aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-11-17ARM: dts: stm32: Add KS8851 on FMC2 to STM32MP1 DHCOMMarek Vasut1-0/+35
Add bindings for the KS8851 ethernet present on the STM32MP1 DHCOM SoM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: Add alternate pinmux for FMC EBI busMarek Vasut1-0/+55
Add another mux option for FMC EBI bus, this is used on DHCOM SoM for the second ethernet and on the PDK2 devkit for SRAM. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoMMarek Vasut1-0/+2
On the production DHCOM STM32MP15xx SoM, the PHY IRQ line is connected to the PI11 pin. Describe it in the DT as well, so the PHY IRQ can be used e.g. to detect cable insertion and removal. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: stm32: fix DCMI DMA features on stm32mp15 familyHugues Fruchet1-1/+1
Enable FIFO mode with half-full threshold. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-11-17ARM: dts: nuvoton: Add new device nodes to NPCM750 EVBTomer Maimon2-1/+523
Add the following new device nodes to NPCM750 evolution board device tree: - NPCM7xx Pin controller and GPIO - NPCM7xx PWM and FAN - NPCM7xx EHCI USB - NPCM7xx KCS - NPCM Reset - NPCM Peripheral SPI - NPCM FIU SPI - NPCM HWRNG - NPCM I2C - STMicro STMMAC Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-6-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Add new device nodesTomer Maimon2-6/+394
Add the following new device nodes to NPCM7XX: - NPCM7xx PWM and FAN. - NPCM7xx EHCI USB. - NPCM7xx KCS. - NPCM Reset. - NPCM Peripheral SPI. - NPCM FIU SPI. - NPCM HWRNG. - NPCM I2C. - STMicro STMMAC. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-5-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Add pinctrl and GPIO nodeTomer Maimon1-0/+564
Add pin controller and GPIO node to NPCM7XX device tree. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-4-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Modify timer register sizeTomer Maimon1-1/+1
Modify NPCM7xx device tree timer register size from 0x50 to 0x1C to control only the timer registers and not other hw modules. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-3-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-17ARM: dts: nuvoton: Modify clock parametersTomer Maimon2-12/+13
Modify NPCM7xx device tree clock parameter to clock constants that define at include/dt-bindings/clock/nuvoton,npcm7xx-clock.h file. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200929131807.15378-2-tmaimon77@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-11-16Merge tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds19-28/+34
Pull ARM SoC fixes from Arnd Bergmann: "Around one third of the fixes this time are for dts files that list their ethernet controller as using 'phy-mode="rgmii"' but are changed to 'phy-mode="rgmii-id"' now, because the PHY drivers (realtek, ksz9031, dp83867, ...) now configure the internal delay based on that when they used to stay on the hardware default. The long story is archived at https://lore.kernel.org/netdev/CAMj1kXEEF_Un-4NTaD5iUN0NoZYaJQn-rPediX0S6oRiuVuW-A@mail.gmail.com/ I was trying to hold off on the bugfixes until there was a solution that would avoid breaking all boards, but that does not seem to be happening any time soon, so I am now sending the correct version of the dts files to ensure that at least these machines can use their network devices again. The other changes this time are: - Updating the MAINTAINER lists for Allwinner and Samsung SoCs - Multiple i.MX8MN machines get updates for their CPU operating points to match the data sheet - A revert for a dts patch that caused a regression in USB support on Odroid U3 - Two fixes for the AMD Tee driver, addressing a memory leak and missing locking - Mark the network subsystem on qoriq-fman3 as cache coherent for correctness as better performance. - Minor dts fixes elsewhere, addressing dtc warnings and similar problems" * tag 'arm-soc-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid" ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 arm64: dts: renesas: r8a774e1: Add missing audio_clk_b tee: amdtee: synchronize access to shm list tee: amdtee: fix memory leak due to reset of global shm list arm64: dts: agilex/stratix10: Fix qspi node compatible ARM: dts: imx6q-prti6q: fix PHY address ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up ...
2020-11-16ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boardsMartin Jücker3-0/+1150
The P4 Note family contains a couple of variants of the Galaxy Note 10.1 tablet with mainly different modems. The GT-N8010/GT-N8013 is the WiFi only version. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-3-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-16ARM: exynos_defconfig: compile Atmel MXT touchscreeen as moduleMartin Jücker1-1/+1
The Atmel MXT touchscreen can load firmware and settings from the /lib/firmware directory, it makes sense to have it as a module to have more control over the loading process. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-5-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-16ARM: defconfig: add STMPE ADC driver for P4 NoteMartin Jücker2-0/+5
Enable the STMPE ADC driver for the P4 Note device family in exynos and multi_v7 defconfigs. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-4-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-16ARM: exynos: extend cpuidle support to P4 Note boardsMartin Jücker1-1/+2
The P4 Note family supports cpuidle, so allow it to make use of this feature. Signed-off-by: Martin Jücker <martin.juecker@gmail.com> Link: https://lore.kernel.org/r/20201113212525.13455-6-martin.juecker@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-11-16Merge tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann3-2/+5
i.MX fixes for 5.10, round 4: - Fix MDIO over clocking on vf610-zii-dev-rev-b board to get switch device work reliably. - Fix imx50-evk IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. - Fix voltage for 1.6GHz CPU operating point on i.MX8MM to match hardware datasheet. - Fix phy-mode for KSZ9031 PHY on imx6qdl-udoo board. * tag 'imx-fixes-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx50-evk: Fix the chip select 1 IOMUX arm64: dts: imx8mm: fix voltage for 1.6GHz CPU operating point ARM: dts: vf610-zii-dev-rev-b: Fix MDIO over clocking arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy Link: https://lore.kernel.org/r/20201116090702.GM5849@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where neededArnd Bergmann2-0/+4
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000) As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture. The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h. After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged. I looked up the possible number of bits in source code and datasheets, here is what I found: - on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages. Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Stefan Agner <stefan@agner.ch> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-16ARM: configs: sunxi: enable Realtek PHYCorentin Labbe1-0/+1
Lot of sunxi boards has a Realtek PHY, so let's enable it. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201112202652.27676-1-clabbe@baylibre.com
2020-11-16ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO modeAlexander Shiyan4-4/+4
According to AM335x datasheet pin AM335X_PIN_GPMC_WPN in MODE7 works as GPIO0[31]. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am335x-boneblue: Enable eQEPDavid Lechner1-0/+54
This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for connectors E1, E2 and E3 on BeagleBone Blue. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am33xx: Add nodes for eQEPDavid Lechner1-0/+27
This adds new nodes for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: dra7: add second SHA instanceTero Kristo1-2/+32
DRA7 SoC has two SHA instances, add the missing second one under the main dts file. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy remaining legacy platform data for am4Tony Lindgren7-382/+1
We can now drop the remaining legacy platform data as we are probing devices with device tree data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l3Tony Lindgren1-2/+4
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Move am4 l3 noc to a separate nodeTony Lindgren1-4/+8
In preparation for probing l3 with simple-pm-bus and genpd, we must move l3 noc to a separate node to prevent omap_l3_noc.c driver from claiming the whole l3 instance before simple-pm-bus has a chance to probe. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_perTony Lindgren1-5/+8
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_fastTony Lindgren1-2/+5
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am4 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 mpussTony Lindgren6-48/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 ocmcramTony Lindgren4-40/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 emifTony Lindgren3-43/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 wkup_m3Tony Lindgren3-48/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am4 wkup_m3Tony Lindgren2-18/+17
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure RTC powerdomain for am4Tony Lindgren1-0/+1
For genpd we need the RTC powerdomain configured. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am4 control moduleTony Lindgren3-29/+3
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. To drop the legacy platform data for am3 control module, we need to configure the missing functional clock and tag the module to not idle as platform data also had it configured with HWMOD_INIT_NO_IDLE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure also interconnect clocks for am4 system timerTony Lindgren1-0/+6
We now manage clocksource and clockevent clocks directly with timer-ti-dm-systimer. In order to use genpd with prm_omap, GENPD_FLAG_PM_CLK and simple-pm-bus, we need to keep the system timer related interconnect clocks enabled until clocksource suspend is done. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am43xx: add remaining PRM instancesTero Kristo1-0/+26
Add remaining PRM instances for the am43xx SoC. Additionally enable the genpd support for them. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Build hwmod related code as neededTony Lindgren3-12/+22
If we have only am3 selected, there's no need to build the hwmod related code as we are probing devices with device tree data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy remaining legacy platform data for am3Tony Lindgren3-164/+0
We can now drop the remaining legacy platform data as we are probing devices with device tree data. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l3Tony Lindgren1-2/+4
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_perTony Lindgren1-5/+8
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_fastTony Lindgren1-2/+5
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Use simple-pm-bus for genpd for am3 l4_wkupTony Lindgren1-4/+7
We can now enable simple-pm-bus to use genpd. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 mpussTony Lindgren4-9/+18
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 instrTony Lindgren3-8/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 ocmcramTony Lindgren3-15/+23
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Note that we need to use "ti,no-idle" here. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 emifTony Lindgren2-31/+17
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 debugssTony Lindgren2-42/+14
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 and am4 gpmcTony Lindgren8-78/+65
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: OMAP2+: Drop legacy platform data for am3 wkup_m3Tony Lindgren2-44/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: Configure interconnect target module for am3 wkup_m3Tony Lindgren2-17/+14
We can now probe devices with device tree only configuration using ti-sysc interconnect target module driver. Note that we no longer need ti,no-reset-on-init as the rstctrl resets are properly handled by the reset driver and claimed by the RTC driver. And we need to squash together the module ranges for driver compability. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Suman Anna <s-anna@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.