aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2019-01-24arm64: dts: sdm845: Add gpu clock controller nodeDouglas Anderson1-0/+11
Add the GPU clock controller nodes as per the example. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: qcom: sdm845: Add qspi (quad SPI) nodeDouglas Anderson1-0/+47
This adds the Quad SPI controller to the main sdm845 device tree file. Boards will be expected to assign the proper pinctrl depending on how many chip selects they have hooked up and how many data lines. This depends on commit 48735597f7bd ("clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header") to add the needed defines. It also shouldn't land until the patch ("dt-bindings: spi: Qualcomm Quad SPI(QSPI) documentation") [1] lands. [1] https://lkml.kernel.org/r/20181002214709.162330-1-ryandcase@chromium.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: qcom: msm8998: Enumerate i2c controllersJeffrey Hugo1-0/+180
msm8998 has a dozen i2c controllers which can be used to connect to board specific peripherals. Enumerate the controllers so that boards can wire up as needed. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> [bjorn: Renumbered labels on BLSP2 nodes] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: qcom: msm8998-mtp: Increase load on l21 for sdcardJeffrey Hugo1-0/+2
l21 is used as sdcard vmmc, and needs the load increased to prevent voltage drop issues with some sdcards. This addresses -84 errors seen during sdcard init with SDR104 cards. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24Merge branch 'arm64-for-5.1' into arm64-for-5.1-2Andy Gross8-4/+561
2019-01-24arm64: dts: qcom: sdm845: Add dpu to sdm845 dts fileJeykumar Sankaran1-0/+203
DPU is short for the Display Processing Unit. It is the display controller on Qualcomm SDM845 chips. This change adds MDSS and DSI nodes to enable display on the target device. Changes in v2: - Beefed up commit message - Use SoC specific compatibles for mdss and dpu (Rob H) - Use assigned-clocks to set initial clock frequency(Rob H) Changes in v3: - added IOMMU node - Fix device naming (remove _phys) - Use correct IRQ_TYPE in interrupt specifiers Changes in v4: - move mdss node to preserve the unit address sort order - remove _clk suffix from dsi clocks (both the comments are from Doug Anderson) Changes in v5: - Keep the device status "disabled" by default (Bjorn Andersson) - Use MDSS_GDSC macro (Jordan) - Fix phy-names (Jordan) - List reg ranges in numerical order (Jordan) Changes in v6: - Separating this patch out of the series - fix phy-names Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: add msm8996 compatible to gicv3Srinivas Kandagatla1-1/+1
Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-24arm64: dts: qcom: pmi8998: add interrupt controller propertiesBrian Masney1-14/+2
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24arm64: dts: qcom: pmi8994: add interrupt controller propertiesBrian Masney1-10/+2
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24arm64: dts: qcom: pm8998: add interrupt controller propertiesBrian Masney1-26/+2
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24arm64: dts: qcom: pm8005: add interrupt controller propertiesBrian Masney1-4/+2
Add interrupt controller properties now that spmi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. This change was not tested on any hardware but the same change was tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with no issues. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24arm64: dts: allwinner: a64: Enable A64 timer workaroundSamuel Holland1-0/+1
As instability in the architectural timer has been observed on multiple devices using this SoC, inluding the Pine64 and the Orange Pi Win, enable the workaround in the SoC's device tree. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2019-01-23arm64/xen: fix xen-swiotlb cache flushingChristoph Hellwig3-6/+77
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA DMA mapping operations stored in the struct device arch data. Switching arm64 to use the direct calls for the merged DMA direct / swiotlb code broke this scheme. Replace the indirect calls with direct-calls in xen-swiotlb as well to fix this problem. Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-23arm64: dts: renesas: cat875: Add ethernet supportBiju Das1-0/+30
This patch adds ethernet support to the sub board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a774c0-cat874: Add uSD supportBiju Das1-0/+50
This patch adds uSD card support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a774c0-cat874: Add pincontrol support to scif2Biju Das1-0/+10
This patch adds pincontrol support to scif2. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: Add Si-Linux EK874 board supportBiju Das3-1/+25
The EK874 development kit from Silicon Linux is made of CAT874 (the main board) and CAT875 (the sub board that goes on top of CAT874). Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: Add Si-Linux CAT874 board supportBiju Das2-0/+38
Basic support for the Si-Linux board based on RZ/G2E: - Memory, - Main crystal, - Serial console Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3Simon Horman1-0/+1
Enable HS400 of SDHI3 using the corresponding DT property. No further changes are required. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2019-01-23arm64: dts: renesas: r8a77990: Enable DMA for SCIF2Geert Uytterhoeven1-1/+3
SCIF2 on R-Car E3 can be used with both DMAC1 and DMAC2. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2Geert Uytterhoeven1-0/+3
SCIF2 on RZ/G2E can be used with both DMAC1 and DMAC2. Fixes: 1b24f9e8ea3ff95f ("arm64: dts: renesas: r8a774c0: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numberingMarek Vasut1-1/+1
There are two regulator1 nodes in the Ebisu DTS right now, one 3.3V for the eMMC and one 12V for the backlight. This causes one to be overwritten by the other, ultimatelly resulting in inoperable eMMC, which depends on the former. Fix this by renumbering the backlight regulator to regulator2. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reported-by: Simon Horman <horms+renesas@verge.net.au> Fixes: 9d16c4a10e07 ("arm64: dts: renesas: r8a77990: ebisu: Add backlight") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQSergei Shtylyov1-0/+2
Specify EtherAVB PHY IRQ in the V3M Starter Kit board's device tree, now that we have the GPIO support (previously phylib had to resort to polling). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990-ebisu: use simple-audio-cardKuninori Morimoto1-4/+1
Current Ebisu board is using simple-scu-audio-card which is used for Sampling Rate Convert, or MIXer, etc. But, Ebisu is not using such feature. Then, simple-audio-card is very enough. This patch fixup it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssiKuninori Morimoto1-20/+20
Before, BUSIF which is needed for DMA transfer was automatically handled via SSI, but it cared BUSIF0 only. Now, rsnd driver can handle BUSIF0-7 (= for Gen3) BUSIF0-3 (= for Gen2) via SSIU, and it is keeping compatibility. Thus, BUSIF0 settings via SSI had been kept to avoid git merge timing issue / git bisect issue, but it is no longer needed. This patch removes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssiKuninori Morimoto1-20/+20
Before, BUSIF which is needed for DMA transfer was automatically handled via SSI, but it cared BUSIF0 only. Now, rsnd driver can handle BUSIF0-7 (= for Gen3) BUSIF0-3 (= for Gen2) via SSIU, and it is keeping compatibility. Thus, BUSIF0 settings via SSI had been kept to avoid git merge timing issue / git bisect issue, but it is no longer needed. This patch removes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: ulcb-kf: add pcm3168 sound codecKuninori Morimoto1-0/+138
KingFisher has pcm3168 sound codec. This patch enables it. Because pcm3168 can't handle symmetric channel on playback/ capture, we need to handle it as different DAI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: ulcb: add HDMI sound supportKuninori Morimoto1-2/+33
This patch adds missing ULCB HDMI sound support. To use sound card, HDMI video is mandatory. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: ulcb: use audio-graph-cardKuninori Morimoto1-17/+22
ULCB can use daughter board which is called as KingFisher. It has extra sound interface, thus we want to use it. But, basically, ALSA SoC can't use Multiple sound card with single CPU sound interface (= SSI). Thus we need to use Single Sound Card with multiple DAI interface. To be easy to expand ULCB sound card on KingFisher, it is better to use multi-dai-link style sound card on ULCB sound DT. Now, "simple-audio-card" / "audio-graph-card" both can support multi-dai-link style, but HDMI sound support (which is not yet supported on ULCB) needs "audio-graph-card". Using audio-graph-card is better selection. This patch exchange current sound card to use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindingsGeert Uytterhoeven1-2/+1
As of commit 6d2ca85279becdff ("dt-bindings: display: renesas: Deprecate LVDS support in the DU bindings"), the internal LVDS encoder has DT bindings separate from the DU. The device trees for all R-Car H3 and M3-W development boards were ported over to the new model, but Salvator-XS boards equipped with an R-Car M3-W SoC were forgotten. Fixes: 58e8ed2ee9abe718 ("arm64: dts: renesas: Convert to new LVDS DT bindings") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990: Sort i2c nodes within soc nodeGeert Uytterhoeven1-68/+68
Move the i2c nodes so that sub-nodes of the soc node are sorted by bus address. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-23arm64: dts: renesas: r8a77990: sort pciec0 node within soc nodeSimon Horman1-27/+27
Move the pciec0 node so that sub-nodes of the soc node are sorted by bus address. This change has no run-time affect. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-23arm64: dts: renesas: r8a774a1: Fix hsusb reg sizeFabrizio Castro1-1/+1
HS-USB has registers outside the currently specified memory area, therefore change the definition accordingly. Fixes: ed898d4fc19d ("arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes") Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodesFabrizio Castro1-0/+88
Add device nodes for VIN4, VIN5 and CSI40 to RZ/G2E (a.k.a. R8A774C0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add PCIe device nodeFabrizio Castro1-0/+27
This patch adds PCI express channel 0 device tree node to the RZ/G2E (a.k.a. R8A774C0) SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMUFabrizio Castro1-0/+8
Hook up the RZ/G2E Audio-DMAC device to IPMMU-MP as stated by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMUFabrizio Castro1-0/+1
Hook up the RZ/G2E AVB device to IPMMU-DS0 as stated by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMUFabrizio Castro1-0/+24
Hook up SYS-DMAC0, SYS-DMAC1, and SYS-DMAC2 to IPMMU-DS0 and IPMMU-DS1, according to what reported by the RZ/G2 User's manual. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB3.0 device nodesFabrizio Castro1-0/+22
Add usb3.0 host and function device nodes to the RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB-DMAC and HSUSB device nodesFabrizio Castro1-0/+45
Add usb dmac and hsusb device nodes on RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add USB2.0 phy and host device nodesFabrizio Castro1-0/+37
Add USB2.0 phy and host (EHCI/OHCI) device tree nodes to the RZ/G2E SoC dtsi. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add display output supportFabrizio Castro1-0/+167
The RZ/G2E (a.k.a. R8A774C0) has one RGB output and two LVDS outputs connected to DU. This patch add support for DU, LVDS encoders, VSP and FCP. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add PWM supportFabrizio Castro1-0/+70
Add PWM support to the RZ/G2E (a.k.a. R8A774C0) SoC specific device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add audio supportFabrizio Castro1-0/+241
Add sound support for the RZ/G2E SoC (a.k.a. R8A774C0). This work is based on similar work done on the R8A77990 SoC by Yoshihiro Kaneko <ykaneko0929@gmail.com>. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add MSIOF nodesFabrizio Castro1-0/+62
Add the device nodes for all MSIOF SPI controllers on RZ/G2E SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add thermal supportFabrizio Castro1-0/+31
This patch adds the thermal device node and the thermal-zones node to the SoC specific dtsi for the RZ/G2E. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add CAN nodesFabrizio Castro1-0/+24
Add the device nodes for both RZ/G2E CAN channels. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add IPMMU device nodesFabrizio Castro1-0/+73
Add r8a774c0 IPMMU nodes. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add I2C and IIC-DVFS supportFabrizio Castro1-0/+143
Add the I2C[0-7] and IIC Bus Interface for DVFS (IIC for DVFS) devices nodes to the r8a774c0 device tree. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-22arm64: dts: renesas: r8a774c0: Add SDHI nodesFabrizio Castro1-0/+36
Add SDHI nodes to the DT of the r8a774c0 SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.