| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add i.MX8QXP system controller watchdog support.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make issuing a TLB invalidate for page-table pages the normal case.
The reason is twofold:
- too many invalidates is safer than too few,
- most architectures use the linux page-tables natively
and would thus require this.
Make it an opt-out, instead of an opt-in.
No change in behavior intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Provide a generic tlb_flush() implementation that relies on
flush_tlb_range(). This is a little awkward because flush_tlb_range()
assumes a VMA for range invalidation, but we no longer have one.
Audit of all flush_tlb_range() implementations shows only vma->vm_mm
and vma->vm_flags are used, and of the latter only VM_EXEC (I-TLB
invalidates) and VM_HUGETLB (large TLB invalidate) are used.
Therefore, track VM_EXEC and VM_HUGETLB in two more bits, and create a
'fake' VMA.
This allows architectures that have a reasonably efficient
flush_tlb_range() to not require any additional effort.
No change in behavior intended.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the new compatible string defined for the Stratix10
System Manager. Remove syscon since it is not correct
on this platform.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Enable the Stratix10 System Manager by default.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The Amlogic Meson GXM SoC embeds an ARM Mali T820 GPU.
This patch adds the node with all the needed properties to power
on the GPU.
This has been tested with the work-in-progress PanFrost project
aiming support for ARM Mali Midgard and later GPUs.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The introduction of the SVE registers to userspace started with a
refactoring of the way we expose any register via the ONE_REG
interface.
Unfortunately, this change doesn't exactly behave as expected
if the number of registers is non-zero and consider everything
to be an error. The visible result is that QEMU barfs very early
when creating vcpus.
Make sure we only exit early in case there is an actual error, rather
than a positive number of registers...
Fixes: be25bbb392fa ("KVM: arm64: Factor out core register ID enumeration")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Although we don't actually make use of the 'max_mapnr' global variable,
we do set it to a junk value for !CONFIG_FLATMEM configurations that
leave mem_map uninitialised.
To avoid somebody tripping over this in future, set 'max_mapnr' using
max_pfn, which is calculated directly from the memblock information.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
|
|
Pull arm64 fix from Catalin Marinas:
"Use memblock_alloc() instead of memblock_alloc_low() in
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace memblock_alloc_low with memblock_alloc
|
|
In order to handle Video Output and later on Video decoding,
add a reserved CMA pool with a similar 256MiB size as other SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Enable the Bluetooth Module on the X96 Max Set-Top-Box.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add system regulators for the X96 Max Set-Top-Box.
Still missing
* VDD_EE (0.8V - PWM controlled)
* VDD_CPU (PWM controlled)
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The Stratix10 devkit's QSPI can support up to 100MHz.
Cc: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
To provide a uniform way to check for KVM SVE support amongst other
features, this patch adds a suitable capability KVM_CAP_ARM_SVE,
and reports it as present when SVE is available.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Now that all the pieces are in place, this patch offers a new flag
KVM_ARM_VCPU_SVE that userspace can pass to KVM_ARM_VCPU_INIT to
turn on SVE for the guest, on a per-vcpu basis.
As part of this, support for initialisation and reset of the SVE
vector length set and registers is added in the appropriate places,
as well as finally setting the KVM_ARM64_GUEST_HAS_SVE vcpu flag,
to turn on the SVE support code.
Allocation of the SVE register storage in vcpu->arch.sve_state is
deferred until the SVE configuration is finalized, by which time
the size of the registers is known.
Setting the vector lengths supported by the vcpu is considered
configuration of the emulated hardware rather than runtime
configuration, so no support is offered for changing the vector
lengths available to an existing vcpu across reset.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch adds a new pseudo-register KVM_REG_ARM64_SVE_VLS to
allow userspace to set and query the set of vector lengths visible
to the guest.
In the future, multiple register slices per SVE register may be
visible through the ioctl interface. Once the set of slices has
been determined we would not be able to allow the vector length set
to be changed any more, in order to avoid userspace seeing
inconsistent sets of registers. For this reason, this patch adds
support for explicit finalization of the SVE configuration via the
KVM_ARM_VCPU_FINALIZE ioctl.
Finalization is the proper place to allocate the SVE register state
storage in vcpu->arch.sve_state, so this patch adds that as
appropriate. The data is freed via kvm_arch_vcpu_uninit(), which
was previously a no-op on arm64.
To simplify the logic for determining what vector lengths can be
supported, some code is added to KVM init to work this out, in the
kvm_arm_init_arch_resources() hook.
The KVM_REG_ARM64_SVE_VLS pseudo-register is not exposed yet.
Subsequent patches will allow SVE to be turned on for guest vcpus,
making it visible.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Some aspects of vcpu configuration may be too complex to be
completed inside KVM_ARM_VCPU_INIT. Thus, there may be a
requirement for userspace to do some additional configuration
before various other ioctls will work in a consistent way.
In particular this will be the case for SVE, where userspace will
need to negotiate the set of vector lengths to be made available to
the guest before the vcpu becomes fully usable.
In order to provide an explicit way for userspace to confirm that
it has finished setting up a particular vcpu feature, this patch
adds a new ioctl KVM_ARM_VCPU_FINALIZE.
When userspace has opted into a feature that requires finalization,
typically by means of a feature flag passed to KVM_ARM_VCPU_INIT, a
matching call to KVM_ARM_VCPU_FINALIZE is now required before
KVM_RUN or KVM_GET_REG_LIST is allowed. Individual features may
impose additional restrictions where appropriate.
No existing vcpu features are affected by this, so current
userspace implementations will continue to work exactly as before,
with no need to issue KVM_ARM_VCPU_FINALIZE.
As implemented in this patch, KVM_ARM_VCPU_FINALIZE is currently a
placeholder: no finalizable features exist yet, so ioctl is not
required and will always yield EINVAL. Subsequent patches will add
the finalization logic to make use of this ioctl for SVE.
No functional change for existing userspace.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch adds a kvm_arm_init_arch_resources() hook to perform
subarch-specific initialisation when starting up KVM.
This will be used in a subsequent patch for global SVE-related
setup on arm64.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
KVM will need to interrogate the set of SVE vector lengths
available on the system.
This patch exposes the relevant bits to the kernel, along with a
sve_vq_available() helper to check whether a particular vector
length is supported.
__vq_to_bit() and __bit_to_vq() are not intended for use outside
these functions: now that these are exposed outside fpsimd.c, they
are prefixed with __ in order to provide an extra hint that they
are not intended for general-purpose use.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch includes the SVE register IDs in the list returned by
KVM_GET_REG_LIST, as appropriate.
On a non-SVE-enabled vcpu, no new IDs are added.
On an SVE-enabled vcpu, IDs for the FPSIMD V-registers are removed
from the list, since userspace is required to access the Z-
registers instead in order to access the V-register content. For
the variably-sized SVE registers, the appropriate set of slice IDs
are enumerated, depending on the maximum vector length for the
vcpu.
As it currently stands, the SVE architecture never requires more
than one slice to exist per register, so this patch adds no
explicit support for enumerating multiple slices. The code can be
extended straightforwardly to support this in the future, if
needed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch adds the following registers for access via the
KVM_{GET,SET}_ONE_REG interface:
* KVM_REG_ARM64_SVE_ZREG(n, i) (n = 0..31) (in 2048-bit slices)
* KVM_REG_ARM64_SVE_PREG(n, i) (n = 0..15) (in 256-bit slices)
* KVM_REG_ARM64_SVE_FFR(i) (in 256-bit slices)
In order to adapt gracefully to future architectural extensions,
the registers are logically divided up into slices as noted above:
the i parameter denotes the slice index.
This allows us to reserve space in the ABI for future expansion of
these registers. However, as of today the architecture does not
permit registers to be larger than a single slice, so no code is
needed in the kernel to expose additional slices, for now. The
code can be extended later as needed to expose them up to a maximum
of 32 slices (as carved out in the architecture itself) if they
really exist someday.
The registers are only visible for vcpus that have SVE enabled.
They are not enumerated by KVM_GET_REG_LIST on vcpus that do not
have SVE.
Accesses to the FPSIMD registers via KVM_REG_ARM_CORE is not
allowed for SVE-enabled vcpus: SVE-aware userspace can use the
KVM_REG_ARM64_SVE_ZREG() interface instead to access the same
register state. This avoids some complex and pointless emulation
in the kernel to convert between the two views of these aliased
registers.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
In order to avoid the pointless complexity of maintaining two ioctl
register access views of the same data, this patch blocks ioctl
access to the FPSIMD V-registers on vcpus that support SVE.
This will make it more straightforward to add SVE register access
support.
Since SVE is an opt-in feature for userspace, this will not affect
existing users.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
In preparation for adding logic to filter out some KVM_REG_ARM_CORE
registers from the KVM_GET_REG_LIST output, this patch factors out
the core register enumeration into a separate function and rebuilds
num_core_regs() on top of it.
This may be a little more expensive (depending on how good a job
the compiler does of specialising the code), but KVM_GET_REG_LIST
is not a hot path.
This will make it easier to consolidate ID filtering code in one
place.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
arch/arm64/kvm/guest.c uses the string functions, but the
corresponding header is not included.
We seem to get away with this for now, but for completeness this
patch adds the #include, in preparation for adding yet more
memset() calls.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
In order to give each vcpu its own view of the SVE registers, this
patch adds context storage via a new sve_state pointer in struct
vcpu_arch. An additional member sve_max_vl is also added for each
vcpu, to determine the maximum vector length visible to the guest
and thus the value to be configured in ZCR_EL2.LEN while the vcpu
is active. This also determines the layout and size of the storage
in sve_state, which is read and written by the same backend
functions that are used for context-switching the SVE state for
host tasks.
On SVE-enabled vcpus, SVE access traps are now handled by switching
in the vcpu's SVE context and disabling the trap before returning
to the guest. On other vcpus, the trap is not handled and an exit
back to the host occurs, where the handle_sve() fallback path
reflects an undefined instruction exception back to the guest,
consistently with the behaviour of non-SVE-capable hardware (as was
done unconditionally prior to this patch).
No SVE handling is added on non-VHE-only paths, since VHE is an
architectural and Kconfig prerequisite of SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch adds the necessary support for context switching ZCR_EL1
for each vcpu.
ZCR_EL1 is trapped alongside the FPSIMD/SVE registers, so it makes
sense for it to be handled as part of the guest FPSIMD/SVE context
for context switch purposes instead of handling it as a general
system register. This means that it can be switched in lazily at
the appropriate time. No effort is made to track host context for
this register, since SVE requires VHE: thus the hosts's value for
this register lives permanently in ZCR_EL2 and does not alias the
guest's value at any time.
The Hyp switch and fpsimd context handling code is extended
appropriately.
Accessors are added in sys_regs.c to expose the SVE system
registers and ID register fields. Because these need to be
conditionally visible based on the guest configuration, they are
implemented separately for now rather than by use of the generic
system register helpers. This may be abstracted better later on
when/if there are more features requiring this model.
ID_AA64ZFR0_EL1 is RO-RAZ for MRS/MSR when SVE is disabled for the
guest, but for compatibility with non-SVE aware KVM implementations
the register should not be enumerated at all for KVM_GET_REG_LIST
in this case. For consistency we also reject ioctl access to the
register. This ensures that a non-SVE-enabled guest looks the same
to userspace, irrespective of whether the kernel KVM implementation
supports SVE.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Some optional features of the Arm architecture add new system
registers that are not present in the base architecture.
Where these features are optional for the guest, the visibility of
these registers may need to depend on some runtime configuration,
such as a flag passed to KVM_ARM_VCPU_INIT.
For example, ZCR_EL1 and ID_AA64ZFR0_EL1 need to be hidden if SVE
is not enabled for the guest, even though these registers may be
present in the hardware and visible to the host at EL2.
Adding special-case checks all over the place for individual
registers is going to get messy as the number of conditionally-
visible registers grows.
In order to help solve this problem, this patch adds a new sysreg
method visibility() that can be used to hook in any needed runtime
visibility checks. This method can currently return
REG_HIDDEN_USER to inhibit enumeration and ioctl access to the
register for userspace, and REG_HIDDEN_GUEST to inhibit runtime
access by the guest using MSR/MRS. Wrappers are added to allow
these flags to be conveniently queried.
This approach allows a conditionally modified view of individual
system registers such as the CPU ID registers, in addition to
completely hiding register where appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Architecture features that are conditionally visible to the guest
will require run-time checks in the ID register accessor functions.
In particular, read_id_reg() will need to perform checks in order
to generate the correct emulated value for certain ID register
fields such as ID_AA64PFR0_EL1.SVE for example.
This patch propagates vcpu into read_id_reg() so that future
patches can add run-time checks on the guest configuration here.
For now, there is no functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Since SVE will be enabled or disabled on a per-vcpu basis, a flag
is needed in order to track which vcpus have it enabled.
This patch adds a suitable flag and a helper for checking it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The current FPSIMD/SVE context handling support for non-task (i.e.,
KVM vcpu) contexts does not take SVE into account. This means that
only task contexts can safely use SVE at present.
In preparation for enabling KVM guests to use SVE, it is necessary
to keep track of SVE state for non-task contexts too.
This patch adds the necessary support, removing assumptions from
the context switch code about the location of the SVE context
storage.
When binding a vcpu context, its vector length is arbitrarily
specified as SVE_VL_MIN for now. In any case, because TIF_SVE is
presently cleared at vcpu context bind time, the specified vector
length will not be used for anything yet. In later patches TIF_SVE
will be set here as appropriate, and the appropriate maximum vector
length for the vcpu will be passed when binding.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Due to the way the effective SVE vector length is controlled and
trapped at different exception levels, certain mismatches in the
sets of vector lengths supported by different physical CPUs in the
system may prevent straightforward virtualisation of SVE at parity
with the host.
This patch analyses the extent to which SVE can be virtualised
safely without interfering with migration of vcpus between physical
CPUs, and rejects late secondary CPUs that would erode the
situation further.
It is left up to KVM to decide what to do with this information.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
The roles of sve_init_vq_map(), sve_update_vq_map() and
sve_verify_vq_map() are highly non-obvious to anyone who has not dug
through cpufeatures.c in detail.
Since the way these functions interact with each other is more
important here than a full understanding of the cpufeatures code, this
patch adds comments to make the functions' roles clearer.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
kvm_host.h uses some declarations from other headers that are
currently included by accident, without an explicit #include.
This patch adds a few #includes that are clearly missing. Although
the header builds without them today, this should help to avoid
future surprises.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
kvm_arm_num_regs() adds together various partial register counts in
a freeform sum expression, which makes it harder than necessary to
read diffs that add, modify or remove a single term in the sum
(which is expected to the common case under maintenance).
This patch refactors the code to add the term one per line, for
maximum readability.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
__fpsimd_enabled() no longer exists, but a dangling declaration has
survived in kvm_hyp.h.
This patch gets rid of it.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
This patch updates fpsimd_flush_task_state() to mirror the new
semantics of fpsimd_flush_cpu_state() introduced by commit
d8ad71fa38a9 ("arm64: fpsimd: Fix TIF_FOREIGN_FPSTATE after
invalidating cpu regs"). Both functions now implicitly set
TIF_FOREIGN_FPSTATE to indicate that the task's FPSIMD state is not
loaded into the cpu.
As a side-effect, fpsimd_flush_task_state() now sets
TIF_FOREIGN_FPSTATE even for non-running tasks. In the case of
non-running tasks this is not useful but also harmless, because the
flag is live only while the corresponding task is running. This
function is not called from fast paths, so special-casing this for
the task == current case is not really worth it.
Compiler barriers previously present in restore_sve_fpsimd_context()
are pulled into fpsimd_flush_task_state() so that it can be safely
called with preemption enabled if necessary.
Explicit calls to set TIF_FOREIGN_FPSTATE that accompany
fpsimd_flush_task_state() calls and are now redundant are removed
as appropriate.
fpsimd_flush_task_state() is used to get exclusive access to the
representation of the task's state via task_struct, for the purpose
of replacing the state. Thus, the call to this function should
happen before manipulating fpsimd_state or sve_state etc. in
task_struct. Anomalous cases are reordered appropriately in order
to make the code more consistent, although there should be no
functional difference since these cases are protected by
local_bh_disable() anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Tested-by: zhang.lei <zhang.lei@jp.fujitsu.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
thermal-zones node does not have any register properties and thus
shouldn't be placed inside the bus.
Move thermal-zones node from soc node to root node in order to fix
the following build warning with W=1:
arch/arm64/boot/dts/freescale/imx8mq.dtsi:305.18-364.6: Warning (simple_bus_reg): /soc@0/bus@30000000/thermal-zones: missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
KVM/ARM fixes for 5.1
- Fix THP handling in the presence of pre-existing PTEs
- Honor request for PTE mappings even when THPs are available
- GICv4 performance improvement
- Take the srcu lock when writing to guest-controlled ITS data structures
- Reset the virtual PMU in preemptible context
- Various cleanups
|
|
Enable FPGA framework, Intel Stratix10 SoC FPGA manager, Stratix10
service layer, and Altera Freeze Bridge drivers.
Intel Stratix10 service layer driver was added with commit 7ca5ce896524
("firmware: add Intel Stratix10 service layer driver").
Intel Stratix10 service layer provides kernel APIs for drivers to request
access to the secure features. Such features include FPGA programming,
remote status update, and read and write secure registers.
While clients of the service layer can be built as modules, the service
layer itself has to be configured as built-in. The service layer is
dependent on ARCH_STRATIX10.
Enabling Altera Freeze Bridge depends on commit 38cd7ad5bd25
("fpga: altera_freeze_bridge: remove restriction to socfpga").
Signed-off-by: Richard Gong <richard.gong@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Enable CONFIG_PCIE_ALTERA and CONFIG_PCIE_ALTERA_MSI.
Also do a make savedefconfig to clean up.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
In order to fix dependencies with rpmpd DT entries, the header was
dropped and hardcoded values were added for opp-level, during the
previous merge window.
Add the header back in now and remove the hardcodings, effectively
reverting commit '08585d21de9875a6064b350957faa0460a4c69a6: arm64: dts:
sdm845: Fixup dependency on RPMPD includes'
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Enable blsp1_uart3, define its pinconf and add the bluetooth node.
It seems provisioning is lacking a valid BD address, preventing the
interface from initializing, so provide a dummy for now.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Define the EVB pms405_s3 supplies.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The PMS405 sports 5 SMPS and 13 LDO regulators, add the regulators to
pms405 DTS.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bjorn: updated label]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Add host controller and PHY DT nodes.
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The UFS host controller driver needs to set the load on 3 power rails
(l20, l26, s4) but the operation fails silently unless we specify the
regulator-allow-set-load property in the corresponding DT nodes.
Tested-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
The property controlled-remotely should not be set by default
for qcs-404 device, it should be set based on the secure boot
options (TZ or ATF) preferred by the platform. Hence, the
controlled-remotely property is moved to platform specific
dts files.
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
PMS405 L3 is outside the acceptable range, causing PCIe to fail. Fix
these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Khasim Syed Mohammed <khasim.mohammed@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bjorn: Hunk fixing up S5 already applied, updated commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
EVB-4000 comes with ethernet so enable it and add pinctrl bindings.
Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
Anson Huang
Peter Zijlstra
Thor Thayer
Christian Hewitt
Marc Zyngier
Muchun Song
Linus Torvalds
Neil Armstrong
Guillaume La Roque
Dinh Nguyen
Dave Martin
Fabio Estevam
Paolo Bonzini
Rajendra Nayak
Bjorn Andersson
Jorge Ramirez-Ortiz
Marc Gonzalez
Khasim Syed Mohammed
Vinod Koul