aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2006-03-25Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-19/+59
* master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion [SERIAL] amba-pl010: Remove accessor macros [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI) [SERIAL] icom: select FW_LOADER
2006-03-25Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds29-80/+363
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3030/2: fix permission check in the obscur cmpxchg syscall [ARM] nommu: rename compressed/head.S symbols to a new style [ARM] select TLS_REG_EMUL and NEEDS_SYSCALL_FOR_CMPXCHG [ARM] nommu: Move hardware page table definitions to pgtable-hwdef.h [ARM] Move read of processor ID out of lookup_processor_type() [ARM] Fix typo in tlbflush.h [ARM] noMMU: removes TLB codes in nommu mode [ARM] noMMU: block sys_fork in nommu mode [ARM] 3399/1: Fix link problem when CONFIG_PRINTK is disabled [ARM] 3398/1: Fix the VFP registers loading/storing base address [ARM] 3397/1: AT91RM9200 Header update [ARM] 3385/1: Battery support for sharp zaurus sl-5500 (collie) [ARM] SMP: don't set cpu_*_map in smp_prepare_boot_cpu include/linux/clk.h is betraying its ARM origins [ARM] Move enable_irq and disable_irq to assembler.h [ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead of 0/1
2006-03-25[ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversionLennert Buytenhek1-19/+59
Patch from Lennert Buytenhek Add a PLAT8250_DEV_PLATFORM2, and convert the two ixdp2x01 CPLD serial ports to use platform serial devices with ids PLAT8250_DEV_PLATFORM[12]. (The on-chip xscale UART is PLAT8250_DEV_PLATFORM, id #0.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] 3030/2: fix permission check in the obscur cmpxchg syscallNicolas Pitre1-1/+1
Patch from Nicolas Pitre Quoting RMK: |pte_write() just says that the page _may_ be writable. It doesn't say |that the MMU is programmed to allow writes. If pte_dirty() doesn't |return true, that means that the page is _not_ writable from userspace. |If you write to it from kernel mode (without using put_user) you'll |bypass the MMU read-only protection and may end up writing to a page |owned by two separate processes. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25Merge nommu treeRussell King20-51/+78
Fix merge conflict in arch/arm/mm/proc-xscale.S Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] 3399/1: Fix link problem when CONFIG_PRINTK is disabledMalcolm Parsons1-1/+1
Patch from Malcolm Parsons Printking a backtrace requires printk, so disable backtrace code when printk is disabled. Without this patch, a kernel with CONFIG_PRINTK disabled does not link: arch/arm/lib/lib.a(backtrace.o): In function `c_backtrace': arch/arm/lib/backtrace.S:(.text+0x108): undefined reference to `printk' arch/arm/lib/backtrace.S:(.text+0x11c): undefined reference to `printk' arch/arm/lib/lib.a(backtrace.o):(.fixup+0x8): undefined reference to `printk' Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] 3398/1: Fix the VFP registers loading/storing base addressCatalin Marinas1-3/+1
Patch from Catalin Marinas The current VFP code corrupts the VFP registers (including the control ones) if more than one floating point application is executed at the same time. This patch fixes the updating of the load/store base addresses for the VFP registers. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] 3385/1: Battery support for sharp zaurus sl-5500 (collie)Pavel Machek1-0/+278
Patch from Pavel Machek This adds support for battery reading on collie. Collie slowly charges battery even with charging disabled, so I did not yet enable fast charge. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25[ARM] SMP: don't set cpu_*_map in smp_prepare_boot_cpuRussell King1-3/+0
The recent addition of boot_cpu_init() implements the initialisation of the online, present and possible cpu maps for the boot CPU, so there is no reason to duplicate this in the architecture smp_prepare_boot_cpu() hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds3-3/+12
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits) kbuild: remove obsoleted scripts/reference_* files kbuild: fix make help & make *pkg kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h Kconfig: remove the CONFIG_CC_ALIGN_* options kbuild: add -fverbose-asm to i386 Makefile kbuild: clean-up genksyms kbuild: Lindent genksyms.c kbuild: fix genksyms build error kbuild: in makefile.txt note that Makefile is preferred name for kbuild files kbuild: replace PHONY with FORCE kbuild: Fix bug in crc symbol generating of kernel and modules kbuild: change kbuild to not rely on incorrect GNU make behavior kbuild: when warning symbols exported twice now tell user this is the problem kbuild: fix make dir/file.xx when asm symlink is missing kbuild: in the section mismatch check try harder to find symbols kbuild: fix section mismatch check for unwind on IA64 kbuild: kill false positives from section mismatch warnings for powerpc kbuild: kill trailing whitespace in modpost & friends kbuild: small update of allnoconfig description kbuild: make namespace.pl CROSS_COMPILE happy ... Trivial conflict in arch/ppc/boot/Makefile manually fixed up
2006-03-25[PATCH] collie: fix missing pcmcia bitsPavel Machek1-0/+30
This adds missing bits of collie (sharp sl-5500) PCMCIA support and MFD support. Signed-off-by: Pavel Machek <pavel@suse.cz> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[PATCH] s/;;/;/gAlexey Dobriyan2-4/+4
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24[ARM] nommu: rename compressed/head.S symbols to a new styleHyok S. Choi1-41/+41
This patch renames symbols to a new style to prepare mpu support code merging. e.g. __armv4_cache_on --> __armv4_mmu_cache_on Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-23[ARM] Move enable_irq and disable_irq to assembler.hRussell King2-18/+1
5d25ac038a317d454a4321cba955f756400835a5 broke VFP builds due to enable_irq not being defined as an assembly macro. Move it to assembler.h so everyone can use it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-23[ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead of 0/1Lennert Buytenhek2-3/+3
Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds81-3392/+2171
* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) [ARM] 3389/1: typo and grammar fix [ARM] 3386/1: AT91RM9200 Clock update [ARM] 3384/1: AT91RM9200: Timer [ARM] 3382/1: ixp2000: unify defconfigs [ARM] 3381/1: ixp2000: fix slowport write timing control register fields [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check [ARM] 3379/1: ixp2000: use generic 8250 debug macros [ARM] 3378/1: ixp2000: fix gpio interrupt handling [ARM] Quieten spurious IRQ detection [ARM] Use kcalloc to allocate counter_config array rather than kmalloc [ARM] Oprofile: dynamically allocate counter_config [ARM] Oprofile: Convert semaphore to mutex [ARM] 3376/2: S3C2410 - update defconfig [ARM] 3375/1: S3C2440 - fix osiris machine build [ARM] 3374/1: ep93xx: gpio interrupt support [ARM] 3361/1: S3C24XX - add USB bus clock source [ARM] 3360/1: S3C2440 - add set rate methods and camera clock [ARM] 3359/1: S3C24XX - add support for clk_set_rate [ARM] Convert kmalloc+memset to kzalloc [ARM] 3373/1: move uengine loader to arch/arm/common ...
2006-03-22[ARM] 3389/1: typo and grammar fixErik Hovland1-1/+1
Patch from Erik Hovland I found a typo and what seems to be a run-on sentence in arch/arm/common/dmabounce.c This patch corrects both. Signed-off-by: Erik Hovland <erik@hovland.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3386/1: AT91RM9200 Clock updateAndrew Victor1-12/+73
Patch from Andrew Victor This patch includes a few changes to the clock support on the AT91RM9200. 1. Added definitions for Ethernet, MMC, TWI, USARTs, and SPI peripheral clocks. 2. Replaced some hard-coded hex values with the text definitions in at91rm9200_sys.h. 3. If the USB96M bit is set for PLLB, then the rate of PLLB is not affected but only the USB Host/Device clocks which are derived from it. Issue reported by Sergei Sharonov. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3384/1: AT91RM9200: TimerAndrew Victor1-2/+2
Patch from Andrew Victor If the timer interrupt is ever significantly delayed (or after the system was suspended), the system could spin incrementing the time for too long. The fix is to replace the "do {} while" with a "while {}". Orignal patch by Savin Zlobec and Peter Menzebach. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3382/1: ixp2000: unify defconfigsLennert Buytenhek5-3916/+46
Patch from Lennert Buytenhek Unify the five existing ixp2000 defconfigs into one defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22[ARM] 3378/1: ixp2000: fix gpio interrupt handlingLennert Buytenhek1-12/+1
Patch from Lennert Buytenhek ixp2000 used to initially mark GPIO interrupts as invalid, and not mark them valid until set_irq_type() was called, but this doesn't work if you want to use request_irq() with the SA_TRIGGER_* flags. So, just mark the GPIO interrupts valid from the beginning. We configure GPIOs as inputs when set_irq_type() is called anyway, so this shouldn't be a problem. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (124 commits) [ALSA] version 1.0.11rc4 [PATCH] Intruduce DMA_28BIT_MASK [ALSA] hda-codec - Add support for ASUS P4GPL-X [ALSA] hda-codec - Add support for HP nx9420 laptop [ALSA] Fix memory leaks in error path of control.c [ALSA] AMD Au1x00: AC'97 controller is memory mapped [ALSA] AMD Au1x00: fix DMA init/cleanup [ALSA] hda-codec - Fix generic auto-configurator [ALSA] hda-codec - Fix BIOS auto-configuration [ALSA] Fixes typos in Audiophile-USB.txt [ALSA] ice1712 - typo fixes for dxr_enable module option [ALSA] AMD Au1x00: make driver build after cleanup [ALSA] ice1712 - Fix wrong value types for enum items [ALSA] fix resource leak in usbmixer [ALSA] Fix gus_pcm dereference before NULL [ALSA] Fix seq_clientmgr dereferences before NULL check [ALSA] hda-codec - Fix for Samsung R65 and ASUS A6J [ALSA] hda-codec - Add support for VAIO FE550G and SZ110 [ALSA] usb-audio: add Maya44 mixer control names [ALSA] usb-audio: add Casio PL-40R support ...
2006-03-22[PATCH] remove set_page_count() outside mm/Nick Piggin1-1/+1
set_page_count usage outside mm/ is limited to setting the refcount to 1. Remove set_page_count from outside mm/, and replace those users with init_page_count() and set_page_refcounted(). This allows more debug checking, and tighter control on how code is allowed to play around with page->_count. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[PATCH] mm: split highorder pagesNick Piggin1-2/+2
Have an explicit mm call to split higher order pages into individual pages. Should help to avoid bugs and be more explicit about the code's intention. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22[ARM] Quieten spurious IRQ detectionRussell King1-3/+8
Only issue a "nobody cared" warning after 99900 spurious interrupts. This avoids the occasional spurious interrupt causing warnings, as per x86. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-22Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJaroslav Kysela3-26/+6
2006-03-22[ALSA] Fix snd_xxx_t typedefsTakashi Iwai1-2/+2
Modules: PXA Mainstone driver,CX88 driver,SAA7134 driver Replace snd_xxx_t typedefs with explicit structs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-21[ARM] Use kcalloc to allocate counter_config array rather than kmallocRussell King1-1/+1
We need this to be zero initialised. Since this is an array, use kcalloc rather than kzalloc or kmalloc. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Oprofile: dynamically allocate counter_configRussell King2-3/+10
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Oprofile: Convert semaphore to mutexRussell King1-13/+10
op_arm_sem is being used as a mutex, so convert it to use real mutexes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3376/2: S3C2410 - update defconfigBen Dooks1-6/+141
Patch from Ben Dooks Add Simtec Osiris to the default build, and enable the USB-OHCI section by default. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3375/1: S3C2440 - fix osiris machine buildBen Dooks1-3/+7
Patch from Ben Dooks Fix the build of arch/arm/mach-s3c2410/mach-osiris.c and fix the warnings from sparse. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3374/1: ep93xx: gpio interrupt supportLennert Buytenhek1-0/+133
Patch from Lennert Buytenhek Add GPIO interrupt support for the first 16 GPIO lines (port A and B.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3361/1: S3C24XX - add USB bus clock sourceBen Dooks3-2/+37
Patch from Ben Dooks Add USB bus clock definition for 48MHz fed to OHCI and gadget cores Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3360/1: S3C2440 - add set rate methods and camera clockBen Dooks1-0/+51
Patch from Ben Dooks Add set_rate methods for the extra clocks on the S3C2440 and add the camera UPLL clock source Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3359/1: S3C24XX - add support for clk_set_rateBen Dooks2-1/+15
Patch from Ben Dooks Add support for clk_set_rate and clk_round_rate to the s3c2410 clock implementation Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Convert kmalloc+memset to kzallocRussell King14-48/+18
Convert all uses of kmalloc followed by memset to use kzalloc instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3373/1: move uengine loader to arch/arm/commonLennert Buytenhek3-2/+3
Patch from Lennert Buytenhek Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common so that ixp23xx can use it too. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3372/1: ep93xx: add defconfigLennert Buytenhek1-0/+1087
Patch from Lennert Buytenhek Add ep93xx defconfig. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3371/1: ep93xx: gpio supportLennert Buytenhek1-0/+68
Patch from Lennert Buytenhek Add support for setting the direction of and getting/setting the value of the 64 GPIO lines. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3369/1: ep93xx: add core cirrus ep93xx supportLennert Buytenhek9-1/+375
Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3368/1: ixp4xx: set gpio direction in ixp4xx_config_irqAlessandro Zummo1-1/+4
Patch from Alessandro Zummo ixp4xx_config_irq did not configure the gpio line as an input. As an added bonus, the irq2gpio array has been converted from int to char. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3346/1: Fix udelay() for HZ values different from 100Peter Teichmann1-8/+12
Patch from Peter Teichmann Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver. This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution. Signed-off-by: Peter Teichmann Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3334/1: Add support for IXDP28x5 platformsDeepak Saxena2-4/+25
Patch from Deepak Saxena This patch adds support for Intel's IXDP28x5 platform. This is just and IXDP2801 with a new CPU rev but the bootloader has been updated to reflect a new machine ID so we just build support for it by default when we build IXDP2801. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3333/1: S3C2XX - add dclk and clkout clock supportBen Dooks1-1/+93
Patch from Ben Dooks Add enable and set_parent calls for the dclk and clkout clocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3331/1: S3C24XX - add clk_set_parent() to clock codeBen Dooks2-0/+20
Patch from Ben Dooks Add clk_set_parent() call to clock code Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3330/1: S3C24XX - move UPLL to main clockBen Dooks2-19/+38
Patch from Ben Dooks Move the UPLL clock registration to the central clock file, and add an enable method Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3329/1: S3C24XX - fix time for osiris machineBen Dooks1-1/+7
Patch from Ben Dooks Add selection for timer code for the Simtec Osiris Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3327/1: S3C2410 - add osiris machine supportBen Dooks3-0/+298
Patch from Ben Dooks Support for Simtec IM2440D20 CPU modules (Osiris) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3261/2: remove phys_ram from struct machine_desc (part 3)Nicolas Pitre1-4/+3
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. There is no reference to it anymore so remove it at last. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.