aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21arm64: dts: meson: fix mmc pin biasJerome Brunet4-29/+76
Clk pin does not require bias, data strobe should be pulled low. The rest of the pin (data and cmd) are pulled up. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: libretech-cc: switch eMMC to 1.8vJerome Brunet1-4/+7
While some 3.3v eMMC 4.0 are available from libretech, Only the 1.8v 5.0 modules are recommended and supported for the aml-s905x-cc. the 1.8v is provided by LDOs on the eMMC card, from vcc 3.3v Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson: libretech-cc: set eMMC as removableJerome Brunet1-1/+0
The eMMC on this board is add-on module which is not mandatory. Removing 'non-removable' property should prevent some errors when booting a board w/o an eMMC module present. Fixes: 72fb2c852188 ("ARM64: dts: meson-gxl-s905x-libretech-cc: fixup board definition") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson-g12a-u200: enable IR decoderNeil Armstrong1-0/+6
Add support for the IR decoder input on the U200 Reference Design board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson-g12a-x96-max: enable IR decoderNeil Armstrong1-0/+6
Add support for the IR decoder input on the X96 Max board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson-g12a: Add IR nodesNeil Armstrong1-0/+14
Amlogic G12A SoCs uses the exact same IR decoder as previous families, add the IR node and the pintctrl setting. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: dts: meson-g12a: Add PWM nodesNeil Armstrong1-0/+179
This adds the EE and AO PWM nodes and the possible pinctrl settings. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-05-21arm64: tegra: Use TEGRA186_ prefix for GPIOsThierry Reding1-2/+2
In order to move away from misleadingly generic definitions of the GPIO macros, use the Tegra186-specific prefix. These are the last remaining occurrences. The generic definitions can be removed after this. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-05-21arm64: dts: imx8qxp: Add gpio aliasAnson Huang1-0/+8
Add i.MX8QXP GPIO alias for kernel GPIO driver usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21arm64: dts: imx8mq: Add gpio aliasAnson Huang1-0/+5
Add i.MX8MQ GPIO alias for kernel GPIO driver usage. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner11-0/+11
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21arm64: dts: imx8mq: Remove unnecessary blank linesAnson Huang1-2/+0
Unnecessary blank lines do NOT help readability, so remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21arm64: dts: imx8mq: Add cpu speed grading and all OPPsLeonard Crestez1-1/+25
Add nvmem-cells reference to cpu and fill the OPP table with all known OPPs. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-21arm64: dts: imx8mm: Add cpu speed grading and all OPPsLeonard Crestez1-1/+16
Add a nvmem cell on cpu node referencing speed grade and the 1.8 Ghz cpufreq opp. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: dts: Stingray: Add NIC i2c device nodeRayagonda Kokatanur1-0/+18
Add NIC i2c device node. Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-05-20arm64: dts: Add USB DT nodes for Stingray SoCSrinath Mannam2-0/+73
Add DT nodes for - Two xHCI host controllers - Two BDC Broadcom USB device controller - Five USB PHY controllers [xHCI0] [BDC0] [xHCI1] [BDC1] | | | | --------------- ----------------------- | | | | | [SS-PHY0] [HS-PHY0] [SS-PHY1] [HS-PHY2] [HS-PHY1] [SS-PHY0/HS-PHY0] and [SS-PHY1/HS-PHY1] are combo PHYs has one SS and one HS PHYs. [HS-PHY2] is a single HS PHY. xHCI use SS-PHY to detect SS devices and HS-PHY to detect HS/FS/LS devices. BDC use SS-PHY in SS mode and HS-PHY in HS mode. xHCI0 port1 is SS-PHY0, port2 is HS-PHY0. xHCI1 port1 is SS-PHY1, port2 is HS-PHY2 and port3 is HS-PHY1. Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-05-20arm64: dts: stingray: Add Stingray Thermal DT support.Pramod Kumar1-0/+89
Add DT nodes for thermal zones memory base address to read temperature. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-05-20arm64: dts: renesas: r8a7795: Add TPU supportCao Van Dong1-0/+11
Add tpu device node to dtsi for TPU support on r8a7795 SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a77965: Add TPU supportCao Van Dong1-0/+11
Add tpu device node to dtsi for TPU support on r8a77965 SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a7796: Add TPU supportCao Van Dong1-0/+11
Add tpu device node to dtsi for TPU support on r8a7796 SoC. Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: ulcb-kf: Add support for TI WL1837Spyridon Papageorgiou1-0/+49
This patch adds description of TI WL1837 and links interfaces to communicate with the IC, namely the SDIO interface to WLAN. Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: draak: Remove unnecessary index from vin4 portSimon Horman1-6/+1
The ports node of vin4 only has one sub-node and thus does not need #address-cells/#size-cells and the sub-node does not need an exit. This addresses the following warning: # make dtbs W=1 ... arch/arm64/boot/dts/renesas/r8a77995-draak.dts:492.8-503.4: Warning (graph_child_address): /soc/video@e6ef4000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Fixes: 6a0942c20f5c ("arm64: dts: renesas: draak: Describe CVBS input") Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-05-20arm64: dts: renesas: cat874: Add HDMI audioFabrizio Castro1-0/+56
The CAT874 board pushes sound via I2S over SSI0 into the TDA19988BET chip. This commit wires things up so that we can get sound out of the HDMI interface. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: cat874: Add HDMI video supportFabrizio Castro1-0/+82
The CAT874 board comes with a HDMI connector, managed by a TDA19988BET chip, connected to the RZ/G2E SoC via DPAD. This patch adds the necessary support to the board DT. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Connect Ethernet-AVB to IPMMU-DS0Biju Das1-0/+1
Add IPMMU-DS0 to the Ethernet-AVB device node. Based on work by Magnus Damm for the r8a7795. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Tie Audio-DMAC to IPMMU-MPBiju Das1-0/+16
Hook up r8a774a1 Audio-DMAC nodes to the IPMMU-MP. Based on work for the r8a7795 by Magnus Damm. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Tie SYS-DMAC to IPMMU-DS0/1Biju Das1-0/+24
Hook up r8a774a1 DMAC nodes to the IPMMUs. In particular SYS-DMAC0 gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1. Based on work for the r8a7796 by Magnus Damm. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Add FDP1 instanceBiju Das1-0/+10
The r8a774a1 has a single FDP1 instance similar to r8a7796. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Add DU device to DTBiju Das1-0/+63
Add the DU device to r8a774a1.dtsi in a disabled state. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: renesas: r8a774a1: Add VSP instancesBiju Das1-0/+55
The r8a774a1 soc has 5 VSP instances similar to r8a7796. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: defconfig: Enable TDA19988Fabrizio Castro1-0/+1
The EK874 board comes with a TDA19988 chip on board, therefore enable it in the defconfig. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-05-20arm64: dts: allwinner: a64: Enable audio on Teres-IHarald Geyer1-0/+42
The TERES-I has internal speakers (left, right), internal microphone and a headset combo jack (headphones + mic), "CTIA" (android) pinout. The headphone and mic detect lines of the A64 are connected properly, but AFAIK currently unsupported by the driver. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supplyChen-Yu Tsai1-0/+5
The Bananapi M64 has a micro-USB connector with USB OTG support (that is already enabled). VBUS from this connector is wired to the PMIC's VBUS input. Enable the PMIC's USB power supply on this board, and also hook it up to the USB PHY. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: axp803: add USB power supply nodeChen-Yu Tsai1-0/+6
The AXP803 has a VBUS power input. Add a device node for it, now that we support it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: Add pinmux for RGB666 LCDIcenowy Zheng1-0/+10
Allwinner A64's TCON0 can output RGB666 LCD signal. Add its pinmux. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodesJernej Skrabec1-0/+23
The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side identifies as BCM43430, while the Bluetooth side identifies as BCM43438. WiFi is connected to mmc1 and the Bluetooth side is connected to UART1 in a 4 wire configuration. Same as the WiFi side, due to being the same chip and package, DLDO2 provides overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC clock output provides the LPO low power clock at 32.768 kHz. This patch enables WiFi and Bluetooth on OrangePi Win boards and adds missing LPO clock on the WiFi side. PCM connection also exists for Bluetooth audio, but it's not used here. Bluetooth UART speed is set to 1.5 MBaud in order to be able transmit audio. While module supports even higher speeds, currently sunxi clock driver doesn't support higher speed. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64Icenowy Zheng1-0/+10
The Allwinner H6 SoC features tweakable VCC for PC, PD, PG, PL and PM banks. This patch adds supplies for these banks except PL bank. PL bank is where PMIC is attached, and currently if a PMIC regulator is added for it a dependency loop will happen. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTPJagan Teki1-0/+23
Goodix GT911 CTP is bound with Oceanic 5205 5inMFD board. The CTP connected to board with, - SDA, SCK from i2c0 - GPIO-LD0 as AVDD28 supply - PH4 gpio as interrupt pin - PH11 gpio as reset pin - X axis is inverted - Y axis is inverted Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP nodeJagan Teki1-0/+23
Add Goodix GT5663 capacitive touch controller node on Amarula A64-Relic board. The CTP connected to board with, - SDA, SCK from i2c1 - GPIO-LD0 as AVDD28 supply - PH4 gpio as interrupt pin - PH8 gpio as reset pin - X axis is inverted - Y axis is inverted Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: allwinner: a64: move I2C pinctrl to dtsiJagan Teki6-14/+4
There is only one pinmuxing available for each I2C controller. So, move pinctrl for i2c0, i2c1 from board dts files into SoC dtsi. By moving these pinctrls the i2c1 node from Nanopi A64 just have a status, which is disabled already so remove the entire node from it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: defconfig: add allwinner sid supportYangtao Li1-0/+1
Sid contains speedbin information and temperature sensor calibration information and more, which are important for SOC. This patch enables CONFIG_NVMEM_SUNXI_SID by default. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-20arm64: dts: imx8mm-evk: Add BD71847 PMICLeonard Crestez1-0/+131
The BUCK2 regulator is used for cpufreq voltage control, otherwise configuration is mostly static. This uses the newly-implemented rohm,reset-snvs-powered property to properly handle the SNVS state of imx8mm. Between BD71837 and BD71847 the BUCK3/4 regulators were removed but datasheet and board schematics kept the names for BUCK5/6/7/8. The driver however renumbered 5/6/7/8 to 3/4/5/6. Use the names from DT bindings and add comments to signal this. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: imx: Fix build error without CONFIG_SOC_BUSYueHaibing1-0/+1
During randconfig builds, I occasionally run into an invalid configuration drivers/soc/imx/soc-imx8.o: In function `imx8_soc_init': soc-imx8.c:(.init.text+0x144): undefined reference to `soc_device_register' while CONFIG_SOC_BUS is not set, the building failed like this. This patch selects SOC_BUS to fix it. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a7e26f356ca1 ("soc: imx: Add generic i.MX8 SoC driver") Suggested-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: dts: imx8mq: Add a node for irqsteerGuido Günther1-0/+19
Add a node for the irqsteer interrupt controller found on the iMX8MQ SoC. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: dts: ls1028a: Add properties for Mali DP500 nodeWen He1-0/+38
The LS1028A has a LCD controller and Displayport interface that connects to eDP and Displayport connectors on the LS1028A board. This patch enables the LCD controller driver on the LS1028A. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Wen He <wen.he_1@nxp.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: defconfig: Enable ROHM_BD718XX PMIC for imx8mm-evkLeonard Crestez1-0/+2
Enable mfd and regulator driver for PMIC found on imx8mm-evk boards Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: defconfig: Enable lpi2c for imx8qxp and sensorsLeonard Crestez1-0/+4
The current lpi2c driver can work on imx8 chips so lets enable it. Also enable few i2c peripherals found on imx8qxp-mek I2C (some were already used for other boards). Sensors enabled as modules because not required for boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: defconfig: Enable imx8mm clk/pinctrlLeonard Crestez1-0/+2
Basic imx8mm support is already available in linux-next just not enabled in arm64 defconfig. With this patch imx8mm-evk can boot. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: defconfig: Enable RTC_DRV_SNVSAbel Vesa1-0/+1
i.MX8MQ needs it for RTC support. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-05-20arm64: defconfig: add support for i.MX system controller watchdogAnson Huang1-0/+1
Enable CONFIG_IMX_SC_WDT as module to support i.MX system controller watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.