aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08arm64: mm: define NET_IP_ALIGN to 0Ard Biesheuvel1-0/+8
On arm64, there is no need to add 2 bytes of padding to the start of each network buffer just to make the IP header appear 32-bit aligned. Since this might actually adversely affect DMA performance some platforms, let's override NET_IP_ALIGN to 0 to get rid of this padding. Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-08arm64: dts: renesas: r8a7795: add SSIU support for soundKuninori Morimoto1-0/+211
rsnd driver supports SSIU now, let's use it. Then, BUSIF DMA settings on rcar_sound,ssi (= rxu, txu) are no longer needed. To avoid git merge timing issue / git bisect issue, this patch doesn't remove it so far, but will be removed in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-08arm64: dts: renesas: r8a77990: Fix VIN endpoint numberingJacopo Mondi1-2/+10
The VIN driver bindings dictates fixed numbering for VIN endpoints connected to CSI-2 endpoints, even when a single endpoint exists. Without proper endpoint numbering the VIN driver fails to probe. Based on a patch in BSP from Koji Matsuoka <koji.matsuoka.xm@renesas.com> Fixes: ec70407ae7d7 ("arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes") Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-08arm64: dts: renesas: ebisu: Add and enable SDHI device nodesTakeshi Kihara2-0/+166
This patch adds SDHI{0,1,3} device nodes for the r8a77990 SoC and enables SD card slot connected to SDHI0, micro SD card slot connected to SDHI1 and eMMC connected to SDHI3 on the Ebisu board using the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-08arm64: dts: renesas: ebisu: Add serial console pinsTakeshi Kihara1-0/+8
This patch adds pin control for SCIF2 on R8A77990 E3 Ebisu. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-07Merge tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into fixesOlof Johansson1-0/+3
ARM: dts: stratix10: fix multicast filtering On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. * tag 'stratix10_dts_fix_for_v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: fix multicast filtering Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-07arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 boardJernej Skrabec1-0/+25
Pine H64 board has HDMI type A connector. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-07arm64: dts: allwinner: h6: Add HDMI pipelineJernej Skrabec1-0/+201
This commit adds all entries needed for HDMI to function properly. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> [added DE3 bus] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-06arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCBMarek Vasut2-14/+2
The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust the pinmux to match the bus, which is always operating in 1.8V mode. While at it, deduplicate the pinmux entries, which are now the same for both default and UHS modes. We still need the two pinctrl entries to match the bindings though. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-06arm64: dts: zynqmp: Add DDRC nodeManish Narani1-0/+7
Add ddrc memory controller node in dts. The size mentioned in dts is 0x30000, because we need to access DDR_QOS INTR registers located at 0xFD090208 from this driver. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-06arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source propertySudeep Holla4-4/+4
Most of the legacy "gpio-key,wakeup" boolean property is already replaced with "wakeup-source". However few occurrences of old property has popped up again, probably from the remnants in downstream trees. This patch replaces the legacy properties with the unified "wakeup-source" property introduced by: "Input: gpio_keys - switch to using generic device properties" (sha1: 700a38b27eefc582099fdf69effacfad0ad738a4) Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-06arm64: dts: zynqmp: Use mmc@ instead sdhci@Michal Simek1-2/+2
mmc name is recommended based on devicetree specification. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-11-06arm64: dts: rockchip: add Gru Scarlet devicetreesHeiko Stuebner4-0/+662
Gru-Scarlet is a tablet device using ChomeOS, dual-dsi display and Wacom touchscreen with stylus. There exist two variants in the market using different displays that are differentiated via their sku-id. The bootloader on them also determines the correct devicetree to load via the sku-id. So add a common scarlet dtsi and two minimal board devicetrees for the two display variants. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Rob Herring <robh@kernel.org>
2018-11-05arm64: dts: stratix10: fix multicast filteringAaro Koskinen1-0/+3
On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: stable@vger.kernel.org Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-11-05arm64: dts: renesas: r8a77990: Add all HSCIF nodesTakeshi Kihara1-0/+88
This patch adds the device nodes for all HSCIF serial ports to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: allwinner: h6: Add OrangePi Lite2 initial supportJagan Teki2-0/+12
OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: allwinner: h6: Add common orangepi nodes into dtsiJagan Teki2-139/+151
Based on the information from hardware schematics and orangepi vendor orangepi H6 boards, One Plus and Lite2 shares common nodes like axp805, uart, mmc0 etc. The common differences between them is - One Plus, has Ethernet - Lite2, has Wifi, USB3, CSI port. So, add common orangepi nodes into sun50i-h6-orangepi.dtsi so-that it case use on respective orangepi h6 board dts files. Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: dts: renesas: r8a779{7|8}0: add TMU supportSergei Shtylyov2-0/+130
Describe TMUs in the R8A779{7|8}0 device trees. Based on the original (and large) patches by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: ebisu: Enable AudioTakeshi Kihara1-0/+127
This patch enables Audio for the Ebisu board on R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: Add Audio-DMAC and Sound device nodesYoshihiro Kaneko1-0/+271
This patch adds Audio-DMAC0 device node and Sound device node for the R8A77990 SoC. Based on work by Takeshi Kihara and Hai Nguyen Pham. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> [simon: dropped include update, which is already present] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a7799{0|5}: add/enable USB2.0 peripheralYoshihiro Shimoda4-1/+118
This patch adds/enables USB2.0 peripheral for R-Car [DE]3 boards. R-Car E3 Ebisu board connects the ID pin to the SoC, so this adds a group "usb0_id" into usb0_pins node. Also, to use SW15 pin 3 side, this patch adds vbus0_usb2 node on r8a77990-ebisu.dts. R-Car D3 Draak board doesn't connect the ID pin, so this adds "renesas,no-otg-pins" property into usb2_phy0 node. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: salvator-common: add companion property in usb3_peri0Yoshihiro Shimoda1-0/+2
This patch adds a property "companion" with xhci0 phandle to the usb3_peri0 node in salvator-common.dtsi. About the detail of this property for renesas_usb3 udc driver, please refer to the commit 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch"). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: Connect R-Car E3 AVB to IPMMUMagnus Damm1-0/+1
Hook up the R-Car E3 AVB device to IPMMU-DS0 16 as described in the data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77980: Connect R-Car V3H AVB to IPMMUMagnus Damm1-0/+1
Hook up the R-Car V3H AVB device to IPMMU-DS1 33 as described in the data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77965: Connect R-Car M3-N AVB to IPMMUMagnus Damm1-0/+1
Hook up the R-Car M3-N AVB device to IPMMU-DS0 16 as described in the data sheet. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: add/enable USB3.0 peripheral device nodeYoshihiro Shimoda2-0/+16
This patch adds/enables USB3.0 peripheral device node for r8a77990 ebisu board. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: condor: switch from EtherAVB to GEtherSergei Shtylyov1-23/+24
The "official" Condor boards have always been wired to mount NFS via GEther, not EtherAVB -- the boards resoldered for EtherAVB were local to Cogent Embedded, so we've been having an unpleasant situation where a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY extension board is plugged in). Switch from EtherAVB to GEther at last! Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a7795: add missing dma-names on hscif2Kuninori Morimoto1-1/+1
hscif2 has 4 dmas, but has only 2 dma-names. This patch add missing dma-names. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e0f0bda79337701a ("arm64: dts: renesas: r8a7795: sort subnodes of the soc node") Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: Add SCIF-{0,1,3,4,5} device nodesTakeshi Kihara1-0/+83
This patch adds the device nodes for SCIF-{0,1,3,4,5} serial ports to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a779{7|8}0: add MSIOF supportSergei Shtylyov2-0/+116
Describe MSIOF in the R8A779{7|8}0 device trees. The DMA props are omitted for R8A77980 as the RT-DMAC isn't supported (yet?)... Based on the original (and large) patches by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a774a1: Add VIN and CSI-2 nodesBiju Das1-0/+367
Add VIN and CSI-2 nodes to RZ/G2M SoC dtsi. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: revise hsusb's reg sizeYoshihiro Shimoda3-4/+4
This patch revises the reg size of each hsusb device node for r8a7795, r8a7796 and r8a77965. Reported-by: Biju Das <biju.das@bp.renesas.com> Fixes: d2422e108812 ("arm64: dts: r8a7795: Add HSUSB device node") Fixes: 4725f2b88057 ("arm64: dts: renesas: r8a7795: add hsusb ch3 device node") Fixes: b9535853777f ("arm64: dts: r8a7796: Add HSUSB device node") Fixes: 9e1b00a2ef43 ("arm64: dts: renesas: r8a77965: Add "reg" properties") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77965: Add LVDS supportLaurent Pinchart1-0/+27
The M3-N (r8a77965) platform has one LVDS encoder connected to the DU. Add the corresponding DT node and wire it up. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77980: add thermal supportSergei Shtylyov1-0/+53
Describe THS/CIVM in the R8A77980 device trees. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77970: add thermal supportSergei Shtylyov1-0/+32
Describe THS/CIVM in the R8A77970 device tree. Based on the original (and large) patches by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: Add DMA properties to MSIOF nodesYoshihiro Kaneko1-0/+10
This patch adds DMA properties to the MSIOF device nodes of R8A77990 SoC. Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a779{7|8}0: add PWM supportSergei Shtylyov2-0/+100
Describe PWMs in the R8A779{7|8}0 device trees. Based on the original (and large) patches by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a77990: Add INTC-EX device nodeTakeshi Kihara1-0/+16
This patch adds a device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car E3, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a7795: remove unneeded sound #address/size-cellsKuninori Morimoto5-14/+9
commit 2d87dc0e5be2 ("arm64: dts: renesas: r8a7795: Add address properties to rcar_sound port nodes") added missing #address-cells and #size-cells for sound ports. But, these are based on platform, not on SoC. This patch cleanups it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: dts: renesas: r8a774a1: Add CAN nodesChris Paterson1-0/+24
Add the device nodes for both RZ/G2M CAN channels. Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-11-05arm64: allwinner: h6: add support for the Ethernet on Pine H64Icenowy Zheng1-0/+20
The Pine H64 board has an Ethernet port, which is connected to a RTL8211E PHY, then the PHY is connected to the MAC on H6 SoC. Add support for the Ethernet port. The PHY needs some time to start up, and the time is modelled as enable ramp delay of the regulator. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: allwinner: h6: add EMAC device nodesIcenowy Zheng1-0/+28
Allwinner H6 SoC has an EMAC like the one in A64. Add device tree nodes for the H6 DTSI file. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: dts: allwinner: new board - Emlid Neutis N5Aleksandr Aleksandrov3-0/+211
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis n5 dtsi file for SoM needs - add neutis devboard dts file - add neutis devboard target to dtb makefile Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: dts: allwinner: add backlight regulator for PinebookVasily Khoruzhick1-0/+10
Backlight power is controlled by PH6 GPIO, so add corresponding regulator-fixed node for it. Otherwise backlight won't light up if bootloader doesn't enable it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: defconfig: Enable MFD_AXP20X_I2CJagan Teki1-0/+1
The Allwinner H6 SoC is paired with the X-Powers AXP805 PMIC connected via I2C. Enable the driver for this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # OPI-1+ Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-11-05arm64: dts: rockchip: move backlight from rk3399 sapphire to excavatorVicente Bergas2-44/+41
The backlight is for the eDP panel and it has the connector on the excavator baseboard. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-05arm64: dts: rockchip: Use default brightness table for rk3399-gruEnric Balletbo i Serra1-8/+0
After commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") the pwm_bl driver is able to calculate a default brightness table. The calculated table for this PWM will have more granularity and will be adjusted to change the brightness linearly to the human eye. Use that table instead of have a DT-defined table with less granularity. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-05arm64: dts: rockchip: add chosen node on rk3399-sapphireVicente Bergas1-0/+4
In order to use earlycon, the stdout-path property needs to be set in the chosen node. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-05arm64: dts: rockchip: enable HS200 for eMMC on rock64Vasily Khoruzhick1-0/+1
eMMC that's sold by Pine64 can do HS200, rk3328 can do it as well, so update DTS to enable it. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-11-05arm64: dts: rockchip: add fan on rk3399-sapphire boardVicente Bergas1-0/+38
The Sapphire board has a 12V fan. So, adding it to the DTS. There is no power supply directly connected, it needs the baseboard to work. If the board is used standalone then a hardware modification is needed. On the Sapphire board there is an unpopulated resistor to connect it to VBUS_TYPEC, which is usually 5V (too low) and can range up to 20V (too high). I tested it for a week connected to VCC_SYS which is 8.4V and proved to be more than enough for the required cooling needs. This is the connection described in the comment. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.