aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2014-03-12ARM: 8003/1: w90x900: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from arch/arm/mach-w90x900/time.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Wan zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 8002/1: spear: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from arch/arm/mach-spear/time.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 8001/1: mmp: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from arch/arm/mach-mmp/time.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 8000/1: misc: remove deprecated IRQF_DISABLEDMichael Opdenacker9-9/+8
This patch removes the use of the IRQF_DISABLED flag from miscellaneous code in mach-xxx and plat-xxx This flag is a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 7999/1: arch/arm/mach-lpc32xx-remove-irqf-disabledMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from arch/arm/mach-lpc32xx/timer.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 7998/1: IXP4xx: remove deprecated IRQF_DISABLEDMichael Opdenacker5-13/+7
This patch removes the use of the IRQF_DISABLED flag from code in arch/arm/mach-ixp4xx It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 7997/1: cns3xxx: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag from arch/arm/mach-cns3xxx/core.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 7996/1: floppy.h: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch removes the use of the IRQF_DISABLED flag in arch/arm/include/asm/floppy.h It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-12ARM: 7995/1: footbridge: remove obsolete IRQF_DISABLEDMichael Opdenacker3-7/+7
This patch removes the IRQF_DISABLED flag from footbridge code. It's a NOOP since 2.6.35. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7987/1: ARM : unwinder : Prevent data abort due to stack overflowAnurag Aggarwal1-37/+100
While unwinding backtrace, stack overflow is possible. This stack overflow can sometimes lead to data abort in system if the area after stack is not mapped to physical memory. To prevent this problem from happening, execute the instructions that can cause a data abort in separate helper functions, where a check for feasibility is made before reading each word from the stack. Signed-off-by: Anurag Aggarwal <a.anurag@samsung.com> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7982/1: introduce HWCAP2 feature bits for ARMv8 Crypto ExtensionsArd Biesheuvel2-0/+10
This allocates feature bits 0-4 in HWCAP2 for the crypto and CRC extensions introduced in ARMv8. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7981/1: add support for AT_HWCAP2 ELF auxv entryArd Biesheuvel3-1/+17
This enables AT_HWCAP2 for ARM. The generic support for this new ELF auxv entry was added in commit 2171364d1a9 (powerpc: Add HWCAP2 aux entry) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7986/1: bios32: use pci_enable_resource to enable PCI resourcesWill Deacon1-34/+3
This patch moves bios32 over to using the generic code for enabling PCI resources. Since the core code takes care of bridge resources too, we can also drop the explicit IO and MEMORY enabling for them in the arch code. A side-effect of this change is that we no longer explicitly enable devices when running in PCI_PROBE_ONLY mode. This stays closer to the meaning of the option and prevents us from trying to enable devices without any assigned resources (the core code refuses to enable resources without parents). Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7983/1: atomics: implement a better __atomic_add_unless for v6+Will Deacon1-4/+31
Looking at perf profiles of multi-threaded hackbench runs, a significant performance hit appears to manifest from the cmpxchg loop used to implement the 32-bit atomic_add_unless function. This can be mitigated by writing a direct implementation of __atomic_add_unless which doesn't require iteration outside of the atomic operation. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7990/1: asm: rename logical shift macros push pull into lspush lspullVictor Kamensky7-196/+196
Renames logical shift macros, 'push' and 'pull', defined in arch/arm/include/asm/assembler.h, into 'lspush' and 'lspull'. That eliminates name conflict between 'push' logical shift macro and 'push' instruction mnemonic. That allows assembler.h to be included in .S files that use 'push' instruction. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7989/1: Delete asm/system.hDavid Howells5-11/+1
Delete ARM's asm/system.h. It's the last holdout and should be got rid of. This builds for defconfig, lpc32xx_defconfig, exynos_defconfig + XEN, the previous changed to a Gemini system and an omap3 config with TI_DAVINCI_EMAC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7985/1: mm: implement pte_accessible for faulting mappingsWill Deacon1-2/+5
The pte_accessible macro can be used to identify page table entries capable of being cached by a TLB. In principle, this differs from pte_present, since PROT_NONE mappings are mapped using invalid entries identified as present and ptes designated as `old' can use either invalid entries or those with the access flag cleared (guaranteed not to be in the TLB). However, there is a race to take care of, as described in 20841405940e ("mm: fix TLB flush race between migration, and change_protection_range"), between a page being migrated and mprotected at the same time. In this case, we can check whether a TLB invalidation is pending for the mm and if so, temporarily consider PROT_NONE mappings as valid. This patch implements a quick pte_accessible macro for ARM by simply checking if the pte is valid/present depending on the mm. For classic MMU, these checks are identical and will generate some false positives for PROT_NONE mappings, but this is better than the current asm-generic definition of ((void)(pte),1). Finally, pte_present_user is moved to use pte_valid (and renamed appropriately) since we don't care about cache flushing for faulting mappings. Acked-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-25ARM: 7984/1: prefetch: add prefetchw invocations for barriered atomicsWill Deacon4-0/+23
After a bunch of benchmarking on the interaction between dmb and pldw, it turns out that issuing the pldw *after* the dmb instruction can give modest performance gains (~3% atomic_add_return improvement on a dual A15). This patch adds prefetchw invocations to our barriered atomic operations including cmpxchg, test_and_xxx and futexes. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18ARM: 7979/1: mm: Remove hugetlb warning from Coherent DMA allocatorSteven Capper1-3/+0
The Coherant DMA allocator allocates pages of high order then splits them up into smaller pages. This splitting logic would run into problems if the allocator was given compound pages. Thus the Coherant DMA allocator was originally incompatible with compound pages existing and, by extension, huge pages. A compile #error was put in place whenever huge pages were enabled. Compatibility with compound pages has since been introduced by the following commit (which merely excludes GFP_COMP pages from being requested by the coherant DMA allocator): ea2e705 ARM: 7172/1: dma: Drop GFP_COMP for DMA memory allocations When huge page support was introduced to ARM, the compile #error in dma-mapping.c was replaced by a #warning when it should have been removed instead. This patch removes the compile #warning in dma-mapping.c when huge pages are enabled. Signed-off-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18ARM: 7962/2: Make all mcpm functions notraceDave Martin2-0/+4
The functions in mcpm_entry.c are mostly intended for use during scary cache and coherency disabling sequences, or do other things which confuse trace ... like powering a CPU down and not returning. Similarly for the backend code. For simplicity, this patch just makes whole files notrace. There should be more than enough traceable points on the paths to these functions, but we can be more fine-grained later if there is a need for it. Jon Medhurst: Also added spc.o to the list of files as it contains functions used by MCPM code which have comments comments like: "might be used in code paths where normal cacheable locks are not working" Signed-off-by: Dave Martin <dave.martin@linaro.org> Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7954/1: mm: remove remaining domain support from ARMv6Will Deacon6-28/+18
CPU_32v6 currently selects CPU_USE_DOMAINS if CPU_V6 and MMU. This is because ARM 1136 r0pX CPUs lack the v6k extensions, and therefore do not have hardware thread registers. The lack of these registers requires the kernel to update the vectors page at each context switch in order to write a new TLS pointer. This write must be done via the userspace mapping, since aliasing caches can lead to expensive flushing when using kmap. Finally, this requires the vectors page to be mapped r/w for kernel and r/o for user, which has implications for things like put_user which must trigger CoW appropriately when targetting user pages. The upshot of all this is that a v6/v7 kernel makes use of domains to segregate kernel and user memory accesses. This has the nasty side-effect of making device mappings executable, which has been observed to cause subtle bugs on recent cores (e.g. Cortex-A15 performing a speculative instruction fetch from the GIC and acking an interrupt in the process). This patch solves this problem by removing the remaining domain support from ARMv6. A new memory type is added specifically for the vectors page which allows that page (and only that page) to be mapped as user r/o, kernel r/w. All other user r/o pages are mapped also as kernel r/o. Patch co-developed with Russell King. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7951/1: uaccess: use CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESSNicolas Pitre1-1/+1
Now that we select HAVE_EFFICIENT_UNALIGNED_ACCESS for ARMv6+ CPUs, replace the __LINUX_ARM_ARCH__ check in uaccess.h with the new symbol. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7949/1: feroceon: Log a FW_BUG if the L2 cache is turned on at bootJason Gunthorpe1-1/+3
Booting on feroceon CPUS requires the L2 cache to be turned off. With some kernel configurations (notably CONFIG_ARM_PATCH_PHYS_VIRT disabled) the kernel will boot even if the L2 is turned on. However there may be subtle breakage, and when PATCH_PHYS_VIRT is enabled it is very likely that booting with L2 will crash at early boot before any kernel diagnostic output. The diagnostic message is intended to discourage people from shipping bootloaders that leave the L2 turned on. The issue on feroceon is that the L2 is bypassed when the L1 caches are disabled. So the decompressor will place parts of the kernel image into the L2 and the early cache-off boot code in head.S will write to parts of the kernel image, bypassing the L2 and creating inconsistency. Tested on ARM Kirkwood. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7948/1: hw_breakpoint: Add ARMv8 supportChristopher Covington2-1/+3
Add the trivial support necessary to get hardware breakpoints working for GDB on ARMv8 simulators running in AArch32 mode. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7945/1: footbridge: Switch to sched_clock_register()Stephen Boyd1-2/+2
The 32 bit sched_clock interface supports 64 bits since 3.13-rc1. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-10ARM: 7940/1: add support for the Cortex-A12 processorJonathan Austin2-0/+12
The A12 behaves as the A7/A15 does with respect to setting the SMP bit, and doesn't require TLB ops broadcasting to be explicitly enabled like the A9 does. Note that as the ACTLR cannot (usually) be written from non-secure, it is the responsibility of the bootloader/firmware to set this bit per core - it is done here in Linux as last resort in case of bad firmware. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-02Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds27-43/+381
Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
2014-01-31ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMAOlof Johansson1-10/+2
TI_EDMA fell out of automatically selected options in the multi_v7 defconfig due to a select being removed from the davinci Kconfig entry. So we need to re-enable explicitly to not regress some platforms. The rest is just the result of running 'make multi_v7_defconfig + make savedefconfig' to remove entries that are no longer needed due to changed dependencies/selects or defaults. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: add mvebu driversOlof Johansson1-0/+10
Recent boot farm testing has highlighted some issues with mvebu and multiplatform kernels. Increase the test coverage so we can discover these issues earlier. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: bcm28155-ap: Fix Card Detection GPIOTim Kryger1-1/+3
The board schematic states that the "SD_CARD_DET_N gets pulled to GND when card is inserted" so the polarity has been updated to active low. Polarity is now specified with a GPIO define instead of a magic number. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixesOlof Johansson1-4/+4
Second Round of Renesas ARM Based SoC DT Fixes for v3.14 Correct i2c clock references for r8a7790 (R-Car H2) SoC The error was introduced in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is queued up for v3.14. * tag 'renesas-dt-fixes2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHYFabio Estevam1-0/+1
Select CONFIG_AT803X_PHY so that we can boot hummingboard via NFS. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not setGrygorii Strashko2-1/+1
Drop automatic selection of TI_EDMA from Keystone Kconfig file, as it produces build warning in case if CONFIG_DMADEVICES is not set: warning: (ARCH_KEYSTONE) selects TI_EDMA which has unmet direct dependencies (DMADEVICES && (ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE)) Instead enable TI EDMA support from defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-3/+50
mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: zynq: Add SDHCI nodesSoren Brinkmann4-0/+32
Add nodes for the Arasan SDHCI controller to Zynq dts files. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: hisi: don't select SMPRob Herring1-1/+0
SMP is a user configurable option, not a hardware feature and should not be selected. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: tegra: rebuild tegra_defconfig to add DEBUG_FSStephen Warren1-8/+3
DEBUG_FS used to be selected by COMMON_CLK_DEBUG, which was enabled by tegra_defconfig. However, this config option no longer exists, so no longer selects DEBUG_FS, and nothing else selects it either. So, "make tegra_defconfig" no longer enables DEBUG_FS in .config. Rebuild tegra_defconfig on top of next-20140424, while manually re-enabling DEBUG_FS. Reasons for removed entries are: - I2C_MUX: selected by MEDIA_SUBDRV_AUTOSELECT - DRM_PANEL: selected by DRM_TEGRA - NEW_LEDS: selected by many things; at least VT - LEDS_CLASS: selected by many things; at least VT - LEDS_TRIGGERS: selected by many things; at least VT - COMMON_CLK_DEBUG: no longer exists Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-01-31ARM: multi_v7: copy most options from tegra_defconfigStephen Warren1-11/+142
multi_v7_defconfig was missing a large number of options that were in tegra_defconfig. This patch adds them. The changes fall into the following categories: * Enable more Tegra SoC options/drivers. * Enable more drivers for Tegra boards. * Enable more options that are useful for running distros. The patch removes a few lines as well, simply because those options are now selected by something else, and "make savedefconfig" removes them. I verified that the options appear in .config after "make multi_v7_defconfig". Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: iop32x: fix power off handling for the EM7210 boardLinus Walleij1-5/+27
This board was missed when converting all the others to proper abstracted GPIO handling. Fix it up the right way by requesting and driving GPIO line 0 high through gpiolib to power off the machine. Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: integrator: restore static map on the CPLinus Walleij1-0/+6
Commit 78d1632183454dba46ca8295484a5e7603acdc18 deleted the static mappings of the core modules, but this static map is still needed on the Integrator/CP (not the Integrator/AP). Restore the static map on the Integrator/CP. Reported-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: msm_defconfig: Enable MSM clock driversStephen Boyd1-0/+4
This allows us to probe the clock controller devices and boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: dts: msm: Add clock controller nodes and hook into uartStephen Boyd3-0/+53
Add the necessary DT nodes to probe the clock controllers on MSM devices as well as hook up the uart nodes to the clock controllers. This should allow us to boot to a serial console on all DT enabled MSM platforms. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4+: move errata initialization to omap4_pm_init_earlyNishanth Menon4-5/+23
Move all OMAP4 PM errata initializations to centralized location in omap4_pm_init_early. This allows for users to utilize the erratas in various submodules as needed. Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidleStrashko, Grygorii4-5/+31
The same workaround as ff999b8a0983ee15668394ed49e38d3568fc6859 "ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC ..." need to be applied not only when system is booting, but when MPUSS hits OSWR state through CPUIdle too. Without this WA the same issue is reproduced now on boards PandaES and Tablet/Blaze with SOM OMAP4460 when CONFIG_CPU_IDLE is enabled. After MPUSS has enterred OSWR and waken up: - GIC distributor became disabled forever - scheduling is not performed any more Cc: Kevin Hilman <khilman@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds1-0/+7
Pull media updates from Mauro Carvalho Chehab: - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4) - a new dvb frontend for ds2103 chipset (m88ds2103) - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf) - new drivers for R-Car VSP1 - a new radio driver: radio-raremono - a new tuner driver for ts2022 chipset (m88ts2022) - the analog part of em28xx is now a separate module that only load/runs if the device is not a pure digital TV device - added a staging driver for bcm2048 radio devices - the omap 2 video driver (omap24xx) was moved to staging. This driver is for an old hardware and uses a deprecated Kernel internal API. If nobody cares enough to fix it, it would be removed on a couple Kernel releases - the sn9c102 driver was moved to staging. This driver was replaced by gspca, and disabled on some distros, as almost all devices are known to work properly with gspca. It should be removed from kernel on a couple Kernel releases - lots of driver fixes, improvements and cleanups * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits) [media] media: v4l2-dev: fix video device index assignment [media] rc-core: reuse device numbers [media] em28xx-cards: properly initialize the device bitmap [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c [media] Staging: media: Fix quoted string split across line in as102_fe.c [media] media: st-rc: Add reset support [media] m2m-deinterlace: fix allocated struct type [media] radio-usb-si4713: fix sparse non static symbol warnings [media] em28xx-audio: remove needless check before usb_free_coherent() [media] au0828: Fix sparse non static symbol warning Revert "[media] go7007-usb: only use go->dev after allocated" [media] em28xx-audio: provide an error code when URB submit fails [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0 [media] em28xx: make 'em28xx_ctrl_ops' static em28xx-alsa: Fix error patch for init/fini [media] em28xx-audio: flush work at .fini [media] drxk: remove the option to load firmware asynchronously [media] em28xx: adjust period size at runtime ...
2014-01-31Merge tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds2-30/+48
Pull Xen bugfixes from Konrad Rzeszutek Wilk: "Bug-fixes for the new features that were added during this cycle. There are also two fixes for long-standing issues for which we have a solution: grant-table operations extra work that was not needed causing performance issues and the self balloon code was too aggressive causing OOMs. Details: - Xen ARM couldn't use the new FIFO events - Xen ARM couldn't use the SWIOTLB if compiled as 32-bit with 64-bit PCIe devices. - Grant table were doing needless M2P operations. - Ratchet down the self-balloon code so it won't OOM. - Fix misplaced kfree in Xen PVH error code paths" * tag 'stable/for-linus-3.14-rc0-late-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Fix misplaced kfree from xlated_setup_gnttab_pages drivers: xen: deaggressive selfballoon driver xen/grant-table: Avoid m2p_override during mapping xen/gnttab: Use phys_addr_t to describe the grant frame base address xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t) arm/xen: Initialize event channels earlier
2014-01-30Merge tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-11/+207
Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late but were considered self-contained enough to still go in for v3.14. They are all device tree updtes this time around, and mainly for Broadcom SoCs" * tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: moxart: move fixed rate clock child node to board level dts clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses
2014-01-30xen/gnttab: Use phys_addr_t to describe the grant frame base addressJulien Grall1-3/+3
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT is enabled). We can't assume that the grant frame base address will always fits in an unsigned long. Use phys_addr_t instead of unsigned long as argument for gnttab_setup_auto_xlat_frames. Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com>
2014-01-30xen: swiotlb: handle sizeof(dma_addr_t) != sizeof(phys_addr_t)Ian Campbell1-0/+1
The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address. This can happen in practice on ARM where foreign pages can be above 4GB even though the local kernel does not have LPAE page tables enabled (which is totally reasonable if the guest does not itself have >4GB of RAM). In this case the kernel still maps the foreign pages at a phys addr below 4G (as it must) but the resulting DMA address (returned by the grant map operation) is much higher. This is analogous to a hardware device which has its view of RAM mapped up high for some reason. This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM systems with more than 4GB of RAM. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2014-01-30arm/xen: Initialize event channels earlierJulien Grall1-27/+44
Event channels driver needs to be initialized very early. Until now, Xen initialization was done after all CPUs was bring up. We can safely move the initialization to an early initcall. Also use a cpu notifier to: - Register the VCPU when the CPU is prepared - Enable event channel IRQ when the CPU is running Signed-off-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.