Age | Commit message (Collapse) | Author | Files | Lines |
|
Pull locking updates from Borislav Petkov:
"Lots of cleanups and preparation. Highlights:
- futex: Cleanup and remove runtime futex_cmpxchg detection
- rtmutex: Some fixes for the PREEMPT_RT locking infrastructure
- kcsan: Share owner_on_cpu() between mutex,rtmutex and rwsem and
annotate the racy owner->on_cpu access *once*.
- atomic64: Dead-Code-Elemination"
[ Description above by Peter Zijlstra ]
* tag 'locking_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: atomic64: Remove unusable atomic ops
futex: Fix additional regressions
locking: Allow to include asm/spinlock_types.h from linux/spinlock_types_raw.h
x86/mm: Include spinlock_t definition in pgtable.
locking: Mark racy reads of owner->on_cpu
locking: Make owner_on_cpu() into <linux/sched.h>
lockdep/selftests: Adapt ww-tests for PREEMPT_RT
lockdep/selftests: Skip the softirq related tests on PREEMPT_RT
lockdep/selftests: Unbalanced migrate_disable() & rcu_read_lock().
lockdep/selftests: Avoid using local_lock_{acquire|release}().
lockdep: Remove softirq accounting on PREEMPT_RT.
locking/rtmutex: Add rt_mutex_lock_nest_lock() and rt_mutex_lock_killable().
locking/rtmutex: Squash self-deadlock check for ww_rt_mutex.
locking: Remove rt_rwlock_is_contended().
sched: Trigger warning if ->migration_disabled counter underflows.
futex: Fix sparc32/m68k/nds32 build regression
futex: Remove futex_cmpxchg detection
futex: Ensure futex_atomic_cmpxchg_inatomic() is present
kernel/locking: Use a pointer in ww_mutex_trylock().
|
|
Pull ARM updates from Russell King:
- amba bus irq rework
- add kfence support
- support for Cortex M33 and M55 CPUs
- kbuild updates for decompressor
- let core code manage thread_info::cpu
- avoid unpredictable NOP encoding in decompressor
- reduce information printed in calltraces
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: reduce the information printed in call traces
ARM: 9168/1: Add support for Cortex-M55 processor
ARM: 9167/1: Add support for Cortex-M33 processor
ARM: 9166/1: Support KFENCE for ARM
ARM: 9165/1: mm: Provide is_write_fault()
ARM: 9164/1: mm: Provide set_memory_valid()
ARM: 9163/1: amba: Move of_amba_device_decode_irq() into amba_probe()
ARM: 9162/1: amba: Kill sysfs attribute file of irq
ARM: 9161/1: mm: mark private VM_FAULT_X defines as vm_fault_t
ARM: 9159/1: decompressor: Avoid UNPREDICTABLE NOP encoding
ARM: 9158/1: leave it to core code to manage thread_info::cpu
ARM: 9154/1: decompressor: do not copy source files while building
|
|
Pull spi updates from Mark Brown:
"This has mostly been a quiet release for the SPI subsystem, almost all
cleanups and fixes to existing drivers.
A couple of changes that stand out:
- Cleanups and support for version specific features in the
DesignWare controller.
- Removal of support for Netlogic devices from the XLP driver, the
platform had previously been removed by MIPS so the support
couldn't be used.
- Conversion of several DT bindings to YAML format"
* tag 'spi-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (53 commits)
spi: don't include ptp_clock_kernel.h in spi.h
spi: spi-meson-spifc: Add missing pm_runtime_disable() in meson_spifc_probe
spi: atmel: Fix typo
spi: dt-bindings: mediatek,spi-mtk-nor: Fix example 'interrupts' property
spi: qcom: geni: handle timeout for gpi mode
spi: qcom: geni: set the error code for gpi transfer
spi: spi-mux: Add reference to spi-peripheral-props.yaml schema
spi: ar934x: fix transfer size
spi: pxa2xx: Propagate firmware node
spi: dw: Propagate firmware node
spi: dln2: Propagate firmware node
spi: ar934x: fix transfer and word delays
spi: uniphier: Fix a bug that doesn't point to private data correctly
spi: spi-mtk-nor: add new clock name 'axi' for spi nor
spi: atmel,quadspi: Define sama7g5 QSPI
spi: atmel,quadspi: Convert to json-schema
spi: Fix incorrect cs_setup delay handling
dt-bindings: mtd: spi-nor: Add a reference to spi-peripheral-props.yaml
spi: dt-bindings: cdns,qspi-nor: Move peripheral-specific properties out
spi: dt-bindings: add schema listing peripheral-specific properties
...
|
|
Pull power management updates from Rafael Wysocki:
"The most signigicant change here is the addition of a new cpufreq
'P-state' driver for AMD processors as a better replacement for the
venerable acpi-cpufreq driver.
There are also other cpufreq updates (in the core, intel_pstate, ARM
drivers), PM core updates (mostly related to adding new macros for
declaring PM operations which should make the lives of driver
developers somewhat easier), and a bunch of assorted fixes and
cleanups.
Summary:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas
Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector
Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
- Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman).
- Fix two comments in cpuidle code (Jason Wang, Yang Li).
- Allow model-specific normal EPB value to be used in the intel_epb
sysfs attribute handling code (Srinivas Pandruvada).
- Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki).
- Add safety net to supplier device release in the runtime PM core
code (Rafael Wysocki).
- Capture device status before disabling runtime PM for it (Rafael
Wysocki).
- Add new macros for declaring PM operations to allow drivers to
avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and
update some drivers to use these macros (Paul Cercueil).
- Allow ACPI hardware signature to be honoured during restore from
hibernation (David Woodhouse).
- Update outdated operating performance points (OPP) documentation
(Tang Yizhou).
- Reduce log severity for informative message regarding frequency
transition failures in devfreq (Tzung-Bi Shih).
- Add DRAM frequency controller devfreq driver for Allwinner sunXi
SoCs (Samuel Holland).
- Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd
Bergmann).
- Add support for new layout of Psys PowerLimit Register on SPR to
the Intel RAPL power capping driver (Zhang Rui).
- Fix typo in a comment in idle_inject.c (Jason Wang).
- Remove unused function definition from the DTPM (Dynamit Thermal
Power Management) power capping framework (Daniel Lezcano).
- Reduce DTPM trace verbosity (Daniel Lezcano)"
* tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
cpuidle: use default_groups in kobj_type
x86: intel_epb: Allow model specific normal EPB value
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
...
|
|
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
|
|
Pull random number generator updates from Jason Donenfeld:
"These a bit more numerous than usual for the RNG, due to folks
resubmitting patches that had been pending prior and generally renewed
interest.
There are a few categories of patches in here:
1) Dominik Brodowski and I traded a series back and forth for a some
weeks that fixed numerous issues related to seeds being provided
at extremely early boot by the firmware, before other parts of the
kernel or of the RNG have been initialized, both fixing some
crashes and addressing correctness around early boot randomness.
One of these is marked for stable.
2) I replaced the RNG's usage of SHA-1 with BLAKE2s in the entropy
extractor, and made the construction a bit safer and more
standard. This was sort of a long overdue low hanging fruit, as we
were supposed to have phased out SHA-1 usage quite some time ago
(even if all we needed here was non-invertibility). Along the way
it also made extraction 131% faster. This required a bit of
Kconfig and symbol plumbing to make things work well with the
crypto libraries, which is one of the reasons why I'm sending you
this pull early in the cycle.
3) I got rid of a truly superfluous call to RDRAND in the hot path,
which resulted in a whopping 370% increase in performance.
4) Sebastian Andrzej Siewior sent some patches regarding PREEMPT_RT,
the full series of which wasn't ready yet, but the first two
preparatory cleanups were good on their own. One of them touches
files in kernel/irq/, which is the other reason why I'm sending
you this pull early in the cycle.
5) Other assorted correctness fixes from Eric Biggers, Jann Horn,
Mark Brown, Dominik Brodowski, and myself"
* 'random-5.17-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: don't reset crng_init_cnt on urandom_read()
random: avoid superfluous call to RDRAND in CRNG extraction
random: early initialization of ChaCha constants
random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
random: harmonize "crng init done" messages
random: mix bootloader randomness into pool
random: do not throw away excess input to crng_fast_load
random: do not re-init if crng_reseed completes before primary init
random: fix crash on multiple early calls to add_bootloader_randomness()
random: do not sign extend bytes for rotation when mixing
random: use BLAKE2s instead of SHA1 in extraction
lib/crypto: blake2s: include as built-in
random: fix data race on crng init time
random: fix data race on crng_node_pool
irq: remove unused flags argument from __handle_irq_event_percpu()
random: remove unused irq_flags argument from add_interrupt_randomness()
random: document add_hwgenerator_randomness() with other input functions
MAINTAINERS: add git tree for random.c
|
|
Pull thread_info flag accessor helper updates from Borislav Petkov:
"Add a set of thread_info.flags accessors which snapshot it before
accesing it in order to prevent any potential data races, and convert
all users to those new accessors"
* tag 'core_entry_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
powerpc: Snapshot thread flags
powerpc: Avoid discarding flags in system_call_exception()
openrisc: Snapshot thread flags
microblaze: Snapshot thread flags
arm64: Snapshot thread flags
ARM: Snapshot thread flags
alpha: Snapshot thread flags
sched: Snapshot thread flags
entry: Snapshot thread flags
x86: Snapshot thread flags
thread_info: Add helpers to snapshot thread flags
|
|
Merge cpufreq updates for 5.17-rc1:
- Add new P-state driver for AMD processors (Huang Rui).
- Fix initialization of min and max frequency QoS requests in the
cpufreq core (Rafael Wysocki).
- Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada).
- Make intel_pstate update cpuinfo.max_freq when notified of HWP
capabilities changes and drop a redundant function call from that
driver (Rafael Wysocki).
- Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel,
Stephen Boyd, Vladimir Zapolskiy).
- Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan).
- Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz
Luba).
- Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman).
* pm-cpufreq: (32 commits)
x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error
cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State
cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment
MAINTAINERS: Add AMD P-State driver maintainer entry
Documentation: amd-pstate: Add AMD P-State driver introduction
cpufreq: amd-pstate: Add AMD P-State performance attributes
cpufreq: amd-pstate: Add AMD P-State frequencies attributes
cpufreq: amd-pstate: Add boost mode support for AMD P-State
cpufreq: amd-pstate: Add trace for AMD P-State module
cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution
cpufreq: amd-pstate: Add fast switch function for AMD P-State
cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors
ACPI: CPPC: Add CPPC enable register function
ACPI: CPPC: Check present CPUs for determining _CPC is valid
ACPI: CPPC: Implement support for SystemIO registers
x86/msr: Add AMD CPPC MSR definitions
x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag
cpufreq: use default_groups in kobj_type
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: intel_pstate: Update cpuinfo.max_freq on HWP_CAP changes
...
|
|
Pull asm-generic cleanups from Arnd Bergmann:
"A few minor cleanups for cross-architecture code: Alexandre Ghiti
deals with removing some leftovers from drivers and features that have
been removed, and Wasin Thonkaew has a cosmetic change"
* tag 'asm-generic-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/error-injection.h: fix a spelling mistake, and a coding style issue
arch: Remove leftovers from prism54 wireless driver
arch: Remove leftovers from mandatory file locking
Documentation, arch: Remove leftovers from CIFS_WEAK_PW_HASH
Documentation, arch: Remove leftovers from raw device
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
|
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
|
|
Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual changes to enable newly added driver by default,
and to do some housekeeping around changing Kconfig symbols"
* tag 'defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Enable Samsung I2C driver
ARM: configs: at91: Enable crypto software implementations
ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
ARM: config: multi v7: Enable display drivers used by Tegra devices
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
ARM: configs: gemini: Activate crypto driver
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: Enable R-Car S4-8
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
|
|
Pull ARM SoC updates from Arnd Bergmann:
"These are all minor bug fixes and cleanups to code in arch/arm and
arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
MAINTAINERS file, and removing some dead code"
* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: exynos: Enable Exynos Multi-Core Timer driver
ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
ARM: s3c: add one more "fallthrough" statement in Jive
ARM: s3c: include header for prototype of s3c2410_modify_misccr
ARM: shmobile: rcar-gen2: Add missing of_node_put()
|
|
Pull ARM SoC fix from Olof Johansson:
"One more fix for 5.16
I had missed one patch when I sent up what I thought was the last
batch of fixes for this release. This one fixes issues on the
Raspberry Pi platforms due to gpio init changes this release, so
hopefully we can get it merged before final release is cut"
* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: gpio-ranges property is now required
|
|
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 2ab73c6d8323 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org
Fixes: 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull ARM SoC fixes from Olof Johansson:
"A few more fixes have come in, nothing overly severe but would be good
to get in by final release:
- More specific compatible fields on the qspi controller for socfpga,
to enable quirks in the driver
- A runtime PM fix for Renesas to fix mismatched reference counts on
errors"
* tag 'soc-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
reset: renesas: Fix Runtime PM usage
|
|
In preparation for using blake2s in the RNG, we change the way that it
is wired-in to the build system. Instead of using ifdefs to select the
right symbol, we use weak symbols. And because ARM doesn't need the
generic implementation, we make the generic one default only if an arch
library doesn't need it already, and then have arch libraries that do
need it opt-in. So that the arch libraries can remain tristate rather
than bool, we then split the shash part from the glue code.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable")
commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar:
"- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd,
and Vladimir Zapolskiy).
- Fixes double devm_remap for mediatek driver (Hector Yuan).
- Introduces thermal pressure helpers (Lukasz Luba)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: qcom-hw: Use optional irq API
cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts
cpufreq: qcom-hw: Fix probable nested interrupt handling
cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name
arch_topology: Remove unused topology_set_thermal_pressure() and related
cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
thermal: cpufreq_cooling: Use new thermal pressure update function
arch_topology: Introduce thermal pressure update function
|
|
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
|
|
Because of commit 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling"),
which does a write to the CQSPI_REG_WR_COMPLETION_CTRL register
regardless of any condition. Well, the Cadence QuadSPI controller on
Intel's SoCFPGA platforms does not implement the
CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register
results in a crash!
So starting with v5.16, I introduced the patch
98d948eb833 ("spi: cadence-quadspi: fix write completion support"),
which adds the dts compatible "intel,socfpga-qspi" that is specific for
versions that doesn't have the CQSPI_REG_WR_COMPLETION_CTRL register implemented.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v3: revert back to "intel,socfpga-qspi"
v2: use both "cdns,qspi-nor" and "cdns,qspi-nor-0010"
|
|
Pull ARM fixes from Russell King:
- fix nommu after getting rid of mini-stack for ARMv7
- fix Thumb2 bug in iWMMXt exception handling
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
|
|
This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
a build regression:
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ASPEED device tree updates for 5.17
- New machines:
* TYAN S8036 AST2500 BMC
* Facebook Bletchley AST2600 BMC
* Yadro VEGMAN series of AST2500 BMC for x86 servers
- LPC clock additions, to fix long standing missed irq on boot issue
- Secure boot controller description for AST2600
- Alternate chip flash layout, used by Bytedance's G220A
- Various additions to Rainier, Everest, S7106
* tag 'aspeed-5.17-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC
dt-bindings: vendor-prefixes: add YADRO
ARM: dts: aspeed: mtjade: Add uefi partition
ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices
ARM: dts: aspeed: tyan-s7106: Update nct7802 config
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This pull request contains Broadcom ARM-based SocS Device Tree changes
for v5.17, please pull the following:
- Matthew enables the QCA8337 switch of the Merak MX65 to have the
appropriate PLL properties for it to be enabled and set the SGMII
transmit clock to falling edge.
- Arinc removes unnecessary properties of the GPIO keyboard Device Tree
node, adds the external Realtek RTM8365MB switch on the Ausus RT-AC88U,
including fixing the RX delay on the Realtek switch side and enabling
flow control on the Broadcom internal switch port connecting to the
Realtek switch.
- Christian updates the Meraki MR32 Device Tree node to make use of the
hardware I2C controller instead of bitbanging
- Rafal updates the BCM5310X Device Tree files to have the CRU node not
generate warnings, updates the USB 2.0 PHY to use the non-deprecated
binding
- Uwe adds GPIO offset to the gpio names properties for readability
- Stefan updates the BCM2835 VCHIQ Device Tree binding to YAML
- Florian fixes the iProc PCIe Device Tree nodes in Cygnus, Hurricane 2
and Northstar Plus to be compliant with the iProc PCIe YAML binding
(merged in RobH's tree) as well as the SATA controller node unit name.
* tag 'arm-soc/for-5.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: correct RX delay and enable flow control on Asus RT-AC88U
ARM: dts: NSP: Rename SATA unit name
ARM: dts: NSP: Fixed iProc PCIe MSI sub-node
ARM: dts: HR2: Fixed iProc PCIe MSI sub-node
ARM: dts: Cygnus: Update PCIe PHY node unit name(s)
ARM: dts: Cygnus: Fixed iProc PCIe controller properties
dt-bindings: soc: bcm: Convert brcm,bcm2835-vchiq to json-schema
ARM: dts: bcm2711-rpi-4-b: Add gpio offsets to line name array
ARM: dts: BCM5301X: use non-deprecated USB 2.0 PHY binding
ARM: dts: BCM5301X: update CRU block description
ARM: BCM53016: MR32: convert to Broadcom iProc I2C Driver
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
ARM: dts: BCM5301X: remove unnecessary address & size cells from Asus RT-AC88U
ARM: dts: NSP: MX65: add qca8k falling-edge, PLL properties
|
|
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
If LPC KCS driver is registered ahead of lpc-ctrl module, LPC KCS
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds 'clocks' property setting into LPC
KCS node as one of required properties to enable the LCLK by the
LPC KCS driver.
Note: dtbs should be re-compiled after applying this change since
it's adding a new required property otherwise the driver will not
be probed correctly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211108190200.290957-5-jae.hyun.yoo@intel.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
If LPC BT driver is registered ahead of lpc-ctrl module, LPC BT
hardware block will be enabled without heart beating of LCLK until
lpc-ctrl enables the LCLK. This issue causes improper handling on
host interrupts when the host sends interrupts in that time frame.
Then kernel eventually forcibly disables the interrupt with
dumping stack and printing a 'nobody cared this irq' message out.
To prevent this issue, all LPC sub drivers should enable LCLK
individually so this patch adds 'clocks' property setting into LPC
IBT node as one of required properties to enable the LCLK by the
LPC IBT driver.
Note: dtbs should be re-compiled after applying this change since
it's adding a new required property otherwise the driver will not
be probed correctly.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211108190200.290957-2-jae.hyun.yoo@intel.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the Nuvoton NPCT75X, a TIS I2C TPM.
Modified Eddie's change to include the general compatible string, and
combine the rainier and everest patches.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211208191758.20517-8-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Ensure both controllers are enabled on, and add GPIO hog for USB power
control to set the USB power to always on.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211208170641.13322-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The TYAN S8036 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211130180110.2217042-1-aaelhaj@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Configure the vuart in such a way that it does not inhibit the SuperIO's
UART from functioning correctly. This allows the same DTS to be used for
both configurations with SuperIO and VUART (depending on the BIOS
build). The decision on whether to actually enable VUART can then be
made at runtime.
This change also enables the new uart_routing driver for the SuperIO
case.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20211130184855.1779353-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Initial introduction of Facebook Bletchley equipped with
Aspeed 2600 BMC SoC.
Signed-off-by: Howard Chiu <howard.chiu@quantatw.com>
Link: https://lore.kernel.org/r/20211207094923.422422-1-howard.chiu@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable the secondary flash of the g220a's BMC and the wdt2.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Link: https://lore.kernel.org/r/20211210093623.2140640-1-yulei.sh@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add openbmc-flash-layout-64-alt.dtsi to describe the partitions of the
secondary flash for OpenBMC's 64M static layout.
The layout is the same as openbmc-flash-layout-64.dtsi and the labels
are prepended with "alt-" for the partitions.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20211210093443.2140557-1-yulei.sh@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The ast2600 has a secure boot controller.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20211117035106.321454-3-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
ARM: tegra: Changes for v5.17-rc1
A large part of this is cleanups to existing device trees in order to
improve validation of the device trees using the dt-schema tooling.
This also contains a set of new device trees for various boards that
have been contributed by community members as well as fixes to existing
devices.
* tag 'tegra-for-5.17-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (55 commits)
ARM: tegra: Add host1x hotflush reset on Tegra124
ARM: tegra: Add memory client hotflush resets on Tegra114
ARM: tegra: Add back gpio-ranges properties
ARM: tegra: paz00: Enable S/PDIF and HDMI audio
ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
ARM: tegra: Add S/PDIF node to Tegra20 device-tree
ARM: tegra20/30: Disable unused host1x hardware
ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x
ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
ARM: tegra: Add 500 MHz entry to Tegra30 memory OPP table
ARM: tegra: Enable video decoder on Tegra114
ARM: tegra: nexus7: Use common LVDS display device-tree
ARM: tegra: Add CPU thermal zones to Nyan device-tree
ARM: tegra: Enable CPU DFLL on Nyan
ARM: tegra: Enable HDMI CEC on Nyan
ARM: tegra: Add usb-role-switch property to USB OTG ports
ARM: tegra: Add device-tree for 1080p version of Nyan Big
...
Link: https://lore.kernel.org/r/20211217162253.1801077-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung mach/soc changes for v5.17
1. Minor fixes for S3C platforms.
2. Remove HAVE_S3C2410_I2C Kconfig symbol - not really useful.
* tag 'samsung-soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
ARM: s3c: add one more "fallthrough" statement in Jive
ARM: s3c: include header for prototype of s3c2410_modify_misccr
Link: https://lore.kernel.org/r/20211220115530.30961-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX SoC update for 5.17:
- A couple of cleanups from Lukas Bulwahn to remove left-over from
i.MX{27,31,35} board file removal, and rename DEBUG_IMX21_IMX27_UART
to DEBUG_IMX27_UART.
* tag 'imx-soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
Link: https://lore.kernel.org/r/20211218071427.26745-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX defconfig update for 5.17:
- Enable pinctrl and clock drivers for i.MX8 ULP SoC.
- A couple of patches from Adam Ford to enable Camera driver support
for Beacon EmbeddedWorks i.MX8MM development kit.
- Enable drivers for devices found on TQMa8MxML-MBa8Mx board.
- Enable RTC_DRV_RV3029C2 driver support for DHCOM devices.
* tag 'imx-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2
arm64: defconfig: enable drivers for booting i.MX8ULP
arm64: defconfig: enable drivers for TQ TQMa8MxML-MBa8Mx
arm64: defconfig: Enable OV5640
arm64: defconfig: Enable VIDEO_IMX_MEDIA
Link: https://lore.kernel.org/r/20211218071427.26745-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AT91 defconfig #1 for 5.17:
- Sama7: addition of QSPI SPI-NOR and the QSPI controller for this
product
- Addition of the crypto algorithms that are fallbacks for HW engines
* tag 'at91-defconfig-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: Enable crypto software implementations
ARM: configs: at91: sama7: Enable SPI NOR and QSPI controller
Link: https://lore.kernel.org/r/20211217165850.29694-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ARM: tegra: Default configuration changes for v5.17-rc1
These patches enable various drivers used by new and existing boards in
both the Tegra default configuration and the multi-v7 configuration.
* tag 'tegra-for-5.17-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: config: multi v7: Enable display drivers used by Tegra devices
ARM: tegra_defconfig: Enable drivers wanted by Acer Chromebooks and ASUS tablets
Link: https://lore.kernel.org/r/20211217162253.1801077-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung DTS ARM changes for v5.17
1. Fix Bluetooth GPIO on GT-I9100.
2. Minor improvements and dtschema fixes.
* tag 'samsung-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
ARM: dts: exynos: Use interrupt for BCM4330 host wakeup in I9100
ARM: dts: exynos: Fix BCM4330 Bluetooth reset polarity in I9100
Link: https://lore.kernel.org/r/20211220115530.30961-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- add device tree for Fairphone 1 (mt6589)
* tag 'v5.16-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm: dts: mt6589: Add device tree for Fairphone 1
Link: https://lore.kernel.org/r/9ea1efa3-492b-7204-58f8-5253cd5b05f9@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
* tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
ARM: dts: imx7d-remarkable2: add wacom digitizer device
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckih2"
...
Link: https://lore.kernel.org/r/20211218071427.26745-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
"spidev" is not a real device, but a Linux implementation detail. It has
never been documented either. The kernel has WARNed on the use of it for
over 6 years. Time to remove its usage from the tree.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211217221232.3664417-1-robh@kernel.org'
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
mvebu dt for 5.17 (part 1)
Add generic compatible to UART nodes on Armada 38x
* tag 'mvebu-dt-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada-38x: Add generic compatible to UART nodes
Link: https://lore.kernel.org/r/875yrnm8uq.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AT91 SoC #1 for 5.17:
- one low priority fix about of_node_put() missing in PM code
* tag 'at91-soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: Add of_node_put() before goto
Link: https://lore.kernel.org/r/20211217164134.28566-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
i.MX fixes for 5.16, round 3:
- Fix imx6qdl-wandboard Ethernet support by adding 'qca,clk-out-frequency'
property.
- Fix scl-gpios property typo in LX2160A device tree.
* tag 'imx-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: lx2160a: fix scl-gpios property name
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
Link: https://lore.kernel.org/r/20211218052003.GA25102@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|