| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull ARM SoC fixes from Arnd Bergmann:
"One more set of simple ARM platform fixes:
- A boot regression on qualcomm msm8998
- Gemini display controllers got turned off by accident
- incorrect reference counting in optee"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
tee: optee: add missing of_node_put after of_device_is_available
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
ARM: dts: gemini: Re-enable display controller
|
|
Pull more crypto fixes from Herbert Xu:
"This fixes a couple of issues in arm64/chacha that was introduced in
5.0"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/chacha - fix hchacha_block_neon() for big endian
crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian
|
|
Qualcomm ARM64 Fixes for 5.0-rc8
* Fix TZ memory area size to avoid crashes during boot
* tag 'qcom-fixes-for-5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: qcom: msm8998: Extend TZ reserved memory area
|
|
On big endian arm64 kernels, the xchacha20-neon and xchacha12-neon
self-tests fail because hchacha_block_neon() outputs little endian words
but the C code expects native endianness. Fix it to output the words in
native endianness (which also makes it match the arm32 version).
Fixes: cc7cf991e9eb ("crypto: arm64/chacha20 - add XChaCha20 support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The change to encrypt a fifth ChaCha block using scalar instructions
caused the chacha20-neon, xchacha20-neon, and xchacha12-neon self-tests
to start failing on big endian arm64 kernels. The bug is that the
keystream block produced in 32-bit scalar registers is directly XOR'd
with the data words, which are loaded and stored in native endianness.
Thus in big endian mode the data bytes end up XOR'd with the wrong
bytes. Fix it by byte-swapping the keystream words in big endian mode.
Fixes: 2fe55987b262 ("crypto: arm64/chacha - use combined SIMD/ALU routine for more speed")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
My console locks up as soon as Linux writes to [88800000,88f00000[
AFAIU, that memory area is reserved for trustzone.
Extend TZ reserved memory range, to prevent Linux from stepping on
trustzone's toes.
Cc: stable@vger.kernel.org # 4.20+
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Fixes: c7833949564ec ("arm64: dts: qcom: msm8998: Add smem related nodes")
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"Only a handful of device tree fixes, all simple enough:
NVIDIA Tegra:
- Fix a regression for booting on chromebooks
TI OMAP:
- Two fixes PHY mode on am335x reference boards
Marvell mvebu:
- A regression fix for Armada XP NAND flash controllers
- An incorrect reset signal on the clearfog board"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: tegra: Restore DT ABI on Tegra124 Chromebooks
ARM: dts: am335x-evm: Fix PHY mode for ethernet
ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
ARM: dts: armada-xp: fix Armada XP boards NAND description
|
|
mvebu fixes for 5.0 (part 2)
Fix PHY reset signal on clearfog gt 8K (Armada 8040 based)
Fix NAND description on Armada XP boards which was broken since a few
release
* tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
ARM: dts: armada-xp: fix Armada XP boards NAND description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull late arm64 fixes from Will Deacon:
"Three small arm64 fixes for 5.0.
They fix a build breakage with clang introduced in 4.20, an oversight
in our sigframe restoration relating to the SSBS bit and a boot fix
for systems with newer revisions of our interrupt controller.
Summary:
- Fix handling of PSTATE.SSBS bit in sigreturn()
- Fix version checking of the GIC during early boot
- Fix clang builds failing due to use of NEON in the crypto code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Relax GIC version check during early boot
arm64/neon: Disable -Wincompatible-pointer-types when building with Clang
arm64: fix SSBS sanitization
|
|
There are two issues with assigning random percpu seeds right now:
1. We use for_each_possible_cpu() to iterate over cpus, but cpumask is
not set up yet at the moment of kasan_init(), and thus we only set
the seed for cpu #0.
2. A call to get_random_u32() always returns the same number and produces
a message in dmesg, since the random subsystem is not yet initialized.
Fix 1 by calling kasan_init_tags() after cpumask is set up.
Fix 2 by using get_cycles() instead of get_random_u32(). This gives us
lower quality random numbers, but it's good enough, as KASAN is meant to
be used as a debugging tool and not a mitigation.
Link: http://lkml.kernel.org/r/1f815cc914b61f3516ed4cc9bfd9eeca9bd5d9de.1550677973.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have
values other than 0 or 1. At the moment, Linux is quite strict in the
way it handles this field at early boot stage (cpufeature is fine) and
will refuse to use the system register CPU interface if it doesn't
find the value 1.
Fixes: 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
Reported-by: Chase Conklin <Chase.Conklin@arm.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The PHY reset signal goes to mpp43 on CP0.
Fixes: babc5544c293 ("arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal")
Reported-by: Denis Odintsov <oversun@me.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
After commit cc9f8349cb33 ("arm64: crypto: add NEON accelerated XOR
implementation"), Clang builds for arm64 started failing with the
following error message.
arch/arm64/lib/xor-neon.c:58:28: error: incompatible pointer types
assigning to 'const unsigned long *' from 'uint64_t *' (aka 'unsigned
long long *') [-Werror,-Wincompatible-pointer-types]
v3 = veorq_u64(vld1q_u64(dp1 + 6), vld1q_u64(dp2 + 6));
^~~~~~~~
/usr/lib/llvm-9/lib/clang/9.0.0/include/arm_neon.h:7538:47: note:
expanded from macro 'vld1q_u64'
__ret = (uint64x2_t) __builtin_neon_vld1q_v(__p0, 51); \
^~~~
There has been quite a bit of debate and triage that has gone into
figuring out what the proper fix is, viewable at the link below, which
is still ongoing. Ard suggested disabling this warning with Clang with a
pragma so no neon code will have this type of error. While this is not
at all an ideal solution, this build error is the only thing preventing
KernelCI from having successful arm64 defconfig and allmodconfig builds
on linux-next. Getting continuous integration running is more important
so new warnings/errors or boot failures can be caught and fixed quickly.
Link: https://github.com/ClangBuiltLinux/linux/issues/283
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
In valid_user_regs() we treat SSBS as a RES0 bit, and consequently it is
unexpectedly cleared when we restore a sigframe or fiddle with GPRs via
ptrace.
This patch fixes valid_user_regs() to account for this, updating the
function to refer to the latest ARM ARM (ARM DDI 0487D.a). For AArch32
tasks, SSBS appears in bit 23 of SPSR_EL1, matching its position in the
AArch32-native PSR format, and we don't need to translate it as we have
to for DIT.
There are no other bit assignments that we need to account for today.
As the recent documentation describes the DIT bit, we can drop our
comment regarding DIT.
While removing SSBS from the RES0 masks, existing inconsistent
whitespace is corrected.
Fixes: d71be2b6c0e19180 ("arm64: cpufeature: Detect SSBS and advertise to userspace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Pull EFI fixes from Ingo Molnar:
"This tree reverts a GICv3 commit (which was broken) and fixes it in
another way, by adding a memblock build-time entries quirk for ARM64"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/arm: Revert "Defer persistent reservations until after paging_init()"
arm64, mm, efi: Account for GICv3 LPI tables in static memblock reserve table
|
|
Pull KVM fixes from Paolo Bonzini:
"A somewhat bigger ARM update, and the usual smattering of x86 bug
fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vmx: Fix entry number check for add_atomic_switch_msr()
KVM: x86: Recompute PID.ON when clearing PID.SN
KVM: nVMX: Restore a preemption timer consistency check
x86/kvm/nVMX: read from MSR_IA32_VMX_PROCBASED_CTLS2 only when it is available
KVM: arm64: Forbid kprobing of the VHE world-switch code
KVM: arm64: Relax the restriction on using stage2 PUD huge mapping
arm: KVM: Add missing kvm_stage2_has_pmd() helper
KVM: arm/arm64: vgic: Always initialize the group of private IRQs
arm/arm64: KVM: Don't panic on failure to properly reset system registers
arm/arm64: KVM: Allow a VCPU to fully reset itself
KVM: arm/arm64: Reset the VCPU without preemption and vcpu state loaded
arm64: KVM: Don't generate UNDEF when LORegion feature is present
KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_dist->lpi_list_lock a raw_spinlock
KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock
|
|
This reverts commit eff896288872d687d9662000ec9ae11b6d61766f, which
deferred the processing of persistent memory reservations to a point
where the memory may have already been allocated and overwritten,
defeating the purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the irqchip and EFI code, we have what basically amounts to a quirk
to work around a peculiarity in the GICv3 architecture, which permits
the system memory address of LPI tables to be programmable only once
after a CPU reset. This means kexec kernels must use the same memory
as the first kernel, and thus ensure that this memory has not been
given out for other purposes by the time the ITS init code runs, which
is not very early for secondary CPUs.
On systems with many CPUs, these reservations could overflow the
memblock reservation table, and this was addressed in commit:
eff896288872 ("efi/arm: Defer persistent reservations until after paging_init()")
However, this turns out to have made things worse, since the allocation
of page tables and heap space for the resized memblock reservation table
itself may overwrite the regions we are attempting to reserve, which may
cause all kinds of corruption, also considering that the ITS will still
be poking bits into that memory in response to incoming MSIs.
So instead, let's grow the static memblock reservation table on such
systems so it can accommodate these reservations at an earlier time.
This will permit us to revert the above commit in a subsequent patch.
[ mingo: Minor cleanups. ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
i.MX fixes for 5.0, 3rd round:
It contains a fix for i.MX8MQ EVK board device tree, which makes the
broken eMMC support work as expected.
* tag 'imx-fixes-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: Fix boot from eMMC
|
|
Fix for new dtc graph warnings and a regulator fix for rock64.
* tag 'v5.0-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64
arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
|
|
KVM/ARM fixes for 5.0:
- Fix the way we reset vcpus, plugging the race that could happen on VHE
- Fix potentially inconsistent group setting for private interrupts
- Don't generate UNDEF when LORegion feature is present
- Relax the restriction on using stage2 PUD huge mapping
- Turn some spinlocks into raw_spinlocks to help RT compliance
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"This is a bit larger than normal, as we had not managed to send out a
pull request before traveling for a week without my signing key.
There are multiple code fixes for older bugs, all of which should get
backported into stable kernels:
- tango: one fix for multiplatform configurations broken on other
platforms when tango is enabled
- arm_scmi: device unregistration fix
- iop32x: fix kernel oops from extraneous __init annotation
- pxa: remove a double kfree
- fsl qbman: close an interrupt clearing race
The rest is the usual collection of smaller fixes for device tree
files, on the renesas, allwinner, meson, omap, davinci, qualcomm and
imx platforms.
Some of these are for compile-time warnings, most are for board
specific functionality that fails to work because of incorrect
settings"
* tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: tango: Improve ARCH_MULTIPLATFORM compatibility
firmware: arm_scmi: provide the mandatory device release callback
ARM: iop32x/n2100: fix PCI IRQ mapping
arm64: dts: add msm8996 compatible to gicv3
ARM: dts: am335x-shc.dts: fix wrong cd pin level
ARM: dts: n900: fix mmc1 card detect gpio polarity
ARM: dts: omap3-gta04: Fix graph_port warning
ARM: pxa: ssp: unneeded to free devm_ allocated data
ARM: dts: r8a7743: Convert to new LVDS DT bindings
soc: fsl: qbman: avoid race in clearing QMan interrupt
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
ARM: dts: da850: fix interrupt numbers for clocksource
dt-bindings: imx8mq: Number clocks consecutively
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: imx6sx: correct backward compatible of gpt
ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property
ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
...
|
|
On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.
echo "p:weasel sysreg_save_guest_state_vhe" > /sys/kernel/debug/tracing/kprobe_events
echo 1 > /sys/kernel/debug/tracing/events/kprobes/weasel/enable
lkvm run -k /boot/Image --console serial -p "console=ttyS0 earlycon=uart,mmio,0x3f8"
# lkvm run -k /boot/Image -m 384 -c 3 --name guest-1474
Info: Placing fdt at 0x8fe00000 - 0x8fffffff
Info: virtio-mmio.devices=0x200@0x10000:36
Info: virtio-mmio.devices=0x200@0x10200:37
Info: virtio-mmio.devices=0x200@0x10400:38
[ 614.178186] Kernel panic - not syncing: HYP panic:
[ 614.178186] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004
[ 614.178186] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de
[ 614.178186] VCPU:00000000f8de32f1
[ 614.178383] CPU: 2 PID: 1482 Comm: kvm-vcpu-0 Not tainted 5.0.0-rc2 #10799
[ 614.178446] Call trace:
[ 614.178480] dump_backtrace+0x0/0x148
[ 614.178567] show_stack+0x24/0x30
[ 614.178658] dump_stack+0x90/0xb4
[ 614.178710] panic+0x13c/0x2d8
[ 614.178793] hyp_panic+0xac/0xd8
[ 614.178880] kvm_vcpu_run_vhe+0x9c/0xe0
[ 614.178958] kvm_arch_vcpu_ioctl_run+0x454/0x798
[ 614.179038] kvm_vcpu_ioctl+0x360/0x898
[ 614.179087] do_vfs_ioctl+0xc4/0x858
[ 614.179174] ksys_ioctl+0x84/0xb8
[ 614.179261] __arm64_sys_ioctl+0x28/0x38
[ 614.179348] el0_svc_common+0x94/0x108
[ 614.179401] el0_svc_handler+0x38/0x78
[ 614.179487] el0_svc+0x8/0xc
[ 614.179558] SMP: stopping secondary CPUs
[ 614.179661] Kernel Offset: disabled
[ 614.179695] CPU features: 0x003,2a80aa38
[ 614.179758] Memory Limit: none
[ 614.179858] ---[ end Kernel panic - not syncing: HYP panic:
[ 614.179858] PS:404003c9 PC:ffff0000100d70e0 ESR:f2000004
[ 614.179858] FAR:0000000080080000 HPFAR:0000000000800800 PAR:1d00007edbadc0de
[ 614.179858] VCPU:00000000f8de32f1 ]---
Annotate the VHE world-switch functions that aren't marked
__hyp_text using NOKPROBE_SYMBOL().
Signed-off-by: James Morse <james.morse@arm.com>
Fixes: 3f5c90b890ac ("KVM: arm64: Introduce VHE-specific kvm_vcpu_run")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Failing to properly reset system registers is pretty bad. But not
quite as bad as bringing the whole machine down... So warn loudly,
but slightly more gracefully.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
The current kvm_psci_vcpu_on implementation will directly try to
manipulate the state of the VCPU to reset it. However, since this is
not done on the thread that runs the VCPU, we can end up in a strangely
corrupted state when the source and target VCPUs are running at the same
time.
Fix this by factoring out all reset logic from the PSCI implementation
and forwarding the required information along with a request to the
target VCPU.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
We have two ways to reset a vcpu:
- either through VCPU_INIT
- or through a PSCI_ON call
The first one is easy to reason about. The second one is implemented
in a more bizarre way, as it is the vcpu that handles PSCI_ON that
resets the vcpu that is being powered-on. As we need to turn the logic
around and have the target vcpu to reset itself, we must take some
preliminary steps.
Resetting the VCPU state modifies the system register state in memory,
but this may interact with vcpu_load/vcpu_put if running with preemption
disabled, which in turn may lead to corrupted system register state.
Address this by disabling preemption and doing put/load if required
around the reset logic.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Calling strlen() on cmdline == NULL produces a kernel oops. Since having
a NULL cmdline is valid, handle this case explicitly.
Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
When 52-bit virtual addressing is enabled for userspace
(CONFIG_ARM64_USER_VA_BITS_52=y), the kernel continues to utilise 48-bit
virtual addressing in TTBR1. Consequently, PTRS_PER_PGD reflects the
larger page table size for userspace and the pgd pointer for kernel page
tables is offset before being written to TTBR1.
This means that we can't use PTRS_PER_PGD to iterate over kernel page
tables unless we apply the same offset, which is fiddly to get right and
leads to some non-idiomatic walking code. Instead, just follow the usual
pattern when walking page tables by using a while loop driven by
pXd_offset() and pXd_addr_end().
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Qian Cai <cai@lca.pw>
Acked-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
During resume hibernate restores all physical memory. Any memory
that is accessed with the MMU disabled needs to be cleaned to the
PoC.
KVMs __hyp_text was previously ommitted as it runs with the MMU
enabled, but now that the hyp-stub is located in this section,
we must clean __hyp_text too.
This ensures secondary CPUs that come online after hibernate
has finished resuming, and load KVM via the freshly written
hyp-stub see the correct instructions.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The hyp-stub is loaded by the kernel's early startup code at EL2
during boot, before KVM takes ownership later. The hyp-stub's
text is part of the regular kernel text, meaning it can be kprobed.
A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid.
Add it to the __hyp_text.
Signed-off-by: James Morse <james.morse@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
On systems with VHE the kernel and KVM's world-switch code run at the
same exception level. Code that is only used on a VHE system does not
need to be annotated as __hyp_text as it can reside anywhere in the
kernel text.
__hyp_text was also used to prevent kprobes from patching breakpoint
instructions into this region, as this code runs at a different
exception level. While this is no longer true with VHE, KVM still
switches VBAR_EL1, meaning a kprobe's breakpoint executed in the
world-switch code will cause a hyp-panic.
Move the __hyp_text check in the kprobes blacklist so it applies on
VHE systems too, to cover the common code and guest enter/exit
assembly.
Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able")
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are
clean to the PoC") added cache maintenance to ensure that global
variables set by the kaslr init routine are not wiped clean due to
cache invalidation occurring during the second round of page table
creation.
However, if kaslr_early_init() exits early with no randomization
being applied (either due to the lack of a seed, or because the user
has disabled kaslr explicitly), no cache maintenance is performed,
leading to the same issue we attempted to fix earlier, as far as the
module_alloc_base variable is concerned.
Note that module_alloc_base cannot be initialized statically, because
that would cause it to be subject to a R_AARCH64_RELATIVE relocation,
causing it to be overwritten by the second round of KASLR relocation
processing.
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache
for kernel mappings") was aimed at fixing the I-cache invalidation for
kernel mappings. However, it inadvertently caused all cache maintenance
for user mappings via set_pte_at() -> __sync_icache_dcache() ->
sync_icache_aliases() to call kick_all_cpus_sync().
Reported-by: Shijith Thotton <sthotton@marvell.com>
Tested-by: Shijith Thotton <sthotton@marvell.com>
Reported-by: Wandun Chen <chenwandun@huawei.com>
Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Cc: <stable@vger.kernel.org> # 4.19.x-
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The boot from eMMC is currently broken on the NXP i.MX8MQ EVK board.
When trying to boot from eMMC it fails with:
...
[ 1.271938] mmc1: Tuning failed, falling back to fixed sampling clock
[ 1.287429] print_req_error: I/O error, dev mmcblk1, sector 1 flags 0
[ 1.306833] mmc1: Tuning failed, falling back to fixed sampling clock
[ 1.322325] print_req_error: I/O error, dev mmcblk1, sector 2 flags 0
[ 1.329559] Buffer I/O error on dev mmcblk1, logical block 0, async page read
[ 1.336714] mmcblk1: unable to read partition table
...
The problem is the result of a partial misconfiguration of the pins and
the missing assigned clock rate.
Fixes: 9079aca4aacd ("arm64: add support for i.MX8M EVK board")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Tested-by: Chris Spencer <christopher.spencer@sea.co.uk>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Allwinner Fixes for 5.0
A couple of device tree fixes for the 5.0 cycle:
- Add missing clock-output-names for the osc24M clock on sun6i/A31
The Linux clock driver uses the device node as the clock name if
the property is missing. The node name was changed in 5.0-rc1,
breaking a subtle dependency in the sunxi-ng clock driver, and
renders Linux unable to completely boot up.
- Add alias for Ethernet controller on Beelink X2
This allows the bootloader to assign a deterministically generated
MAC address to it.
- Add property to enable USB VBUS regulator on OrangePi Win
The board had defined the constraints for the regulator, but was
missing the property to actually enable it.
* tag 'sunxi-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Fix USB OTG regulator
ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2
ARM: dts: sun6i: Add clock-output-names to osc24M clock
arm64: dts: allwinner: a64: Fix the video engine compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Amlogic fixes for v5.0-rc, round 2
- several fixups for the GPIO cd-inverted change
- IRQ trigger fixes for MAC IRQ
* tag 'amlogic-fixes-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: Fix mmc cd-gpios polarity
ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low
ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low
ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low
arm: dts: meson: Fix IRQ trigger type for macirq
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Qualcomm ARM64 Fixes for 5.0-rc3
* Fix irq controller compatible for the MSM8996 platforms
* tag 'qcom-fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: add msm8996 compatible to gicv3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Second Round of Renesas ARM Based SoC Fixes for v5.0
Enable DMA for SCIF2 on R-Car M3-W (r8a7796) and M3-n (r8a77965), and
(RZ/G2M) r8a774a1 SoCs.
This is was omitted from patches enabling DMA for other SCIF devices on the
same SoCs due to missing documentation. However, it is regarded as a fix
as arguably those patches claim to add this feature.
Per-SoC patches are provided to ease backporting of this fix as the kernel
version to be fixed is different for each SoC.
* tag 'renesas-fixes2-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77965: Enable DMA for SCIF2
arm64: dts: renesas: r8a7796: Enable DMA for SCIF2
arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After commit ef05bcb60c1a, boot from USB drives is broken.
Fix this problem by enabling usb-host regulators during boot time.
Fixes: ef05bcb60c1a ("arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Voytik <voytikd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Ports are described by child 'port' nodes contained in the device node.
'ports' is optional and is used to group all 'port' nodes which is not
the case here.
This patch fixes the following warnings:
arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port'
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port'
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port'
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
We currently hide the LORegion feature, and generate an UNDEF
if the guest dares using the corresponding registers. This is
a bit extreme, as ARMv8.1 guarantees the feature to be present.
The guest should check the feature register before doing anything,
but we could also give the guest some slack (read "allow the
guest to be a bit stupid").
So instead of unconditionnaly deliver an exception, let's
only do it when the host doesn't support LORegion at all (or
when the feature has been sanitized out), and treat the registers
as RAZ/WI otherwise (with the exception of LORID_EL1 being RO).
Fixes: cc33c4e20185 ("arm64/kvm: Prohibit guest LOR accesses")
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
|
|
Add compatible to gicv3 node to enable quirk required to restrict writing
to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor.
With this quirk MSM8996 can at least boot out of mainline, which can help
community to work with boards based on MSM8996.
Without this patch Qualcomm DB820c board reboots on mainline.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA
DMA mapping operations stored in the struct device arch data.
Switching arm64 to use the direct calls for the merged DMA direct /
swiotlb code broke this scheme. Replace the indirect calls with
direct-calls in xen-swiotlb as well to fix this problem.
Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2.
Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2.
Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2.
Fixes: 3a3933a4fa36430a ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Defining ARCH_SLAB_MINALIGN in arch/arm64/include/asm/cache.h when KASAN
is off is not needed, as it is defined in defined in include/linux/slab.h
as ifndef.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
kaslr_early_init() is called with the kernel mapped at its
link time offset, and if it returns with a non-zero offset,
the kernel is unmapped and remapped again at the randomized
offset.
During its execution, kaslr_early_init() also randomizes the
base of the module region and of the linear mapping of DRAM,
and sets two variables accordingly. However, since these
variables are assigned with the caches on, they may get lost
during the cache maintenance that occurs when unmapping and
remapping the kernel, so ensure that these values are cleaned
to the PoC.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Since commit b89d82ef01b3 ("arm64: kpti: Avoid rewriting early page
tables when KASLR is enabled"), a kernel built with CONFIG_RANDOMIZE_BASE
can decide early whether to use non-global mappings by checking the
kaslr_offset().
A kernel built without CONFIG_RANDOMIZE_BASE, instead checks the
cpufeature static-key.
This leaves a gap where CONFIG_RANDOMIZE_BASE was enabled, no
kaslr seed was provided, but kpti was forced on using the cmdline
option.
When the decision is made late, kpti_install_ng_mappings() will re-write
the page tables, but arm64_kernel_use_ng_mappings()'s value does not
change as it only tests the cpufeature static-key if
CONFIG_RANDOMIZE_BASE is disabled.
This function influences PROT_DEFAULT via PTE_MAYBE_NG, and causes
pgattr_change_is_safe() to catch nG->G transitions when the unchanged
PROT_DEFAULT is used as part of PAGE_KERNEL_RO:
[ 1.942255] alternatives: patching kernel code
[ 1.998288] ------------[ cut here ]------------
[ 2.000693] kernel BUG at arch/arm64/mm/mmu.c:165!
[ 2.019215] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 2.020257] Modules linked in:
[ 2.020807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2 #51
[ 2.021917] Hardware name: linux,dummy-virt (DT)
[ 2.022790] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 2.023742] pc : __create_pgd_mapping+0x508/0x6d0
[ 2.024671] lr : __create_pgd_mapping+0x500/0x6d0
[ 2.058059] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
[ 2.059369] Call trace:
[ 2.059845] __create_pgd_mapping+0x508/0x6d0
[ 2.060684] update_mapping_prot+0x48/0xd0
[ 2.061477] mark_linear_text_alias_ro+0xdc/0xe4
[ 2.070502] smp_cpus_done+0x90/0x98
[ 2.071216] smp_init+0x100/0x114
[ 2.071878] kernel_init_freeable+0xd4/0x220
[ 2.072750] kernel_init+0x10/0x100
[ 2.073455] ret_from_fork+0x10/0x18
[ 2.075414] ---[ end trace 3572f3a7782292de ]---
[ 2.076389] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
If arm64_kernel_unmapped_at_el0() is true, arm64_kernel_use_ng_mappings()
should also be true.
Signed-off-by: James Morse <james.morse@arm.com>
CC: Ard Biesheuvel <ard.biesheuvel@linaro.org>
CC: John Garry <john.garry@huawei.com>
CC: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
changed the behavior of "cd-inverted" to follow the device tree bindings
specification:
According to SDHCI standard, CD lines are specified as "active low".
Using the "cd-inverted" property means that the CD line is "active high".
Fix the SD card description for meson by setting the cd-gpios as
"active low", according to the boards specifications, and dropping the
"cd-inverted" property.
Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
Linus Torvalds
Arnd Bergmann
Eric Biggers
Marc Gonzalez
Andrey Konovalov
Vladimir Murzin
Baruch Siach
Nathan Chancellor
Mark Rutland
Ard Biesheuvel
Paolo Bonzini
James Morse
Marc Zyngier
Christoffer Dall
Jean-Philippe Brucker
Will Deacon
Catalin Marinas
Carlo Caione
Dmitry Voytik
Enric Balletbo i Serra
Srinivas Kandagatla
Christoph Hellwig
Geert Uytterhoeven
Loys Ollivier