| Age | Commit message (Collapse) | Author | Files | Lines |
|
arm64: dts: Amlogic updates for v5.9 (round 4)
- odroid-n2: add audio output
* tag 'amlogic-dt64-4' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: odroid-n2: add jack audio output support
arm64: dts: meson: odroid-n2: enable audio loopback
Link: https://lore.kernel.org/r/7ho8nx2b0t.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When a tracing BPF program attempts to read memory without using the
bpf_probe_read() helper, the verifier marks the load instruction with
the BPF_PROBE_MEM flag. Since the arm64 JIT does not currently recognize
this flag it falls back to the interpreter.
Add support for BPF_PROBE_MEM, by appending an exception table to the
BPF program. If the load instruction causes a data abort, the fixup
infrastructure finds the exception table and fixes up the fault, by
clearing the destination register and jumping over the faulting
instruction.
To keep the compact exception table entry format, inspect the pc in
fixup_exception(). A more generic solution would add a "handler" field
to the table entry, like on x86 and s390.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200728152122.1292756-2-jean-philippe@linaro.org
|
|
Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...
Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <geffrey.guo@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825
("arm64: simplify ptrauth initialization") removed the keys from the
secondary_data structure.
This also cures a compilation issue introduced by f227e3ec3b5c
("random32: update the net random state on interrupt and activity").
Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization")
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.
Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1078
Link: https://lore.kernel.org/r/20200730153701.3892953-1-samitolvanen@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To allow for re-injection of stage-2 faults on stage-1 page-table walks
due to either a missing or read-only memslot, move the triage logic out
of io_mem_abort() and into kvm_handle_guest_abort(), where these aborts
can be handled before anything else.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200729102821.23392-5-will@kernel.org
|
|
If a guest performs cache maintenance on a read-only memslot, we should
inform userspace rather than skip the instruction altogether.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200729102821.23392-4-will@kernel.org
|
|
If the guest generates a synchronous external abort which is not handled
by the host, we inject it back into the guest as a virtual SError, but
only if the original fault was reported on the data side. Instruction
faults are reported as "Unsupported FSC", causing the vCPU run loop to
bail with -EFAULT.
Although synchronous external aborts from a guest are pretty unusual,
treat them the same regardless of whether they are taken as data or
instruction aborts by EL2.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200729102821.23392-3-will@kernel.org
|
|
kvm_vcpu_dabt_isextabt() is not specific to data aborts and, unlike
kvm_vcpu_dabt_issext(), has nothing to do with sign extension.
Rename it to 'kvm_vcpu_abt_issea()'.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200729102821.23392-2-will@kernel.org
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Some compilers may put a subset of generated functions into '.text.*'
ELF sections and the linker may leverage this division to optimize ELF
layout. Unfortunately, the recently introduced HYPCOPY command assumes
that all executable code (with the exception of specialized sections
such as '.hyp.idmap.text') is in the '.text' section. If this
assumption is broken, code in '.text.*' will be merged into kernel
proper '.text' instead of the '.hyp.text' that is mapped in EL2.
To ensure that this cannot happen, insert an OBJDUMP assertion into
HYPCOPY. The command dumps a list of ELF sections in the input object
file and greps for '.text.'. If found, compilation fails. Tested with
both binutils' and LLVM's objdump (the output format is different).
GCC offers '-fno-reorder-functions' to disable this behaviour. Select
the flag if it is available. From inspection of GCC source (latest
Git in July 2020), this flag does force all code into '.text'.
By default, GCC uses profile data, heuristics and attributes to select
a subsection.
LLVM/Clang currently does not have a similar optimization pass. It can
place static constructors into '.text.startup' and it's optimizer can
be provided with profile data to reorder hot/cold functions. Neither
of these is applicable to nVHE hyp code. If this changes in the future,
the OBJDUMP assertion should alert users to the problem.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200730132519.48787-1-dbrazdil@google.com
|
|
On arm64, smp_processor_id() reads a per-cpu `cpu_number` variable,
using the per-cpu offset stored in the tpidr_el1 system register. In
some cases we generate a per-cpu address with a sequence like:
cpu_ptr = &per_cpu(ptr, smp_processor_id());
Which potentially incurs a cache miss for both `cpu_number` and the
in-memory `__per_cpu_offset` array. This can be written more optimally
as:
cpu_ptr = this_cpu_ptr(ptr);
Which only needs the offset from tpidr_el1, and does not need to
load from memory.
The following two test cases show a small performance improvement measured
on a 46-cpus qualcomm machine with 5.8.0-rc4 kernel.
Test 1: (about 0.3% improvement)
#cat b.sh
make clean && make all -j138
#perf stat --repeat 10 --null --sync sh b.sh
- before this patch
Performance counter stats for 'sh b.sh' (10 runs):
298.62 +- 1.86 seconds time elapsed ( +- 0.62% )
- after this patch
Performance counter stats for 'sh b.sh' (10 runs):
297.734 +- 0.954 seconds time elapsed ( +- 0.32% )
Test 2: (about 1.69% improvement)
'perf stat -r 10 perf bench sched messaging'
Then sum the total time of 'sched/messaging' by manual.
- before this patch
total 0.707 sec for 10 times
- after this patch
totol 0.695 sec for 10 times
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vladimir Murzin <vladimir.murzin@arm.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1594389852-19949-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Drop the repeated word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20200726003207.20253-4-rdunlap@infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Drop the repeated word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20200726003207.20253-3-rdunlap@infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Drop the repeated words "at" and "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20200726003207.20253-2-rdunlap@infradead.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add support for audio on jack socket of the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200701094556.194498-3-jbrunet@baylibre.com
|
|
Add capture pcm interfaces and loopback routes to the odroid-n2
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200701094556.194498-2-jbrunet@baylibre.com
|
|
arm64: dts: amlogic updates for v5.9 (round3)
- minor fixes
* tag 'amlogic-dt64-3' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3
arm64: dts: meson: misc fixups for w400 dtsi
Link: https://lore.kernel.org/r/7h5za746al.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
|
|
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
|
|
Qian reported that the current setup forgoes the Kconfig dependencies and
results in warnings such as:
WARNING: unmet direct dependencies detected for SCHED_THERMAL_PRESSURE
Depends on [n]: SMP [=y] && CPU_FREQ_THERMAL [=n]
Selected by [y]:
- ARM64 [=y]
Revert commit
e17ae7fea871 ("arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE")
and re-implement it by making the option default to 'y' for arm64 and arm,
which respects Kconfig dependencies (i.e. will remain 'n' if
CPU_FREQ_THERMAL=n).
Fixes: e17ae7fea871 ("arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200729135718.1871-1-valentin.schneider@arm.com
|
|
|
|
Pull ARM SoC DT fixes from Arnd Bergmann:
"These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in an
earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the
H6"
* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The HARDEN_EL2_VECTORS config maps vectors at a fixed location on cores which
are susceptible to Spector variant 3a (A57, A72) to prevent defeating hyp
layout randomization by leaking the value of VBAR_EL2.
Since this feature is only applicable when EL2 layout randomization is enabled,
unify both behind the same RANDOMIZE_BASE Kconfig. Majority of code remains
conditional on a capability selected for the affected cores.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200721094445.82184-3-dbrazdil@google.com
|
|
If there are spare bits in non-VHE hyp VA, KVM unconditionally replaces them
with a random tag chosen at init. Disable this if the kernel is built without
RANDOMIZE_BASE to align with kernel behavior.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200721094445.82184-2-dbrazdil@google.com
|
|
This patch adds i2c devices and muxes to the Sparx5 reference boards.
Link: https://lore.kernel.org/r/20200615133242.24911-11-lars.povlsen@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This adds a DPLL clock to the Sparx5 SoC. It is used to generate clock
to misc peripherals, specifically the SDHCI/eMMC controller.
Link: https://lore.kernel.org/r/20200615133242.24911-10-lars.povlsen@microchip.com
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If a stage-2 page-table contains an executable, read-only mapping at the
pte level (e.g. due to dirty logging being enabled), a subsequent write
fault to the same page which tries to install a larger block mapping
(e.g. due to dirty logging having been disabled) will erroneously inherit
the exec permission and consequently skip I-cache invalidation for the
rest of the block.
Ensure that exec permission is only inherited by write faults when the
new mapping is of the same size as the existing one. A subsequent
instruction abort will result in I-cache invalidation for the entire
block mapping.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200723101714.15873-1-will@kernel.org
|
|
So far, vcpu_has_ptrauth() is implemented in terms of system_supports_*_auth()
calls, which are declared "inline". In some specific conditions (clang
and SCS), the "inline" very much turns into an "out of line", which
leads to a fireworks when this predicate is evaluated on a non-VHE
system (right at the beginning of __hyp_handle_ptrauth).
Instead, make sure vcpu_has_ptrauth gets expanded inline by directly
using the cpus_have_final_cap() helpers, which are __always_inline,
generate much better code, and are the only thing that make sense when
running at EL2 on a nVHE system.
Fixes: 29eb5a3c57f7 ("KVM: arm64: Handle PtrAuth traps early")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200722162231.3689767-1-maz@kernel.org
|
|
Add device tree support for the Microsoft Lumia 950 smartphone.
It is based on msm8992 and supports booting Linux via a custom
EDK2 port.
Currently it supports:
* Screen console via EFIFB
* Booting via EFI_STUB
* SDHCI
* I2C
* PSCI core bringup
Please note that there is an implementation of EL2 startup
on this board, but it requires the user to resign from
PSCI and use spin-table instead. This revision sticks with
PSCI.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-14-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This commit adds support for the Xiaomi Libra (Mi 4C)
smartphone. It's based on the Qualcomm msm8992 SoC.
It currently supports:
* Screen console from bootloader
* SDHCI
* Regulator configuration
* Serial console
* I2C
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-13-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This lets us use clocks provided by RPM.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-12-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This SoC's firmware does not fully support the PSCI
spec, but it's good enough to bring the cores up.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-11-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add the PMU so we can get proper perf event support on this SoC.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-10-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add support for I2C to enable support for peripherals
such as touchscreens or sensors. Also add BLSP_UART2 interface.
Please note that the naming scheme follows downstream and as
abominable as it is, that's what we get.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-9-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add SPMI PMIC arbiter device to communicate with PMICs
attached to SPMI bus.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-8-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-7-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This commit adds cpu nodes for all 6 cores
present on this SoC and the cpu-map.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-6-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This pinout is common for every 8992-based device and
should therefore reside in the SoC device tree.
Also convert addresses into phandles.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-5-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add the property required for the bootloader to select
the correct device tree blob. It has been removed from
the SoC device tree as it should be set on a per-device
basis.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-4-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This commit ensures the correct IRQ type is set
and disables the device by default.
The mmc-hs400-1_8v property is also moved to
Bullhead as it might not be present on all boards.
The node has been renamed to sdhci@ instead of mmc@
and the phandle was changed to sdhc_1 to comply with
the newer DTS style.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-3-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- retire msm8992-pins.dtsi
- add some of the missing pins
- make comments C-style
- make apcs a mailbox
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200625182118.131476-2-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com
[bjorn: Changed vendor identifier in board compatible from somc to sony]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-8-konradybcio@gmail.com
[bjorn: Squashed with change that remove regulators from msm8992.dtsi]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add support for SMD RPM, including pm8994 and pmi8994
regulators.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-7-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|