Age | Commit message (Collapse) | Author | Files | Lines |
|
on MMU targets EFAULT is possible here. Make both return 0 or error,
passing what used to be the return value of flat_get_addr_from_rp()
by reference.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued work to add support for 5-level paging provided by future
Intel CPUs. In particular we switch the x86 GUP code to the generic
implementation. (Kirill A. Shutemov)
- Continued work to add PCID CPU support to native kernels as well.
In this round most of the focus is on reworking/refreshing the TLB
flush infrastructure for the upcoming PCID changes. (Andy
Lutomirski)"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Delete a big outdated comment about TLB flushing
x86/mm: Don't reenter flush_tlb_func_common()
x86/KASLR: Fix detection 32/64 bit bootloaders for 5-level paging
x86/ftrace: Exclude functions in head64.c from function-tracing
x86/mmap, ASLR: Do not treat unlimited-stack tasks as legacy mmap
x86/mm: Remove reset_lazy_tlbstate()
x86/ldt: Simplify the LDT switching logic
x86/boot/64: Put __startup_64() into .head.text
x86/mm: Add support for 5-level paging for KASLR
x86/mm: Make kernel_physical_mapping_init() support 5-level paging
x86/mm: Add sync_global_pgds() for configuration with 5-level paging
x86/boot/64: Add support of additional page table level during early boot
x86/boot/64: Rename init_level4_pgt and early_level4_pgt
x86/boot/64: Rewrite startup_64() in C
x86/boot/compressed: Enable 5-level paging during decompression stage
x86/boot/efi: Define __KERNEL32_CS GDT on 64-bit configurations
x86/boot/efi: Fix __KERNEL_CS definition of GDT entry on 64-bit configurations
x86/boot/efi: Cleanup initialization of GDT entries
x86/asm: Fix comment in return_from_SYSCALL_64()
x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation
...
|
|
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
|
|
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Rework the EFI capsule loader to allow for workarounds for
non-compliant firmware (Ard Biesheuvel)
- Implement a capsule loader quirk for Quark X102x (Jan Kiszka)
- Enable SMBIOS/DMI support for the ARM architecture (Ard Biesheuvel)
- Add CONFIG_EFI_PGT_DUMP=y support for x86-32 and kexec (Sai
Praneeth)
- Fixes for EFI support for Xen dom0 guests running under x86-64
hosts (Daniel Kiper)"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen/efi: Initialize only the EFI struct members used by Xen
efi: Process the MEMATTR table only if EFI_MEMMAP is enabled
efi/arm: Enable DMI/SMBIOS
x86/efi: Extend CONFIG_EFI_PGT_DUMP support to x86_32 and kexec as well
efi/efi_test: Use memdup_user() helper
efi/capsule: Add support for Quark security header
efi/capsule-loader: Use page addresses rather than struct page pointers
efi/capsule-loader: Redirect calls to efi_capsule_setup_info() via weak alias
efi/capsule: Remove NULL test on kmap()
efi/capsule-loader: Use a cached copy of the capsule header
efi/capsule: Adjust return type of efi_capsule_setup_info()
efi/capsule: Clean up pr_err/_info() messages
efi/capsule: Remove pr_debug() on ENOMEM or EFAULT
efi/capsule: Fix return code on failing kmap/vmap
|
|
The S500 SoC can start secondary CPUs without busy-looping for pen_release,
so simplify the SMP code compared to the LeMaker kernel tree.
Fixes: 172067e0bc87 ("ARM: owl: Implement CPU enable-method for S500")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Liu <liuwei@actions-semi.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rely on the fallback to "Generic DT based system".
This change is visible in /proc/cpuinfo.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu fixes for 4.12 (part 2)
Fix Openblock A6 (kirkwood base board) nand partition overlap
* tag 'mvebu-fixes-4.12-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix Openblock A6 nand partition overlap
arm64: marvell: dts: fix interrupts in 7k/8k crypto nodes
|
|
Legacy PCI host controllers (ie host controllers that set-up the PCI bus
through the ARM pci_common_init() API) are currently relying on
pci_fixup_irqs() to assign legacy PCI irqs to devices. This is not ideal
in that pci_fixup_irqs() assigns IRQs for all PCI devices present in a given
system some of which may well be enabled by the time pci_fixup_irqs() is
called (ie a system with multiple host controllers). With the introduction
of struct pci_host_bridge.(*map_irq) pointer it is possible to assign IRQs
for all devices originating from a PCI host bridge at probe time; this is
implemented through pci_assign_irq() that relies on the struct
pci_host_bridge.map_irq pointer to map IRQ for a given device.
The benefits this brings are twofold:
- the IRQ for a device is assigned once at probe time
- the IRQ assignment works also for hotplugged devices
Remove pci_fixup_irqs() call from bios32 code and rely on pci_assign_irq()
to carry out the IRQ mapping at device probe time.
The map_irq() and swizzle_irq() struct pci_host_bridge callbacks are set-up
in the struct pci_host_bridge created in the bios32 pcibios_init_hw()
function and mach-* code paths (for PCI mach implementations that require a
specific struct hw_pci.(*scan) function callback).
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: folded in fixes from Lorenzo:
http://lkml.kernel.org/r/20170701140629.GC8977@red-moon]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
|
|
Pull ARM fix from Russell King:
"One final fix for 4.12 - Doug found a boot failure case triggered by
requesting a non-even MB vmalloc size"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8685/1: ensure memblock-limit is pmd-aligned
|
|
Some function pointer structures are used externally to the kernel, like
the paravirt structures. These should never be randomized, so mark them
as such, in preparation for enabling randstruct's automatic selection
of all-function-pointer structures.
These markings are verbatim from Brad Spengler/PaX Team's code in the
last public patch of grsecurity/PaX based on my understanding of the
code. Changes or omissions from the original code are mine and don't
reflect the original grsecurity/PaX code.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
With the new task struct randomization, we can run into a build
failure for certain random seeds, which will place fields beyond
the allow immediate size in the assembly:
arch/arm/kernel/entry-armv.S: Assembler messages:
arch/arm/kernel/entry-armv.S:803: Error: bad immediate value for offset (4096)
Only two constants in asm-offset.h are affected, and I'm changing
both of them here to work correctly in all configurations.
One more macro has the problem, but is currently unused, so this
removes it instead of adding complexity.
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[kees: Adjust commit log slightly]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
DMA operations for NOMMU case have been just factored out into
separate compilation unit, so don't keep dead code.
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now, we have dedicated non-cacheable region for consistent DMA
operations. However, that region can still be marked as bufferable by
MPU, so it'd be safer to have barriers by default. M-class machines
that didn't need it until now also likely won't need it in the future,
therefore, we offer this as an option.
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
R/M classes of cpus can have memory covered by MPU which in turn might
configure RAM as Normal i.e. bufferable and cacheable. It breaks
dma_alloc_coherent() and friends, since data can stuck in caches now
or be buffered.
This patch factors out DMA support for NOMMU configuration into
separate entity which provides dedicated dma_ops. We have to handle
there several cases:
- configurations with MMU/MPU setup
- configurations without MMU/MPU setup
- special case for M-class, since caches and MPU there are optional
In general we rely on default DMA area for coherent allocations or/and
per-device memory reserves suitable for coherent DMA, so if such
regions are set coherent allocations go from there.
In case MMU/MPU was not setup we fallback to normal page allocator for
DMA memory allocation.
In case we run M-class cpus, for configuration without cache support
(like Cortex-M3/M4) dma operations are forced to be coherent and wired
with dma-noop (such decision is made based on cacheid global
variable); however, if caches are detected there and no DMA coherent
region is given (either default or per-device), dma is disallowed even
MPU is not set - it is because M-class implement system memory map
which defines part of address space as Normal memory.
Reported-by: Alexandre Torgue <alexandre.torgue@st.com>
Reported-by: Andras Szemzo <sza@esh.hu>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Andras Szemzo <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
[hch: removed the dma_supported() implementation that isn't required anymore]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
KVM/ARM updates for 4.13
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
Conflicts:
arch/s390/include/asm/kvm_host.h
|
|
The pmd containing memblock_limit is cleared by prepare_page_table()
which creates the opportunity for early_alloc() to allocate unmapped
memory if memblock_limit is not pmd aligned causing a boot-time hang.
Commit 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
attempted to resolve this problem, but there is a path through the
adjust_lowmem_bounds() routine where if all memory regions start and
end on pmd-aligned addresses the memblock_limit will be set to
arm_lowmem_limit.
Since arm_lowmem_limit can be affected by the vmalloc early parameter,
the value of arm_lowmem_limit may not be pmd-aligned. This commit
corrects this oversight such that memblock_limit is always rounded
down to pmd-alignment.
Fixes: 965278dcb8ab ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Pull "Actions Semi ARM SoC for v4.13 #2" from Andreas Färber:
This adds SMP code to bring up the remaining S500 CPU cores
by reusing a helper factored out of the SPS power domains driver.
* tag 'actions-arm-soc+sps-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
soc: actions: Add Owl SPS
dt-bindings: power: Add Owl SPS power domains
|
|
A wide variety of TI platforms support NAND via the
CONFIG_MTD_NAND_OMAP2 driver (and related BCH options), so enable this.
In addition, multi_v7_defconfig supports the dm8168-evm and that
supports root being on a SATA drive, so build the DM816 AHCI driver into
the resulting kernel as well.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber:
This adds an initial DT for the S500 SoC and a devboard based on it.
* tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
ARM: dts: owl-s500: Add SPS node
ARM: dts: owl-s500: Set CPU enable-method
dt-bindings: arm: cpus: Add S500 enable-method
ARM: dts: Add Actions Semi S500 and LeMaker Guitar
dt-bindings: arm: Document Actions Semi S900
dt-bindings: timer: Document Owl timer
dt-bindings: arm: Document Actions Semi S500
dt-bindings: Add vendor prefix for Actions Semi
|
|
Pull "Actions Semi ARM SoC for v4.13" from Andreas Färber:
This adds a Kconfig symbol and mach-actions with board and SMP code,
plus a MAINTAINERS entry.
* tag 'actions-arm-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
MAINTAINERS: Update Actions Semi section with SPS
ARM: owl: Implement CPU enable-method for S500
MAINTAINERS: Add Actions Semi Owl section
ARM: Prepare Actions Semi S500
|
|
Pull "Qualcomm ARM Based defconfig Updates for v4.13 - Part 2" from Andy Gross:
* Enable RPMSG_QCOM_SMD to get boards working again
* tag 'qcom-defconfig-for-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
|
|
Merge "Amlogic 32-bit DT changes for v4.13 (round 2)" from Kevin Hilman:
- greatly expands DT clock support for meson8b
* tag 'amlogic-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (22 commits)
ARM: dts: meson: use the real ethernet clock on Meson8 and Meson8b
ARM: dts: meson8b: add the SCU device node
ARM: dts: meson: add USB support on Meson8 and Meson8b
ARM: dts: meson: add the hardware random number generator
ARM: dts: meson8: add reserved memory zones
ARM: dts: meson: add the SAR ADC
ARM: dts: meson8: add the pins for the SDIO controller
ARM: dts: meson8: add the PWM_E and PWM_F pins
ARM: dts: meson: use GIC_SPI and IRQ_TYPE_EDGE_RISING macros
ARM: dts: meson: use C preprocessor friendly include syntax
ARM: dts: meson8: fix the IR receiver pins
clk: meson8b: export the ethernet gate clock
clk: meson8b: export the USB clocks
clk: meson8b: export the gate clock for the HW random number generator
clk: meson8b: export the SDIO clock
clk: meson8b: export the SAR ADC clocks
clk: meson-gxbb: un-export the CPU clock
clk: meson-gxbb: expose UART clocks
clk: meson-gxbb: expose SPICC gate
clk: meson-gxbb: expose spdif master clock
...
|
|
Linux 4.12-rc7
|
|
The introduction of pci_scan_root_bus_bridge() provides a PCI core API to
scan a PCI root bus backed by an already initialized struct pci_host_bridge
object, which simplifies the bus scan interface and makes the PCI scan root
bus interface easier to generalize as members are added to the struct
pci_host_bridge.
Convert ARM bios32 code to pci_scan_root_bus_bridge() to improve the PCI
root bus scanning interface.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[bhelgaas: fold in warning fix from Arnd Bergmann <arnd@arndb.de>:
http://lkml.kernel.org/r/20170621215323.3921382-1-arnd@arndb.de]
[bhelgaas: set bridge->ops for mv78xx0]
[bhelgaas: fold in fixes from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>:
http://lkml.kernel.org/r/20170701135457.GB8977@red-moon]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andrew Lunn <andrew@lunn.ch>
|
|
Same behavior, less code duplication.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
And instead wire it up as method for all the dma_map_ops instances.
Note that the code seems a little fishy for dmabounce and iommu, but
for now I'd like to preserve the existing behavior 1:1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
DMA_ERROR_CODE is going to go away, so don't rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull ARM fixes from Russell King:
"Three more fixes:
- Fix the previous fix merged in the last pull for the Thumb2
decompressor.
- A fix from Vladimir to correctly identify the V7M cache type.
- The optimised 3G vmsplit case does not work with LPAE, so don't
allow this to be selected for LPAE configurations"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8682/1: V7M: Set cacheid iff DminLine or IminLine is nonzero
ARM: 8681/1: make VMSPLIT_3G_OPT depends on !ARM_LPAE
ARM: 8680/1: boot/compressed: fix inappropriate Thumb2 mnemonic for __nop
|
|
I didn't find any use of this macro in the current kernel tree (with git
grep). KTHREAD_SIZE is no longer used for a very very long time. So
let's remove this definition.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Merge in arm64 ACPI RAS support (APEI/GHES) from Tyler Baicar.
|
|
As of commit 5052de8deff56, QCOM_SMD_RPM and various other config
options enabled in the qcom_defconfig depends on the RPMSG. If
QCOM_SMD_RPM config option is not selected it disables the
REGULATOR_QCOM_SMD_RPM and other essential config options.
Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
|
|
Bring up the two remaining CPUs by calling into PM domain code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Pull "SoCFPGA DTS updates for v4.13" from Dinh Nguyen:
- Fix clocks node the EMACs
- VINING board updtes
- Remove I2C EEPROMs and LED node
- Add QSPI device
- Add 2nd ethernet alias
- Add 'clock-frequency' binding for i2c node
* tag 'socfpga_dts_for_v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: set the i2c frequency
ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
ARM: dts: socfpga: Drop LED node from VINING FPGA
ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
ARM: dts: socfpga: Enable QSPI support on VINING FPGA
ARM: dts: socfpga: Fix the ethernet clock phandle
|
|
Use 'clock-frequency' binding for the i2c node that will put the I2C driver
into the standard operating mode. 'speed-mode' was not a valid binding for
the I2C driver, remove it.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add DT alias for the second ethernet present on mainboard rev 1.10.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Drop the LED node from VINing FPGA DT because the LED wiring is
different on each mainboard revision. This wiring is therefore
handled in mainboard DT Overlays.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Remove the EEPROMs attached to the I2C expander ports which
lead to the backplane slots from the main VIN|ING DTS file.
These EEPROMs are bound using separate DTO files, which lets
us handle both two-slot and six-slot configuration of the
backplane.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Enable the QSPI node and add the flash chips.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The ethernet block clock phandle must point to the clock node which
represents the clock which directly supply the ethernet block. This
is emac_x_clk , not emacx_clk , so fix this.
From: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Pull "SoCFPGA updates for v4.13" from Dinh Nguyen:
- Increase number of available GPIOs in Kconfig
* tag 'socfpga_updates_for_v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Increase max number of GPIOs
|
|
Pull "pxa-dt for v4.13" from Robert Jarzmik:
This device-tree pxa update brings :
- cpu operating points renaming from Viresh
* tag 'pxa-dt-4.13' of https://github.com/rjarzmik/linux:
ARM: pxa: Use - instead of @ for DT OPP entries
|
|
Pull "Samsung DeviceTree update for v4.13, part two" from Krzysztof Kozłowski:
1. Add needed property for CEC on Odroid U3,
2. Fix reset GPIO polarity on Rinato.
* tag 'samsung-dt-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Fix polarity of panel reset gpio in Rinato
ARM: dts: exynos: add needs-hpd to &hdmicec for Odroid-U3
|
|
Pull "ARM defconfig cleanup" from Krzysztof Kozłowski:
1. Remove old Kconfig options from all ARM configs,
2. Update Samsung defconfigs to bring back options over time got disabled
for some reason (configs were not updated along with the code),
3. Save defconfigs for Samsung.
* tag 'samsung-defconfig-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: tct_hammer_defconfig: Save defconfig
ARM: s5pv210_defconfig: Save defconfig
ARM: s3c6400_defconfig: Save defconfig
ARM: mini2440_defconfig: Save defconfig
ARM: s3c2410_defconfig: Save defconfig
ARM: exynos_defconfig: Save defconfig
ARM: s5pv210_defconfig: Bring back lost (but wanted) options
ARM: s3c6400_defconfig: Bring back lost (but wanted) options
ARM: s3c2410_defconfig: Bring back lost (but wanted) options
ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
ARM: mini2440_defconfig: Bring back lost (but wanted) options
ARM: defconfig: samsung: Re-order entries to match savedefconfig
ARM: defconfig: Cleanup from old Kconfig options
|
|
Currently external aborts are unsupported by the guest abort
handling. Add handling for SEAs so that the host kernel reports
SEAs which occur in the guest kernel.
When an SEA occurs in the guest kernel, the guest exits and is
routed to kvm_handle_guest_abort(). Prior to this patch, a print
message of an unsupported FSC would be printed and nothing else
would happen. With this patch, the code gets routed to the APEI
handling of SEAs in the host kernel to report the SEA information.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Originally, generated-y and genhdr-y had different meaning, like
follows:
- generated-y: generated headers (other than asm-generic wrappers)
- header-y : headers to be exported
- genhdr-y : generated headers to be exported (generated-y + header-y)
Since commit fcc8487d477a ("uapi: export all headers under uapi
directories"), headers under UAPI directories are all exported.
So, there is no more difference between generated-y and genhdr-y.
We see two users of genhdr-y, arch/{arm,x86}/include/uapi/asm/Kbuild.
They generate some headers in arch/{arm,x86}/include/generated/uapi/asm
directories, which are obviously exported.
Replace them with generated-y, and abolish genhdr-y.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
|
|
Allow to bring up CPU1.
Based on LeMaker linux-actions tree.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Add ARCH_ACTIONS and mach-actions/owl.c for "actions,s500".
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Increase the maximum number of GPIOs on SoCFPGA as this platform
can have many GPIO controllers in the FPGA part.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|