aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2019-06-26ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICSAnson Huang1-0/+1
Enable CONFIG_THERMAL_STATISTICS to extend the sysfs interface for thermal cooling devices and expose some useful statistics. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-25ARM: exynos: Cleanup cppcheck shifting warningPhong Tran1-1/+1
Fix warning from cppcheck tool: "Shifting signed 32-bit value by 31 bits is undefined behaviour errors" Signed-off-by: Phong Tran <tranmanphong@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-25ARM: dts: msm8974-FP2: Add vibration motorLuca Weiss1-0/+6
Add a node describing the vibration motor on the Fairphone 2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Andy Gross <agross@kernel.org>
2019-06-25clocksource/drivers/arm_arch_timer: Extract elf_hwcap use to arch-helperAndrew Murray1-0/+10
Different mechanisms are used to test and set elf_hwcaps between ARM and ARM64, this results in the use of ifdeferry in this file when setting/testing for the EVTSTRM hwcap. Let's improve readability by extracting this to an arch helper. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-06-26ARM: dts: uniphier: update to new Denali NAND bindingMasahiro Yamada9-4/+30
With commit d8e8fd0ebf8b ("mtd: rawnand: denali: decouple controller and NAND chips"), the Denali NAND controller driver migrated to the new controller/chip representation. Update DT for it. In the new binding, the number of connected chips are described in DT instead of run-time probed. I added just one chip to the reference boards, where we do not know if the on-board NAND device is a single chip or multiple chips. If we added too many chips into DT, it would end up with the timeout error in nand_scan_ident(). I changed all the pinctrl properties to use the single CS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-25Merge tag 'imx-soc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/socOlof Johansson2-5/+12
i.MX SoC changes for 5.3: - Switch imx7d to imx-cpufreq-dt for speed-grading, as imx-cpufreq-dt driver can handle speed grading bits on imx7d just like on imx8mq. - Improve imx6 cpuidle driver to use raw_spinlock_t. The change makes no difference for !RT build, but is required by RT kernel. * tag 'imx-soc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: imx6: cpuidle: Use raw_spinlock_t Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'pxa-for-5.3-2' of https://github.com/rjarzmik/linux into arm/socOlof Johansson2-6/+1
This is the pxa changes for 5.3 cycle : - a simple cleanup for lubbock * tag 'pxa-for-5.3-2' of https://github.com/rjarzmik/linux: ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'at91-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/socOlof Johansson1-0/+1
AT91 SoC for 5.3 - fix a pm.c warning with W=1 * tag 'at91-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm: add missing include platform-data/atmel.h Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'renesas-arm-soc-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/socOlof Johansson1-0/+17
Renesas ARM Based SoC Updates for v5.3 * Auto-enable RZ/A1 IRQC on RZ/A1H and RZ/A2M * Don't init CNTVOFF/counter if PSCI is available * tag 'renesas-arm-soc-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Enable RZ/A1 IRQC on RZ/A1H and RZ/A2M ARM: mach-shmobile: Don't init CNTVOFF/counter if PSCI is available Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'davinci-for-v5.3/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/socOlof Johansson1-21/+22
This pull request has a patch to switch DA850 EVM GPIO LED support to use GPIO lookup table * tag 'davinci-for-v5.3/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: Use GPIO lookup table for DA850 LEDs Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfigOlof Johansson3-4/+28
ASPEED device tree updates for 5.3 Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5 multi defconfig. * tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: configs: multi_v5: Add more ASPEED devices ARM: configs: aspeed: Add new drivers Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25ARM: multi_v7_defconfig: enable STMFX pinctrl supportAmelie Delaunay1-0/+1
This patch enables support for STMFX pinctrl. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfigOlof Johansson1-1/+0
Renesas ARM Based SoC Defconfig Updates for v5.3 * Remove GENERIC_PHY from shmobile_defconfig as it is now selected * tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Remove GENERIC_PHY from shmobile_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfigOlof Johansson1-0/+6
Qualcomm ARM Based defconfig Updates for v5.3 * Add support for USB networking * Add support for display related options * tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: qcom_defconfig: add support for USB networking ARM: qcom_defconfig: add display-related options Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtOlof Johansson36-258/+2198
i.MX arm32 DT changes for 5.3: - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based Meerkat96 board, and NXP LS1021A-TSN board. - A series from Andrey Smirnov to update vf610-zii-dev and imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path, adding QSPI device, and dropping unused pinmux. - Update imx6sl and imx6qdl device tree to assign corresponding clocks instead of dummy clock. - Update i.MX6/7 boards from NXP to assign corresponding power supply for LDOs. - Update i.MX6/7 device trees to enable SNVS poweroff key support according to board design. - Update coresight DT binding for i.MX7 according to consolidations for CoreSight replicator and funnel. - A series from Marek Vasut to update M53Menlo board on various devices like UART, USB, ethernet PHY, GPIOs etc. - Enable USBOTG support for imx7ulp and evk board. - A series from Peter Robinson to update imx6sx-udoo board, switching to SPDX License Identifier, enabling I2C devices and bluetooth support. - Add video capture support for i.MX53 and imx53-smd board. - Add PXP device for i.MX6UL. - Other random small updates on various boards. * tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits) ARM: dts: imx7ulp-evk: enable USBOTG1 support ARM: dts: imx7ulp: add imx7ulp USBOTG1 support ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path' ARM: dts: Add support for 96Boards Meerkat96 board ARM: dts: imx6ul: Add PXP node ARM: dts: imx6sll: Enable SNVS poweroff according to board design ARM: dts: imx7s: Enable SNVS power key according to board design ARM: dts: imx6sll: Enable SNVS power key according to board design ARM: dts: imx6ul: Enable SNVS power key according to board design ARM: dts: imx6sx: Enable SNVS power key according to board design ARM: dts: imx6qdl: Enable SNVS power key according to board design ARM: dts: imx53: Bind CPLD on M53Menlo ARM: dts: Introduce the NXP LS1021A-TSN board ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1 ARM: dts: imx7d: Update cpufreq OPP table ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3 ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux into arm/dtOlof Johansson4-4/+34
This is the pxa devicetree changes for 5.3 cycle : - devicetree pinmux support for bias on pxa3xx - devicetree pinmux bias usage for raumfeld * tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux: ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320 ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node ARM: pxa: raumfeld-controller: add pinctrl for charger pins ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down} Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtOlof Johansson6-96/+14
AT91 DT for 5.3 - switch to new sckc bindings - convert soc bindings to json-schema * tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: arm: Convert Atmel board/soc bindings to json-schema ARM: dts: at91: sama5d3: switch to new sckc bindings ARM: dts: at91: at91sam9rl: switch to new sckc bindings ARM: dts: at91: at91sam9g45: switch to new sckc bindings ARM: dts: at91: at91sam9x5: switch to new sckc bindings ARM: dts: at91sam9261ek: remove unused chosen nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dtOlof Johansson12-5/+1314
STM32 DT updates for v5.3, round 1 Highlights: ---------- MPU part: -Add stm32mp157a-avenger board support: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet 10/100/1000, WiFi 5 GHz & 2.4GHz, ... -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on it. -Add I2S and SAI support on stm32mp157c. -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards (EV1 and DK2 inherit of it). -Add camera support: -Add DCMI support on stm32mp157c SOC -Enabled OV5640 camera support on stm32mp157c-ev1 board -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1 board. MCU part: -Add STMFX support en stm32746g-eval and enable connections on it: leds and joystick * tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits) ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A dt-bindings: arm: stm32: Document Avenger96 devicetree binding dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157 ARM: dts: stm32: add sai id registers to stm32mp157c ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1 ARM: dts: stm32: enable display on stm32mp157c-dk1 board ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1 ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board ARM: dts: stm32: add DCMI pins to stm32mp157c ARM: dts: stm32: add DCMI camera interface support on stm32mp157c ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board ARM: dts: stm32: Add Vivante GPU support on STM32MP157c ARM: dts: stm32: add i2s pins muxing on stm32mp157 ARM: dts: stm32: add i2s support on stm32mp157c ARM: dts: stm32: add sai pins muxing on stm32mp157 ARM: dts: stm32: add sai support on stm32mp157c ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1 ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dtOlof Johansson1-0/+14
mvebu dt for 5.3 (part 1) Add LCD support on Netgear RN104 * tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts. Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dtOlof Johansson26-35/+589
Renesas ARM Based SoC DT Updates for v5.3 * Renesas SoC based boards - Use ip=on for bootargs * Renesas R-Car Gen 2 SOC based boards - Configure PMIC IRQ pinmux * R-Car V2H (r8a7792) SoC - Describe CMT devices in DT * RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and RZ/G1N (r8a7744) based boards: - Correct SDHI2 VccQ regulator to fix SDR50 mode * RZ/A2M (r7s9210) based rza2mevb EVB RZ/A1H (r7s72100) based rskrza1 board - Describe input switch in DT * RZ/A2M (r7s9210) based rza2mevb EVB - Sort nodes to ease future maintenance - Add USB host, Ethernet and SDHI support * RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs - Describe IRQC device in DT * tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792 ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor ARM: dts: rza2mevb: Add input switch ARM: dts: r7s9210: Add IRQC device node ARM: dts: rza2mevb: sort nodes of rza2mevb board ARM: dts: renesas: Use ip=on for bootargs ARM: dts: rza2mevb: Add USB Host support ARM: dts: r7s9210: Add USB Device support ARM: dts: r7s9210: Add USB Host support ARM: dts: rskrza1: Add input switches ARM: dts: r7s72100: Add IRQC device node ARM: dts: r8a779x: Configure PMIC IRQ pinmux ARM: dts: rza2mevb: Add 48MHz USB clock ARM: dts: r7s9210: Add USB clock ARM: dts: rza2mevb: add ethernet aliases ARM: dts: rza2mevb: Add SDHI support ARM: dts: rza2mevb: Add Ethernet support ARM: dts: r7s9210: Add SDHI support ARM: dts: r7s9210: Add RIIC support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtOlof Johansson4-8/+4
This time we only have a single patch for our command branch between arm and arm64, a fix for the array syntax raised by our DT schemas. * tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtOlof Johansson11-17/+204
Our usual bunch of patches: - Some work on the BPi M2-Berry to support various devices - Convert some bindings to a schema, and a lot of fixes reported by the schemas we introduced. - A few other fixes here and there * tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: pwm: Convert Allwinner PWM to a schema ARM: dts: sun8i: r40: Change the RTC compatible ARM: dts: sun8i: v3s: Add external crystals accuracy ARM: dts: sun8i: v3s: Fix the RTC node ARM: dts: sun6i: Add external crystals accuracy ARM: dts: sun6i: Fix RTC node ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) ARM: dts: gr8-evb: Fix RTC vendor ARM: dts: sun7i: icnova-swac: Fix the model vendor ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies ARM: dts: sun6i: Add default address and size cells for SPI ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT dt-bindings: bus: Convert Allwinner RSB to a schema ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ... Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dtOlof Johansson11-345/+223
ARM: dts: Amlogic updates for v5.3 - SPDX updates - switch to generic ethernet PHY reset bindings - add the canvas module - mxiii-plus board: add regulators * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson: switch to the generic Ethernet PHY reset bindings ARM: dts: meson8b: update with SPDX Licence identifier ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier ARM: dts: meson8b-mxq: update with SPDX Licence identifier ARM: dts: meson8: update with SPDX Licence identifier ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier ARM: dts: meson6: update with SPDX Licence identifier ARM: dts: meson6-atv1200: update with SPDX Licence identifier ARM: dts: meson: update with SPDX Licence identifier ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805 ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator ARM: dts: meson8b: add the canvas module ARM: dts: meson8m2: update the offset of the canvas module ARM: dts: meson8: add the canvas module Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dtOlof Johansson5-0/+130
This pull request adds CPUFreq support for DA850 boards in device-tree boot using the generic CPUFREQ_DT driver. * tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: Enable CPUFREQ_DT ARM: dts: da850-evm: enable cpufreq ARM: dts: da850-lcdk: enable cpufreq ARM: dts: da850-lego-ev3: enable cpufreq ARM: dts: da850: add cpu node and operating points to DT Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dtOlof Johansson17-13/+3417
ASPEED device tree updates for 5.3 We have various device tree updates from the OpenBMC project to enable bits and pieces in existing systems, notably updates to Google's Zaius. There are some AST2500 machines under development: * Lenovo Hr630 * IBM Swift * Facebook YAMP And some AST2400 machines that have been around but out of tree and have now joined the party: * YADRO VESNIN * Microsoft Olympus * tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Enable video engine on romulus and wtherspoon ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine ARM: dts: aspeed: Add YADRO VESNIN BMC ARM: dts: aspeed: Add Microsoft Olympus BMC ARM: dts: aspeed: Adding Lenovo Hr630 BMC ARM: dts: aspeed: Add Facebook YAMP BMC ARM: dts: aspeed: swift: Add pca9539 devices ARM: dts: aspeed: Add Swift BMC machine ARM: dts: aspeed: cmm: enable ehci host controllers ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots ARM: dts: aspeed: zaius: update 12V brick I2C address ARM: dts: aspeed: zaius: add Infineon and Intersil regulators ARM: dts: aspeed: quanta-q71: Enable p2a node ARM: dts: aspeed: Add aspeed-p2a-ctrl node ARM: dts: aspeed: Add Power9 and Power9 CFAM description ARM: dts: aspeed: Rename flash-controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtOlof Johansson3-5/+293
Qualcomm Device Tree Changes for v5.3 * Add display support to MSM8974 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead * Update coresight bindings for MSM8974 and APQ8064 * tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8974-hammerhead: add support for display ARM: dts: msm8974: add display support ARM: dts: qcom: msm8974-hammerhead: add support for backlight ARM: dts: qcom: msm8974-hammerhead: add touchscreen support ARM: dts: qcom-msm8974: Update coresight DT bindings ARM: dts: qcom-apq8064: Update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dtOlof Johansson1-9/+9
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3 - Updated CoreSight funnel and replicator using new bindings to fix warning for the hip04. * tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi: ARM: dts: hip04: Update coresight DT bindings Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixesOlof Johansson1-4/+4
i.MX fixes for 5.2, round 3: - A recent testing by Sébastien discovers that the PWM interrupts of i.MX6UL were wrongly coded in device tree. It's a fix for it. * tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6ul: fix PWM[1-4] interrupts Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixesOlof Johansson2-9/+7
ARM: dts: Amlogic fixes for v5.2-rc - fix GPU interrupts and operating voltage * tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: fix the operating voltage of the Mali GPU ARM: dts: meson8b: drop undocumented property from the Mali GPU node ARM: dts: meson8: fix GPU interrupts and drop an undocumented property Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dtOlof Johansson64-152/+104
This pull request contain Broadcom ARM-based SoCs Device Tree changes for 5.3 please pull the following: - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI controller - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files and provides a fix for devices failing to boot after the removal of skelton.dtsi (that commit has been submitted as a separate fix) * tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux: ARM: dts: BCM5301X: Fix most DTC W=1 warnings ARM: dts: NSP: Fix the bulk of W=1 DTC warnings ARM: dts: BCM63xx: Fix DTC W=1 warnings ARM: dts: BCM53573: Fix DTC W=1 warnings ARM: dts: bcm-mobile: Fix most DTC W=1 warnings ARM: dts: Cygnus: Fix most DTC W=1 warnings ARM: dts: Fix BCM7445 DTC warnings ARM: bcm283x: Enable DMA support for SPI controller ARM: dts: bcm: Add missing device_type = "memory" property Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT supportChristoph Hellwig1-21/+3
The arm-nommu DMA code supports DMA_ATTR_NON_CONSISTENT allocations, but does not provide a cache_sync operation. This means any user of it will never be able to actually transfer cache ownership and thus cause coherency bugs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
2019-06-25ARM: dma-mapping: allow larger DMA mask than supportedChristoph Hellwig1-19/+1
Since the Linux 5.1 merge window we allow drivers to just set the largest DMA mask they support instead of falling back to smaller ones. But I forgot to remove a check that prohibits this behavior in the arm DMA code, as it is rather hidden. There is not reason for this check as the code will do the right thing for a "too large" DMA mask, so just remove it. Fixes: 9eb9e96e97b3 ("Documentation/DMA-API-HOWTO: update dma_mask sections") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4Krzysztof Kozlowski10-0/+114
Add nodes for GPU (Mali 400) to Exynos4210 and Exynos4412. Describe the GPU as much as possible however still few elements are missing: 1. Exynos4210 bus clock is not described in hardware manual therefore the IP gate clock was provided, 2. Exynos4412: Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused), 3. Regulator supplies on Trats board. Limited testing on Odroid U3 (Exynos4412). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250Krzysztof Kozlowski4-0/+48
Add nodes for GPU (Mali 400) to Exynos3250. This is still limited and not tested: 1. No dynamic voltage and frequency scaling, 2. Not sure what to do with CLK_G3D clock responsible for gating entire IP block (it is now being disabled as unused). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()Vincent Guittot1-1/+1
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is unused since commit: 765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'") Remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: linux@armlinux.org.uk Cc: quentin.perret@arm.com Cc: rafael@kernel.org Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24ARM: dts: exynos: Use proper regulator for eMMC memory on Arndale OctaKrzysztof Kozlowski1-1/+1
The eMMC memory is supplied by LDO18 (PVDD_EMMC_1V8) and buck10 (PVDD_EMMCF_2V8), not by LDO10. The LDO10 (PVDD_PRE_1V8) supplies instead VDDP_MMC pin of eMMC host interface and it is already marked as always on. This change only properly models the hardware and reflects in usage of regulators. There is no functional change because: 1. LDO18 cannot be turned off (e.g. by lack of consumers) because in off mode it is controlled by LDO18EN pin, which is pulled up by always-on regulator LDO2 (PVDD_APIO_1V8). 2. LDO10 is marked as always on so removing its consumer will not have effect. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 familyKrzysztof Kozlowski1-0/+96
Add the PMIC regulator suspend configuration to entire Odroid XU3/XU4/HC1 family of boards to reduce power usage during suspend. The configuration is based on vendor (Hardkernel) reference kernel with additional buck9 suspend configuration (for USB hub suspend and proper reset). Energy consumption measurements from Marek Szyprowski during suspend to RAM: - all at 5 V power supply, - before: next-20190620, - after: next-20190620 + this patch + suspend configuration for s2mps11 regulator driver, Board | before [mA] | after [mA] | Odroid HC1 | 120 | 7-10 | Odroid XU4, sdcard | 88 | 6-9 | Odroid XU4, eMMC | 100 | 6-9 | Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
2019-06-24ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa boardKrzysztof Kozlowski1-0/+80
Add the PMIC regulator suspend configuration to Arndale Octa board to reduce power usage during suspend and keep necessary regulators on. The configuration is based on vendor (Insignal) reference kernel and the board datasheet. Comparing to vendor kernel, additionally turn off in suspend all regulators controlled by external pin (LDO3, LDO7, LDO18 and buck10). This is purely for hardware description because board does not support Suspend to RAM and the S2MPS11 driver does not support "regulator-on-in-suspend" property. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 boardKrzysztof Kozlowski2-2/+6
The eMMC memory on Odroid XU3/XU4 boards is supplied by two regulators LDO18 and buck10 (and LDO13 for the host interface). However the Odroid HC1 board does not have eMMC connector so this regulator does not have to be always on. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-06-24ARM: dts: imx7ulp-evk: enable USBOTG1 supportPeter Chen1-0/+35
Enable USBOTG1 support for evk board, it is dual-role function port. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24ARM: dts: imx7ulp: add imx7ulp USBOTG1 supportPeter Chen1-0/+28
Add imx7ulp USBOTG1 support. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM SupportMichael Grzeschik3-0/+442
The patch adds the following interfaces according the SMARC Spec 1.1 [1] and provided schematics: - SMARC SPI0/1 Note: Since Kontron still uses silicon revisions below 1.3 they have add a spi-nor to implement Workaround #1 of erratum ERR006282. - SMARC SDIO - SMARC LCD - SMARC HDMI - SMARC Management pins Note: Kontron don't route all of these pins to the i.MX6, some are routed to the SoM CPLD. - SMARC GPIO - SMARC CSI Camera Note: As specified in [1] the data lanes are shared to cover the csi and the parallel case. The case depends on the baseboard so muxing the data lanes is not part of this patch. - SMARC I2S - SMARC Watchdog Note: The watchdog output pin is routed to the CPLD and the SMARC header. The CPLD performs a reset after a 30s timeout so we need to enable the watchdog per default. - SMARC module eeprom Due to the lack of hardware not all of these interfaces are tesetd. [1] https://sget.org/standards/smarc Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24ARM: dts: imx6ul: fix PWM[1-4] interruptsSébastien Szymanski1-4/+4
According to the i.MX6UL/L RM, table 3.1 "ARM Cortex A7 domain interrupt summary", the interrupts for the PWM[1-4] go from 83 to 86. Fixes: b9901fe84f02 ("ARM: dts: imx6ul: add pwm[1-4] nodes") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-06-24ARM: module: recognize unwind exit sectionsMatthias Schiffer1-0/+7
In addition to the prefix ".exit", ".ARM.extab.exit" and ".ARM.exidx.exit" must be recognized as exit sections as well. Otherwise, loading modules can fail without CONFIG_MODULE_UNLOAD depending on the memory layout, when relocations for the unwind sections refer to the .exit.text section: imx_sdma: section 16 reloc 0 sym '': relocation 42 out of range (0x7f015260 -> 0xc0f5a5e8) where 0x7F000000 is the module load area and 0xC0000000 is the vmalloc area. Relocation 42 refers to R_ARM_PREL31, which is limited to signed 31bit offsets. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-24ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global viewRussell King2-6/+1
There are now no users of lubbock_set_misc_wr() outside lubbock.c, so make this function static. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-24ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320Daniel Mack1-0/+3
These settings are needed to make the hardware operable. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-24ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl nodeDaniel Mack1-3/+3
Careless oversight. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-24ARM: pxa: raumfeld-controller: add pinctrl for charger pinsDaniel Mack1-0/+10
The PEN2 line needs to be pulled up for the charger to enter high-current mode. Do this with a static pull on the GPIO. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-24ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO keyDaniel Mack1-1/+10
The dock detection input key is active low. Also add a pinmux for it. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2019-06-24ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down}Daniel Mack1-0/+8
This allows users of the pinctrl driver to specify either pinctrl-single,bias-pullup = MPF_PULL_UP; or pinctrl-single,bias-pulldown = MPF_PULL_DOWN; To activate the pull bits in the MFP registers. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.