 NEON crypto as well as a
crash in x86 aegis/morus on unsupported CPUs"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/aegis,morus - Fix and simplify CPUID checks
crypto: arm64 - revert NEON yield for fast AEAD implementations
|
|
As it turns out, checking the TIF_NEED_RESCHED flag after each
iteration results in a significant performance regression (~10%)
when running fast algorithms (i.e., ones that use special instructions
and operate in the < 4 cycles per byte range) on in-order cores with
comparatively slow memory accesses such as the Cortex-A53.
Given the speed of these ciphers, and the fact that the page based
nature of the AEAD scatterwalk API guarantees that the core NEON
transform is never invoked with more than a single page's worth of
input, we can estimate the worst case duration of any resulting
scheduling blackout: on a 1 GHz Cortex-A53 running with 64k pages,
processing a page's worth of input at 4 cycles per byte results in
a delay of ~250 us, which is a reasonable upper bound.
So let's remove the yield checks from the fused AES-CCM and AES-GCM
routines entirely.
This reverts commit 7b67ae4d5ce8e2f912377f5fbccb95811a92097f and
partially reverts commit 7c50136a8aba8784f07fb66a950cc61a7f3d2ee3.
Fixes: 7c50136a8aba ("crypto: arm64/aes-ghash - yield NEON after every ...")
Fixes: 7b67ae4d5ce8 ("crypto: arm64/aes-ccm - yield NEON after every ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull arm64 regression fix from Will Deacon:
"Ard found a nasty arm64 regression in 4.18 where the AES ghash/gcm
code doesn't notify the kernel about its use of the vector registers,
therefore potentially corrupting live user state.
The fix is straightforward and Herbert agreed for it to go via arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair
|
|
Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and
data segments") tried to initialize various left-over ad-hoc vma's
"properly", but actually made things worse for the temporary vma's used
for TLB flushing.
vma_init() doesn't actually initialize all of the vma, just a few
fields, so doing something like
- struct vm_area_struct vma = { .vm_mm = tlb->mm, };
+ struct vm_area_struct vma;
+
+ vma_init(&vma, tlb->mm);
was actually very bad: instead of having a nicely initialized vma with
every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma
with only a couple of fields initialized. And they weren't even fields
that the code in question mostly cared about.
The flush_tlb_range() function takes a "struct vma" rather than a
"struct mm_struct", because a few architectures actually care about what
kind of range it is - being able to only do an ITLB flush if it's a
range that doesn't have data accesses enabled, for example. And all the
normal users already have the vma for doing the range invalidation.
But a few people want to call flush_tlb_range() with a range they just
made up, so they also end up using a made-up vma. x86 just has a
special "flush_tlb_mm_range()" function for this, but other
architectures (arm and ia64) do the "use fake vma" thing instead, and
thus got caught up in the vma_init() changes.
At the same time, the TLB flushing code really doesn't care about most
other fields in the vma, so vma_init() is just unnecessary and
pointless.
This fixes things by having an explicit "this is just an initializer for
the TLB flush" initializer macro, which is used by the arm/arm64/ia64
people who mis-use this interface with just a dummy vma.
Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Calling pmull_gcm_encrypt_block() requires kernel_neon_begin() and
kernel_neon_end() to be used since the routine touches the NEON
register file. Add the missing calls.
Also, since NEON register contents are not preserved outside of
a kernel mode NEON region, pass the key schedule array again.
Fixes: 7c50136a8aba ("crypto: arm64/aes-ghash - yield NEON after every ...")
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kvm, mm: account shadow page tables to kmemcg
zswap: re-check zswap_is_full() after do zswap_shrink()
include/linux/eventfd.h: include linux/errno.h
mm: fix vma_is_anonymous() false-positives
mm: use vma_init() to initialize VMAs on stack and data segments
mm: introduce vma_init()
mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL
ipc/sem.c: prevent queue.status tearing in semop
mm: disallow mappings that conflict for devm_memremap_pages()
kasan: only select SLUB_DEBUG with SYSFS=y
delayacct: fix crash in delayacct_blkio_end() after delayacct init failure
|
|
Make sure to initialize all VMAs properly, not only those which come
from vm_area_cachep.
Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Arnd reports the following arm64 randconfig build error with the PSI
patches that add another page flag:
/git/arm-soc/arch/arm64/mm/init.c: In function 'mem_init':
/git/arm-soc/include/linux/compiler.h:357:38: error: call to
'__compiletime_assert_618' declared with attribute error: BUILD_BUG_ON
failed: sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)
The additional page flag causes other information stored in
page->flags to get bumped into their own struct page member:
#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <=
BITS_PER_LONG - NR_PAGEFLAGS
#define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT
#else
#define LAST_CPUPID_WIDTH 0
#endif
#if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0
#define LAST_CPUPID_NOT_IN_PAGE_FLAGS
#endif
which in turn causes the struct page size to exceed the size set in
STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the
VMEMMAP page array according to address space and struct page size.
However, the check is performed - and triggers here - on a !VMEMMAP
config, which consumes an additional 22 page bits for the sparse
section id. When VMEMMAP is enabled, those bits are returned, cpupid
doesn't need its own member, and the page passes the VMEMMAP check.
Restrict that check to the situation it was meant to check: that we
are sizing the VMEMMAP page array correctly.
Says Arnd:
Further experiments show that the build error already existed before,
but was only triggered with larger values of CONFIG_NR_CPU and/or
CONFIG_NODES_SHIFT that might be used in actual configurations but
not in randconfig builds.
With longer CPU and node masks, I could recreate the problem with
kernels as old as linux-4.7 when arm64 NUMA support got added.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.")
Fixes: 3e1907d5bf5a ("arm64: mm: move vmemmap region right below the linear region")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Since commit d3aec8a28be3b8 ("arm64: capabilities: Restrict KPTI
detection to boot-time CPUs") we rely on errata flags being already
populated during feature enumeration. The order of errata and
features was flipped as part of commit ed478b3f9e4a ("arm64:
capabilities: Group handling of features and errata workarounds").
Return to the orginal order of errata and feature evaluation to
ensure errata flags are present during feature evaluation.
Fixes: ed478b3f9e4a ("arm64: capabilities: Group handling of
features and errata workarounds")
CC: Suzuki K Poulose <suzuki.poulose@arm.com>
CC: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
It does not matter if the caller of may_use_simd() migrates to
another cpu after the call, but it is still important that the
kernel_neon_busy percpu instance that is read matches the cpu the
task is running on at the time of the read.
This means that raw_cpu_read() is not sufficient. kernel_neon_busy
may appear true if the caller migrates during the execution of
raw_cpu_read() and the next task to be scheduled in on the initial
cpu calls kernel_neon_begin().
This patch replaces raw_cpu_read() with this_cpu_read() to protect
against this race.
Cc: <stable@vger.kernel.org>
Fixes: cb84d11e1625 ("arm64: neon: Remove support for nested or hardirq kernel-mode NEON")
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Yandong Zhao <yandong77520@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
This reverts commit 38fc4248677552ce35efc09902fdcb06b61d7ef9.
Distributions such as Fedora and Debian do not package the ELF linker
scripts with their toolchains, resulting in kernel build failures such
as:
| CHK include/generated/compile.h
| LD [M] arch/arm64/crypto/sha512-ce.o
| aarch64-linux-gnu-ld: cannot open linker script file ldscripts/aarch64elf.xr: No such file or directory
| make[1]: *** [scripts/Makefile.build:530: arch/arm64/crypto/sha512-ce.o] Error 1
| make: *** [Makefile:1029: arch/arm64/crypto] Error 2
Revert back to the linux targets for now, adding a comment to the Makefile
so we don't accidentally break this in the future.
Cc: Paul Kocialkowski <contact@paulk.fr>
Cc: <stable@vger.kernel.org>
Fixes: 38fc42486775 ("arm64: Use aarch64elf and aarch64elfb emulation mode variants")
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Linking the ARM64 defconfig kernel with LLVM lld fails with the error:
ld.lld: error: unknown argument: -p
Makefile:1015: recipe for target 'vmlinux' failed
Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.
After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM. binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored. A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".
Since this flag is a no-op on ARM64, we can safely drop it.
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
With the recent syntax extension, Kconfig is now able to evaluate the
compiler / toolchain capability.
However, accumulating flags to 'LD' is not compatible with the way
it works; 'LD' must be passed to Kconfig to call $(ld-option,...)
from Kconfig files. If you tweak 'LD' in arch Makefile depending on
CONFIG_CPU_BIG_ENDIAN, this would end up with circular dependency
between Makefile and Kconfig.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The aarch64linux and aarch64linuxb emulation modes are not supported by
bare-metal toolchains and Linux using them forbids building the kernel
with these toolchains.
Since there is apparently no reason to target these emulation modes, the
more generic elf modes are used instead, allowing to build on bare-metal
toolchains as well as the already-supported ones.
Fixes: 3d6a7b99e3fa ("arm64: ensure the kernel is compiled for LP64")
Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A smaller batch for the end of the week (let's see if I can keep the
weekly cadence going for once).
All medium-grade fixes here, nothing worrisome:
- Fixes for some fairly old bugs around SD card write-protect
detection and GPIO interrupt assignments on Davinci.
- Wifi module suspend fix for Hikey.
- Minor DT tweaks to fix inaccuracies for Amlogic platforms, one
of which solves booting with third-party u-boot"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
ARM64: dts: meson-gxl: fix Mali GPU compatible string
ARM64: dts: meson-axg: fix ethernet stability issue
ARM64: dts: meson-gx: fix ATF reserved memory region
ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
ARM64: dts: meson: fix register ranges for SD/eMMC
ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
ARM: dts: da850: Fix interrups property for gpio
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
|
|
ARM64: hisi fixes for 4.18
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
* tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Amlogic fixes for v4.18-rc
- minor 64-bit DT fixes
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: meson-gxl: fix Mali GPU compatible string
ARM64: dts: meson-axg: fix ethernet stability issue
ARM64: dts: meson-gx: fix ATF reserved memory region
ARM64: dts: meson-gxl-s905x-p212: Add phy-supply for usb0
ARM64: dts: meson: fix register ranges for SD/eMMC
ARM64: dts: meson: disable sd-uhs modes on the libretech-cc
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull arm64 fixes from Catalin Marinas:
- The alternatives patching code uses flush_icache_range() which itself
uses alternatives. Change the code to use an unpatched variant of
cache maintenance
- Remove unnecessary ISBs from set_{pte,pmd,pud}
- perf: xgene_pmu: Fix IOB SLOW PMU parser error
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}
arm64: Avoid flush_icache_range() in alternatives patching code
drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser error
|
|
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES. This fixes
a regression found here: https://lkml.org/lkml/2018/6/12/930
Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES.
Fixes: 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
|
|
meson-gxl-mali.dtsi is only used on GXL SoCs. Thus it should use the GXL
specific compatible string instead of the GXBB one.
For now this is purely cosmetic since the (out-of-tree) lima driver for
this GPU currently uses the "arm,mali-450" match instead of the SoC
specific one. However, update the .dts to match the documentation since
this driver behavior might change in the future.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Like the odroid-c2 and wetek, the s400 uses the RTL8211F and seems to
suffer from the kind of stability issue.
Doing an iperf3 download test, we can see a significant number of LPI
interrupts on the tx path. After a short while (5 to 15 seconds), the
network connection dies. If using rootfs over NFS, the connection may
also break during the boot sequence.
We still don't have a real explanation for this problem so let's disable
EEE once again.
Fixes: f6f6ac914b82 ("ARM64: dts: meson-axg: enable ethernet for A113D S400 board")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Vendor firmware/uboot has different reserved regions depending on
firmware version, but current codebase reserves the same regions on
GXL and GXBB, so move the additional reserved memory region to common
.dtsi.
Found when putting a recent vendor u-boot on meson-gxbb-p200.
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Like LibreTech-CC, the USB0 needs the 5V regulator to be enabled to power the
devices on the P212 Reference Design based boards.
Fixes: b9f07cb4f41f ("ARM64: dts: meson-gxl-s905x-p212: enable the USB controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Based on updated information from Amlogic, correct the register range
for the SD/eMMC blocks to the right size.
Reported-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
There is a problem with the sd-uhs mode when doing a soft reboot.
Switching back from 1.8v to 3.3v messes with the card, which no longer
respond (timeout errors). According to the specification, we should
perform a card reset (power cycling the card) but this is something we
cannot control on this design.
Then the only solution to restore the communication with the card is an
"unplug-plug" which is not acceptable
Until we find a solution, if any, disable the sd-uhs modes on this design.
For the people using uhs at the moment, there will a performance drop as
a result.
Fixes: 3cde63ebc85c ("ARM64: dts: meson-gxl: libretech-cc: enable high speed modes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit 7f0b1bf04511 ("arm64: Fix barriers used for page table modifications")
fixed a reported issue with fixmap page-table entries not being visible
to the walker due to a missing DSB instruction. At the same time, it added
ISB instructions to the arm64 set_{pte,pmd,pud} functions, which are not
required by the architecture and make little sense in isolation.
Remove the redundant ISBs.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The implementation of flush_icache_range() includes instruction sequences
which are themselves patched at runtime, so it is not safe to call from
the patching framework.
This patch reworks the alternatives cache-flushing code so that it rolls
its own internal D-cache maintenance using DC CIVAC before invalidating
the entire I-cache after all alternatives have been applied at boot.
Modules don't cause any issues, since flush_icache_range() is safe to
call by the time they are loaded.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Rohit Khanna <rokhanna@nvidia.com>
Cc: Alexander Van Brunt <avanbrunt@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes, nothing really concerning and most touching
devicetree files for various platforms.
I also regenerated the shared multiplatform defconfigs; they have
drifted quite a bit due to Kconfig changes and reordering, and several
platform maintainers tried doing the same which resulted in a lot of
conflict pain -- this way we get everybody onto the same base for next
merge window"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
arm64: dts: uniphier: fix widget name of headphone for LD11/LD20 boards
ARM: dts: Fix SPI node for Arria10
arm64: dts: stratix10: Fix SPI nodes for Stratix10
qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency
ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build
ARM: multi_v7_defconfig: renormalize based on recent additions
arm64: defconfig: renormalize based on recent additions
arm64: dts: msm8916: fix Coresight ETF graph connections
arm64: dts: apq8096-db820c: disable uart0 by default
ARM: dts: imx6sx: fix irq for pcie bridge
arm64: dts: Stingray: Fix I2C controller interrupt type
arm64: dts: ns2: Fix PCIe controller interrupt type
arm64: dts: ns2: Fix I2C controller interrupt type
arm64: dts: specify 1.8V EMMC capabilities for bcm958742t
arm64: dts: specify 1.8V EMMC capabilities for bcm958742k
ARM: dts: Cygnus: Fix PCIe controller interrupt type
ARM: dts: Cygnus: Fix I2C controller interrupt type
ARM: dts: BCM5301x: Fix i2c controller interrupt type
ARM: dts: HR2: Fix interrupt types for i2c and PCIe
ARM: dts: NSP: Fix PCIe controllers interrupt types
...
|
|
This patch fixes wrong name of headphone widget for receiving events
of insert/remove headphone plug from simple-card or audio-graph-card.
If we use wrong widget name then we get warning messages such as
"asoc-audio-graph-card sound: ASoC: DAPM unknown pin Headphones"
when the plug is inserted or removed from headphone jack.
Fixes: fb21a0acaa2b7 ("arm64: dts: uniphier: add sound node")
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Remove the unused bus-num node and change num-chipselect
to num-cs to match SPI bindings.
Cc: stable@vger.kernel.org
Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi")
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull crypto fixes from Herbert Xu:
- Fix use after free in chtls
- Fix RBP breakage in sha3
- Fix use after free in hwrng_unregister
- Fix overread in morus640
- Move sleep out of kernel_neon in arm64/aes-blk
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: core - Always drop the RNG in hwrng_unregister()
crypto: morus640 - Fix out-of-bounds access
crypto: don't optimize keccakf()
crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end
crypto: chtls - use after free in chtls_pt_recvmsg()
|
|
The defconfig has drifted over time, as Kconfig entries have changed order
or default values. Several maintainers ended up running 'savedefconfig'
themselves which caused a cascade of conflicts. Let's do it once and
for all in our tree before -rc2 instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Qualcomm Fixes for v4.18-rc1
* Fix coresight graph on msm8916
* Disable uart0 on db820c by default
* tag 'qcom-fixes-for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: msm8916: fix Coresight ETF graph connections
arm64: dts: apq8096-db820c: disable uart0 by default
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 4.18, please pull the following:
- Scott fixes both the bcm958742k and bcm958742t reference boards to
have the correct eMMC voltage specified
- Ray fixes the I2C and PCIe Device Tree nodes interrupt specifiers for
Northstar 2 and Stingray SoCs.
* tag 'arm-soc/for-4.18/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: Stingray: Fix I2C controller interrupt type
arm64: dts: ns2: Fix PCIe controller interrupt type
arm64: dts: ns2: Fix I2C controller interrupt type
arm64: dts: specify 1.8V EMMC capabilities for bcm958742t
arm64: dts: specify 1.8V EMMC capabilities for bcm958742k
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
mvebu fixes for 4.17 (part 2)
- Use correct size for ICU nodes (irq controller) on Armada 7K/8K
- Fix "#cooling-cells" property's name on Synology DS116 (Armada 385)
* tag 'mvebu-fixes-4.17-2' of git://git.infradead.org/linux-mvebu:
arm: dts: armada: Fix "#cooling-cells" property's name
arm64: dts: marvell: fix CP110 ICU node size
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull arm64 fixes from Catalin Marinas:
- clear buffers allocated with FORCE_CONTIGUOUS explicitly until the
CMA code honours __GFP_ZERO
- notrace annotation for secondary_start_kernel()
- use early_param() instead of __setup() for "kpti=" as it is needed
for the cpufeature callback remapping swapper to non-global mappings
- ensure writes to swapper are ordered wrt subsequent cache maintenance
in the kpti non-global remapping code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Ensure writes to swapper are ordered wrt subsequent cache maintenance
arm64: kpti: Use early_param for kpti= command-line option
arm64: make secondary_start_kernel() notrace
arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag
|
|
The ETF input should be connected to the funnel output, and the ETF
output should be connected to the replicator input. The labels are wrong
and these got swapped:
Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Access to UART0 is disabled by bootloaders. By leaving it enabled by
default would reboot the board.
Disable this for now, this would alteast give a board which boots.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
When rewriting swapper using nG mappings, we must performance cache
maintenance around each page table access in order to avoid coherency
problems with the host's cacheable alias under KVM. To ensure correct
ordering of the maintenance with respect to Device memory accesses made
with the Stage-1 MMU disabled, DMBs need to be added between the
maintenance and the corresponding memory access.
This patch adds a missing DMB between writing a new page table entry and
performing a clean+invalidate on the same line.
Fixes: f992b4dfd58b ("arm64: kpti: Add ->enable callback to remap swapper using nG mappings")
Cc: <stable@vger.kernel.org> # 4.16.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We inspect __kpti_forced early on as part of the cpufeature enable
callback which remaps the swapper page table using non-global entries.
Ensure that __kpti_forced has been updated to reflect the kpti=
command-line option before we start using it.
Fixes: ea1e3de85e94 ("arm64: entry: Add fake CPU feature for unmapping the kernel at EL0")
Cc: <stable@vger.kernel.org> # 4.16.x-
Reported-by: Wei Xu <xuwei5@hisilicon.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce
guest/host thrashing") uses fpsimd_save() to save the FPSIMD state
for a vcpu when scheduling the vcpu out. However, currently
current's value of TIF_SVE is restored before calling fpsimd_save()
which means that fpsimd_save() may erroneously attempt to save SVE
state from the vcpu. This enables current's vector state to be
polluted with guest data. current->thread.sve_state may be
unallocated or not large enough, so this can also trigger a NULL
dereference or buffer overrun.
Instead of this, TIF_SVE should be configured properly for the
guest when calling fpsimd_save() with the vcpu context loaded.
This patch ensures this by delaying restoration of current's
TIF_SVE until after the call to fpsimd_save().
Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce
guest/host thrashing") attempts to restore the configuration of
userspace SVE trapping via a call to fpsimd_bind_task_to_cpu(), but
the logic for determining when to do this is not correct.
The patch makes the errnoenous assumption that the only task that
may try to enter userspace with the currently loaded FPSIMD/SVE
register content is current. This may not be the case however: if
some other user task T is scheduled on the CPU during the execution
of the KVM run loop, and the vcpu does not try to use the registers
in the meantime, then T's state may be left there intact. If T
happens to be the next task to enter userspace on this CPU then the
hooks for reloading the register state and configuring traps will
be skipped.
(Also, current never has SVE state at this point anyway and should
always have the trap enabled, as a side-effect of the ioctl()
syscall needed to reach the KVM run loop in the first place.)
This patch instead restores the state of the EL0 trap from the
state observed at the most recent vcpu_load(), ensuring that the
trap is set correctly for the loaded context (if any).
Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Commit e6b673b ("KVM: arm64: Optimise FPSIMD handling to reduce
guest/host thrashing") introduces a specific helper
kvm_arch_vcpu_put_fp() for saving the vcpu FPSIMD state during
vcpu_put().
This function uses local_bh_disable()/_enable() to protect the
FPSIMD context manipulation from interruption by softirqs.
This approach is not correct, because vcpu_put() can be invoked
either from the KVM host vcpu thread (when exiting the vcpu run
loop), or via a preempt notifier. In the former case, only
preemption is disabled. In the latter case, the function is called
from inside __schedule(), which means that IRQs are disabled.
Use of local_bh_disable()/_enable() with IRQs disabled is considerd
an error, resulting in lockdep splats while running VMs if lockdep
is enabled.
This patch disables IRQs instead of attempting to disable softirqs,
avoiding the problem of calling local_bh_enable() with IRQs
disabled in the __schedule() path. This creates an additional
interrupt blackout during vcpu run loop exit, but this is the rare
case and the blackout latency is still less than that of
__schedule().
Fixes: e6b673b741ea ("KVM: arm64: Optimise FPSIMD handling to reduce guest/host thrashing")
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Currently we have a couple of helpers to manipulate bits in particular
sysregs:
* config_sctlr_el1(u32 clear, u32 set)
* change_cpacr(u64 val, u64 mask)
The parameters of these differ in naming convention, order, and size,
which is unfortunate. They also differ slightly in behaviour, as
change_cpacr() skips the sysreg write if the bits are unchanged, which
is a useful optimization when sysreg writes are expensive.
Before we gain yet another sysreg manipulation function, let's
unify these with a common helper, providing a consistent order for
clear/set operands, and the write skipping behaviour from
change_cpacr(). Code will be migrated to the new helper in subsequent
patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
We can't call function trace hook before setup percpu offset.
When entering secondary_start_kernel(), percpu offset has not
been initialized. So this lead hotplug malfunction.
Here is the flow to reproduce this bug:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo function > /sys/kernel/debug/tracing/current_tracer
echo 1 > /sys/kernel/debug/tracing/tracing_on
echo 1 > /sys/devices/system/cpu/cpu1/online
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Zhizhou Zhang <zhizhouzhang@asrmicro.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
dma_alloc_*() buffers might be exposed to userspace via mmap() call, so
they should be cleared on allocation. In case of IOMMU-based dma-mapping
implementation such buffer clearing was missing in the code path for
DMA_ATTR_FORCE_CONTIGUOUS flag handling, because dma_alloc_from_contiguous()
doesn't honor __GFP_ZERO flag. This patch fixes this issue. For more
information on clearing buffers allocated by dma_alloc_* functions,
see commit 6829e274a623 ("arm64: dma-mapping: always clear allocated
buffers").
Fixes: 44176bb38fa4 ("arm64: Add support for DMA_ATTR_FORCE_CONTIGUOUS to IOMMU")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
Stingray SoC.
Fixes: 1256ea18875d ("arm64: dts: Add I2C DT nodes for Stingray SoC")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Fix PCIe controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom
NS2 SoC.
Fixes: fd5e5dd56a2f ("arm64: dts: Add PCIe0 and PCIe4 DT nodes for NS2")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Fix I2C controller interrupt to use IRQ_TYPE_LEVEL_HIGH for Broadcom NS2
SoC.
Fixes: 7ac674e8df7a ("arm64: dts: Add I2C nodes for NS2")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
Linus Torvalds
Ard Biesheuvel
Kirill A. Shutemov
Johannes Weiner
Dirk Mueller
Yandong Zhao
Laura Abbott
Greg Hackmann
Masahiro Yamada
Paul Kocialkowski
Olof Johansson
oscardagrach
Martin Blumenstingl
Jerome Brunet
Kevin Hilman
Neil Armstrong
Will Deacon
Katsuhiro Suzuki
Thor Thayer
Rob Herring
Srinivas Kandagatla
Dave Martin
Mark Rutland
Zhizhou Zhang
Marek Szyprowski
Ray Jui