| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently the PTE special supports is turned on in per architecture
header files. Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.
This patch introduce a new configuration variable to manage this
directly in the Kconfig files. It would later replace
__HAVE_ARCH_PTE_SPECIAL.
Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:
arm
__HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.
powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
- arch/powerpc/include/asm/book3s/64/pgtable.h
- arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.
sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64
There is no functional change introduced by this patch.
Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Add Maglev hashing scheduler to IPVS, from Inju Song.
2) Lots of new TC subsystem tests from Roman Mashak.
3) Add TCP zero copy receive and fix delayed acks and autotuning with
SO_RCVLOWAT, from Eric Dumazet.
4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
Brouer.
5) Add ttl inherit support to vxlan, from Hangbin Liu.
6) Properly separate ipv6 routes into their logically independant
components. fib6_info for the routing table, and fib6_nh for sets of
nexthops, which thus can be shared. From David Ahern.
7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
messages from XDP programs. From Nikita V. Shirokov.
8) Lots of long overdue cleanups to the r8169 driver, from Heiner
Kallweit.
9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.
10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.
11) Plumb extack down into fib_rules, from Roopa Prabhu.
12) Add Flower classifier offload support to igb, from Vinicius Costa
Gomes.
13) Add UDP GSO support, from Willem de Bruijn.
14) Add documentation for eBPF helpers, from Quentin Monnet.
15) Add TLS tx offload to mlx5, from Ilya Lesokhin.
16) Allow applications to be given the number of bytes available to read
on a socket via a control message returned from recvmsg(), from
Soheil Hassas Yeganeh.
17) Add x86_32 eBPF JIT compiler, from Wang YanQing.
18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
From Björn Töpel.
19) Remove indirect load support from all of the BPF JITs and handle
these operations in the verifier by translating them into native BPF
instead. From Daniel Borkmann.
20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.
21) Allow XDP programs to do lookups in the main kernel routing tables
for forwarding. From David Ahern.
22) Allow drivers to store hardware state into an ELF section of kernel
dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.
23) Various RACK and loss detection improvements in TCP, from Yuchung
Cheng.
24) Add TCP SACK compression, from Eric Dumazet.
25) Add User Mode Helper support and basic bpfilter infrastructure, from
Alexei Starovoitov.
26) Support ports and protocol values in RTM_GETROUTE, from Roopa
Prabhu.
27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
Brouer.
28) Add lots of forwarding selftests, from Petr Machata.
29) Add generic network device failover driver, from Sridhar Samudrala.
* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
strparser: Add __strp_unpause and use it in ktls.
rxrpc: Fix terminal retransmission connection ID to include the channel
net: hns3: Optimize PF CMDQ interrupt switching process
net: hns3: Fix for VF mailbox receiving unknown message
net: hns3: Fix for VF mailbox cannot receiving PF response
bnx2x: use the right constant
Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
enic: fix UDP rss bits
netdev-FAQ: clarify DaveM's position for stable backports
rtnetlink: validate attributes in do_setlink()
mlxsw: Add extack messages for port_{un, }split failures
netdevsim: Add extack error message for devlink reload
devlink: Add extack to reload and port_{un, }split operations
net: metrics: add proper netlink validation
ipmr: fix error path when ipmr_new_table fails
ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
net: hns3: remove unused hclgevf_cfg_func_mta_filter
netfilter: provide udp*_lib_lookup for nf_tproxy
qed*: Utilize FW 8.37.2.0
...
|
|
Pull EDAC updates from Borislav Petkov:
- Stratix10 SDRAM support to altera_edac (Thor Thayer)
- the usual misc fixes all over the place
[ Also, shared branch for socfpga_stratix10.dtsi file changes with the
socfpga tree ]
* tag 'edac_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, ghes: Make platform-based whitelisting x86-only
EDAC, altera: Fix ARM64 build warning
EDAC, skx: Fix skx_edac build error when ACPI_NFIT=m
EDAC, ghes: Use BIT() macro
EDAC, ghes: Add DDR4 and NVDIMM memory types
EDAC, altera: Handle SDRAM Uncorrectable Errors on Stratix10
Documentation: dt: edac: Move Altera SOCFPGA EDAC file
EDAC, altera: Add support for Stratix10 SDRAM EDAC
Documentation: dt: socfpga: Add Stratix10 ECC Manager binding
EDAC, ghes: Remove unused argument to ghes_edac_report_mem_error()
arm64: dts: stratix10: add sdram ecc
EDAC, i7core: Fix spelling mistake: "redundacy" -> "redundancy"
EDAC, ghes: Add a null pointer check in ghes_edac_unregister()
ghes, EDAC: Fix ghes_edac registration
arm64: dts: stratix10: Change pad skew values for EMAC0 PHY driver
ARM: dts: consistently use 'atmel' as at24 manufacturer in cyclone5
arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dts
arm64: dts: stratix10: enable i2c, add i2c periperals
arm64: dts: stratix10: use clock bindings for the Stratix10 platform
|
|
Pull Kbuild updates from Masahiro Yamada:
- improve fixdep to coalesce consecutive slashes in dep-files
- fix some issues of the maintainer string generation in deb-pkg script
- remove unused CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX and clean-up
several tools and linker scripts
- clean-up modpost
- allow to enable the dead code/data elimination for PowerPC in EXPERT
mode
- improve two coccinelle scripts for better performance
- pass endianness and machine size flags to sparse for all architecture
- misc fixes
* tag 'kbuild-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add machine size to CHECKFLAGS
kbuild: add endianness flag to CHEKCFLAGS
kbuild: $(CHECK) doesnt need NOSTDINC_FLAGS twice
scripts: Fixed printf format mismatch
scripts/tags.sh: use `find` for $ALLSOURCE_ARCHS generation
coccinelle: deref_null: improve performance
coccinelle: mini_lock: improve performance
powerpc: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selected
kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION to be selectable if enabled
kbuild: LD_DEAD_CODE_DATA_ELIMINATION no -ffunction-sections/-fdata-sections for module build
kbuild: Fix asm-generic/vmlinux.lds.h for LD_DEAD_CODE_DATA_ELIMINATION
modpost: constify *modname function argument where possible
modpost: remove redundant is_vmlinux() test
modpost: use strstarts() helper more widely
modpost: pass struct elf_info pointer to get_modinfo()
checkpatch: remove VMLINUX_SYMBOL() check
vmlinux.lds.h: remove no-op macro VMLINUX_SYMBOL()
kbuild: remove CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
export.h: remove code for prefixing symbols with underscore
depmod.sh: remove symbol prefix support
...
|
|
Pull crypto updates from Herbert Xu:
"API:
- Decryption test vectors are now automatically generated from
encryption test vectors.
Algorithms:
- Fix unaligned access issues in crc32/crc32c.
- Add zstd compression algorithm.
- Add AEGIS.
- Add MORUS.
Drivers:
- Add accelerated AEGIS/MORUS on x86.
- Add accelerated SM4 on arm64.
- Removed x86 assembly salsa implementation as it is slower than C.
- Add authenc(hmac(sha*), cbc(aes)) support in inside-secure.
- Add ctr(aes) support in crypto4xx.
- Add hardware key support in ccree.
- Add support for new Centaur CPU in via-rng"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits)
crypto: chtls - free beyond end rspq_skb_cache
crypto: chtls - kbuild warnings
crypto: chtls - dereference null variable
crypto: chtls - wait for memory sendmsg, sendpage
crypto: chtls - key len correction
crypto: salsa20 - Revert "crypto: salsa20 - export generic helpers"
crypto: x86/salsa20 - remove x86 salsa20 implementations
crypto: ccp - Add GET_ID SEV command
crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command
crypto: qat - Add MODULE_FIRMWARE for all qat drivers
crypto: ccree - silence debug prints
crypto: ccree - better clock handling
crypto: ccree - correct host regs offset
crypto: chelsio - Remove separate buffer used for DMA map B0 block in CCM
crypt: chelsio - Send IV as Immediate for cipher algo
crypto: chelsio - Return -ENOSPC for transient busy indication.
crypto: caam/qi - fix warning in init_cgr()
crypto: caam - fix rfc4543 descriptors
crypto: caam - fix MC firmware detection
crypto: clarify licensing of OpenSSL asm code
...
|
|
Pull time/Y2038 updates from Thomas Gleixner:
- Consolidate SySV IPC UAPI headers
- Convert SySV IPC to the new COMPAT_32BIT_TIME mechanism
- Cleanup the core interfaces and standardize on the ktime_get_* naming
convention.
- Convert the X86 platform ops to timespec64
- Remove the ugly temporary timespec64 hack
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86: Convert x86_platform_ops to timespec64
timekeeping: Add more coarse clocktai/boottime interfaces
timekeeping: Add ktime_get_coarse_with_offset
timekeeping: Standardize on ktime_get_*() naming
timekeeping: Clean up ktime_get_real_ts64
timekeeping: Remove timespec64 hack
y2038: ipc: Redirect ipc(SEMTIMEDOP, ...) to compat_ksys_semtimedop
y2038: ipc: Enable COMPAT_32BIT_TIME
y2038: ipc: Use __kernel_timespec
y2038: ipc: Report long times to user space
y2038: ipc: Use ktime_get_real_seconds consistently
y2038: xtensa: Extend sysvipc data structures
y2038: powerpc: Extend sysvipc data structures
y2038: sparc: Extend sysvipc data structures
y2038: parisc: Extend sysvipc data structures
y2038: mips: Extend sysvipc data structures
y2038: arm64: Extend sysvipc compat data structures
y2038: s390: Remove unneeded ipc uapi header files
y2038: ia64: Remove unneeded ipc uapi header files
y2038: alpha: Remove unneeded ipc uapi header files
...
|
|
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
|
|
Pull locking updates from Ingo Molnar:
- Lots of tidying up changes all across the map for Linux's formal
memory/locking-model tooling, by Alan Stern, Akira Yokosawa, Andrea
Parri, Paul E. McKenney and SeongJae Park.
Notable changes beyond an overall update in the tooling itself is the
tidying up of spin_is_locked() semantics, which spills over into the
kernel proper as well.
- qspinlock improvements: the locking algorithm now guarantees forward
progress whereas the previous implementation in mainline could starve
threads indefinitely in cmpxchg() loops. Also other related cleanups
to the qspinlock code (Will Deacon)
- misc smaller improvements, cleanups and fixes all across the locking
subsystem
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
locking/rwsem: Simplify the is-owner-spinnable checks
tools/memory-model: Add reference for 'Simplifying ARM concurrency'
tools/memory-model: Update ASPLOS information
MAINTAINERS, tools/memory-model: Update e-mail address for Andrea Parri
tools/memory-model: Fix coding style in 'lock.cat'
tools/memory-model: Remove out-of-date comments and code from lock.cat
tools/memory-model: Improve mixed-access checking in lock.cat
tools/memory-model: Improve comments in lock.cat
tools/memory-model: Remove duplicated code from lock.cat
tools/memory-model: Flag "cumulativity" and "propagation" tests
tools/memory-model: Add model support for spin_is_locked()
tools/memory-model: Add scripts to test memory model
tools/memory-model: Fix coding style in 'linux-kernel.def'
tools/memory-model: Model 'smp_store_mb()'
tools/memory-order: Update the cheat-sheet to show that smp_mb__after_atomic() orders later RMW operations
tools/memory-order: Improve key for SELF and SV
tools/memory-model: Fix cheat sheet typo
tools/memory-model: Update required version of herdtools7
tools/memory-model: Redefine rb in terms of rcu-fence
tools/memory-model: Rename link and rcu-path to rcu-link and rb
...
|
|
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
|
|
Pull dma-mapping updates from Christoph Hellwig:
- replace the force_dma flag with a dma_configure bus method. (Nipun
Gupta, although one patch is іncorrectly attributed to me due to a
git rebase bug)
- use GFP_DMA32 more agressively in dma-direct. (Takashi Iwai)
- remove PCI_DMA_BUS_IS_PHYS and rely on the dma-mapping API to do the
right thing for bounce buffering.
- move dma-debug initialization to common code, and apply a few
cleanups to the dma-debug code.
- cleanup the Kconfig mess around swiotlb selection
- swiotlb comment fixup (Yisheng Xie)
- a trivial swiotlb fix. (Dan Carpenter)
- support swiotlb on RISC-V. (based on a patch from Palmer Dabbelt)
- add a new generic dma-noncoherent dma_map_ops implementation and use
it for arc, c6x and nds32.
- improve scatterlist validity checking in dma-debug. (Robin Murphy)
- add a struct device quirk to limit the dma-mask to 32-bit due to
bridge/system issues, and switch x86 to use it instead of a local
hack for VIA bridges.
- handle devices without a dma_mask more gracefully in the dma-direct
code.
* tag 'dma-mapping-4.18' of git://git.infradead.org/users/hch/dma-mapping: (48 commits)
dma-direct: don't crash on device without dma_mask
nds32: use generic dma_noncoherent_ops
nds32: implement the unmap_sg DMA operation
nds32: consolidate DMA cache maintainance routines
x86/pci-dma: switch the VIA 32-bit DMA quirk to use the struct device flag
x86/pci-dma: remove the explicit nodac and allowdac option
x86/pci-dma: remove the experimental forcesac boot option
Documentation/x86: remove a stray reference to pci-nommu.c
core, dma-direct: add a flag 32-bit dma limits
dma-mapping: remove unused gfp_t parameter to arch_dma_alloc_attrs
dma-debug: check scatterlist segments
c6x: use generic dma_noncoherent_ops
arc: use generic dma_noncoherent_ops
arc: fix arc_dma_{map,unmap}_page
arc: fix arc_dma_sync_sg_for_{cpu,device}
arc: simplify arc_dma_sync_single_for_{cpu,device}
dma-mapping: provide a generic dma-noncoherent implementation
dma-mapping: simplify Kconfig dependencies
riscv: add swiotlb support
riscv: only enable ZONE_DMA32 for 64-bit
...
|
|
Filling in the padding slot in the bpf structure as a bug fix in 'ne'
overlapped with actually using that padding area for something in
'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, sparse assumes a 64bit machine when compiled on x86-64
and 32bit when compiled on anything else.
This can of course create all sort of problems for the other archs, like
issuing false warnings ('shift too big (32) for type unsigned long'), or
worse, failing to emit legitimate warnings.
Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT,
to CHECKFLAGS in the main Makefile (and so for all archs).
Also, remove the now unneeded -m32/-m64 in arch specific Makefiles.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Several source files have been taken from OpenSSL. In some of them a
comment that "permission to use under GPL terms is granted" was
included below a contradictory license statement. In several cases,
there was no indication that the license of the code was compatible
with the GPLv2.
This change clarifies the licensing for all of these files. I've
confirmed with the author (Andy Polyakov) that a) he has licensed the
files with the GPLv2 comment under that license and b) that he's also
happy to license the other files under GPLv2 too. In one case, the
file is already contained in his CRYPTOGAMS bundle, which has a GPLv2
option, and so no special measures are needed.
In all cases, the license status of code has been clarified by making
the GPLv2 license prominent.
The .S files have been regenerated from the updated .pl files.
This is a comment-only change. No code is changed.
Signed-off-by: Adam Langley <agl@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes for v4.17:
- a fix for a crash in scm_call_atomic on qcom platforms
- display fix for Allwinner A10
- a fix that re-enables ethernet on Allwinner H3 (C.H.I.P et al)
- a fix for eMMC corruption on hikey
- i2c-gpio descriptor tables for ixp4xx
... plus a small typo fix"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: Fix i2c-gpio GPIO descriptor tables
arm64: dts: hikey: Fix eMMC corruption regression
firmware: qcom: scm: Fix crash in qcom_scm_call_atomic1()
ARM: sun8i: v3s: fix spelling mistake: "disbaled" -> "disabled"
ARM: dts: sun4i: Fix incorrect clocks for displays
ARM: dts: sun8i: h3: Re-enable EMAC on Orange Pi One
|
|
ARM64: hisi fixes for 4.17
- Remove eMMC max-frequency property to fix eMMC corruption on hikey board
* tag 'hisi-fixes-for-4.17v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey: Fix eMMC corruption regression
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch is a partial revert of
commit abd7d0972a19 ("arm64: dts: hikey: Enable HS200 mode on eMMC")
which has been causing eMMC corruption on my HiKey board.
Symptoms usually looked like:
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
...
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc0: new HS200 MMC card at address 0001
...
dwmmc_k3 f723d000.dwmmc0: Unexpected command timeout, state 3
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
print_req_error: I/O error, dev mmcblk0, sector 8810504
Aborting journal on device mmcblk0p10-8.
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
mmc_host mmc0: Bus speed (slot 0) = 148800000Hz (slot req 150000000Hz, actual 148800000HZ div = 0)
EXT4-fs error (device mmcblk0p10): ext4_journal_check_start:61: Detected aborted journal
EXT4-fs (mmcblk0p10): Remounting filesystem read-only
And quite often this would result in a disk that wouldn't properly
boot even with older kernels.
It seems the max-frequency property added by the above patch is
causing the problem, so remove it.
Cc: Ryan Grachek <ryan@edited.us>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei04@gmail.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings")
disallowed block mappings for ioremap since that code does not honor
break-before-make. The same APIs are also used for permission updating
though and the extra checks prevent the permission updates from happening,
even though this should be permitted. This results in read-only permissions
not being fully applied. Visibly, this can occasionaly be seen as a failure
on the built in rodata test when the test data ends up in a section or
as an odd RW gap on the page table dump. Fix this by using
pgattr_change_is_safe instead of p*d_present for determining if the
change is permitted.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Fixes: 15122ee2c515 ("arm64: Enforce BBM for huge IO/VMAP mappings")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If userspace faults on a kernel address, handing them the raw ESR
value on the sigframe as part of the delivered signal can leak data
useful to attackers who are using information about the underlying hardware
fault type (e.g. translation vs permission) as a mechanism to defeat KASLR.
However there are also legitimate uses for the information provided
in the ESR -- notably the GCC and LLVM sanitizers use this to report
whether wild pointer accesses by the application are reads or writes
(since a wild write is a more serious bug than a wild read), so we
don't want to drop the ESR information entirely.
For faulting addresses in the kernel, sanitize the ESR. We choose
to present userspace with the illusion that there is nothing mapped
in the kernel's part of the address space at all, by reporting all
faults as level 0 translation faults taken to EL1.
These fields are safe to pass through to userspace as they depend
only on the instruction that userspace used to provoke the fault:
EC IL (always)
ISV CM WNR (for all data aborts)
All the other fields in ESR except DFSC are architecturally RES0
for an L0 translation fault taken to EL1, so can be zeroed out
without confusing userspace.
The illusion is not entirely perfect, as there is a tiny wrinkle
where we will report an alignment fault that was not due to the memory
type (for instance a LDREX to an unaligned address) as a translation
fault, whereas if you do this on real unmapped memory the alignment
fault takes precedence. This is not likely to trip anybody up in
practice, as the only users we know of for the ESR information who
care about the behaviour for kernel addresses only really want to
know about the WnR bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise modules that use these arithmetic operations will fail to
link. We accomplish this with the usual EXPORT_SYMBOL, which on most
architectures goes in the .S file but the ARM64 maintainers prefer that
insead it goes into arm64ksyms.
While we're at it, we also fix this up to use SPDX, and I personally
choose to relicense this as GPL2||BSD so that these symbols don't need
to be export_symbol_gpl, so all modules can use the routines, since
these are important general purpose compiler-generated function calls.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: PaX Team <pageexec@freemail.hu>
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
For LSE atomics that read and write a register operand, we need to
ensure that these operands are annotated as "early clobber" if the
register is written before all of the input operands have been consumed.
Failure to do so can result in the compiler allocating the same register
to both operands, leading to splats such as:
Unable to handle kernel paging request at virtual address 11111122222221
[...]
x1 : 1111111122222222 x0 : 1111111122222221
Process swapper/0 (pid: 1, stack limit = 0x000000008209f908)
Call trace:
test_atomic64+0x1360/0x155c
where x0 has been allocated as both the value to be stored and also the
atomic_t pointer.
This patch adds the missing clobbers.
Cc: <stable@vger.kernel.org>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Reported-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A handful of fixes. I've been queuing them up a bit too long so the
list is longer than it otherwise would have been spread out across a
few -rcs.
In general, it's a scattering of fixes across several platforms,
nothing truly serious enough to point out.
There's a slightly larger batch of them for the Davinci platforms due
to work to bring them back to life after some time, so there's a
handful of regressions, some of them going back very far, others more
recent.
There's also a few patches fixing DT on Renesas platforms since they
changed some bindings without remaining backwards compatible,
splitting up describing LVDS as a proper bridge instead of having it
as part of the display unit.
We could push for them to be backwards compatible with old device
trees, but it's likely to regress eventually if nobody's actually
using said compatibility"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
ARM: keystone: fix platform_domain_notifier array overrun
arm64: dts: exynos: Fix interrupt type for I2S1 device on Exynos5433
ARM: dts: imx51-zii-rdu1: fix touchscreen bindings
firmware: arm_scmi: Use after free in scmi_create_protocol_device()
ARM: dts: cygnus: fix irq type for arm global timer
Revert "ARM: dts: logicpd-som-lv: Fix pinmux controller references"
tee: check shm references are consistent in offset/size
tee: shm: fix use-after-free via temporarily dropped reference
ARM: dts: imx7s: Pass the 'fsl,sec-era' property
ARM: dts: tegra20: Revert "Fix ULPI regression on Tegra20"
ARM: dts: correct missing "compatible" entry for ti81xx SoCs
ARM: OMAP1: ams-delta: fix deferred_fiq handler
arm64: tegra: Make BCM89610 PHY interrupt as active low
ARM: davinci: fix GPIO lookup for I2C
ARM: dts: logicpd-som-lv: Fix pinmux controller references
ARM: dts: logicpd-som-lv: Fix Audio Mute
ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues
...
|
|
arm64: tegra: Device tree fixes for v4.17
This contains a one-line update to the device tree of the Tegra186 P3310
processor module, fixing the polarity of the PHY interrupt. Originally,
this was queued to go into v4.18, but the PHY ID matching patch has now
found its way into v4.17-rc5, which means that the PHY driver will know
how to identify the PHY on this board and try to use the interrupt. This
will unfortunately cause networking to break on P3310, hence why I think
this should go into v4.17.
* tag 'tegra-for-4.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Make BCM89610 PHY interrupt as active low
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Merge upstream to pick up changes on which pending patches depend on.
|
|
Add a new serial node for the Qualcomm BT controller QCA6174. This
allows automatic probing and hci registration through the serdev
framework instead of relying on the userspace helpers.
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch enables regulators and gpios for the Qualcomm QCA6174 BT/WLAN
combo controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Provide a wrapper which does that and use that everywhere.
Note that ending the SRCU critical section before returning from the
kvm_read_guest() wrapper is safe, because the data has been *copied*, so
we don't need to rely on valid references to the memslot anymore.
Cc: Stable <stable@vger.kernel.org> # 4.8+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following commit:
38b850a73034f ("arm64: spinlock: order spin_{is_locked,unlock_wait} against local locks")
... added an smp_mb() to arch_spin_is_locked(), in order
"to ensure that the lock value is always loaded after any other locks have
been taken by the current CPU", and reported one example (the "insane case"
in ipc/sem.c) relying on such guarantee.
It is however understood that spin_is_locked() is not required to provide
such an ordering guarantee (a guarantee that is currently not provided by
all the implementations/archs), and that callers relying on such ordering
should instead insert suitable memory barriers before acting on the result
of spin_is_locked().
Following a recent auditing [1] of the callers of {,raw_}spin_is_locked(),
revealing that none of them are relying on the ordering guarantee anymore,
this commit removes the leading smp_mb() from the primitive thus reverting
38b850a73034f.
[1] https://marc.info/?l=linux-kernel&m=151981440005264&w=2
https://marc.info/?l=linux-kernel&m=152042843808540&w=2
https://marc.info/?l=linux-kernel&m=152043346110262&w=2
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Link: http://lkml.kernel.org/r/1526338889-7003-2-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We can trivially save 4 bytes in prologue for cBPF since tail calls
can never be used from there. The register push/pop is pairwise,
here, x25 (fp) and x26 (tcc), so no point in changing that, only
reset to zero is not needed.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Improve the JIT to emit 64 and 32 bit immediates, the current
algorithm is not optimal and we often emit more instructions
than actually needed. arm64 has movz, movn, movk variants but
for the current 64 bit immediates we only use movz with a
series of movk when needed.
For example loading ffffffffffffabab emits the following 4
instructions in the JIT today:
* movz: abab, shift: 0, result: 000000000000abab
* movk: ffff, shift: 16, result: 00000000ffffabab
* movk: ffff, shift: 32, result: 0000ffffffffabab
* movk: ffff, shift: 48, result: ffffffffffffabab
Whereas after the patch the same load only needs a single
instruction:
* movn: 5454, shift: 0, result: ffffffffffffabab
Another example where two extra instructions can be saved:
* movz: abab, shift: 0, result: 000000000000abab
* movk: 1f2f, shift: 16, result: 000000001f2fabab
* movk: ffff, shift: 32, result: 0000ffff1f2fabab
* movk: ffff, shift: 48, result: ffffffff1f2fabab
After the patch:
* movn: e0d0, shift: 16, result: ffffffff1f2fffff
* movk: abab, shift: 0, result: ffffffff1f2fabab
Another example with movz, before:
* movz: 0000, shift: 0, result: 0000000000000000
* movk: fea0, shift: 32, result: 0000fea000000000
After:
* movz: fea0, shift: 32, result: 0000fea000000000
Moreover, reuse emit_a64_mov_i() for 32 bit immediates that
are loaded via emit_a64_mov_i64() which is a similar optimization
as done in 6fe8b9c1f41d ("bpf, x64: save several bytes by using
mov over movabsq when possible"). On arm64, the latter allows to
use a single instruction with movn due to zero extension where
otherwise two would be needed. And last but not least add a
missing optimization in emit_a64_mov_i() where movn is used but
the subsequent movk not needed. With some of the Cilium programs
in use, this shrinks the needed instructions by about three
percent. Tested on Cavium ThunderX CN8890.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Follow-up to 816d9ef32a8b ("bpf, arm64: remove ld_abs/ld_ind") in
that the extra 4 byte JIT scratchpad is not needed anymore since it
was in ld_abs/ld_ind as stack buffer for bpf_load_pointer().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
mvebu fixes for 4.17 (part 1)
Declare missing clocks needed for network on Armada 8040 base boards
(such as the McBin)
* tag 'mvebu-fixes-4.17-1' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada-cp110: Add mg_core_clk for ethernet node
ARM64: dts: marvell: armada-cp110: Add clocks for the xmdio node
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
All interrupts from SoC internal modules are level triggered, so fix
incorrect trigger type for I2S1 device on Exynos5433 SoCs.
This fixes following kernel warning:
WARNING: CPU: 2 PID: 1 at drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0xb0/0xb8
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc7-next-20180329 #646
Hardware name: Samsung TM2 board (DT)
pstate: 20000005 (nzCv daif -PAN -UAO)
pc : gic_irq_domain_translate+0xb0/0xb8
lr : irq_create_fwspec_mapping+0x64/0x328
sp : ffff0000098b38d0
...
Call trace:
gic_irq_domain_translate+0xb0/0xb8
irq_create_of_mapping+0x78/0xa0
of_irq_get+0x6c/0xa0
of_irq_to_resource+0x38/0x108
of_irq_to_resource_table+0x50/0x78
of_device_alloc+0x118/0x1b8
of_platform_device_create_pdata+0x54/0xe0
of_platform_bus_create+0x118/0x340
of_platform_bus_create+0x17c/0x340
of_platform_populate+0x74/0xd8
of_platform_default_populate_init+0xb0/0xcc
do_one_initcall+0x50/0x158
kernel_init_freeable+0x184/0x22c
kernel_init+0x10/0x108
ret_from_fork+0x10/0x18
---[ end trace 6decb2b3078d73f0 ]---
Fixes: d8d579c316e8 ("ARM: dts: exynos: Add I2S1 device node to exynos5433")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
UniPhier ARM SoC fixes for v4.17
- Fix input delay parameter of eMMC PHY
- Weaken drive-strength of ethernet PHY pins of LD20 reference board
* tag 'uniphier-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: stabilize ethernet of LD20 reference board
arm64: dts: uniphier: fix input delay value for legacy mode of eMMC
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pick up dependent socfpga_stratix10.dtsi changes from Dinh's tree to
avoid merge conflicts with that same file in his tree.
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull arm64 fixes from Will Deacon:
"There's a small memblock accounting problem when freeing the initrd
and a Spectre-v2 mitigation for NVIDIA Denver CPUs which just requires
a match on the CPU ID register.
Summary:
- Mitigate Spectre-v2 for NVIDIA Denver CPUs
- Free memblocks corresponding to freed initrd area"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: capabilities: Add NVIDIA Denver CPU to bp_harden list
arm64: Add MIDR encoding for NVIDIA CPUs
arm64: To remove initrd reserved area entry from memblock
|
|
Avoid excessive scheduling delays under a preemptible kernel by
conditionally yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
conditionally yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid excessive scheduling delays under a preemptible kernel by
yielding the NEON after every block of input.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
Laurent Dufour
Linus Torvalds
David S. Miller
Luc Van Oostenryck
Adam Langley
Olof Johansson
John Stultz
Ingo Molnar
Laura Abbott
Peter Maydell
Jason A. Donenfeld
Will Deacon
Thomas Gleixner
Thierry Escande
Srinivas Kandagatla
Andre Przywara
Andrea Parri
Daniel Borkmann
Marek Szyprowski
Borislav Petkov
Ard Biesheuvel