| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This pull request contains Broadcom ARM-based SoCs machine files updates
for 4.21, please pull the following:
- Stefan switches relevant BCM283x files under arch/arm/mach-bcm to the
SPDX license identifiers
- Justin adds an entry in the Broadcom STB debug LL stub for 7255
- Florian enables reset controller support for BCM63xx SoCs
* tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux:
ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
ARM: BCM63XX: Enable reset controller support
ARM: brcmstb: Add entry for 7255
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This pull request contains Broadcom ARM-based SoCs Device Tree fixes,
please pull the following for 4.20:
- Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would
break on Raspberry Pi 3B and 3B+
* tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Qualcomm Device Tree Changes for v4.21
* Add entry for Qualcomm TSENS thermal drivers
* Update msm8974 thermal entries
* Fix msm8974 Hammerhead magnetometer gpios
* Add SoC specific compatibles for SDHC nodes
* Remove Arrow SD600 eval board
* tag 'qcom-dts-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: Remove Arrow SD600 eval board
ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodes
ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer
ARM: dts: msm8974: thermal: Add "qcom,sensors" property
ARM: dts: msm8974: thermal: split address space into two
MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This enables drivers for STM32 timer, low power timer and analog hardware
that can be used on STM32MP1 SoC:
- Timer & LP Timer MFD core, PWM, trigger & encoder drivers
- IIO ADC/DAC/DFSDM
- vrefbuf regu driver (voltage reference buffer).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
There are more boards that can work with mmp2-dt than just Brownstone.
The OLPC XO-1.75 device tree root is compatible with "mrvl,mmp2" only.
The "mrvl,mmp2-brownstone" string is safe to remove: the Brownstone
device tree contains the "mrvl,mmp2" compatible string too.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:
- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
license and adds proper SPDX license tags in the process
- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
BCM4708 plus two BCM4360 and BCM4331 radios
- Phil documents and updates the vchiq mailbox compatible string in
order to establish a correct agreement between the Raspberry Pi
firmware and the ARM CPU's view of what an ARM CPU cache line size is,
he also fixes the mailbox "reg" property to be correctly expressed in
bytes
- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags
- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
he also does a bit of refactoring of aliases for the Northstar Plus
DTS files
* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Describe Northstar pins mux controller
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
ARM: dts: bcm283x: Correct mailbox register sizes
ARM: dts: bcm283x: Correct vchiq compatible string
dt-bindings: soc: Document "brcm,bcm2836-vchiq"
ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for
multiplatform kernels. Fix it by also considering mmp_chip_id, as is
done for cpu_is_pxa168() and cpu_is_pxa910() above.
Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work
on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too.
Note: CONFIG_CPU_MMP2 is only used for machines that use board files
instead of DT. It should perhaps be renamed. I'm not doing it now, because
I don't have a better idea.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The commit b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
introduced a wifi power sequence. Unfortunately the polarity of the reset
GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and
later in 3 B+. This wasn't discovered before since the power sequence
takes only effect in case the relevant MMC driver is compiled as a module.
Fixes: b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
Cc: stable@vger.kernel.org
Reported-by: Matthias Lueschner <lueschem@gmail.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Mark as opp-suspend required devfreq Operating Performance Points to
fix resuming issues on Exynos 4 boards.
The patch is based on earlier work by Tobias Jakobi.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add configuration on DT for thermal sensor driver.
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Add option for Allwinner ARMv5 SoCs and SoC F1C100s (which has a die
used for many new F-series products, including F1C100A, F1C100s, F1C200s,
F1C500, F1C600).
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Allwinner also has some ARMv5 SoCs.
In order to add support for them, check ARM_MULTI_V7 before enabling
ARMv7 SoC's. Add help text for ARCH_SUNXI menuconfig.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Add pinctrl sleep state for can1 on stm32mp157c-ev1.
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Add can1 pinctrl definition for low-power mode
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Split the 10Kbytes CAN message RAM to be able to use simultaneously
FDCAN1 and FDCAN2 instances.
First 5Kbytes are allocated to FDCAN1 and last 5Kbytes are used for
FDCAN2. To do so, set the offset to 0x1400 in mram-cfg for FDCAN2.
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
|
|
Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This is the layout used by Facebook BMC systems. It describes the fixed
flash layout of a 32MB mtd device.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The BMC can read the RTC battery voltage via ADC
channel 12.
Signed-off-by: Matt Spinler <spinler@linux.vnet.ibm.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add iio-hwmon-battery using adc channel 12 and enable adc to make
adc running. This channel is used to read RTC battery voltage.
Note with Romulus hardware design, it requires GPIOR3 to be pulled
high to read the voltage, otherwise the reading is 0.
When GPIOR3 is high, it consumes battery and impacts the battery life.
So it is left for user space to toggle the GPIO when trying to read the
voltage.
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Romulus USB bus is connected to the Power9's PCIe USB controller.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This adds the required LPC node with phandles to the reserved memory
region and the mtd device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This allows userspace to switch away from bitbanging to use kernel
FSI with the coprocessor.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This replaces the FSI compatible with the ColdFire FSI compatible.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Pull ARM SoC fixes from Olof Johansson:
"Volume is a little higher than usual due to a set of gpio fixes for
Davinci platforms that's been around a while, still seemed appropriate
to not hold off until next merge window.
Besides that it's the usual mix of minor fixes, mostly corrections of
small stuff in device trees.
Major stability-related one is the removal of a regulator from DT on
Rock960, since DVFS caused undervoltage. I expect it'll be restored
once they figure out the underlying issue"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
MAINTAINERS: Remove unused Qualcomm SoC mailing list
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
ARM: dts: at91: sama5d2: use the divided clock for SMC
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
ARM: dts: rockchip: Remove @0 from the veyron memory node
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
...
|
|
PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.
While at it, unify the names for the nodes across all pxa platforms.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
The clock controller node does not need a unit slave designator as it does
not have a reg property. Also, remove the underscore from the name.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
These are devices on the PXA bus, so make the device tree structure
reflect that.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
The memory range for the hwuart is at 0x41600000, not 0x41100000.
This also solves a conflict with the MMC controller node.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
The pinctrl node does not have any children, so the #address-cells and #size-cells
properties are not needed.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
PXA is single-core only, so this node will not have enumerable children.
Drop the #address-cells and #size-cells properties to squelch a dtc warning.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
Add a device node for hardware graphic acceleration.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
In commit 54a702f70589 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers"), I missed one important feature of the
.SECONDARY target:
.SECONDARY with no prerequisites causes all targets to be
treated as secondary.
... which agrees with the policy of Kbuild.
Let's move it to scripts/Kbuild.include, with no prerequisites.
Note:
If an intermediate file is generated by $(call if_changed,...), you
still need to add it to "targets" so its .*.cmd file is included.
The arm/arm64 crypto files are generated by $(call cmd,shipped),
so they do not need to be added to "targets", but need to be added
to "clean-files" so "make clean" can properly clean them away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The dma remap code only makes sense for not cache coherent architectures
(or possibly the corner case of highmem CMA allocations) and currently
is only used by arm, arm64, csky and xtensa. Split it out into a
separate file with a separate Kconfig symbol, which gets the right
copyright notice given that this code was written by Laura Abbott
working for Code Aurora at that point.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
Add node for s5p-jpeg codec, which is present in S5PV210 SoC.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Defconfig changes for omaps for v4.21 merge window
We're finally changing omaps to use 8250_OMAP instead of SERIAL_OMAP
for multi_v7_defconfig. This will make things much easier for distros,
and the kernel already warns about the kernel console getting
redirected with CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP defaulting to y.
People using /etc/inittab still need to s/ttyO/ttyS/ if using the
out-of-box multi_v7_defconfig, and that did not seem to be an issue
when we moved omap2plus_defconfig to use 8250_OMAP earlier.
The other change is to enable CONFIG_SND_SOC_TLV320AIC23_I2C as a
loadable module that I forgot to send a pull request for earlier.
* tag 'omap-for-v4.21/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default
ARM: omap2plus_defconfig: Add tlv320aic23 as module
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
SoC changes for omaps for v4.21 merge window
Few more non-critical section annotation fixes for Clang and
remove obsolete timer header inclusion.
* tag 'omap-for-v4.21/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: timer: Remove obsolete inclusion of <asm/smp_twd.h>
ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
ARM: OMAP2+: hwmod: Fix some section annotations
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Versatile Express defconfig updates:
This activates the new PL11x DRM driver with the
Versatile Express family of reference designs.
* tag 'vexpress-defconfig-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This will replace the *_pdata.phy_{de,}init()
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This is to replace the USB PHY initialization code (pxa_usb_phy_init(),
pxa_usb_phy_deinit()) with a proper PHY driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The device-tree booted MMP2 needs to enable the timer clock, otherwise
it would stop ticking when the boot finishes.
It can also use the clock rate from the clk, the non-DT boards need to
keep using the hardcoded rates.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The timer shall enable its clock.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
SoCFPGA updates for v5.0
- Split Kconfig options for debug UART on Cyclone5
- Remove unused functions from socfpga platform code
- Turn on ARM and PL310 errata for SOCFPGA ARMv7 platform
* tag 'socfpga_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Turn on ARM errata for L2 cache
ARM: socfpga: Clean unused functions
ARM: debug: enable UART1 for socfpga Cyclone5
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The base aspeed-g5.dtsi already defines a '/memory@80000000' node, so
'/memory' in the board files create a duplicate node. We're probably
getting lucky that the bootloader fixes up the memory node that the
kernel ends up using. Add the unit-address so it's merged with the base
node.
Found with DT json-schema checks.
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Amlogic 32-bit DT updates for v4.21
- support more timers on meson8
- add the stdout-path property on several boards
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: add the clock inputs for the Meson timer
ARM: dts: meson: add the TIMER B/C/D interrupts
ARM: dts: meson: consistently disable pin bias
ARM: dts: meson8b: mxq: add the /chosen/stdout-path property
ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property
ARM: dts: meson6: atv1200: add the /chosen/stdout-path property
dt-bindings: timer: meson6_timer: document the clock inputs
dt-bindings: timer: meson6_timer: document all interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Device tree changes for omaps for v4.21 merge window
These changes mostly configure pinctrl for am437x-gp-evm. There is
also non-critical fix for a comment for Clang, and we enable earlycon
for am3517-evm.
* tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
ARM: dts: am3517-evm: Enable earlycon stdout path
ARM: dts: omap3-gta04: Fix comment block
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.
* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: Modernize the Vexpress PL111 integration
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.
SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
Olof Johansson
Fabrice Gasnier
Lubomir Rintel
Rob Herring
Stefan Wahren
Lukasz Luba
David Hernandez Sanchez
Mesih Kilinc
Bich HEMON
Tao Ren
Matt Spinler
Lei YU
Joel Stanley
Benjamin Herrenschmidt
Linus Torvalds
Daniel Mack
Masahiro Yamada
Christoph Hellwig
Paweł Chmiel