aboutsummaryrefslogtreecommitdiffstats
path: root/arch/c6x (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-10-05libbpf: parse maps sections of varying sizeCraig Gallek1-29/+41
This library previously assumed a fixed-size map options structure. Any new options were ignored. In order to allow the options structure to grow and to support parsing older programs, this patch updates the maps section parsing to handle varying sizes. Object files with maps sections smaller than expected will have the new fields initialized to zero. Object files which have larger than expected maps sections will be rejected unless all of the unrecognized data is zero. This change still assumes that each map definition in the maps section is the same size. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05net: qcom/emac: make function emac_isr staticColin Ian King1-1/+1
The function emac_isr is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warnings: symbol 'emac_isr' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05tcp: a small refactor of RACK loss detectionYuchung Cheng1-22/+18
Refactor the RACK loop to improve readability and speed up the checks. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05tcp: more efficient RACK loss detectionYuchung Cheng1-15/+5
Use the new time-ordered list to speed up RACK. The detection logic is identical. But since the list is chronologically ordered by skb_mstamp and contains only skbs not yet acked or sacked, RACK can abort the loop upon hitting skbs that were sent more recently. On YouTube servers this patch reduces the iterations on write queue by 40x. The improvement is even bigger with large BDP networks. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05tcp: new list for sent but unacked skbs for RACK recoveryEric Dumazet7-16/+74
This patch adds a new queue (list) that tracks the sent but not yet acked or SACKed skbs for a TCP connection. The list is chronologically ordered by skb->skb_mstamp (the head is the oldest sent skb). This list will be used to optimize TCP Rack recovery, which checks an skb's timestamp to judge if it has been lost and needs to be retransmitted. Since TCP write queue is ordered by sequence instead of sent time, RACK has to scan over the write queue to catch all eligible packets to detect lost retransmission, and iterates through SACKed skbs repeatedly. Special cares for rare events: 1. TCP repair fakes skb transmission so the send queue needs adjusted 2. SACK reneging would require re-inserting SACKed skbs into the send queue. For now I believe it's not worth the complexity to make RACK work perfectly on SACK reneging, so we do nothing here. 3. Fast Open: currently for non-TFO, send-queue correctly queues the pure SYN packet. For TFO which queues a pure SYN and then a data packet, send-queue only queues the data packet but not the pure SYN due to the structure of TFO code. This is okay because the SYN receiver would never respond with a SACK on a missing SYN (i.e. SYN is never fast-retransmitted by SACK/RACK). In order to not grow sk_buff, we use an union for the new list and _skb_refdst/destructor fields. This is a bit complicated because we need to make sure _skb_refdst and destructor are properly zeroed before skb is cloned/copied at transmit, and before being freed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05RDS: IB: Initialize max_items based on underlying device attributesAvinash Repaka1-2/+2
Use max_1m_mrs/max_8k_mrs while setting max_items, as the former variables are set based on the underlying device attributes. Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05RDS: IB: Limit the scope of has_fr/has_fmr variablesAvinash Repaka2-7/+6
This patch fixes the scope of has_fr and has_fmr variables as they are needed only in rds_ib_add_one(). Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05net/ipv4: Remove unused variable in route.cTim Hansen1-2/+1
int rc is unmodified after initalization in net/ipv4/route.c, this patch simply cleans up that variable and returns 0. This was found with coccicheck M=net/ipv4/ on linus' tree. Signed-off-by: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05tcp: clean up TFO server's initial tcp_rearm_rto() callWei Wang1-12/+9
This commit does a cleanup and moves tcp_rearm_rto() call in the TFO server case into a previous spot in tcp_rcv_state_process() to make it more compact. This is only a cosmetic change. Suggested-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05tcp: uniform the set up of sockets after successful connectionWei Wang4-24/+17
Currently in the TCP code, the initialization sequence for cached metrics, congestion control, BPF, etc, after successful connection is very inconsistent. This introduces inconsistent bevhavior and is prone to bugs. The current call sequence is as follows: (1) for active case (tcp_finish_connect() case): tcp_mtup_init(sk); icsk->icsk_af_ops->rebuild_header(sk); tcp_init_metrics(sk); tcp_call_bpf(sk, BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB); tcp_init_congestion_control(sk); tcp_init_buffer_space(sk); (2) for passive case (tcp_rcv_state_process() TCP_SYN_RECV case): icsk->icsk_af_ops->rebuild_header(sk); tcp_call_bpf(sk, BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB); tcp_init_congestion_control(sk); tcp_mtup_init(sk); tcp_init_buffer_space(sk); tcp_init_metrics(sk); (3) for TFO passive case (tcp_fastopen_create_child()): inet_csk(child)->icsk_af_ops->rebuild_header(child); tcp_init_congestion_control(child); tcp_mtup_init(child); tcp_init_metrics(child); tcp_call_bpf(child, BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB); tcp_init_buffer_space(child); This commit uniforms the above functions to have the following sequence: tcp_mtup_init(sk); icsk->icsk_af_ops->rebuild_header(sk); tcp_init_metrics(sk); tcp_call_bpf(sk, BPF_SOCK_OPS_ACTIVE/PASSIVE_ESTABLISHED_CB); tcp_init_congestion_control(sk); tcp_init_buffer_space(sk); This sequence is the same as the (1) active case. We pick this sequence because this order correctly allows BPF to override the settings including congestion control module and initial cwnd, etc from the route, and then allows the CC module to see those settings. Suggested-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05VSOCK: add tools/testing/vsock/vsock_diag_testStefan Hajnoczi9-0/+1039
This patch adds tests for the vsock_diag.ko module. These tests are not self-tests because they require manual set up of a KVM or VMware guest. Please see tools/testing/vsock/README for instructions. The control.h and timeout.h infrastructure can be used for additional AF_VSOCK tests in the future. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05VSOCK: add sock_diag interfaceStefan Hajnoczi5-0/+234
This patch adds the sock_diag interface for querying sockets from userspace. Tools like ss(8) and netstat(8) can use this interface to list open sockets. The userspace ABI is defined in <linux/vm_sockets_diag.h> and includes netlink request and response structs. The request can query sockets based on their sk_state (e.g. listening sockets only) and the response contains socket information fields including the local/remote addresses, inode number, etc. This patch does not dump VMCI pending sockets because I have only tested the virtio transport, which does not use pending sockets. Support can be added later by extending vsock_diag_dump() if needed by VMCI users. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05VSOCK: use TCP state constants for sk_stateStefan Hajnoczi8-59/+64
There are two state fields: socket->state and sock->sk_state. The socket->state field uses SS_UNCONNECTED, SS_CONNECTED, etc while the sock->sk_state typically uses values that match TCP state constants (TCP_CLOSE, TCP_ESTABLISHED). AF_VSOCK does not follow this convention and instead uses SS_* constants for both fields. The sk_state field will be exposed to userspace through the vsock_diag interface for ss(8), netstat(8), and other programs. This patch switches sk_state to TCP state constants so that the meaning of this field is consistent with other address families. Not just AF_INET and AF_INET6 use the TCP constants, AF_UNIX and others do too. The following mapping was used to convert the code: SS_FREE -> TCP_CLOSE SS_UNCONNECTED -> TCP_CLOSE SS_CONNECTING -> TCP_SYN_SENT SS_CONNECTED -> TCP_ESTABLISHED SS_DISCONNECTING -> TCP_CLOSING VSOCK_SS_LISTEN -> TCP_LISTEN In __vsock_create() the sk_state initialization was dropped because sock_init_data() already initializes sk_state to TCP_CLOSE. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05VSOCK: move __vsock_in_bound/connected_table() to af_vsock.hStefan Hajnoczi2-10/+12
The vsock_diag.ko module will need to check socket table membership. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05VSOCK: export socket tables for sock_diag interfaceStefan Hajnoczi2-4/+11
The socket table symbols need to be exported from vsock.ko so that the vsock_diag.ko module will be able to traverse sockets. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-05dm raid: fix incorrect status output at the end of a "recover" processJonathan Brassow2-5/+7
There are three important fields that indicate the overall health and status of an array: dev_health, sync_ratio, and sync_action. They tell us the condition of the devices in the array, and the degree to which the array is synchronized. This commit fixes a condition that is reported incorrectly. When a member of the array is being rebuilt or a new device is added, the "recover" process is used to synchronize it with the rest of the array. When the process is complete, but the sync thread hasn't yet been reaped, it is possible for the state of MD to be: mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ] curr_resync_completed = <max dev size> (but not MaxSector) and all rdevs to be In_sync. This causes the 'array_in_sync' output parameter that is passed to rs_get_progress() to be computed incorrectly and reported as 'false' -- or not in-sync. This in turn causes the dev_health status characters to be reported as all 'a', rather than the proper 'A'. This can cause erroneous output for several seconds at a time when tools will want to be checking the condition due to events that are raised at the end of a sync process. Fix this by properly calculating the 'array_in_sync' return parameter in rs_get_progress(). Also, remove an unnecessary intermediate 'recovery_cp' variable in rs_get_progress(). Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-10-04tools: bpftool: add documentationJakub Kicinski5-0/+263
Add documentation for bpftool. Separate files for each subcommand. Use rst format. Documentation is compiled into man pages using rst2man. Signed-off-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04tools: bpf: add bpftoolJakub Kicinski8-3/+1909
Add a simple tool for querying and updating BPF objects on the system. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04tools: rename tools/net directory to tools/bpfJakub Kicinski8-9/+8
We currently only have BPF tools in the tools/net directory. We are about to add more BPF tools there, not necessarily networking related, rename the directory and related Makefile targets to bpf. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04mlxsw: spectrum: Add extack messages for enslave failuresDavid Ahern1-10/+37
mlxsw fails device enslavement for a number of reasons. Use the extack facility to return an error message to the user stating why the enslave is failing. Messages are prefixed with "spectrum" so users know it is a constraint imposed by the hardware driver. For example: $ ip li add br0.11 link br0 type vlan id 11 $ ip li set swp11 master br0 Error: spectrum: Enslaving a port to a device that already has an upper device is not supported. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: bridge: Pass extack to down to netdev_master_upper_dev_linkDavid Ahern4-7/+15
Pass extack arg to br_add_if. Add messages for a couple of failures and pass arg to netdev_master_upper_dev_link. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: bonding: Add extack messages for some enslave failuresDavid Ahern1-0/+7
A number of bond_enslave errors are logged using the netdev_err API. Return those messages to userspace via the extack facility. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: vrf: Add extack messages for enslave errorsDavid Ahern1-2/+11
Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to upper device linkingDavid Ahern19-32/+44
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to ndo_add_slaveDavid Ahern9-13/+22
Pass extack to do_set_master and down to ndo_add_slave Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: Add extack to netdev_notifier_infoDavid Ahern2-33/+56
Add netlink_ext_ack to netdev_notifier_info to allow notifier handlers to return errors to userspace. Clean up the initialization in dev.c such that extack is easily added in subsequent patches where relevant. Specifically, remove the init call in call_netdevice_notifiers_info and have callers initalize on stack when info is declared. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: 8021q: skip packets if the vlan is downVishakha Narvekar1-0/+6
If the vlan is down, free the packet instead of proceeding with other processing, or counting it as received. If vlan interfaces are used as slaves for bonding, with arp monitoring for connectivity, if the rx counter is seen to be incrementing, then the bond device will not observe that the interface is down. CC: David S. Miller <davem@davemloft.net> Signed-off-by: Vishakha Narvekar <Vishakha.Narvekar@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04dev: advertise the new nsid when the netns iface changesNicolas Dichtel4-13/+34
x-netns interfaces are bound to two netns: the link netns and the upper netns. Usually, this kind of interfaces is created in the link netns and then moved to the upper netns. At the end, the interface is visible only in the upper netns. The link nsid is advertised via netlink in the upper netns, thus the user always knows where is the link part. There is no such mechanism in the link netns. When the interface is moved to another netns, the user cannot "follow" it. This patch adds a new netlink attribute which helps to follow an interface which moves to another netns. When the interface is unregistered, the new nsid is advertised. If the interface is a x-netns interface (ie rtnl_link_ops->get_link_net is defined), the nsid is allocated if needed. CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04Update James Hogan's email addressJames Hogan5-6/+8
Update my imgtec.com and personal email address to my kernel.org one in a few places as MIPS will soon no longer be part of Imagination Technologies, and add mappings in .mailcap so get_maintainer.pl reports the right address. Signed-off-by: James Hogan <jhogan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04samples/bpf: use bpf_prog_query() interfaceAlexei Starovoitov1-0/+36
use BPF_PROG_QUERY command to strengthen test coverage Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04libbpf: add support for BPF_PROG_QUERYAlexei Starovoitov2-1/+22
add support for BPF_PROG_QUERY command to libbpf Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04libbpf: sync bpf.hAlexei Starovoitov1-3/+52
tools/include/uapi/linux/bpf.h got out of sync with actual kernel header. Update it. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04samples/bpf: add multi-prog cgroup test caseAlexei Starovoitov2-7/+185
create 5 cgroups, attach 6 progs and check that progs are executed as: cgrp1 (MULTI progs A, B) -> cgrp2 (OVERRIDE prog C) -> cgrp3 (MULTI prog D) -> cgrp4 (OVERRIDE prog E) -> cgrp5 (NONE prog F) the event in cgrp5 triggers execution of F,D,A,B in that order. if prog F is detached, the execution is E,D,A,B if prog F and D are detached, the execution is E,A,B if prog F, E and D are detached, the execution is C,A,B Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04libbpf: introduce bpf_prog_detach2()Alexei Starovoitov2-0/+13
introduce bpf_prog_detach2() that takes one more argument prog_fd vs bpf_prog_detach() that takes only attach_fd and type. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04bpf: enforce return code for cgroup-bpf programsAlexei Starovoitov2-0/+112
with addition of tnum logic the verifier got smart enough and we can enforce return codes at program load time. For now do so for cgroup-bpf program types. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04bpf: introduce BPF_PROG_QUERY commandAlexei Starovoitov7-0/+148
introduce BPF_PROG_QUERY command to retrieve a set of either attached programs to given cgroup or a set of effective programs that will execute for events within a cgroup Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04bpf: multi program support for cgroup+bpfAlexei Starovoitov8-169/+516
introduce BPF_F_ALLOW_MULTI flag that can be used to attach multiple bpf programs to a cgroup. The difference between three possible flags for BPF_PROG_ATTACH command: - NONE(default): No further bpf programs allowed in the subtree. - BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, the program in this cgroup yields to sub-cgroup program. - BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, that cgroup program gets run in addition to the program in this cgroup. NONE and BPF_F_ALLOW_OVERRIDE existed before. This patch doesn't change their behavior. It only clarifies the semantics in relation to new flag. Only one program is allowed to be attached to a cgroup with NONE or BPF_F_ALLOW_OVERRIDE flag. Multiple programs are allowed to be attached to a cgroup with BPF_F_ALLOW_MULTI flag. They are executed in FIFO order (those that were attached first, run first) The programs of sub-cgroup are executed first, then programs of this cgroup and then programs of parent cgroup. All eligible programs are executed regardless of return code from earlier programs. To allow efficient execution of multiple programs attached to a cgroup and to avoid penalizing cgroups without any programs attached introduce 'struct bpf_prog_array' which is RCU protected array of pointers to bpf programs. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> for cgroup bits Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: cache skb_shinfo() in skb_try_coalesce()Eric Dumazet1-13/+16
Compiler does not really know that skb_shinfo(to|from) are constants in skb_try_coalesce(), lets cache their values to shrink code. We might even take care of skb_zcopy() calls later. $ size net/core/skbuff.o.before net/core/skbuff.o text data bss dec hex filename 40727 1298 0 42025 a429 net/core/skbuff.o.before 40631 1298 0 41929 a3c9 net/core/skbuff.o Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04selftests: rtnetlink: try concurrent change of ifaliasFlorian Westphal1-0/+6
to make sure this is serialized correctly. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04rtnetlink: remove __rtnl_af_unregisterFlorian Westphal3-17/+3
switch the only caller to rtnl_af_unregister. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04rtnetlink: remove slave_validate callbackFlorian Westphal2-9/+0
no users in the tree. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04cxgb4vf: make a couple of functions staticColin Ian King1-3/+3
The functions t4vf_link_down_rc_str and t4vf_handle_get_port_info are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 't4vf_link_down_rc_str' was not declared. Should it be static? symbol 't4vf_handle_get_port_info' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04net: core: fix kerneldoc commentFlorian Westphal1-1/+1
net/core/dev.c:1306: warning: No description found for parameter 'name' net/core/dev.c:1306: warning: Excess function parameter 'alias' description in 'dev_get_alias' Fixes: 6c5570016b97 ("net: core: decouple ifalias get/set from rtnl lock") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04ravb: RX checksum offloadSimon Horman1-1/+54
Add support for RX checksum offload. This is enabled by default and may be disabled and re-enabled using ethtool: # ethtool -K eth0 rx off # ethtool -K eth0 rx on The RAVB provides a simple checksumming scheme which appears to be completely compatible with CHECKSUM_COMPLETE: sum of all packet data after the L2 header is appended to packet data; this may be trivially read by the driver and used to update the skb accordingly. In terms of performance throughput is close to gigabit line-rate both with and without RX checksum offload enabled. Perf output, however, appears to indicate that significantly less time is spent in do_csum(). This is as expected. Test results with RX checksum offload enabled: # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo enable_enobufs failed: getprotobyname Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 937.54 Summary of output of perf report: 18.28% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 10.34% ksoftirqd/0 [kernel.kallsyms] [k] __pi_memcpy 9.83% ksoftirqd/0 [kernel.kallsyms] [k] ravb_poll 7.89% ksoftirqd/0 [kernel.kallsyms] [k] skb_put 4.01% ksoftirqd/0 [kernel.kallsyms] [k] dev_gro_receive 3.37% netperf [kernel.kallsyms] [k] __arch_copy_to_user 3.17% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.55% swapper [kernel.kallsyms] [k] tick_nohz_idle_enter 2.04% ksoftirqd/0 [kernel.kallsyms] [k] __pi___inval_dcache_area 2.03% swapper [kernel.kallsyms] [k] _raw_spin_unlock_irq 1.96% ksoftirqd/0 [kernel.kallsyms] [k] __netdev_alloc_skb 1.59% ksoftirqd/0 [kernel.kallsyms] [k] __slab_alloc.isra.83 Test results without RX checksum offload enabled: # /usr/bin/perf_3.16 record -o /run/perf.data -a netperf -t TCP_MAERTS -H 10.4.3.162 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.4.3.162 () port 0 AF_INET : demo enable_enobufs failed: getprotobyname Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 940.20 Summary of output of perf report: 17.10% ksoftirqd/0 [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore 10.99% ksoftirqd/0 [kernel.kallsyms] [k] __pi_memcpy 8.87% ksoftirqd/0 [kernel.kallsyms] [k] ravb_poll 8.16% ksoftirqd/0 [kernel.kallsyms] [k] skb_put 7.42% ksoftirqd/0 [kernel.kallsyms] [k] do_csum 3.91% ksoftirqd/0 [kernel.kallsyms] [k] dev_gro_receive 2.31% swapper [kernel.kallsyms] [k] arch_cpu_idle 2.16% ksoftirqd/0 [kernel.kallsyms] [k] __pi___inval_dcache_area 2.14% ksoftirqd/0 [kernel.kallsyms] [k] __netdev_alloc_skb 1.93% netperf [kernel.kallsyms] [k] __arch_copy_to_user 1.79% swapper [kernel.kallsyms] [k] tick_nohz_idle_enter 1.63% ksoftirqd/0 [kernel.kallsyms] [k] __slab_alloc.isra.83 Above results collected on an R-Car Gen 3 Salvator-X/r8a7796 ES1.0. Also tested on a R-Car Gen 3 Salvator-X/r8a7795 ES1.0. By inspection this also appears to be compatible with the ravb found on R-Car Gen 2 SoCs, however, this patch is currently untested on such hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-04dm crypt: reject sector_size feature if device length is not aligned to itMilan Broz1-0/+4
If a crypt mapping uses optional sector_size feature, additional restrictions to mapped device segment size must be applied in constructor, otherwise the device activation will fail later. Fixes: 8f0009a225 ("dm crypt: optionally support larger encryption sector size") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-10-04ARM: dts: stm32: use right pinctrl compatible for stm32f469Alexandre Torgue7-297/+537
Currently, same stm32f429-pinctrl driver is used for stm32f429 and stm32f469. As pin map is different between those 2 MCUs, a stm32f469-pinctrl driver has been recently added. This patch -allows to use stm32f469-pinctrl driver for stm32f469 boards -reworks stm32 devicetree files to fit with stm32f429 / stm32f469 In the same time it fixes an issue when only MACH_STM32F469 flag is selected in menuconfig. Fixes: d28bcd53fa90 ("ARM: stm32: Introduce MACH_STM32F469 flag") Reported-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-04ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval boardAlexandre Torgue1-3/+1
To declare gpio interrupt line for STMPE1600, 2 possibilities are offered: -use gpio binding (and then the gpiolib interface inside driver) -use interrupt binding as each gpio-controller are also interrupt controller on stm32f429. In STMPE 1600 node both (gpio and interrupt) bindings are defined. This patch fixes this issue and use only interrupt binding. Fixes: c04b2e72af8d ("ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2017-10-04lsm: fix smack_inode_removexattr and xattr_getsecurity memleakCasey Schaufler2-31/+26
security_inode_getsecurity() provides the text string value of a security attribute. It does not provide a "secctx". The code in xattr_getsecurity() that calls security_inode_getsecurity() and then calls security_release_secctx() happened to work because SElinux and Smack treat the attribute and the secctx the same way. It fails for cap_inode_getsecurity(), because that module has no secctx that ever needs releasing. It turns out that Smack is the one that's doing things wrong by not allocating memory when instructed to do so by the "alloc" parameter. The fix is simple enough. Change the security_release_secctx() to kfree() because it isn't a secctx being returned by security_inode_getsecurity(). Change Smack to allocate the string when told to do so. Note: this also fixes memory leaks for LSMs which implement inode_getsecurity but not release_secctx, such as capabilities. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-10-03cxgb4: add new T6 pci device id'sGanesh Goudar1-0/+1
Add 0x6085 T6 device id. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-03ARM: defconfig: update Gemini defconfigLinus Walleij1-1/+2
This updates the Gemini defconfig with drivers merged for v4.13 or v4.14: - ATA driver is merged - DMA driver is merged - RTC driver gets selected from default Kconfig Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.