aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22ARM: dts: imx6: phycore-som: Disable micro-SD write protectionYunus Bas2-0/+2
The micro-SD card doesn't feature a write-protect pin. Set the corresponding property in the devicetree to handle this behavior correctly and suppress driver warnings. Signed-off-by: Yunus Bas <y.bas@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: Fix USB host power regulator polarity on M53MenloMarek Vasut1-2/+1
The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: Add missing pinctrl-names for panel on M53MenloMarek Vasut1-0/+1
The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: fix the schema check errorsRichard Zhu4-12/+10
- ranges property should be grouped by region, with no functional changes. Otherwise, schema dtbs_check would report the following errors. "linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: linux-imx/arch/arm/boot/dts/imx6qp-vicutp.dt.yaml: pcie@1ffc000: ranges: 'oneOf' conditional failed, one must be fixed: [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'boolean' True was expected [[2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640]] is not of type 'null' [2164260864, 0, 0, 33030144, 0, 65536, 2181038080, 0, 16777216, 16777216, 0, 15728640] is too long From schema: linux-imx/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml" - refer to commit 281f1f99cf3a ("PCI: dwc: Detect number of iATU windows"). The num-viewport is not required anymore, remove them totally. - dt_binding_check complains "compatible: ['fsl,imx6qp-pcie', 'snps,dw-pcie'] is too long", remove "snps,dw-pcie" from the compatible string. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"Fabio Estevam1-0/+3
This reverts commit cc8870bf4c3ab0af385538460500a9d342ed945f. Since commit cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") the following errors are seen on boot: [ 0.123372] imx6q_suspend_init: failed to find ocram device! [ 0.123537] imx6_pm_common_init: No DDR LPM support with suspend -19! , which break suspend/resume on imx6q/dl. Revert the offeding commit to avoid the regression. Thanks to Tim Harvey for bisecting this problem. Cc: stable@vger.kernel.org Fixes: cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and EverestEddie James3-0/+50
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and Everest systems and add an iio-hwmon node for the 7th channel to report the battery voltage. Tested on Rainier: ~# cat /sys/class/hwmon/hwmon11/in1_input 1347 Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line B6Ben Tyner1-1/+1
gpio-line-names B6 set to checkstop Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-4-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line Q2Ben Tyner1-1/+1
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-3-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: rainier: Define name for gpio line Q2Ben Tyner1-1/+1
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-2-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: imx7d-sdb: Fix the SPI chipselect polarityFabio Estevam1-1/+1
The following warning is seen when the SPI GPIO driver probes: gpio-expander@0 enforce active low on chipselect handle The reason for this warning is clearly explained in the comments inside drivers/gpio/gpiolib-of.c: * SPI children have active low chip selects * by default. This can be specified negatively * by just omitting "spi-cs-high" in the * device node, or actively by tagging on * GPIO_ACTIVE_LOW as flag in the device * tree. If the line is simultaneously * tagged as active low in the device tree * and has the "spi-cs-high" set, we get a * conflict and the "spi-cs-high" flag will * take precedence. To properly represent the SPI chipselect polarity, change it to active-low when the "spi-cs-high" property is absent. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6qdl-tqma6: Fix the SPI chipselect polarityFabio Estevam1-1/+1
The conversion of the spi-imx driver to use GPIO descriptors in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors") helped to detect the following SPI chipselect polarity mismatch on an imx6q-sabresd for example: [ 4.854337] m25p80@0 enforce active low on chipselect handle Prior to the above commit, the chipselect polarity passed via cs-gpios property was ignored and considered active-low. The reason for such mismatch is clearly explained in the comments inside drivers/gpio/gpiolib-of.c: * SPI children have active low chip selects * by default. This can be specified negatively * by just omitting "spi-cs-high" in the * device node, or actively by tagging on * GPIO_ACTIVE_LOW as flag in the device * tree. If the line is simultaneously * tagged as active low in the device tree * and has the "spi-cs-high" set, we get a * conflict and the "spi-cs-high" flag will * take precedence. To properly represent the SPI chipselect polarity, change it to active-low when the "spi-cs-high" property is absent. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6qp-prtwd3: Fix the SPI chipselect polarityFabio Estevam1-2/+2
The conversion of the spi-imx driver to use GPIO descriptors in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors") helped to detect the following SPI chipselect polarity mismatch on an imx6q-sabresd for example: [ 4.854337] m25p80@0 enforce active low on chipselect handle Prior to the above commit, the chipselect polarity passed via cs-gpios property was ignored and considered active-low. The reason for such mismatch is clearly explained in the comments inside drivers/gpio/gpiolib-of.c: * SPI children have active low chip selects * by default. This can be specified negatively * by just omitting "spi-cs-high" in the * device node, or actively by tagging on * GPIO_ACTIVE_LOW as flag in the device * tree. If the line is simultaneously * tagged as active low in the device tree * and has the "spi-cs-high" set, we get a * conflict and the "spi-cs-high" flag will * take precedence. To properly represent the SPI chipselect polarity, change it to active-low when the "spi-cs-high" property is absent. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6dl-alti6p: Fix the SPI chipselect polarityFabio Estevam1-1/+1
The conversion of the spi-imx driver to use GPIO descriptors in commit 8cdcd8aeee28 ("spi: imx/fsl-lpspi: Convert to GPIO descriptors") helped to detect the following SPI chipselect polarity mismatch on an imx6q-sabresd for example: [ 4.854337] m25p80@0 enforce active low on chipselect handle Prior to the above commit, the chipselect polarity passed via cs-gpios property was ignored and considered active-low. The reason for such mismatch is clearly explained in the comments inside drivers/gpio/gpiolib-of.c: * SPI children have active low chip selects * by default. This can be specified negatively * by just omitting "spi-cs-high" in the * device node, or actively by tagging on * GPIO_ACTIVE_LOW as flag in the device * tree. If the line is simultaneously * tagged as active low in the device tree * and has the "spi-cs-high" set, we get a * conflict and the "spi-cs-high" flag will * take precedence. To properly represent the SPI chipselect polarity, change it to active-low when the "spi-cs-high" property is absent. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6dl-yapp4: Remove the unused white LED channelMichal Vokáč1-8/+0
Since the reg property was added to each channel node in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") it is possible to skip unused channels. Remove the actually unused white LED channel. Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probeMichal Vokáč1-0/+5
Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: <stable@vger.kernel.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-21arm: qcom: Add SMP support for MSM8226Bartosz Dudziak1-0/+71
Implement support for Cortex-A7 CPU release sequence in MSM8226 SoC. Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210606201612.100752-3-bartosz.dudziak@snejp.pl Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-09-21ARM: BCM53016: MR32: get mac-address from nvmemChristian Lamparter1-0/+11
The MAC-Address of the MR32's sole ethernet port is located in offset 0x66 of the attached AT24C64 eeprom. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21ARM: BCM53016: Specify switch ports for Meraki MR32Christian Lamparter1-0/+22
the switch identifies itself as a BCM53012 (rev 5)... This patch has been tested & verified on OpenWrt's snapshot with Linux 5.10 (didn't test any older kernels). The MR32 is able to "talk to the network" as before with OpenWrt's SWITCHDEV b53 driver. | b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5 | libphy: dsa slave smi: probed | b53-srab-switch 18007000.ethernet-switch poe (uninitialized): | PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL) | b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. | Please migrate to PHYLINK! | DSA: tree 0 setup Reported-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21ARM: dts: BCM53573: Add Tenda AC9 switch portsRafał Miłecki1-0/+37
This router has 1 WAN and 4 LAN ports. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switchRafał Miłecki1-0/+18
BCM53573 family SoC have Ethernet switch connected to the first Ethernet controller (accessible over MDIO). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2021-09-21ARM: dts: mediatek: Update MT7629 PCIe node for new formatChuanjia Liu2-25/+23
To match the new dts binding. Remove "subsys",unused interrupt and slot node.Add "interrupt-names", "linux,pci-domain" and pciecfg node. Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20210823032800.1660-7-chuanjia.liu@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-21ARM: dts: ux500: Skomer eMMC needs 300 ms power onLinus Walleij1-1/+5
The partitions on the eMMC will not even appear sometimes, in the datasheet for the Samsung KLMxGxxE4x we find that the power-on time for a 4GB eMMC of this type is 300 ms and nowadays the block stack is so fast so we are stressing it, and we need to specify that we need this delay in the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-21ARM: dts: ux500: Fix up SD card pin configLinus Walleij1-15/+5
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-21ARM: dts: ux500: Skomer regulator fixesLinus Walleij1-4/+4
AUX2 has slightly wrong voltage and AUX5 doesn't need to be always on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-21ARM: OMAP2+: Drop old unused omap5_uevm_legacy_init()Tony Lindgren1-9/+0
This is no longer needed, the function does nothing nowadays. Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-09-21ARM: at91: dts: sama5d29: Add dtsi file for sama5d29Hari Prasath1-0/+16
A new dtsi file for sama5d29 SoC is added which basically inherits the sama5d2 dtsi with the mac controller compatible property updated. Signed-off-by: Hari Prasath <Hari.PrasathGE@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210812140758.28273-1-Hari.PrasathGE@microchip.com
2021-09-21ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery supportDurai Manickam KR1-2/+20
SDA and SCL is configured as GPIO for I2C bus to recover during I2C bus malfunction. Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210921064344.889304-1-durai.manickamkr@microchip.com
2021-09-21ARM: dts: at91: tse850: the emac<->phy interface is rmiiPeter Rosin1-1/+1
This went unnoticed until commit 7897b071ac3b ("net: macb: convert to phylink") which tickled the problem. The sama5d3 emac has never been capable of rgmii, and it all just happened to work before that commit. Fixes: 21dd0ece34c2 ("ARM: dts: at91: add devicetree for the Axentia TSE-850") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/ea781f5e-422f-6cbf-3cf4-d5a7bac9392d@axentia.se
2021-09-20ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDPDouglas Anderson15-0/+15
In the patch ("drm/panel-simple-edp: Split eDP panels out of panel-simple") we will split the PANEL_SIMPLE driver in two. By default let's give everyone who had the old driver enabled the new driver too. If folks want to opt-out of one or the other they always can later. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid
2021-09-20ARM: dts: rockchip: swap timer clock-namesJohan Jonker3-6/+6
With the conversion of rockchip,rk-timer.yaml the clock-names order was set to "pclk", "timer", but nothing was fixed in the ARM dts section of the mainline kernel, so the swap timer clock-names that don't fit. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828102659.7348-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: add more angle brackets to operating-points property on rk3066aJohan Jonker1-9/+8
After the conversion to YAML of the Operating Performance Points(OPP) binding the operating-points property expects values in a uint32-matrix with 2 items, so fix the notifications by adding angle brackets. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v1.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828091233.19992-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: rename opp-table node namesJohan Jonker5-6/+6
After the conversion to YAML of the Operating Performance Points(OPP) binding the operating-points-v2 property expects the nodename to have the '^opp-table(-[a-z0-9]+)?$' format, so rename all Rockchip ARM dts opp-table node names. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/opp/opp-v2.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828094512.26862-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: change rv1108 gmac nodenameJohan Jonker1-1/+1
The rv1108 gmac node is checked with rockchip-dwmac.yaml, snps,dwmac.yaml and ethernet-controller.yaml. The nodename should have a pattern: "^ethernet(@.*)?$", so change to nodename. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828114240.12231-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20ARM: dts: rockchip: add adc-keys node to rk3066a-mk808Johan Jonker1-0/+27
The MK808 has a button inside the cover for the boot loader to do some action. Add the adc-keys node to the rk3066a-mk808.dts file. The rk3066 has a higher maximum DC supply voltage for the analog part of SAR-ADC VDDA_SARADC of 2.75V then other Rockchip SoCs. For the "rockchip,saradc" node is a vref-supply property required, so add a regulator for it as well. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Link: https://lore.kernel.org/r/20210828092755.24560-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-09-20arm: dts: mt7623: add otg nodes for bpi-r2Frank Wunderlich1-0/+25
Add OTG-Nodes for BananaPi-R2 Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210830145958.108605-1-linux@fw-web.de Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-20arm: dts: mt7623: add musb device nodesSungbo Eo2-0/+37
MT7623 has an musb controller that is compatible with the one from MT2701. Signed-off-by: Sungbo Eo <mans0n@gorani.run> Tested-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210830155903.13907-2-mans0n@gorani.run Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-09-20ARM: dts: rza2mevb: Add I2C EEPROM supportGeert Uytterhoeven1-0/+19
Enable the third I2C channel, and describe the I2C EEPROM connected to it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/786f0354fb30b183d5bccb2f12b13e6535b9ace1.1626267234.git.geert+renesas@glider.be
2021-09-20ARM: s3c: Use strscpy to replace strlcpyJason Wang1-1/+1
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20210906134656.101088-1-wangborong@cdjrlc.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-09-20ARM: stm32: add initial support for STM32MP13 familyAlexandre Torgue2-0/+11
This patch adds initial support of STM32MP13 microprocessor family based on Arm Cortex-A7. New Cortex-A infrastructure (gic, timer,...) are selected if ARCH_MULTI_V7 is defined. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2021-09-19ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHYMarijn Suijten1-2/+2
According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
2021-09-19ARM: dts: qcom: fill secondary compatible for multiple boardsDavid Heidelberg5-5/+5
To comply with device-tree definition. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909060343.9665-1-david@ixit.cz
2021-09-19ARM: dts: qcom: apq8064: adjust memory node according to specsDavid Heidelberg1-1/+1
Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210908172544.55666-1-david@ixit.cz
2021-09-19ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2David Heidelberg1-6/+10
APQ8064 was last user of gpu-pwrlevels inside mainline tree, so convert it now. Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829133918.57780-3-david@ixit.cz
2021-09-19ARM: dts: qcom: apq8064: update Adreno clock namesDavid Heidelberg1-4/+4
The legacy clock names (including the _clk suffix) was dropped from the driver, so update the dts accordingly). Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
2021-09-17arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodesRob Herring6-44/+26
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as 'simple-bus' child nodes must have a unit-address. The 'ranges' handling is also wrong (or at least strange) as the mapping of SMC chip selects should be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus' node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges' should be moved down a level. The latter change is more simple, so let's do that. As the 'ranges' value doesn't vary for a given motherboard instance, we can move 'ranges' into the motherboard dtsi files. Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-16ARM: config: multi v7: Regenerate defconifgJoel Stanley1-28/+28
These options have moved around when generating the defconfig. Update them to reduce noise when generating future changes. The exceptions are: - NEW_LEDS and LEDS_TRIGGERS which should drop out as they are selected by SND_CTL_LED. Instead we will improve the logic so SND_CTL_LED doesn't force-enable the subsystem. - The SPI_AX88796C network device. This was enabled in v5.11 for Exynos boards. The driver is not yet merged but there's work being done, so leave it alone for now. - PTP_1588_CLOCK is implied by enabled drivers STMMAC_ETH, IGB, E1000E and FEC, but this may be changed in the future as imply does not do what it was originally intended to do. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-7-joel@jms.id.au
2021-09-16ARM: config: multi v7: Add renamed symbolsJoel Stanley1-3/+2
These options were renamed in recent times. Add the new name so the driver is built again, and drop the old name. POWER_AVS was renamed POWER_AVS_OMAP in commit bca815d62054 ("PM: AVS: smartreflex Move driver to soc specific drivers"). Add the new symbol. QCOM_PM became ARM_QCOM_SPM_CPUIDLE in commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver"). SND_MMP_SOC became CONFIG_SND_MMP_SOC_SSPA in commit a97e384ba78f ("ASoC: mmp-sspa: Add Device Tree support"). Enable that instead. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-4-joel@jms.id.au
2021-09-16ARM: config: multi v7: Clean up enabled by default optionsJoel Stanley1-19/+0
A number of options in the defconfig are enabled by other options; either through selects or defaults. SECCOMP is on by default as of commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig"). NET_SWITCHDEV is enabled by NET_DSA. I think this is a result of commit 227d72063fcc ("dsa: simplify Kconfig symbols and dependencies"). SIMPLE_PM_BUS is selected ARCH_OMAP2PLUS as of commit 2a39af3870e9 ("ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus"). MICREL_PHY is selected by the ks8851 ethernet driver as of f0791b92d2b6 ("net: ks8851: Select PHYLIB and MICREL_PHY in Kconfig"). SMSC_PHY is selected by USB_NET_SMSC95XX as of commit 05b35e7eb9a1 ("smsc95xx: add phylib support"). STMPE_I2C is default y. It was explicitly added to the defconfig in commit d8f0ddc83877 ("ARM: defconfig: add STMPE ADC driver for P4 Note") but it's not required. CLK_ACTIONS and CLK_OWL_S500 was explicitly added in commit 26ba4a474aec ("ARM: multi_v7_defconfig: Enable Actions Semi platform and drivers"), but it defaults on when ARCH_ACTIONS is enabled. Drop them. CROS_EC_CHARDEV defaults to MFD_CROS_EC_DEV, which defaults to CROS_EC since commit 2fa2b980e3fe ("mfd / platform: cros_ec: Rename config to a better name"). TEGRA20_APB_DMA is selected by SOC_TEGRA_FUSE if ARCH_TEGRA_2x_SOC since commit 19d41e5e9c68 ("soc/tegra: fuse: Add APB DMA dependency for Tegra20"). USB_CHIPIDEA_TEGRA is enabled when USB_CHIPIDEA is enabled. It falls out of the defconfig but is enabled, as intended by d50229cee69b ("ARM: multi_v7_defconfig: Stop using deprecated USB_EHCI_TEGRA"). SERIAL_OWL_CONSOLE defaults to on when SERIAL_OWL=y, and has since it was introduced. Commit c6774ee035dc ("media: Kconfig: make filtering devices optional") made MEDIA_PLATFORM_SUPPORT, MEDIA_CAMERA_SUPPORT and MEDIA_CEC_SUPPORT default y if MEDIA_SUPPORT_FILTER is disabled, so they fall out of the defconfig. MEDIA_CONTROLLER is selected by a number of drivers in the config, and additionally defaults to MEDIA_PLATFORM_SUPPORT which is enabled. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-3-joel@jms.id.au
2021-09-16ARM: config: multi v7: Drop unavailable optionsJoel Stanley1-7/+0
SIRF was removed in commit f3a732843acc ("ARM: remove sirf prima2/atlas platforms"). This covers ARCH_SIRF, SERIAL_SIRFSOC, SERIAL_SIRFSOC_CONSOLE, I2C_SIRF, SPI_SIRF. EVI_VARS was made x86 only in commit 963fabf37f6a ("efi: efivars: limit availability to X86 builds"). Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210615011435.518115-2-joel@jms.id.au
2021-09-15ARM: dts: at91: add Exegin Q5xR5 boardOwen Kirby2-0/+200
Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with the addition of this patch there will be no need to maintain it separatelly in OpenWrt. [osk: original author of patch in OpenWrt] [claudiu.beznea: use "&<label> {" syntax, sorted nodes in alphabetical order, adapted flash to new support in kernel 5.14, use proper compatibles according to kernel 5.14, use macros instead of hardcoded numbers for pinctrl phandles and for all pinctrl references, add pinctrl-names, pinctrl-X where necessaray] Signed-off-by: Owen Kirby <osk@exegin.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210816064416.1630674-8-claudiu.beznea@microchip.com
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.