aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo8-2/+7
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds112-2273/+12548
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits) Blackfin: stop cleaning include/asm/asm-offsets.h Blackfin: scale calibration when cpu freq changes Blackfin: eat spurious space in asm/dpmc.h Blackfin: fix anomaly 283 handling with exact hardware error Blackfin: bf537-stamp: add example ADXL346 orientation resources Blackfin: bf537-stamp: add example AD2S1210 IIO resources Blackfin: don't support keypad wakeup from hibernate Blackfin: bf537-stamp: add example AD7416 IIO resources Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Blackfin: bf537-stamp: add example AD7414 temp sensor resources Blackfin: rename AD1836 to AD183X in board files Blackfin: bf537-stamp: add example AD2S120x resources Blackfin: add support for the on-chip MAC status interrupts Blackfin: asm/page.h: pull in asm-generic headers Blackfin: mark gpio lib functions static Blackfin: bf537-stamp: add example ADAU1361 resources Blackfin: GPIO: implement to_irq handler Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Blackfin: bf537-stamp: add example AD2S90 resources Blackfin: bf537-stamp: add example AD5398 power regulator resources ...
2010-03-12Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds1-2/+2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12dma-mapping: blackfin: remove the obsolete and unnecessary DMA API commentsFUJITA Tomonori1-36/+0
pci_dma_sync_single was obsoleted long ago. All the comments are generic, not architecture specific, simply describes some of the DMA-API (and the same comments are in other files). Documentation/DMA-API.txt have more detailed descriptions. This removes the above obsolete and unnecessary DMA API comments. Let's describe the DMA API in only Documentation/DMA-API.txt. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-09Blackfin: stop cleaning include/asm/asm-offsets.hMike Frysinger1-1/+0
The file is no longer generated, so we don't want to clean it. Reported-by: Vivi Li <vivi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: scale calibration when cpu freq changesGraf Yang1-1/+12
Need to make sure we update the loops_per_jiffy values when we start changing the core clock. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: eat spurious space in asm/dpmc.hMike Frysinger1-2/+2
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: fix anomaly 283 handling with exact hardware errorRobin Getz1-2/+2
The exact hardware error handling code was added before the workaround for anomaly 283 which caused the anomaly to be triggered in some cases (an infinite core stall). So re-order the code to avoid this. Reported-by: Andrew Rook <andrew.rook@speakerbus.co.uk> Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example ADXL346 orientation resourcesMichael Hennerich1-9/+14
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD2S1210 IIO resourcesGraf Yang1-0/+28
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: don't support keypad wakeup from hibernateMichael Hennerich1-5/+0
The on-chip keypad peripheral requires different registers to be setup depending on the standby type (standby vs hibernation). However, since the power management framework doesn't differentiate between these types, the driver doesn't know which registers to program and subsequently it avoids doing so. Always enabling the keyboard wakeup source causes misbehavior when the pins are not assigned to the keypad. If they happen to drive a certain level, they'll trigger a wake up event which is not wanted. So until the aforementioned issue can be sorted out, drop support for the wakeup source completely. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD7416 IIO resourcesSonic Zhang1-0/+13
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example ADP8860 backlight/led resourcesMichael Hennerich1-0/+48
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD7414 temp sensor resourcesSonic Zhang1-0/+17
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: rename AD1836 to AD183X in board filesBarry Song14-41/+42
The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD2S120x resourcesGraf Yang1-0/+22
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add support for the on-chip MAC status interruptsMichael Hennerich4-7/+166
This patch provides infrastructure for MAC Wake-On-Lan and PHYINT use in phylib. New Interrupts added: IRQ_MAC_PHYINT /* PHY_INT Interrupt */ IRQ_MAC_MMCINT /* MMC Counter Interrupt */ IRQ_MAC_RXFSINT /* RX Frame-Status Interrupt */ IRQ_MAC_TXFSINT /* TX Frame-Status Interrupt */ IRQ_MAC_WAKEDET /* Wake-Up Interrupt */ IRQ_MAC_RXDMAERR /* RX DMA Direction Error Interrupt */ IRQ_MAC_TXDMAERR /* TX DMA Direction Error Interrupt */ IRQ_MAC_STMDONE /* Station Mgt. Transfer Done Interrupt */ On BF537/6 the implementation is not straight forward since there are now two chained chained_handlers. A cleaner approach would have been to add latter IRQs to the demux of IRQ_GENERIC_ERROR. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: asm/page.h: pull in asm-generic headersMike Frysinger1-0/+3
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: mark gpio lib functions staticJoachim Eastwood1-7/+7
Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example ADAU1361 resourcesCliff Cai1-0/+5
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: GPIO: implement to_irq handlerJoachim Eastwood2-4/+19
This makes it possible to support IRQs coming from off-chip GPIO controllers. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resourcesSonic Zhang1-0/+99
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD2S90 resourcesGraf Yang1-0/+17
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD5398 power regulator resourcesSonic Zhang1-0/+74
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: remove trailing space in messagesFrans Pop2-6/+6
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example ADS7846 touchscreen resourcesMichael Hennerich1-1/+35
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add support for restart_syscall()Mike Frysinger1-0/+9
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: check for bad syscalls after tracing itMike Frysinger1-9/+14
We want to report all system calls (even invalid ones) to the tracing layers, so check the NR only after we've notified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: fix single stepping over system callsMike Frysinger4-3/+15
On Blackfin systems, the hardware single step exception triggers before the system call exception, so we need to save this info to process it later on. Otherwise, single stepping in userspace misses a few insns right after the system call. This is based a bit on the SuperH code added in commit 4b505db9c4c72dbd. Reported-by: Roland McGrath <roland@redhat.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: initial tracehook supportMike Frysinger6-62/+144
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: initial regset supportMike Frysinger3-31/+97
We don't support core dumps (yet?), but this should make things easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: simplify PTRACE_{PEEK,POKE}USR in preperation for regset supportMike Frysinger2-67/+53
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: simplify SYSCFG code a bit and ignore attempts to change itMike Frysinger1-18/+6
We don't want to let user space modify the SYSCFG register arbitrarily as the settings are system wide (SNEN/CNEN) and can cause misbehavior. The only other bit here (SSSTEP) has proper controls via PTRACE_SINGLESTEP. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: use generic ptrace_resume codeChristoph Hellwig1-44/+0
Use the generic ptrace_resume code for PTRACE_SYSCALL, PTRACE_CONT, PTRACE_KILL and PTRACE_SINGLESTEP. This implies defining arch_has_single_step in <asm/ptrace.h> and implementing the user_enable_single_step and user_disable_single_step functions, which also causes the breakpoint information to be cleared on fork, which could be considered a bug fix. Also the TIF_SYSCALL_TRACE thread flag is now cleared on PTRACE_KILL which it previously wasn't which is consistent with all architectures using the modern ptrace code. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp: add example AD715{0,2}/AD774{5,6,7} IIO resourcesBarry Song1-0/+20
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: rewrite resync_core_{i,d}cache() SMP logic to avoid per_cpu dataGraf Yang4-6/+13
This functions are implicitly called by core functions like cpu_relax(), and since those functions may be called early on before common code has initialized the per-cpu data area, we need to tweak the stats gathering. Now the statistics are maintained in common bss which makes these funcs safe to use as soon as the C runtime env is setup. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add support for cpufreq on SMP systemsGraf Yang4-66/+101
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: rename AD1938 to AD193X in board filesBarry Song1-4/+4
The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add CALLER_ADDR ftrace macrosYi Li1-0/+53
Since GCC doesn't support __builtin_frame_address(n) where n!=0, add our own function to walk the stack frame pointers. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: move KGDB selection to the way other arches do itMike Frysinger2-3/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: split watchdog definitions into a dedicated header fileGraf Yang2-15/+31
This allows things to be shared between the different watchdog sources. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add dma_disable_irq_nosync() API for irq handlersBarry Song1-0/+4
Some IRQ handlers need to disable a DMA channel without waiting. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: fix whitespace damage in thread_info.hMike Frysinger1-12/+11
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: support new ftrace frame pointer semanticsMike Frysinger2-5/+13
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: implement ftrace mcount testMike Frysinger2-1/+11
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: implement ndelay()Barry Song1-2/+14
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: implement nmi_watchdog for SMP on BF561Graf Yang8-1/+361
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: respect the L1 kconfig optimization in the MPU codeBarry Song1-6/+12
Restore support for CONFIG_EXCPT_IRQ_SYSC_L1 in the MPU CPLB manager. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf537-stamp/bf527-ezkit: move ASoC SPORT resources to boards fileBarry Song2-0/+49
Rather than declaring pin resources in the drivers, do it in the board. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: bf548-ezkit: add ASoC CPU DAI resourcesBarry Song1-0/+36
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.