aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08ARM: dts: aspeed: everest: Add I2C componentsPriyanga Ramasamy1-0/+408
Tested and able to bound the devices with i2c driver. Signed-off-by: Priyanga Ramasamy <priyanga24@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-13-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier 4U: Fix fan configurationEddie James1-0/+14
The 4U fans didn't have the correct properties since the fan nodes were redefined. Fix this by referencing each fan individually and adding the differences to the 4U fans. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add missing fan nodesJoel Stanley1-0/+12
The Maxim fan controller has six fans attached. Two of these were missing from the description. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Enable fan watchdogEddie James1-0/+14
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT pin of the MAX31785, resulting in fans running at full speed, if at any point the BMC stops pulsing it, such as a BMC reboot at runtime. Enable watchdog 2 for BMC reboots. Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add presence GPIOsAlpana Kumari1-8/+248
This commit adds presence detect GPIO chips for various FRUs on Rainier. Also, correct the I2C address for the tca9554. Signed-off-by: Alpana Kumari <alpankum@in.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add additional processor CFAMsEddie James1-2/+281
Rainier has two dual-chip modules and therefore four CFAMs with their associated engines. Add these to the devicetree with the i2c busses that have devices on them. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add gpio-keys-polled for fansBrandon Wyman1-0/+43
Add a gpio-keys-polled section to the Rainier device tree for the fan presence signals on the PCA9552 I2C device on bus 7. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Matthew Barth <msbarth@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: rainier: Add directly controlled LEDsVishwanatha Subbanna1-2/+26
These LEDs are directly connected to the BMC's GPIO bank. Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-08ARM: dts: aspeed: Add ASRock E3C246D4I BMCZev Weiss2-0/+203
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series mini-ITX board that we hope can provide a decent platform for OpenBMC development. This initial device-tree provides the necessary configuration for basic BMC functionality such as host power control, serial console and KVM support, and POST code snooping. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-07ARM: dts: mvebu: Add device tree for ATL-x530 BoardAryan Srivastava2-0/+236
Add device tree file for x530 board. This has an Armada 385 SoC. Has NAND-flash for user storage and SPI for booting. Covers majority of x530 and GS980MX variants. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-07Merge tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann11-12/+21
AT91 dt for 5.13: - two little fixes (typo, W=1) - a change in gpio button keycode for recent boards * tag 'at91-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: add ETB and ETM unit name ARM: dts: at91: change the key code of the gpio key ARM: dts: at91: Fix a typo Link: https://lore.kernel.org/r/20210407114415.13180-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann12-54/+110
Samsung DTS ARM changes for v5.13 1. Configure battery charger and front camera on GT-I9100 phone. 2. Fix in several boards the Maxim PMIC/MUIC/fuel gauge interrupt flags to match real type of interrupt coming from the device. 3. Correct DTS with dtschema. This brings back the commit adding input clock to CMU in Exynos4412 Odroid which was reverted some time ago due to unsupported deferred probes (now supported and tested). * tag 'samsung-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add front camera support to I9100 ARM: dts: exynos: white-space cleanups ARM: dts: exynos: replace deprecated NTC/Murata compatibles ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family ARM: dts: exynos: correct PMIC interrupt trigger level on Snow ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250 ARM: dts: exynos: correct PMIC interrupt trigger level on P4 Note family ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family ARM: dts: exynos: correct fuel gauge interrupt trigger level on P4 Note family ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100 ARM: dts: exynos: add charger supply for I9100 Link: https://lore.kernel.org/r/20210407065828.7213-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtArnd Bergmann5-313/+506
Devicetree changes for omaps for v5.13 Mostly configures addtional devices for various boards, and updates the gpio line names for beagle boards so userspace can optionally find the right lines: - Use unique gpio line names for am335x-pocketbeagle - Update omap3-echo led configuration and add ath6kl node - Fix indentation for am3 tscadc node - Prepare motorola-cpcap-mapphone for power supply dtbs_check_parsing - Use unique gpio line names for am335x-boneblack.dts * tag 'omap-for-v5.13/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack.dts: unique gpio-line-names ARM: dts: motorola-cpcap-mapphone: Prepare for dtbs_check parsing ARM: dts: am33xx-l4: fix tscadc@0 node indentation ARM: dts: omap3-echo: Add ath6kl node ARM: dts: omap3-echo: Update LED configuration ARM: dts: am335x-pocketbeagle: unique gpio-line-names Link: https://lore.kernel.org/r/pull-1617703816-65652@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add an empty chosen node to top level DTSIAlexander Shiyan1-0/+2
Missing "chosen" node can cause issues when booting a kernel with a boot-loader that doesn't create a chosen node if this isn't present in the DTB since the decompressor relies on a pre-existing chosen node to be available to insert the command line and merge other ATAGS info. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-5-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: edb7211: Add unit-address to memory nodeAlexander Shiyan1-1/+1
The memory node requires a unit-address, add it. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-4-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Fix serial port namesAlexander Shiyan1-2/+2
Preferred node name for serial ports is "serial". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-3-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add keypad nodeAlexander Shiyan1-0/+7
This adds missing keypad node to basic clps711x DT. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-2-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: clps711x: Add SYSCON nodes where it is usedAlexander Shiyan1-0/+4
This patch adds SYSCON descriptors to framebuffer, SPI, DAI and modem control GPIO nodes to further rework these drivers to remove the call to the syscon_regmap_lookup_by_compatible() function. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Link: https://lore.kernel.org/r/20210405051658.26779-1-shc_work@mail.ru' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann25-25/+327
Our usual bunch of patches to support the Allwinner SoCs, this time adding: - New secondary interrupt controller binding to support the wake-up - Use the RSB bus instead of I2C for the PMIC on the H6 - HDMI support for the BananaPi M2-Zero - New board: Topwise A721 * tag 'sunxi-dt-for-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: h3: beelink-x2: Add power button arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection ARM: dts: sunxi: h2-plus-bananapi-m2-zero: Add HDMI out ARM: dts: sun4i: Add support for Topwise A721 tablet dt-bindings: arm: Add Topwise A721 arm64: dts: allwinner: Move wakeup-capable IRQs to r_intc arm64: dts: allwinner: Use the new r_intc binding ARM: dts: sunxi: Move wakeup-capable IRQs to r_intc ARM: dts: sunxi: h3/h5: Add r_intc node ARM: dts: sunxi: Use the new r_intc binding Link: https://lore.kernel.org/r/8a3e3271-bebe-4d27-a9e7-7b7a6311a38d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07Merge tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann1-0/+8
Renesas ARM DT updates for v5.13 (take two) - Video IN (VIN) and Camera (CSI-2) support for the R-Car M3-W+ SoC, - LED support for the Falcon development board, - Preparatory display pipeline support for the R-Car V3U SoC, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.13-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb: Add cpu-supply property to a57_0 node arm64: dts: renesas: salvator-common: Add cpu-supply property to a57_0 node arm64: dts: renesas: r8a77950: Drop operating points above 1.5 GHz arm64: dts: renesas: r8a779a0: Fix PMU interrupt arm64: dts: renesas: r8a779a0: Add VSPD support arm64: dts: renesas: r8a779a0: Add FCPVD support arm64: dts: renesas: falcon-cpu: Add GP LEDs arm64: dts: renesas: r8a77961: Add VIN and CSI-2 device nodes ARM: dts: koelsch: Configure pull-up for SOFT_SW GPIO keys arm64: dts: renesas: falcon: Move AVB0 to main DTS arm64: dts: renesas: falcon: Move watchdog config to CPU board DTS arm64: dts: renesas: falcon: Move console config to CPU board DTS Link: https://lore.kernel.org/r/cover.1617359678.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-07ARM: dts: at91: sama5d2: add ETB and ETM unit nameNicolas Ferre1-2/+2
Add unit address to the ETB and ETM nodes. It also allow us to get rid of the warnings: ../arch/arm/boot/dts/sama5d2.dtsi:43.6-57.4: Warning (unit_address_vs_reg): /etb: node has a reg or ranges property, but no unit name ../arch/arm/boot/dts/sama5d2.dtsi:59.6-73.4: Warning (unit_address_vs_reg): /etm: node has a reg or ranges property, but no unit name when we compile with W=1. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402170139.140595-1-nicolas.ferre@microchip.com
2021-04-07ARM: dts: at91: change the key code of the gpio keyLudovic Desroches9-9/+18
Having a button code and not a key code causes issues with libinput. udev won't set ID_INPUT_KEY. If it is forced, then it causes a bug within libinput. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210402130227.21478-1-nicolas.ferre@microchip.com
2021-04-06Merge tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixesArnd Bergmann1-1/+3
mvebu fixes for 5.12 (part 1) 2 fixes on on turris-omnia (Armada 38x based:) - Fix storm interrupt - Enable hardware buffer management as it should be Unbreak AHCI on all Marvell Armada 7k8k / CN913x platforms * tag 'mvebu-fixes-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin ARM: dts: turris-omnia: fix hardware buffer management Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts" Link: https://lore.kernel.org/r/87a6qgctit.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-06ARM: exynos: correct kernel doc in platsmpKrzysztof Kozlowski1-15/+13
Correct few kerneldoc issues, including W=1 compile warning: arch/arm/mach-exynos/platsmp.c:89: warning: expecting prototype for exynos_core_power_down(). Prototype was for exynos_cpu_power_down() instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210405181605.52612-1-krzysztof.kozlowski@canonical.com
2021-04-06ARM: dts: qcom: msm8974-klte: Add bluetooth supportAlexey Minnekhanov1-0/+50
Broadcom BCM4354 is used on Samsung Galaxy S5 phone on BLSP2 UART8 bus. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-2-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-06ARM: dts: qcom: msm8974: add blsp2_uart8Alexey Minnekhanov1-0/+9
Add blsp2_uart8 node in order to support bluetooth on the Samsung Galaxy S5 phone. Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org> Link: https://lore.kernel.org/r/20210406140551.3328241-1-alexeymin@postmarketos.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-05Merge 5.12-rc6 into tty-nextGreg Kroah-Hartman15-96/+104
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-05Merge 5.12-rc6 into usb-nextGreg Kroah-Hartman15-96/+104
We want the USB fixes in here as well and it resolves a merge issue with xhci-mtk.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-04ARM: dts: qcom: msm8974-samsung-klte: correct fuel gauge interrupt trigger levelKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: da8d46992e67 ("ARM: dts: qcom: msm8974-klte: Add fuel gauge") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Iskren Chernev <iskren.chernev@gmail.com> Tested-By: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210303182816.137255-2-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04ARM: dts: qcom: msm8974-lge-nexus5: correct fuel gauge interrupt trigger levelKrzysztof Kozlowski1-1/+1
The Maxim fuel gauge datasheets describe the interrupt line as active low with a requirement of acknowledge from the CPU. The falling edge interrupt will mostly work but it's not correct. Fixes: 45dfa741df86 ("ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20210303182816.137255-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-04ARM: dts: qcom: msm8974-hammerhead: add mount matrix for IMULuca Weiss1-0/+4
Configure the mount matrix to account for the sensor placement on the board. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210403105902.1867344-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-04-02ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pinMarek Behún1-0/+1
Use the `marvell,reg-init` DT property to configure the LED[2]/INTn pin of the Marvell 88E1514 ethernet PHY on Turris Omnia into interrupt mode. Without this the pin is by default in LED[2] mode, and the Marvell PHY driver configures LED[2] into "On - Link, Blink - Activity" mode. This fixes the issue where the pca9538 GPIO/interrupt controller (which can't mask interrupts in HW) received too many interrupts and after a time started ignoring the interrupt with error message: IRQ 71: nobody cared There is a work in progress to have the Marvell PHY driver support parsing PHY LED nodes from OF and registering the LEDs as Linux LED class devices. Once this is done the PHY driver can also automatically set the pin into INTn mode if it does not find LED[2] in OF. Until then, though, we fix this via `marvell,reg-init` DT property. Signed-off-by: Marek Behún <kabel@kernel.org> Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia") Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <stable@vger.kernel.org> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02ARM: dts: turris-omnia: fix hardware buffer managementRui Salvaterra1-1/+2
Hardware buffer management has never worked on the Turris Omnia, as the required MBus window hadn't been reserved. Fix thusly. Fixes: 018b88eee1a2 ("ARM: dts: turris-omnia: enable HW buffer management") Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Marek Behún <kabel@kernel.org> Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-04-02ARM: dts: at91: Fix a typoBhaskar Chowdhury1-1/+1
s/conlicts/conflicts/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20210318095237.28436-1-unixbhaskar@gmail.com
2021-04-02ARM: hisi: use the correct HiSilicon copyrightHao Fang4-5/+5
s/Hisilicon/HiSilicon/ It should use capital S, according to https://www.hisilicon.com/en/terms-of-use. Signed-off-by: Hao Fang <fanghao11@huawei.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2021-04-02crypto: poly1305 - fix poly1305_core_setkey() declarationArnd Bergmann1-1/+1
gcc-11 points out a mismatch between the declaration and the definition of poly1305_core_setkey(): lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=] 13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16]) | ~~~~~~~~~^~~~~~~~~~~ In file included from lib/crypto/poly1305-donna32.c:11: include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’} 21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key); This is harmless in principle, as the calling conventions are the same, but the more specific prototype allows better type checking in the caller. Change the declaration to match the actual function definition. The poly1305_simd_init() is a bit suspicious here, as it previously had a 32-byte argument type, but looks like it needs to take the 16-byte POLY1305_BLOCK_SIZE array instead. Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-01Merge tag 'at91-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfigArnd Bergmann2-23/+33
AT91 defconfig for 5.13: - aligment with recent kernel for sama5_defconfig - move of 2 options to built-in - addition of useful modules for validation and CI - addition of Hantro G1 VPU from staging * tag 'at91-defconfig-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: Modernize UBI defconfig part ARM: configs: at91: Add USB Video webcam class ARM: configs: at91: Add mtd tests as modules ARM: configs: at91: sama5: Add audio MIKROE PROTO board ARM: configs: at91: sama5: Enable LAN78XX as module ARM: configs: at91: sama5: PIOBU as built-in ARM: configs: at91: sama5: MCP16502 regulator as built-in ARM: configs: at91: sama5: enable the Hantro G1 engine ARM: configs: at91: sama5: update with savedefconfig Link: https://lore.kernel.org/r/20210401162207.29299-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: configs: Remove REGULATOR_USERSPACE_CONSUMERMark Brown3-3/+0
The userspace consumer is a development tool, not intended for producton systems and so should not be present in defconfigs especially not those for specific machines so is not a good fit for defconfig, remove it from those defconfigs where it is enabled. No system in mainline actually instantiates one. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20210401102858.4095-1-broonie@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: configs: ux500: Update for new driversLinus Walleij1-0/+14
Some new driver support for the Ux500 devices landed in v5.12-rc1 so update the defconfig to use them: - TM2 touchkey, used on the Golden and Janice. - SPI GPIO, used for the Janice display control. - NTC thermistor, used for the HREF temperature sensors. - V4L2 flash control that gives support for LED torch to userspaces such as Phosh. - The LEDs Flash class and RT8515 Flash/torch LED driver used in all the Samsung mobiles. - FSA9480 extcon, used by Janice. - BMC150 accelerometer, used by Janice. - IIO rescaler, used for thermistors and ALS on Janice. - MPU3050 gyroscope driver used by Janice. - Yamaha YAS530 magnetometer driver used by Janice. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210301232050.1457397-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'at91-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/socArnd Bergmann1-11/+8
AT91 soc for 5.13: - Fixing a W=1 warning * tag 'at91-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: pm: Move prototypes to mutually included header Link: https://lore.kernel.org/r/20210401174544.32193-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'imx-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/socArnd Bergmann2-2/+2
i.MX SoC update for 5.13: - A couple of typo fixes on help text and comment. * tag 'imx-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Kconfig: Fix typo in help ARM: mach-imx: Fix a spelling in the file pm-imx5.c Link: https://lore.kernel.org/r/20210331041019.31345-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'omap-for-v5.13/genpd-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/socArnd Bergmann20-2399/+644
Drop legacy data for dra7 and omap4/5 for genpd support for v5.13 Similar to what we have already done for am3 and 4, we can now boot dra7, omap4, and omap5 with devicetree data and genpd without legacy SoC specific built-in data. Let's drop the legacy data for these SoCs, and the related "ti,hwmods" custom devicetree property. As with these changes we now expect to have complete devicetree data, let's also warn in the case if an old devicetree data is noticed. And with the warning provided, there should not be any need to delay dropping the legacy data as it just unnecessarily complicates things. The main reasons for dropping the legacy data is to avoid the burden of maintaining a mixed boot process where both legacy built-in data and devicetree data are needed. And we can now use standard reset driver, genpd, and simple-pm-bus features. These patches are based on the related devicetree changes to add the missing interconnect target module configuration for these SoCs. * tag 'omap-for-v5.13/genpd-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (87 commits) bus: ti-sysc: Warn about old dtb for dra7 and omap4/5 ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5 ARM: OMAP2+: Drop legacy platform data for omap5 hwmod ARM: OMAP2+: Drop legacy platform data for omap5 l3 ARM: OMAP2+: Drop legacy platform data for omap5 l4_cfg ARM: OMAP2+: Drop legacy platform data for omap5 l4_per ARM: OMAP2+: Drop legacy platform data for omap5 l4_wkup ARM: OMAP2+: Drop legacy platform data for omap5 sata ARM: OMAP2+: Drop legacy platform data for omap5 mpu ARM: OMAP2+: Drop legacy platform data for omap5 emif ARM: OMAP2+: Drop legacy platform data for omap5 dmm ARM: dts: Configure simple-pm-bus for omap5 l3 ARM: dts: Configure simple-pm-bus for omap5 l4_cfg ARM: dts: Configure simple-pm-bus for omap5 l4_per ARM: dts: Configure simple-pm-bus for omap5 l4_wkup ARM: dts: Move omap5 l3-noc to a separate node ARM: dts: Move omap5 mmio-sram out of l3 interconnect ARM: dts: Configure interconnect target module for omap5 sata ARM: dts: Configure interconnect target module for omap5 gpmc ARM: dts: Configure interconnect target module for omap5 mpu ... Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01ARM: ux500: make ux500_cpu_die staticBen Dooks1-1/+1
The ux500_cpu_die function is not exported so make it static to avoid the following warning: arch/arm/mach-ux500/platsmp.c:89:6: warning: symbol 'ux500_cpu_die' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210323083203.1646842-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/driversArnd Bergmann7-10/+10
SoCFPGA updates for v5.13 - Patches from Krzysztof Kozlowski the cleans up and consolidate support for SoCFPGA platforms - Rename ARCH_SOCFPGA into ARCH_INTEL_SOCFPGA - Consolidate ARCH_STRATIX10 into ARCH_INTEL_SOCFPGA - Consolidate ARCH_AGILEX into ARCH_INTEL_SOCFPGA - Consolidate ARCH_N5X into ARCH_INTEL_SOCFPGA * tag 'socfpga_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: drop ARCH_SOCFPGA reset: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs i2c: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs fpga: altera: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs dmaengine: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs clk: socfpga: use ARCH_INTEL_SOCFPGA also for 32-bit ARM SoCs (and compile test) clk: socfpga: allow compile testing of Stratix 10 / Agilex clocks arm64: socfpga: merge Agilex and N5X into ARCH_INTEL_SOCFPGA EDAC: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10 clk: socfpga: merge ARCH_SOCFPGA and ARCH_STRATIX10 clk: socfpga: build together Stratix 10, Agilex and N5X clock drivers net: stmmac: merge ARCH_SOCFPGA and ARCH_STRATIX10 mfd: altera: merge ARCH_SOCFPGA and ARCH_STRATIX10 ARM: socfpga: introduce common ARCH_INTEL_SOCFPGA clk: socfpga: allow building N5X clocks with ARCH_N5X Link: https://lore.kernel.org/r/20210330110430.558182-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'v5.12-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dtArnd Bergmann5-27/+35
- fix dtbs_check warnings - enable SMP for mt6589 * tag 'v5.12-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: mediatek: dts: activate SMP for mt6589 arm: dts: mt2701: harmonize node names and compatibles arm: dts: mt7623: harmonize node names and compatibles arm: dts: mt7629: harmonize node names and compatibles Link: https://lore.kernel.org/r/be262120-6cd9-87a7-ccc3-f5c403cff66b@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann16-84/+204
ARM: tegra: Device tree changes for v5.13-rc1 This contains a couple of improvements and fixes for various 32-bit Tegra-based boards. * tag 'tegra-for-5.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: acer-a500: Add atmel,wakeup-method property ARM: tegra: Specify tps65911 as wakeup source ARM: tegra: Specify memory suspend OPP in device-tree ARM: tegra: Specify CPU suspend OPP in device-tree ARM: tegra: ouya: Specify all CPU cores as cooling devices ARM: tegra: nexus7: Specify all CPU cores as cooling devices ARM: tegra: acer-a500: Rename avdd to vdda of touchscreen node ARM: tegra: acer-a500: Specify all CPU cores as cooling devices ARM: tegra: acer-a500: Reduce thermal throttling hysteresis to 0.2C ARM: tegra: acer-a500: Enable core voltage scaling ARM: tegra: paz00: Enable full voltage scaling ranges for CPU and Core domains ARM: tegra: cardhu: Support CPU thermal throttling ARM: tegra: cardhu: Support CPU frequency and voltage scaling on all board variants ARM: tegra: ventana: Support CPU thermal throttling ARM: tegra: ventana: Support CPU and Core voltage scaling Link: https://lore.kernel.org/r/20210401172622.3352990-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dtArnd Bergmann25-325/+1493
STM32 DT updates for v5.13, round 1 Highlights: ---------- MCU part: -Add stm32h750 SoC support. It is based on stm32h743 and embeds crypto IPs and 2 ADC. -Add new art-pi board based on stm32h750. This board embeds: -8MB QSPI flash. -16MB SPI flash. -32MB SDRAM. -AP6212 combo (wifi/bt/fm). MPU part: -Use dedicated PTP clock for Ethernet controller on stm32mp151. -Enable i2c analog filter on stm32mp151. -DH: -Update GPIO names. -Enable crc1 & crryp1 on DHSOM. -Engicam: add new boards support: -MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash I2S. -MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM, Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT LVDS panel connector. -MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1 MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel and EDT DT5526 Touch) -i.Core STM32MP1 EDIMM SoM based on STM32MP157A. -C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive touch interface support based on i.Core STM32MP1 EDIMM SoM. It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector. -EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch, wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ... * tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits) ARM: dts: stm32: Add PTP clock to Ethernet controller ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM ARM: dts: stm32: Update GPIO line names on PicoITX ARM: dts: stm32: Update GPIO line names on DRC02 ARM: dts: stm32: Fill GPIO line names on AV96 ARM: dts: stm32: Fill GPIO line names on DHCOM SoM dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' ARM: stm32: Add a new SoC - STM32H750 ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: dts: stm32: fix i2c node typo in stm32h743 ARM: dts: stm32: add new instances for stm32h743 MCU ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dt-bindings: arm: stm32: Add compatible strings for ART-PI board Documentation: arm: stm32: Add stm32h750 value line doc ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151 ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 ... Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dtArnd Bergmann8-285/+419
Ux500 DTS changes for the v5.13 kernel cycle: - Fix up the WLAN on Janice - Fix the touchscreen on TVK R2 - Push down definitions to the UIBs instead of trying to share too much. - Bump the AUX1 voltage on the AB8500 so the touchscreen will work. - Define the CTTYSP touchscreen on the TVK R3. * tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIB ARM: dts: ux500: Bump AUX1 voltage ARM: dts: ux500: Clarify UIB version per board ARM: dts: ux500: Totally separate TVK R2 and R3 ARM: dts: ux500: Push TC35893 defines to each UIB ARM: dts: ux500: Fix up TVK R3 sensors ARM: dts: ux500: Push sensors to TVK R2 board ARM: dts: ux500: Move Synaptics to right include ARM: dts: ux500: Fix touchscreen on TVK R2 ARM: dts: ux500: Fix BT+WLAN on Janice Link: https://lore.kernel.org/r/CACRpkdanRQ6A85d=7vgpzbg-m3-yFcpQ4fuzrxZu3RJ0DrA2bQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann32-70/+270
i.MX device tree change for 5.13: - New board support: i.MX7D based reMarkable2. - Clean up imx6ql-pfla02 hog group by moving pins into corresponded client groups. - Add Netronix embedded controller for imx50-kobo-aura. - A series from Sebastian Reichel to improve GE Bx50v3 device trees. - Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA GPIOs. - Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards. - Various small and random device tree update. * tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits) ARM: dts: imx6: pbab01: Set USB OTG port to peripheral ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing ARM: imx7d-remarkable2: Initial device tree for reMarkable2 ARM: dts: imx7d-mba7: Remove unsupported PCI properties ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings ARM: dts: imx: bx50v3: Define GPIO line names ARM: dts: imx: bx50v3: i2c GPIOs are open drain ARM: dts: imx6q-ba16: improve PHY information ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO ARM: dts: ls1021a: mark crypto engine dma coherent ARM: dts: colibri-imx6ull: Change drive strength for usdhc2 ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53 ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller ... Link: https://lore.kernel.org/r/20210331041019.31345-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-01Merge tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux into arm/dtArnd Bergmann25-55/+94
This pull request contains Broadcom ARM-based SoCs Device Tree changes for 5.13, please pull the following: - Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN routers. He also fixes up the partitions for the Linksys EA9400 to use the newly introduced parser compatible and sets the power LED to its default state. * tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Set Linksys EA9500 power LED ARM: dts: BCM5301X: Fix Linksys EA9500 partitions ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers ARM: dts: BCM5301X: fix "reg" formatting in /memory node Link: https://lore.kernel.org/r/20210330184006.1451315-1-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.