| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.
Fix those
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Our display engine endpoints trigger some DTC warnings due to the fact that
we're having a single endpoint that doesn't need any reg property, and
since we don't have a reg property, we don't need the address-cells and
size-cells properties anymore.
Fix those
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Since most of the display IPs have a single endpoint, having a reg
property, a unit-address and #address-cells and #size-cells will emit a
warning.
Let's remove those.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Unlike what the binding for multiple pipeline documents, the A83t doesn't
have the cross links between the TCON and the mixers.
Let's add them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Make sure that A20 Olimex Lime2 pin bank regulators are
properly represented.
While pin banks A, B and F are connected to 3.3V static
regulator, pin banks E and G tied with LDO3 and LDO4 regulators
with 2.8V reference.
Signed-off-by: Priit Laes <priit.laes@paf.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Since only one alternative at a time is used, and some functions may not
be used at all, this cuts down the size of the board dtb files a bit.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
This adds pinctrl settings the EMAC using pins in the PH block.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
This adds pinctrl settings for the CAN controller using pins
PA16 and PA17.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
This adds pinctrl settings for various missing uart options.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The H3 and H5 have never been converted to the new convention we want to
have for the pinctrl nodes.
Convert them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Some nodes still have pinctrl-names entry, yet they don't have any pinctrl
group anymore. Drop them.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
The SoC name EXYNOS5420 was misspelled.
Signed-off-by: Benjamin Drung <bdrung@posteo.de>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem
caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay
for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by
coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up
at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix
transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change
on driver part.
* tag 'imx-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v4_v5_defconfig: enable PWM driver
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
ARM: dts: pfla02: increase phy reset duration
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
ARM: imx51: fix a leaked reference by adding missing of_node_put
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
|
|
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.1, please pull the following:
- Helen fixes the HDMI hot-pug detect GPIO polarity for the Rasperry Pi
model B revision 2
* tag 'arm-soc/for-5.1/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Fix hdmi hpd gpio pull
|
|
The SPI DT bindings are for historical reasons a pitfall,
the ability to flag a GPIO line as active high/low with
the second cell flags was introduced later so the SPI
subsystem will only accept the bool flag spi-cs-high
to indicate that the line is active high.
It worked by mistake, but the mistake was corrected
in another commit.
The comment in the DTS file was also misleading: this
CS is indeed active high.
Fixes: cffbb02dafa3 ("ARM: dts: nomadik: Augment NHK15 panel setting")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
allnoconfig build with just ARCH_DAVINCI enabled
fails because drivers/clk/davinci/* depends on
REGMAP being enabled.
Fix it by selecting REGMAP_MMIO when building in
DaVinci support.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
They are pointless. As dtc points out:
Warning (avoid_unnecessary_addr_size):
/gpio-keys:
unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Let's remove them.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
They are pointless. As dtc points out:
Warning (avoid_unnecessary_addr_size):
/mipi@ff960000:
unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Let's remove them.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The device tree compiler yells like this:
Warning (unit_address_vs_reg):
/gpu-opp-table/opp@100000000:
node has a unit name, but no reg property
Let's match the cpu opp node names and use a dash.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The vdd_logic rail controls the voltage supplied to misc logic on
rk3288, including the voltage supplied to the memory controller. The
vcc logic is implemented by a PWM regulator.
Right now there are no consumers of vdd_logic on veyron but if anyone
ever wants to try to add DDR Freq they'd need it.
Note that in the downstream Chrome OS kernel the PWM regulator has
a voltage table with these points:
1350000 0%
1300000 10%
1250000 20%
1200000 31%
1150000 41%
1125000 46%
1100000 52%
1050000 62%
1000000 72%
950000 83%
The DDR Freq driver in the downstream kernel only uses some of those
points, namely:
DDR3: 1200000, 1150000, 1100000, 1050000
LPDDR: 1150000, 1100000, 1050000
When adapting the downstream kernel to upstream I have opted to switch
to using the "continuous" mode of the PWM regulator driver. This was
the only way I could get the upstream driver to achieve _exactly_ the
same voltages as the downstream driver could. Specifically note that
the old driver in downstream Chrome OS 3.14 _didn't_ have the
DIV_ROUND_CLOSEST_ULL() in the Rockchip PLL driver. That means if I
use the same (downstream) table I might end up with a duty cycle
that's 1 larger than was used downstream, leading to a slightly
different voltage. Due to the way the rounding worked I couldn't even
just adjust the "percent" by 1 for a given voltage level--certain duty
cycles just aren't achievable with the upstream math for voltage
tables.
Using continuous mode you can achieve the exact same duty cycle by
simply adjusting the voltage you use by a tad bit. The voltages that
are equivalent to the ones used in the downstream kernel's table are:
1350000, 1304472, 1255691, 1200407, 1154878,
1128862, 1099593, 1050813, 1005285, 950000
Note that the top/bottom voltage is exactly the same just due to the
way that continuous mode is calculated and the fact that I used those
as anchors. I didn't make any attempt to do the resistor math (as was
done on rk3399-gru).
If anyone ever gets DDRFreq working on veyron upstream they should
thus adjust the voltage specified in the DDRFreq operating points
slightly (as per the above) to obtain the existing/tested values. AKA
you'd use:
DDR3: 1200407, 1154878, 1099593, 1050813
LPDDR: 1154878, 1099593, 1050813
A few other notes:
- The "period" here (1994) is different than the "period" downstream
(2000) for similar reasons: there's a DIV_ROUND_CLOSEST_ULL() that
wasn't downstream. With 1994 upstream comes up with the same value
(0x94) to program into the hardware that downstream put there. As
far as I can tell 0x94 actually means 1993.27.
- The duty cycle unit of 0x94 was picked by just matching the period
which nicely allows us to insert 0x7b as that value to program into
the hardware for 950mV. The 0x7b was found by observing what the
downstream kernel calculated (not that the system can actually run
with vdd_log at 950 mV).
- The downstream kernel can also be seen to program a different value
into the CTRL field. Upstream achieves 0x0b and downstream 0x1b.
This is because the upstream commit bc834d7b07b4 ("pwm: rockchip:
Move the configuration of polarity") fixed a bug by adding "ctrl &=
~PWM_POLARITY_MASK". Downstream accidentally left bit 4 set.
Luckily this bit doesn't matter--it's only used when the PWM goes
inactive (AKA if it's in oneshot mode or is disabled) and we don't
do that for the PWM regulator.
I measured the voltage of vdd_log while adjusting it and found that
with the upstream kernel voltage difference between requested and
actual was 9.2 mV at 950 mV and 13.4 mV at 1350 mV with in-between
voltages consistently showing ~1% error. This error is likely
expected as voltage can be seen to sag a bit when more load is put on
the rail.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
When the rk3288-jerry device tree was first submitted we left out the
dvs-gpios because I pointed out that the property "dvs-gpios" wasn't
yet supported upstream [1]. Soon after that the property was added in
commit bad47ad2eef3 ("regulator: rk808: fixed the overshoot when
adjust voltage"). ...but we forgot to go back and add the property to
the jerry device tree file. Let's do so now.
NOTE: without this patch, jerry is likely still stable (thanks to the
fallback of making many small jumps in the rk808 regulator code) but
it'll take quite a bit longer to make voltage transitions.
[1] https://lore.kernel.org/linux-arm-kernel/CAD=FV=WwFgjzbk9xF5TU_ie6UnHQMyrZ176D4+jJTWWOoaKC2Q@mail.gmail.com/
Fixes: f3ee390e4ef2 ("ARM: dts: rockchip: add veyron-jerry board")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
As far as I can tell/remember rev10 was originally created to support
making a SKU of jerry that had a different LCD. rev11-rev15 were
added to give some wiggle room for future builds. Downstream has a
separate device tree for rev10-rev15 (compared to rev3-rev7) with the
expectation that differences relating to the LCD would be accounted
for there but nothing was ever added to the rev10-rev15 making it
identical to the rev3-rev7 one.
It's likely nothing actually shipped with rev10-rev15 but they are
listed in the downstream kernel's device tree and it seems like it
should add a little safety if we match them here just in case
something actually shipped with one of these revisions and that device
will break if we don't claim support.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This patch adds HDMI video output support to the iwg23s board
from iWave. Due to a problem with the bootloader not dealing
with the configuration of one of the pins correctly, we have
to use a gpio-hog for the interrupt line to make sure the pin
is configured as GPIO-input when requesting the interrupt.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
This commit adds DU support to the RZ/G1C (a.k.a. r8a77470)
specific device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Commit d02752149759 ("ARM: dts: sun8i-a23-a33: Move NAND controller device
node to sort by address") moved the NAND controller node around, but
dropped the default muxing in the process.
Reintroduce it.
Fixes: d02752149759 ("ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Correctly map the regulators used by tlv320aic3106.
Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators.
Cc: <Stable@vger.kernel.org> # v4.14+
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Correctly map the regulators used by tlv320aic3106.
Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators.
Cc: <Stable@vger.kernel.org> # v4.14+
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
In order to request dynamic allocationn of GPIO IDs, a negative number
should be passed as a base GPIO ID via platform data. Unfortuntely,
commit 771e53c4d1a1 ("ARM: OMAP1: ams-delta: Drop board specific global
GPIO numbers") didn't follow that rule while switching to dynamically
allocated GPIO IDs for Amstrad Delta latches, making their IDs
overlapping with those already assigned to OMAP GPIO devices. Fix it.
Fixes: 771e53c4d1a1 ("ARM: OMAP1: ams-delta: Drop board specific global GPIO numbers")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Replace all calls to may_use_simd() in the arm crypto code with
crypto_simd_usable(), in order to allow testing the no-SIMD code paths.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Describe the 128 MiB CFI NOR FLASH, which contains the boot loader and
its environment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
After switching to the new FSL QSPI driver the properties
'fsl,qspi-has-second-chip' and 'big-endian' are not used anymore.
The driver now uses the 'reg' property to determine the bus and
the chipselect. The endianness is selected by the driver depending
on which SoC is used.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
While there is no mainline board that makes use of the PWM still enable the
driver for it to increase compile test coverage.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
After the pwm-imx driver was split into two drivers and the Kconfig symbol
changed accordingly, use the new name to continue being able to use the
PWM hardware.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Even though the ChipIdea USB controller binding[1] doesn't specify the
properties that reference a PHY as required, the Linux driver
requires[2] such a reference.
The clock situation is like on i.MX53: The USB controller is clocked
from IMX5_CLK_USBOH3_GATE and the PHY from IMX5_CLK_USB_PHY1_GATE.
[1]: Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt
[2]: Search for EINVAL in drivers/usb/chipidea/ci_hdrc_imx.c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Using aliases, the devices will be enumerated properly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Using aliases, the devices will be enumerated properly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Using aliases, the devices will be enumerated properly.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The switch is accessible through pseudo PHY which is located at 0x10.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Fixes: 87489ec3a77f ("ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch fixes a spelling typo.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Fixes: cc42603de320 ("ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add 'cap-mmc-highspeed' property to enable high-speed support for MMC cards.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
It can be seen that 0xffb40000 < 0xffc01000, thus efuse comes first.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull irqchip updates for 5.1 from Marc Zyngier:
- irqsteer error handling fix
- GICv3 range coalescing fix
- stm32 coprocessor coexistence fixes
- mbigen MSI teardown fix
- non-DT secondary GIC infrastructure removed
- various cleanups (brcmstb-l2, mmp)
- new DT bindings (r8a774c0)
|
|
The device tree binding already lists compatible strings for these two
SoCs. Add a device node for them.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The 'max-brightness' property is not a valid one as per
Documentation/devicetree/bindings/leds/leds-gpio.txt, so remove it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add MMDC1 compatible string which is missing, and also set
it to be disabled by default, as most of the platforms ONLY
use single channel MMDC0, if dual MMDC channels are used, it
can be enabled in board dts file.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Node name should be generic, so use "memory-controller"
instead of "mmdc" for MMDC node name, also remove "mmdc"
label for platforms with single MMDC node.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX7ULP has a MMDC module to control DDR, it reuses
i.MX6Q's MMDC module, add support for it.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This patch corrects the SPDX License Identifier style
in imx6ull-pinfunc-snvs.h.
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46
and making some manual changes.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This argument is required to extend the generic ptrace API with
PTRACE_GET_SYSCALL_INFO request: syscall_get_arch() is going
to be called from ptrace_request() along with syscall_get_nr(),
syscall_get_arguments(), syscall_get_error(), and
syscall_get_return_value() functions with a tracee as their argument.
The primary intent is that the triple (audit_arch, syscall_nr, arg1..arg6)
should describe what system call is being called and what its arguments
are.
Reverts: 5e937a9ae913 ("syscall_get_arch: remove useless function arguments")
Reverts: 1002d94d3076 ("syscall.h: fix doc text for syscall_get_arch()")
Reviewed-by: Andy Lutomirski <luto@kernel.org> # for x86
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Kees Cook <keescook@chromium.org> # seccomp parts
Acked-by: Mark Salter <msalter@redhat.com> # for the c6x bit
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: x86@kernel.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-mips@vger.kernel.org
Cc: nios2-dev@lists.rocketboards.org
Cc: openrisc@lists.librecores.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-riscv@lists.infradead.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Cc: linux-arch@vger.kernel.org
Cc: linux-audit@redhat.com
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
Maxime Ripard
Priit Laes
Mans Rullgard
Benjamin Drung
Arnd Bergmann
Linus Walleij
Sekhar Nori
Douglas Anderson
Fabrizio Castro
Peter Ujfalusi
Julia Lawall
Janusz Krzysztofik
Eric Biggers
Geert Uytterhoeven
Frieder Schrempf
Uwe Kleine-König
Jonathan Neuschäfer
Alexander Kurz
Michal Vokáč
Masanari Iida
Dinh Nguyen
Thomas Gleixner
Chen-Yu Tsai
Fabio Estevam
Anson Huang
Nishad Kamdar
Dmitry V. Levin