aboutsummaryrefslogtreecommitdiffstats
path: root/arch/ia64 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2007-05-08[IA64] - Altix: hotplug after intr redirect can crash systemJohn Keller1-15/+43
When redirecting a device interrupt on SN, not all links between platform specific structures are being updated. This can result in a system crash if an interrupt redirection is followed by an unplug of that device. The complete fix also requires a prom update. Though, this patch is backward compatable and not dependent on the prom patch. Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-08[IA64] save and restore cpus_allowed in cpu_idle_waitSiddha, Suresh B1-0/+2
Save and Restore the task's cpus_allowed mask, across the set_cpus_allowed() in cpu_idle_wait(). Without this, we will endup corrupting task's cpu affinity. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-08[IA64] Removal of percpu TR cleanup in kexec codeTony Luck1-10/+1
The kexec code wasn't in the kernel when Ken Chen created this patch (00b65985fb2fc542b855b03fcda0d0f2bab4f442) to change the mapping of percpu area from a TR to a TC. Zou Nanhai spotted this extra piece, and Simon Horman concurred. Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-07[IA64] Fix some section mismatch errorsTony Luck2-2/+2
Section mismatch: reference to ... .init.text:prefill_possible_map from .text between 'setup_per_cpu_areas' and 'cpu_init' .init.text:iosapic_override_isa_irq from .text between 'iosapic_init' and 'iosapic_remove' Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds14-65/+461
* git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] update memory attribute aliasing documentation & test cases [IA64] fail mmaps that span areas with incompatible attributes [IA64] allow WB /sys/.../legacy_mem mmaps [IA64] make ioremap avoid unsupported attributes [IA64] rename ioremap variables to match i386 [IA64] relax per-cpu TLB requirement to DTC [IA64] remove per-cpu ia64_phys_stacked_size_p8 [IA64] Fix example error injection program [IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interface [IA64] Itanium MC Error Injection Tool: Makefile changes [IA64] Itanium MC Error Injection Tool: Driver sysfs interface [IA64] Itanium MC Error Injection Tool: Doc and sample application [IA64] Itanium MC Error Injection Tool: Kernel configuration
2007-05-07get_unmapped_area handles MAP_FIXED on ia64Benjamin Herrenschmidt2-0/+15
Handle MAP_FIXED in ia64 arch_get_unmapped_area and hugetlb_get_unmapped_area(), just call prepare_hugepage_range in the later and is_hugepage_only_range() in the former. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07Make page->private usable in compound pagesChristoph Lameter1-1/+1
If we add a new flag so that we can distinguish between the first page and the tail pages then we can avoid to use page->private in the first page. page->private == page for the first page, so there is no real information in there. Freeing up page->private makes the use of compound pages more transparent. They become more usable like real pages. Right now we have to be careful f.e. if we are going beyond PAGE_SIZE allocations in the slab on i386 because we can then no longer use the private field. This is one of the issues that cause us not to support debugging for page size slabs in SLAB. Having page->private available for SLUB would allow more meta information in the page struct. I can probably avoid the 16 bit ints that I have in there right now. Also if page->private is available then a compound page may be equipped with buffer heads. This may free up the way for filesystems to support larger blocks than page size. We add PageTail as an alias of PageReclaim. Compound pages cannot currently be reclaimed. Because of the alias one needs to check PageCompound first. The RFC for the this approach was discussed at http://marc.info/?t=117574302800001&r=1&w=2 [nacc@us.ibm.com: fix hugetlbfs] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-02MSI: arch must connect the irq and the msi_descMichael Ellerman1-2/+2
set_irq_msi() currently connects an irq_desc to an msi_desc. The archs call it at some point in their setup routine, and then the generic code sets up the reverse mapping from the msi_desc back to the irq. set_irq_msi() should do both connections, making it the one and only call required to connect an irq with it's MSI desc and vice versa. The arch code MUST call set_irq_msi(), and it must do so only once it's sure it's not going to fail the irq allocation. Given that there's no need for the arch to return the irq anymore, the return value from the arch setup routine just becomes 0 for success and anything else for failure. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02msi: introduce ARCH_SUPPORTS_MSI Kconfig option (rev2)Dan Williams1-0/+1
Allows architectures to advertise that they support MSI rather than listing each architecture as a PCI_MSI dependency. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02PCI: Cleanup the includes of <linux/pci.h>Jean Delvare2-2/+0
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-30Pull mem-attribute into release branchTony Luck3-19/+107
2007-04-30Pull percpu-dtc into release branchTony Luck7-46/+49
2007-04-30Pull error-inject into release branchTony Luck4-0/+305
2007-04-27[AF_RXRPC/AFS]: Arch-specific fixes.David Howells1-0/+2
Fixes for various arch compilation problems: (*) Missing module exports. (*) Variable name collision when rxkad and af_rxrpc both built in (rxrpc_debug). (*) Large constant representation problem (AFS_UUID_TO_UNIX_TIME). (*) Configuration dependencies. (*) printk() format warnings. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_to_linear_data{_offset}Arnaldo Carvalho de Melo2-2/+2
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo1-1/+2
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[SK_BUFF]: Convert skb->end to sk_buff_data_tArnaldo Carvalho de Melo1-3/+3
Now to convert the last one, skb->data, that will allow many simplifications and removal of some of the offset helpers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Convert skb->tail to sk_buff_data_tArnaldo Carvalho de Melo1-5/+5
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo2-2/+0
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-06[IA64] SGI Altix : fix pcibr_dmamap_ate32() bugMike Habeck1-2/+6
On a SGI Altix TIOCP based PCI bus we need to include the ATE_PIO attribute bit if we're mapping a 32bit MSI address. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-06[IA64] Fix CPU freq displayed in /proc/cpuinfoVenki Pallipadi1-1/+1
My patch: git commit=95235ca2c20ac0b31a8eb39e2d599bcc3e9c9a10 introduced a bug in IA64 cpuinfo output. Patch changed the proc_freq from 1HZ resolution to 1KHz resolution, but left format string unchanged at " %lu.%06lu". Below is the fix. Thanks to Bjorn for catching this. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-06[IA64] Fix wrong assumption about irq and vector in msi_ia64.cIshimatsu Yasuaki1-2/+2
This patch fixes a wrong assumption in ia64 MSI code that IRQ equals vector. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-06[IA64] BTE error timer fixRuss Anderson1-3/+3
The bte recovery_timer was not being set correctly. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-30[IA64] fail mmaps that span areas with incompatible attributesBjorn Helgaas1-3/+43
Example memory map (from HP sx1000 with VGA enabled): 0x00000 - 0x9FFFF supports only WB (cacheable) access 0xA0000 - 0xBFFFF supports only UC (uncacheable) access 0xC0000 - 0xFFFFF supports only WB (cacheable) access Some versions of X map the entire 0x00000-0xFFFFF area at once. With the example above, this mmap must fail because there's no memory attribute that's safe for the entire area. Prior to this patch, we performed the mmap with a UC mapping. When X accessed the WB memory at 0xC0000, it caused an MCA. The crash can happen when mapping 0xC0000 from either /dev/mem or a /sys/.../legacy_mem file. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-30[IA64] allow WB /sys/.../legacy_mem mmapsBjorn Helgaas1-2/+0
Allow cacheable mmaps of legacy_mem if WB access is supported for the region. The "legacy_mem" file often contains a shadow option ROM, and some versions of X depend on this. Tim Yamin <plasm@roo.me.uk> reported that this change fixes X on a Dell PowerEdge 3250. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-30[IA64] make ioremap avoid unsupported attributesBjorn Helgaas1-5/+55
Example memory map (from HP sx1000 with VGA enabled): 0x00000 - 0x9FFFF supports only WB (cacheable) access 0xA0000 - 0xBFFFF supports only UC (uncacheable) access 0xC0000 - 0xFFFFF supports only WB (cacheable) access pci_read_rom() indirectly uses ioremap(0xC0000) to read the shadow VGA option ROM. ioremap() used to default to a 16MB or 64MB UC kernel identity mapping, which would cause an MCA when reading 0xC0000 since only WB is supported there. X uses reads the option ROM to initialize devices. A smaller test case is: # echo 1 > /sys/bus/pci/devices/0000:aa:03.0/rom # cp /sys/bus/pci/devices/0000:aa:03.0/rom x To avoid this, we can use the same ioremap_page_range() strategy that most architectures use for all ioremaps. These page table mappings come out of the vmalloc area. On ia64, these are in region 5 (0xA... addresses) and typically use 16KB or 64KB mappings instead of 16MB or 64MB mappings. The smaller mappings give more flexibility to use the correct attributes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-30[IA64] rename ioremap variables to match i386Bjorn Helgaas1-13/+13
No functional change, just use the same names as i386. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-29[IA64] Fix arch/ia64/pci/pci.c:571: warning: `return' with a valueTony Luck1-1/+0
Typo/thinko in bba6f6fc68e74d4572028646f61dd3505a68747e Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-29[IA64] Speed up boot - skip unnecessary clock calibrationJack Steiner1-1/+16
Skip clock calibration if cpu being brought online is exactly the same speed, stepping, etc., as the previous cpu. This significantly reduces the time to boot very large systems. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-29[IA64] bugfix stack layout upside-downKAMEZAWA Hiroyuki1-1/+1
ia64 expects following vm layout: == low memory [register-stack grows up] [memory-stack grows down] == high memory But the code assigns the base of the register stack at the maximum stack size offset from the fixed address where the stack *might* start. Stack randomization will result in the memory stack starting at a lower address than this, and if the user has set a low stack limit with "ulimit -s", then you can end up with the register stack above the memory stack (or if you were very unlucky right on top of it!). Fix: Calculate the base address for the register stack starting from the actual address of the memory stack. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-29[IA64] Fix possible invalid memory access in ia64_setup_msi_irq()Kenji Kaneshige1-1/+1
The following 'if' statement in ia64_setup_msi_irq() always fails even if create_irq() returns <0 value, because variable 'irq' is defined as unsigned int. It would cause invalid memory access. irq = create_irq(); if (irq < 0) return irq; Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-28[PATCH] MSI-X: fix resume crashEric W. Biederman1-2/+6
So I think the right solution is to simply make pci_enable_device just flip enable bits and move the rest of the work someplace else. However a thorough cleanup is a little extreme for this point in the release cycle, so I think a quick hack that makes the code not stomp the irq when msi irq's are enabled should be the first fix. Then we can later make the code not change the irqs at all. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds1-0/+1
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: IA64: fix %ll build warnings ACPI: IA64: fix allnoconfig build ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M) ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) ACPI: parse 2nd MADT by default ACPICA: revert "acpi_serialize" changes sony-laptop: MAINTAINERS fix entry, add L: and W: ACPI: resolve HP nx6125 S3 immediate wakeup regression ACPI: Add support to parse 2nd MADT
2007-03-20[IA64] Fix wrong /proc/iomem on SGI AltixBernhard Walle1-2/+10
In sn_io_slot_fixup(), the parent is re-set from the bus to io(port|mem)_resource because the address is changed in a way that it's not child of the bus any more. However, only the root is set but not the parent/child/sibling relationship in the resource tree which causes 'cat /proc/iomem' to stop after this memory area. Depding on the poition in the tree the iomem may be nearly completely empty. Signed-off-by: Bernhard Walle <bwalle@suse.de> Acked-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Altix: ioremap vga_console_iobaseJohn Keller1-3/+3
When booting an SN system without specifing a console (i.e., no "console=" on boot line), the system will hang during boot at the point where /sbin/init is run. The problem is that vga_console_iobase is not converted to a virtual address before storing in io_space[0].mmio_base. The conversion was happening in sn_scan_pcdp(), but not in setup_vga_console(). Signed-off-by: John Keller <jpk@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Fix typo/thinko in crash.cJay Lan1-1/+1
Clearly should be checking for "val == DIE_INIT_SLAVE_ENTER". Signed-off-by: Jay Lan <jlan@sgi.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] Fix get_model_name() for mixed cpu type systemsJack Steiner1-7/+15
If a system consists of mixed processor types, kmalloc() can be called before the per-cpu data page is initialized. If the slab contains sufficient memory, then kmalloc() works ok. However, if the slabs are empty, slab calls the memory allocator. This requires per-cpu data (NODE_DATA()) & the cpu dies. Also noted by Russ Anderson who had a very similar patch. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20[IA64] min_low_pfn and max_low_pfn calculation fixZou Nan hai3-27/+23
We have seen bad_pte_print when testing crashdump on an SN machine in recent 2.6.20 kernel. There are tons of bad pte print (pfn < max_low_pfn) reports when the crash kernel boots up, all those reported bad pages are inside initmem range; That is because if the crash kernel code and data happens to be at the beginning of the 1st node. build_node_maps in discontig.c will bypass reserved regions with filter_rsvd_memory. Since min_low_pfn is calculated in build_node_map, so in this case, min_low_pfn will be greater than kernel code and data. Because pages inside initmem are freed and reused later, we saw pfn_valid check fail on those pages. I think this theoretically happen on a normal kernel. When I check min_low_pfn and max_low_pfn calculation in contig.c and discontig.c. I found more issues than this. 1. min_low_pfn and max_low_pfn calculation is inconsistent between contig.c and discontig.c, min_low_pfn is calculated as the first page number of boot memmap in contig.c (Why? Though this may work at the most of the time, I don't think it is the right logic). It is calculated as the lowest physical memory page number bypass reserved regions in discontig.c. max_low_pfn is calculated include reserved regions in contig.c. It is calculated exclude reserved regions in discontig.c. 2. If kernel code and data region is happen to be at the begin or the end of physical memory, when min_low_pfn and max_low_pfn calculation is bypassed kernel code and data, pages in initmem will report bad. 3. initrd is also in reserved regions, if it is at the begin or at the end of physical memory, kernel will refuse to reuse the memory. Because the virt_addr_valid check in free_initrd_mem. So it is better to fix and clean up those issues. Calculate min_low_pfn and max_low_pfn in a consistent way. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Acked-by: Jay Lan <jlan@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-20Pull misc-for-upstream into release branchLen Brown1-0/+1
2007-03-19ACPI: IA64: fix allnoconfig buildLen Brown1-0/+1
The evils of Kconfig's select bite us once again... ia64/Kconfig selects ACPI, which depends on PM. But select ignores dependencies, allnoconfig chooses CONFIG_PM=n, and thus the menu of sub-options under ACPI vanish, which breaks the build. Manually select PM along with ACPI for now. Some day, we should delete them both, or fix select. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-18[PATCH] Fix wrong /proc/iomem on SGI AltixBernhard Walle1-2/+10
In sn_io_slot_fixup(), the parent is re-set from the bus to io(port|mem)_resource because the address is changed in a way that it's not child of the bus any more. However, only the root is set but not the parent/child/sibling relationship in the resource tree which causes 'cat /proc/iomem' to stop after this memory area. Depding on the poition in the tree the iomem may be nearly completely empty. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: John Keller <jpk@sgi.com> Cc: Jay Lan <jlan@engr.sgi.com> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-09Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds8-240/+774
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] refresh config files [IA64] put kdump_find_rsvd_region in __init [IA64] Remove sparse warning from unwind code [IA64] add missing syscall trace clear [IA64] Cleanup in crash.c [IA64] kexec: declare ia64_mca_pal_base in mca.h rather than kexec.h [IA64] pci_get_legacy_ide_irq should return irq (not GSI) [IA64] whitespace fixes for include/asm-ia64/sal.h [IA64] Cache error recovery [IA64] Proper handling of TLB errors from duplicate itr.d dropins
2007-03-09Pull altix into release branchLen Brown2-22/+24
2007-03-08[IA64] refresh config filesTony Luck3-207/+721
Bring defconfig, tiger_defconfig and zx1_defconfig up to date. Also sprinkle KEXEC and KDUMP combinations around liberally so that my usual regression test builds will see all combinations: tiger_defconfig gets KEXEC=y, CRASH_DUMP=n zx1_defconfig gets KEXEC=n, CRASH_DUMP=y defconfig gets KEXEC=y, CRASH_DUMP=y others remain at KEXEC=n, CRASH_DUMP=n Signed-off-by: Tony Luck <tomy.luck@intel.com>
2007-03-08[IA64] put kdump_find_rsvd_region in __initHorms1-1/+1
kdump_find_rsvd_region() is only called by reserve_memory() which is in __init, so it seems that kdump_find_rsvd_region() should also be in there. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-08[IA64] add missing syscall trace clearAkiyama, Nobuyuki1-0/+1
The ptrace misses clearing the syscall trace flag. The increased syscall overhead is retained after the trace is finished. This case happens when strace is terminated by force. Signed-off-by: Akiyama, Nobuyuki <akiyama.nobuyuk@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-08[IA64] Cleanup in crash.cSimon Horman1-5/+5
Grammatical fixes (s/freezed/frozen/) Make some variables static Change a C++ "//" comment to "/* ... */" Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-08[IA64] Cache error recoveryRuss Anderson1-21/+11
Similar to memory error recovery, when a cache error is consumed by a user process terminate the user instead of crashing the system. Signed-off-by: Russ Anderson (rja@sgi.com) Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-08[IA64] Proper handling of TLB errors from duplicate itr.d dropinsRuss Anderson2-6/+35
Jack Steiner noticed that duplicate TLB DTC entries do not cause a linux panic. See discussion: http://www.gelato.unsw.edu.au/archives/linux-ia64/0307/6108.html The current TLB recovery code is recovering from the duplicate itr.d dropins, masking the underlying problem. This change modifies the MCA recovery code to look for the TLB check signature of the duplicate TLB entry and panic in that case. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-07[IA64] fsys_getcpu for IA64Fenghua Yu2-0/+106
On 1.6GHz Montectio Tiger4, the following performance data is measured with kernel built with defconfig which has NUMA configured: Fastest sys_getcpu: 502 itc counts. Fastest fsys_getcpu: 28 itc counts. fsys_getcpu performance is largly impacted by whether data (node_to_cpu_map etc) is in cache. It can take fsys_getcpu up to ~150 itc counts in cold cache case. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>