aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2020-07-20ARM: dts: aspeed: ast2500: Update XDMA engine nodeEddie James1-2/+3
Correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-20ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detectMichael Trimarchi1-1/+2
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID because of which when card is inserted, usb otg is enumerated and the card is never detected. [ 64.492645] cfg80211: failed to load regulatory.db [ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware [ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2 [ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 76.412763] usb usb2: Product: EHCI Host Controller [ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd [ 76.424623] usb usb2: SerialNumber: ci_hdrc.0 [ 76.431755] hub 2-0:1.0: USB hub found [ 76.435862] hub 2-0:1.0: 1 port detected The TRM mentions GPIO_1 pad should be muxed/assigned for card detect and ENET_RX_ER pad for USB_OTG_ID for proper operation. This patch fixes pin muxing as per TRM and is tested on a i.Core 1.5 MX6 DL SOM. [ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable [ 22.459992] mmc0: new high speed SDHC card at address 0001 [ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB [ 22.478856] mmcblk0: p1 p2 Fixes: 6df11287f7c9 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support") Cc: stable@vger.kernel.org Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdogChris Healy1-0/+12
Add I2C child node for switch watchdog present on SPU3 Signed-off-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd propertiesChris Healy1-0/+3
esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd" properties. esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property. Signed-off-by: Chris Healy <cphealy@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2Fabio Estevam1-1/+1
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2Fabio Estevam1-1/+1
Commit 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the phy-mode for fec1, but missed to fix it for the fec2 node. Fix fec2 to also use "rgmii-id" as the phy-mode. Cc: <stable@vger.kernel.org> Fixes: 0672d22a1924 ("ARM: dts: imx: Fix the AR803X phy-mode") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6q-tbs2910: Pass reset-assert-usFabio Estevam1-1/+2
According to the AR8035 datasheet: "When using crystal, the clock is generated internally after power is stable. For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6q-tbs2910: Add an mdio nodeFabio Estevam1-0/+11
imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4. The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now expects the 'qca,clk-out-frequency' property to be passed via device tree. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Soeren Moch <smoch@web.de> Tested-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6qdl-sabresd: Pass reset-assert-usFabio Estevam1-1/+2
According to the AR8031 datasheet: "When using crystal, clock is generated internally after the power is stable. In order to get reliable power-on-reset, it is recommended to keep asserting the reset low signal long enough (10 ms) to ensure the clock is stable and clock-to-reset (1 ms) requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6qdl-sabresd: Add an mdio nodeFabio Estevam1-0/+11
imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1. The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. An advantage of adding the mdio node is that the AR8031 initialization code in the mx6sabresd board file in U-Boot can totally be removed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Soeren Moch <smoch@web.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-20ARM: dts: imx6qdl-gw: add Gateworks System Controller supportTim Harvey14-57/+2076
Add Gateworks System Controller support to Gateworks Ventana boards: - add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers. - add dt bindings for gpio-keys driver for push-button and interrupt events Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-19dma-mapping: make support for dma ops optionalChristoph Hellwig1-0/+1
Avoid the overhead of the dma ops support for tiny builds that only use the direct mapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2020-07-18ARM: dts: socfpga: add the temperature sensor to the Arria10 devkitDinh Nguyen1-0/+5
Add the Maxim max1619 temp sensor that is on the Arria10 devkit. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-18arm: dts: socfpga: add reset-names to spi nodeDinh Nguyen2-0/+4
Add reset-names = "spi" to spi dts nodes. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2020-07-18ARM: dts: dlink-dns327l: fix reg-init PHYDaniel González Cabanelas1-3/+2
The marvell PHY reg-init registers for the D-Link DNS-327L are wrong. Currently the first field is used to set the page 2, but this is pointless. The usage is not correct, and we are setting the wrong registers. Fix it. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-07-18ARM: orion/gpio: Make use of for_each_requested_gpio()Andy Shevchenko1-6/+2
Make use of for_each_requested_gpio() instead of home grown analogue. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Gregory Clement <gregory.clement@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-07-18ARM: dts: kirkwood: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-07-18ARM: dts: rockchip: Fix VBUS on rk3288-vyasaMichael Trimarchi1-2/+1
Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral". Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Link: https://lore.kernel.org/r/20200707101214.2301768-1-michael@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki2-0/+18
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add VMARC RK3288 SOM initial supportJagan Teki1-0/+270
VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - eMMC: 16GB/32GB/64GB - SD slot - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-7-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move common properties into CarrierJagan Teki1-4/+14
Some of gmac, sdmmc node properties are common across rk3288 and rk3399pro SOM's so move them into Carrier dtsi. Chosen node is specific to rk3399pro configure SBC, so move it into RockPI N10 dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move supply regulators into CarrierJagan Teki1-0/+19
Supply regulators are common across different variants of vmarc SOM's since the Type C power controller IC is part of the carrier board. So, move the supply regulators into carrier board dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOMJagan Teki1-32/+0
I2C nodes and associated slave devices defined in Carrier board are specific to rk3399pro vmrac SOM. So, move them into SOM dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang5-0/+9
This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Link: https://lore.kernel.org/r/1593439866-68459-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: at91: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200713065859.31770-1-grandmaster@al2klimov.de
2020-07-18ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()yu kuai1-3/+8
if of_find_device_by_node() succeed, at91_pm_sram_init() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: d2e467905596 ("ARM: at91: pm: use the mmio-sram pool to access SRAM") Signed-off-by: yu kuai <yukuai3@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200604123301.3905837-1-yukuai3@huawei.com
2020-07-17Merge tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into masterLinus Torvalds11-23/+32
Pull ARM SoC fixes from Arnd Bergmann: "This time there are a number of actual code fixes, plus a small set of device tree issues getting addressed: Renesas: - one defconfig cleanup to allow a later Kconfig change Intel socfpga: - enable QSPI devices on some machines - fix DTC validation warnings TI OMAP: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x NXP i.MX: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. Amlogic Meson: - misc DT fixes - SoC ID fixes to detect all chips correctly" * tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
2020-07-17Merge tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann53-2195/+7251
ARM: tegra: Device tree changes for v5.9-rc1 This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab A500. In addition there are a slew of fixes to existing device trees in preparation for validating the DTBs against json-schema. * tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits) ARM: tegra: Add device-tree for ASUS Google Nexus 7 ARM: tegra: Add device-tree for Acer Iconia Tab A500 ARM: tegra: Add HDMI supplies on Nyan boards ARM: tegra: Add missing DSI controller on Tegra30 ARM: tegra: Add i2c-bus subnode for DPAUX controllers ARM: tegra: The Tegra30 SDHCI is not backwards-compatible ARM: tegra: The Tegra30 DC is not backwards-compatible ARM: tegra: Remove spurious comma from node name ARM: tegra: Add parent clock to DSI output ARM: tegra: Use standard names for SRAM nodes ARM: tegra: seaboard: Use standard battery bindings ARM: tegra: Use standard names for LED nodes ARM: tegra: Use numeric unit-addresses ARM: tegra: medcom-wide: Remove extra panel power supply ARM: tegra: Use proper unit-addresses for OPPs ARM: tegra: Add missing clock-names for SDHCI controllers ARM: tegra: Fix order of XUSB controller clocks ARM: tegra: Add #reset-cells to Tegra124 memory controller ARM: tegra: Add missing panel power supplies ARM: tegra: Add micro-USB A/B port on Jetson TK1 ... Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dtArnd Bergmann6-0/+160
ARM: dts: amlogic updates for v5.9 - power-domain and MMC updates * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: enable the SDHC controller ARM: dts: meson8b: ec100: enable the SDHC controller ARM: dts: meson: add the SDHC MMC controller ARM: dts: meson8b: add power domain controller ARM: dts: meson8m2: add resets for the power domain controller ARM: dts: meson8: add power domain controller Link: https://lore.kernel.org/r/7hd04uf2o8.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixesArnd Bergmann2-2/+2
arm/arm64: dts: socfpga: fixes for v5.8 - Add status = "okay" in QSPI - Increase QSPI size in reg property - Fix dtschema for SoCFPGA platforms * tag 'socfpga_fixes_for_v5.8_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema arm64: dts: stratix10: increase QSPI reg address in nand dts file arm64: dts: stratix10: add status to qspi dts node arm64: dts: agilex: add status to qspi dts node Link: https://lore.kernel.org/r/20200717155758.18233-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17ARM: rpc: Change blacklist to quirklist in ecode.c filePaul Schulz1-9/+9
This is a functionally trivial patch which removes the word 'blacklist' (and variations) from this code and replaces it with 'quirklist' It has no other effect. Link: https://lore.kernel.org/r/20200715024755.967904-1-paul@mawsonlakes.org Signed-off-by: Paul Schulz <paul@mawsonlakes.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17Merge tag 'renesas-arm-dt-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann23-58/+53
Renesas ARM DT updates for v5.9 (take two) - SPI Multi I/O Bus Controller (RPC-IF) support for R-Car V3H and V3M, including QSPI support for the Condor, Eagle, V3HSK, and V3MSK boards, - Initial support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, - Initial support for the Beacon EmbeddedWorks RZ/G2M board, - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) ARM: dts: sh73a0: Add missing clocks to sound node arm64: dts: renesas: r8a774e1: Add CAN[FD] support arm64: dts: renesas: r8a774e1: Add RWDT node arm64: dts: renesas: r8a774e1: Add MSIOF nodes arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774e1: Add SDHI nodes arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add TMU device nodes arm64: dts: renesas: r8a774e1: Add CMT device nodes arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support arm64: dts: renesas: r8a774e1: Add operating points arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit arm64: dts: renesas: r8a774e1: Add Ethernet AVB node arm64: dts: renesas: r8a774e1: Add GPIO device nodes arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes arm64: dts: renesas: r8a774e1: Add IPMMU device nodes ARM: dts: gose: Fix ports node name for adv7612 ARM: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: add full-pwr-cycle-in-suspend into eMMC nodes ... Link: https://lore.kernel.org/r/20200717112427.26032-2-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17ARM: dts: sh73a0: Add missing clocks to sound nodeGeert Uytterhoeven1-0/+1
The device node for the FIFO-buffered Serial Interface sound node lacks the "clocks" property, as the DTS file didn't describe any clocks yet at its introduction. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200519075525.24742-1-geert+renesas@glider.be
2020-07-17ARM: dts: gose: Fix ports node name for adv7612Niklas Söderlund1-1/+1
When adding the adv7612 device node the ports node was misspelled as port, fix this. Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17ARM: dts: renesas: Fix SD Card/eMMC interface device node namesYoshihiro Shimoda17-50/+50
Fix the device node names as "mmc@". Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree") Fixes: a49f76cddaee ("ARM: dts: r7s9210: Add SDHI support") Fixes: 43304a5f5106 ("ARM: shmobile: r8a73a4: tidyup DT node naming") Fixes: 7d907894bfe3 ("ARM: shmobile: r8a7740: tidyup DT node naming") Fixes: 3ab2ea5fd1ce ("ARM: dts: r8a7742: Add SDHI nodes") Fixes: 63ce8a617b51 ("ARM: dts: r8a7743: Add SDHI controllers") Fixes: b591e323b271 ("ARM: dts: r8a7744: Add SDHI nodes") Fixes: d83010f87ab3 ("ARM: dts: r8a7744: Initial SoC device tree") Fixes: 7079131ef9b9 ("ARM: dts: r8a7745: Add SDHI controllers") Fixes: 0485da788028 ("ARM: dts: r8a77470: Add SDHI1 support") Fixes: 15aa5a95e820 ("ARM: dts: r8a77470: Add SDHI0 support") Fixes: f068cc816015 ("ARM: dts: r8a77470: Add SDHI2 support") Fixes: 14e1d9147d96 ("ARM: shmobile: r8a7778: tidyup DT node naming") Fixes: 2624705ceb7b ("ARM: shmobile: r8a7779: tidyup DT node naming") Fixes: b718aa448378 ("ARM: shmobile: r8a7790: tidyup DT node naming") Fixes: b7ed8a0dd4f1 ("ARM: shmobile: Add SDHI devices to r8a7791 DTSI") Fixes: ce01b14ecf19 ("ARM: dts: r8a7792: add SDHI support") Fixes: fc9ee228f500 ("ARM: dts: r8a7793: Add SDHI controllers") Fixes: b8e8ea127d00 ("ARM: shmobile: r8a7794: add SDHI DT support") Fixes: 33f6be3bf6b7 ("ARM: shmobile: sh73a0: tidyup DT node naming") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594382936-14114-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-17arm/arm64: defconfig: Update configs to use the new CROS_EC optionsEnric Balletbo i Serra4-4/+11
We refactored the CrOS EC drivers moving part of the code from the MFD subsystem to the platform chrome subsystem. During this change we needed to rename some config options, so, update the defconfigs accordingly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-17ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2020-07-16Merge tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtArnd Bergmann113-162/+423
More dts changes for omaps for v5.9 A series of changes to configure IPU and DSP remoteproc for omap4 & 5. And a change to configure the default mux for am335x-pocketbeagle, and a change to use https for external links. * tag 'omap-for-v5.9/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP ARM: dts: omap5-uevm: Add system timers to DSP and IPU ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP ARM: dts: omap5: Add aliases for rproc nodes ARM: dts: omap5: Add DSP and IPU nodes ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP ARM: dts: omap4: Add aliases for rproc nodes ARM: dts: omap4: Add IPU DT node ARM: dts: omap4: Update the DSP node ARM: dts: omap5: Add timer_sys_ck clocks for timers ARM: dts: omap4: Add timer_sys_ck clocks for timers ARM: dts: am335x-pocketbeagle: set default mux for gpio pins Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dtArnd Bergmann14-684/+105
Drop more legacy platform data for omaps for v5.9 A series of changes to drop remaining USB platform data for omap4/5, and am4, and dra7. And a patch to drop AES platform data for omap3. * tag 'omap-for-v5.9/ti-sysc-drop-pdata-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Drop legacy platform data for omap5 usb host ARM: OMAP2+: Drop legacy platform data for omap4 usb ARM: OMAP2+: Drop legacy platform data for dra7 dwc3 ARM: OMAP2+: Drop legacy platform data for omap5 dwc3 ARM: OMAP2+: Drop legacy platform data for am4 dwc3 bus: ti-sysc: Add missing quirk flags for usb_host_hs ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2 Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com-2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/socArnd Bergmann7-7/+7
SoC changes for omaps for v5.9 merge window Just one commit to use https for the external links. * tag 'omap-for-v5.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP: Replace HTTP links with HTTPS ones Link: https://lore.kernel.org/r/pull-1594838111-649880@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixesArnd Bergmann2-7/+21
Fixes for omaps for v5.8-rc cycle Few fixes for issues noticed during testing: - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module driver - A regression fix for ti-sysc no-idle handling that caused issues compared to earlier platform data based booting - A fix for memory leak for omap_hwmod_allocate_module - Fix d_can driver probe for am437x * tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan driver probe failed on am437x platform ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module bus: ti-sysc: Do not disable on suspend for no-idle bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk bus: ti-sysc: Fix wakeirq sleeping function called from invalid context Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesArnd Bergmann6-13/+8
i.MX fixes for 5.8, round 2: - A couple of fixes on i.MX platform device registration code to stop the use of invalid IRQ 0. - Fix a regression seen on ls1021a platform, caused by commit 52102a3ba6a61 ("soc: imx: move cpu code to drivers/soc/imx"). - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board. * tag 'imx-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: check ls1021a ARM: imx: Remove imx_add_imx_dma() unused irq_err argument ARM: imx: Provide correct number of resources when registering gpio devices ARM: dts: imx6qdl-gw551x: fix audio SSI Link: https://lore.kernel.org/r/20200714145649.GP15718@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixesArnd Bergmann1-1/+1
Amlogic fixes for v5.8-rc - misc DT fixes, and SoC ID fixes * tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: Align L2 cache-controller nodename with dtschema arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency arm64: dts: meson: add missing gxl rng clock soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's Link: https://lore.kernel.org/r/7hk0zc1ujc.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook2-2/+2
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-16ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500Dmitry Osipenko1-0/+42
Enable several very useful options and drivers for hardware that is found on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may require firmware files extracted from original Android image. Link: https://github.com/grate-driver/linux-firmware Link: https://github.com/grate-driver/alsa-ucm-conf Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: tegra: Add device-tree for ASUS Google Nexus 7Dmitry Osipenko11-0/+3870
There are few hardware variants of NVIDIA Tegra30-based Nexus 7 device: 1. WiFi-only (named Grouper) 2. GSM (named Tilapia) 3. Using Maxim PMIC (E1565 board ID) 4. Using Ti PMIC (PM269 board ID) This patch adds device-trees for known and tested variants. Link: https://wiki.postmarketos.org/wiki/Google_Nexus_7_2012_(asus-grouper) Tested-by: Pedro Ângelo <pangelo@void.io> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Zack Pearsall <zpearsall@yahoo.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: tegra: Add device-tree for Acer Iconia Tab A500Dmitry Osipenko2-0/+1439
Add device-tree for Acer Iconia Tab A500, which is NVIDIA Tegra20-based tablet device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: dts: renesas: Remove unused remote property from adv7180 nodesNiklas Söderlund6-6/+0
The remote property is never read by the driver, remove it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200704155856.3037010-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-16ARM: dts: gose: Fix ports node name for adv7180Niklas Söderlund1-1/+1
When adding the adv7180 device node the ports node was misspelled as port, fix this. Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200704155856.3037010-2-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-15ARM: dts: socfpga: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski2-2/+2
Fix dtschema validator warnings like: l2-cache@fffff000: $nodename:0: 'l2-cache@fffff000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Fixes: 475dc86d08de ("arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.