aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2022-08-29ARM: dts: qcom: msm8226: override nodes by labelKrzysztof Kozlowski1-4/+2
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-2-krzysztof.kozlowski@linaro.org
2022-08-29ARM: dts: qcom: msm8960: override nodes by labelKrzysztof Kozlowski2-284/+283
Using node paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). This also reduces the indentation making the code easier to read. The pre/post DTBS are the same. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220810080516.166866-1-krzysztof.kozlowski@linaro.org
2022-08-29ARM: dts: qcom: ipq8064: add ipq8065 variantChristian Marangi2-0/+45
ipq8065 SoC is based on ipq8064-v2.0 with a more clocked CPU and an increased voltage output with the smb208 regulators. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-3-ansuelsmth@gmail.com
2022-08-29ARM: dts: qcom: ipq8064: add ipq8062 variantChristian Marangi2-0/+45
ipq8062 SoC is based on ipq8064-v2.0 with lower supported freq, lack of usb port and a reduced voltage output with the smb208 regulators. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-2-ansuelsmth@gmail.com
2022-08-29ARM: dts: qcom: ipq8064: add v2 dtsi variantChristian Marangi2-0/+106
Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for some additional pcie, sata and usb configuration values, additional reserved memory and serial output. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718161826.4943-1-ansuelsmth@gmail.com
2022-08-29ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpiosDmitry Baryshkov5-7/+7
Replace deprecated perst-gpio properties with up-to-date perst-gpios in the arm32 Qualcomm Snapdragon device trees. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220506152107.1527552-8-dmitry.baryshkov@linaro.org
2022-08-29ARM: dts: qcom: stop using snps,dw-pcie falbackDmitry Baryshkov2-2/+2
Qualcomm PCIe devices are not really compatible with the snps,dw-pcie. Unlike the generic IP core, they have special requirements regarding enabling clocks, toggling resets, using the PHY, etc. This is not to mention that platform snps-dw-pcie driver expects to find two IRQs declared, while Qualcomm platforms use just one. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220506152107.1527552-7-dmitry.baryshkov@linaro.org
2022-08-29ARM: dts: qcom-msm8916-samsung-e2015: Include dts from arm64Lin, Meng-Bo4-0/+12
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com
2022-08-29ARM: dts: at91: sam9x60ek: remove simple-bus for regulatorsClaudiu Beznea1-42/+36
Keep regulators as individual devices. There is no need to have them under simple bus. This will throw compilation warnings like: - unnecessary #address-cells/#size-cells without "ranges" or child "reg" property. - node has a unit name, but no reg or ranges property. While at it move it down a bit in the file to keep entries sorted alphabetically. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-10-claudiu.beznea@microchip.com
2022-08-29ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64BClaudiu Beznea2-2/+0
Since commit f611af4c3bfa ("ARM: at91: Kconfig: implement PIT64B selection") there is no need to explicitly select PIT64B. Fixes: f611af4c3bfa ("ARM: at91: Kconfig: implement PIT64B selection") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220826083927.3107272-2-claudiu.beznea@microchip.com
2022-08-29ARM: dts: lan966x: add support for pcb8290Horatiu Vultur2-0/+176
Add basic support for pcb8290. It has 2 lan8814 phys(each phy is a quad-port) on the external MDIO bus and no SFP ports. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220825065135.1075049-1-horatiu.vultur@microchip.com
2022-08-29ARM: ixp4xx: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220318103729.157574-26-Julia.Lawall@inria.fr Link: https://lore.kernel.org/r/20220826112153.438829-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29Merge tag 'versatile-dts-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/fixesArnd Bergmann6-7/+7
These are some Versatile family DTS fixes, fixing some node names and clock names related to SPI. * tag 'versatile-dts-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: versatile: Update spi clock-names property ARM: dts: realview: Update spi clock-names property ARM: dts: integratorap: Update spi node properties Link: https://lore.kernel.org/r/CACRpkdZfTe8NSGR2ZCkn-1JcNobjfWeXqajSqcJMp8+WtY+2Xw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: configs: replace CONFIG_NO_HZ=y with CONFIG_NO_HZ_IDLE=yStefan Hansson34-34/+34
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html, CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer kernels, so let's reflect that in the 32-bit ARM defconfigs. Signed-off-by: Stefan Hansson <newbie13xd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: fix CONFIG_SND_SOC_AC97_CODEC nameArnd Bergmann1-1/+1
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not actually exist. From the patch description, I assume that this was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in imx_v6_v7_defconfig. Fixes: 2cc1cd26e913 ("ARM: configs: Enable ASoC AC'97 glue") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_MICROCHIP_PIT64BArnd Bergmann1-1/+0
This is now default-enabled when CONFIG_SOC_SAMA7 is used, so the defconfig entry can be dropped. Fixes: f611af4c3bfa ("ARM: at91: Kconfig: implement PIT64B selection") Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_USB_FSL_USB2Arnd Bergmann1-1/+0
USB_FSL_USB2 is no longer available for Arm platforms and was replaced by the chipidea driver. Fixes: a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver") Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_SND_SOC_FSL_SAIArnd Bergmann1-1/+0
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the extra line is redundant. Fixes: 212e3b6b8734 ("ARM: configs: Enable more audio support for i.MX") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_PTP_1588_CLOCK=yArnd Bergmann3-3/+0
PTP support is now enabled by default for configurations with ethernet support, so drop the redundant entries in defconfig files. Fixes: e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_DRM_RCAR_LVDSArnd Bergmann1-1/+0
This is now a hidden symbol, so just drop the defconfig line. Fixes: 42d95d1b3a9c ("drm/rcar: stop using 'imply' for dependencies") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_SERIAL_OMAP referencesArnd Bergmann2-4/+0
This driver is mutually exclusive with the new 8250_OMAP driver, so 'make defconfig' turns it off already. Drop the reference now. Fixes: 077e1cde78c3 ("ARM: omap2plus_defconfig: Enable 8250_OMAP") Fixes: f98d45145e6a ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default") Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: drop CONFIG_NET_VENDOR_ASIX=yArnd Bergmann1-1/+0
This option is 'default y' and has always been this way, the line was added in error. Fixes: dfe21dcabac0 ("ARM: defconfig: Enable ax88796c driver for Exynos boards") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: clean up multi_v4t and multi_v5 configsArnd Bergmann2-3/+0
Integrator now selects the regulators and versatile selects the reset driver, so the correspondig options can be dropped from the defconfig files. Fixes: d2854bbe5f5c ("ARM: integrator: Add some Kconfig selections") Fixes: 1c6e288da6cc ("ARM: versatile: move restart to the device tree") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: defconfig: reorder defconfig filesArnd Bergmann32-46/+46
The debug-info and can subystem options have moved around in the 'savedefconfig' output, so fix these up to reduce the clutter from the savedefconfig command. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-08-29ARM: shmobile: defconfig: Refresh for v6.0-rc1Geert Uytterhoeven1-1/+7
Refresh the defconfig for Renesas ARM systems: - Enable RZ/N1 A5PSW Ethernet switch support incl. dependencies (RZN1D-DB), - Move CONFIG_CAN_RCAR=y (moved in commit d7786af59860a113 ("net: Kconfig: move the CAN device menu to the "Device Drivers" section")), - Enable RZ/N1 Gigabit Ethernet MAC support (RZN1D-DB), - Enable RZ/N1 Pin control support (RZN1D-DB), - Enable RZ/N1 DMA support incl. dependencies (RZN1D-DB). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/428755447c1abbc8f1f08a63e83353d23ab22dd6.1661154821.git.geert+renesas@glider.be
2022-08-26ARM: dts: Let Gemini NS2502 parse redboot partitionsLinus Walleij1-24/+3
The NS2502 uses hardcoded partitions but parsing the RedBoot FIS should work fine, given that this flash seems to be using 0x200000 erase blocks. Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Link: https://lore.kernel.org/r/20220412220358.3674598-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26ARM: dts: gemini: ssi1328: permit to use gigabitCorentin Labbe1-4/+0
I believed that gigabit was not working due to unknown missing GPIO. But the problem was due to Marvell PHY incorrectly setting delay. Now it is fixed, gigabit works. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26ARM: dts: gemini: ns2502: permit to use gigabitCorentin Labbe1-5/+1
I believed that gigabit was not working due to some unknown missing GPIO. In fact, gigabit worked when REALTEK_PHY was compiled out. So the problem was due to PHY delay and we need to use rgmii-id. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-08-26crypto: Kconfig - simplify cipher entriesRobert Elliott1-9/+31
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - simplify hash entriesRobert Elliott1-29/+65
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - simplify CRC entriesRobert Elliott1-2/+15
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - simplify public-key entriesRobert Elliott1-1/+6
Shorten menu titles and make them consistent: - acronym - name - architecture features in parenthesis - no suffixes like "<something> algorithm", "support", or "hardware acceleration", or "optimized" Simplify help text descriptions, update references, and ensure that https references are still valid. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - sort the arm entriesRobert Elliott1-55/+56
Sort the arm entries so all like entries are together. Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26crypto: Kconfig - submenus for arm and arm64Robert Elliott7-18/+2
Move ARM- and ARM64-accelerated menus into a submenu under the Crypto API menu (paralleling all the architectures). Make each submenu always appear if the corresponding architecture is supported. Get rid of the ARM_CRYPTO and ARM64_CRYPTO symbols. The "ARM Accelerated" or "ARM64 Accelerated" entry disappears from: General setup ---> Platform selection ---> Kernel Features ---> Boot options ---> Power management options ---> CPU Power Management ---> [*] ACPI (Advanced Configuration and Power Interface) Support ---> [*] Virtualization ---> [*] ARM Accelerated Cryptographic Algorithms ---> (or) [*] ARM64 Accelerated Cryptographic Algorithms ---> ... -*- Cryptographic API ---> Library routines ---> Kernel hacking ---> and moves into the Cryptographic API menu, which now contains: ... Accelerated Cryptographic Algorithms for CPU (arm) ---> (or) Accelerated Cryptographic Algorithms for CPU (arm64) ---> [*] Hardware crypto devices ---> ... Suggested-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-26ARM: dts: aspeed: Add HACE device controller nodeNeal Liu2-0/+16
Add hace node to device tree for AST2500/AST2600. Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> Reviewed-by: Dhananjay Phadke <dphadke@linux.microsoft.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-22ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM fileChristoph Niedermaier2-33/+33
The SoM itself provides the display interface, see [1] page 20. Those pins have to be used as the RGB/DPI interface or not used at all. So rather than duplicate the pinmux settings in every carrier board DT, better move them into the SoM DTSI. [1] https://wiki.dh-electronics.com/images/2/2e/DOC_DHCOM-Standard-Specification_R01_2016-11-17.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to MakefileFrieder Schrempf1-0/+1
The imx6ull-kontron-bl.dtb wasn't build as part of the CONFIG_SOC_IMX6UL option. Add it to the list. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6ul-kontron: Simplify devicetree structureFrieder Schrempf13-164/+67
There is no need in differentiating between the different SoM versions that only differ in memory size, etc. It's much cleaner to simplify the devicetrees and let them be more generic. If necessary the bootloader will update the devicetree dynamically to contain the correct size of the memory. We also get rid of the N6xxx notation in the compatibles and file names, as they are not really used anymore and often result in confusion. This is a breaking change, but the impact shouldn't be too big and it makes usage and maintenance easier in the future. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: vf610: align SPI node name with dtschemaKrzysztof Kozlowski2-2/+2
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align gpio-keys node names with dtschemaKrzysztof Kozlowski22-75/+75
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align LED node names with dtschemaKrzysztof Kozlowski5-5/+5
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx: align SPI node name with dtschemaKrzysztof Kozlowski8-9/+9
The node names should be generic and DT schema expects certain pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-22ARM: dts: imx6qdl-tqma6x: add fixed power suppliesPhilipp Zabel2-0/+2
Add fixed power supplies to the EEPROM nodes to suppress a warning: at24 2-0050: supply vcc not found, using dummy regulator Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: ls1021a: Use generic node name for DMAKuldeep Singh1-1/+1
DT spec expects generic DMA controller node name as "dma-controller" to enable validations. Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: hook up DDC i2c busLucas Stach1-1/+5
i2c2 is routed to the pins dedicated as DDC in the module standard. Reduce clock rate to 100kHz to be in line with VESA standard and hook this bus up to the HDMI node. Fixes: 708ed2649ad8 ("ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> [m.felsch@pengutronix.de: add fixes line] Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-nodeMarco Felsch1-1/+13
Add ethernet-phy node so we can drop the deprecated fec phy-reset-gpios property. The reset-assert-us value is taken from the existing logic since the fec driver will add an 1ms assert delay per default if phy-reset-gpios is used and phy-reset-duration is not specified. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatibleMarco Felsch1-1/+1
Drop the "winbond,w25q16dw" compatible since it causes to set the MODALIAS to w25q16dw which is not specified within spi-nor id table. Fix this by use the common "jedec,spi-nor" compatible. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-kontron-samx6i: remove duplicated nodeMarco Felsch1-10/+0
The regulator node 'regulator-3p3v-s0' was dupplicated. Remove it to clean the DTS. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_ledDavid Jander1-1/+1
This naming error slipped through, so now that a new backlight node has been added with correct spelling, fix this one also. Fixes: 98efa526a0c4 ("ARM: dts: imx6qdl-vicut1/vicutgo: Add backlight_led node") Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-08-21ARM: dts: imx6qdl-vicut1.dtsi: Add backlight-isb nodeDavid Jander1-0/+22
On some older hardware models this is needed. It will do no harm if used with newer models though. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.